Tender for Supply of material, Erection, Testing and Commissioning for SOP to CHC Gopalpur by providing 11 KV HT Line. 11/0.4 KV, 100 KVA S/stn. a/w 3 phase LT Line a/w service connection in (E) Section Gopalpur under ESD No-II Palampur

Amount

Prov. Steel Tubular Pole 9 mtr. Long w/l 200 kg.

Providing of RCC pipe (Muff) ISI marked suitable for different size of steel poles 2000mm in length and 25mm thick with 250mm internal dia duly fabricated by using un-galvanized MS wire of 12 SWG Rings and 6mm MS Round in vertical direction conforming to IS 458-1988 or latest version if any. After erection of Muff the cavity between pole and muff be filled up with cement concrete 1:2:4 as per specification of HPSEBL and curing complete in all respect.

Prov.Coil earthing for Steel Pole

Providing M.S.Channel 100x50x5 mm Cross Arms 2400 mm Long suitable for fixing on both Steel and PCC Poles Whatso ever is required Single/Double pole Structure,11 KV line with holes at suitable places where ever is required to adjust 5/8" dia nuts and bolts,Pin Insulator,Ball cleaves,eye socket and washers confirming to REC specifications.The weight of M.S Channel should be strictly 9.56 Kg per meter with variation of +/-5%.The Cross Arm should be duly painted with two coat red oxide paint of superior quality.

Prividing M.S Channel 100x50x6 mm Cross arm 1500 mm long suitable for fixing on both Steel & PCC Poles whatever is required Single & Double Pole Str 11 KV Lines with holes at suitable places whereever is required to adjust 5/8" dia nuts & bolts,Pin Insulators,Ball Cleaves eye shoucket & washers the Weight of M.S Channel should strictly 9.56 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality( Tfr.Base Main Channel)

Providing M.S.Channel 100x50x5 mm Cross Arms 2800 mm Long suitable for fixing on both Steel and PCC Poles Whatso ever is required Single/Double pole Structure,11 KV line with holes at suitable places where ever is required to adjust 5/8" dia nuts and bolts,Pin Insulator,Ball cleaves,eye socket and washers confirming to REC specifications.The weight of M.S Channel should be strictly 9.56 Kg per meter with variation of +/-5%.The Cross Arm should be duly painted with two coat red oxide paint of superior quality.

Prov. A.I Bracing Set (270x100x50mm) for single pole

Prov. A.I Bracing Set 2x(750x50x50mm) for single pole

Providing H.T. Stay set made of M.S.round 1800 mm in length and 18 mm dia having threaded up to 300 mm on one end with one nut and one check nut to aviod slippage and an eye of 40 mm dia on other side and welded confirming to REC specification. Elbow made of M. S Channel Iron 75 x 40x 6 mm, 250 mm long and M.S Round 18 mm dia, vertical height 450 mm, both ends bend after putting in two holes in Channel Iron taking the ends out 25 mm minimum in length and welded with Channel iron one anchor of Angle Iron 65 x 65x6 mm,750 mm in length with one hole of 20 mm dia in the centre including gay assembly .The complete stay set shall be painted with superior quality black Japan paint.

Providing Pin Insulator with Pin hellically formed fitting (set of 3 No.)

Providing Disc Insulator set cleaves and tongue hellically formed fitting

Providing Barbed wire as per REC specification and satisfaction of Engineer In Charge including all type of leat lift etc.

Providing M.S. Black Hexagon Bolts and Nuts, threaded in diameters and length given below conforming to ISI-1363-1992 duly threaded with ISI mark.

Prov. Stay Wire 7/8 SWG

Providing Earth Hook

Providing Danger Plate

Prov. G I Wire 8 SWG

Providing alluminium paint of superior quality

Prov. GO Switch 400Amp

Prov. AAAC 7/3.15 mm (50 mm2)

Providing 11/0.4 KV ,100 KVA Transformer

Providing ST Pole 9 mtr. Long

Providing H.T. Stay set made of M.S.round 1800 mm in length and 18 mm dia having threaded up to 300 mm on one end with one nut and one check nut to aviod slippage and an eye of 40 mm dia on other side and welded confirming to REC specification. Elbow made of M. S Channel Iron 75 x 40x 6 mm, 250 mm long and M.S Round 18 mm dia, vertical height 450 mm, both ends bend after putting in two holes in Channel Iron taking the ends out 25 mm minimum in length and welded with Channel iron one anchor of Angle Iron 65 x 65x6 mm,750 mm in length with one hole of 20 mm dia in the centre including gay assembly .The complete stay set shall be painted with superior quality black Japan paint.

Providing of RCC pipe (Muff) ISI marked suitable for different size of steel poles 2000mm in length and 25mm thick with 250mm internal dia duly fabricated by using un-galvanized MS wire of 12 SWG Rings and 6mm MS Round in vertical direction conforming to IS 458-1988 or latest version if any. After erection of Muff the cavity between pole and muff be filled up with cement concrete 1:2:4 as per specification of HPSEBL and curing complete in all respect.

Prov.earth electrod i.e. GI pipe 38 mm dia 3 mtr long and prov. and placing in position into excavated earth pit, filling of kalmi sora 1.5 kg , charcol 60 kg and salt 60 kg in each pit along with GI Wire as required and then filling of pit with soil thereof. Complete in all respect.

Prividing M.S Channel 100x50x6 mm Cross arm 2800 mm long suitable for fixing on both Steel & PCC Poles whatever is required Single & Double Pole Str 11 KV Lines with holes at suitable places whereever is required to adjust 5/8" dia nuts & bolts,Pin Insulators,Ball Cleaves eye shoucket & washers the Weight of M.S Channel should strictly 9.56 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality( Tfr.Base Main Channel)

Prividing M.S Channel 100x50x6 mm Cross arm 460 mm long suitable for supporting Main Channel of Transformer the Weight of M.S Channel should strictly 9.56 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( For supporting main Channel of Tfr)

Prividing Angle Iron 50x50x6 mm Cross arm 2800 mm long suitable for Transformer belting the Weight of A.I.Should strictly 4.50 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( For Tfr Belting)

Prividing Angle Iron 35x35x6 mm Cross arm 460 mm long suitable for Transformer belting the Weight of A.I.Should strictly 3.00 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( For Tfr Belting )

Prividing M.S Channel 75x40x6 mm Cross arm 2800 mm long suitable for Fuse Unit/AB Switch the Weight of M.S Channel should strictly 7.14 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( Fuse Unit/ AB switch )

Providing Angle Iron 50x50x6 mm Cross arm 2800 mm long suitable for Lightening Arrestors the Weight of A.I.Should strictly 4.50 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( For Lightining Arrestor )

Providing M.S. Black Hexagon Bolts and Nuts, threaded in diameters and length given below conforming to ISI-1363-1992 duly threaded with ISI mark.

Providing Half clamp MS Flat 50x6 mm as per specification and satisfacation of Engineer - in - charges

Providing of L.T.Distribution Pannel box suitable for 100 KVA Transformer/Sub Station of Size 900x800x200mm+/-5% made of Steel Sheet of 1.63 mm thickness having double door locking arrangementt duly Powder Coated Painted complete with MCCB 100 Amp 415 V of L&T/Crompton Greaves make having thermal current 150 Amps confirming to latest version of IS:2516 (partI&II) of 1985 or latest version thereof. Rectangular type Alluminium Alloy Bus Bars of 100 Amp having length 600mm for Phase,450mm Long for Neutral outgoing feeders 2 Nos, outgoing feeders shall be made in the panel U Type rewireable Kit Kats fuses of 200 Amp shall be provided in all three phases.The panel shall be fully wired with insulated copper wire shall have adequate clearance as per specifications

Providing Barbed wire as per REC specification and satisfaction of Engineer In Charge including all type of leat lift etc.

Provding Lightning Arrestor as per REC specification 10/176 and ISI no 3070/1974 and as per satisfication of Engineer - in - Charge

Providing Disc insulator with fiting

Providing Stay wire 7/3.15 mm @ 8 kg. per Stay Set

Providing aluminium paint of superior quality

Prov. G.O Switch for S/Stn.

Prov. A.Thimble

Prov. D.O Fuse unit

Prov.Danger Plate

Prov. Energy meter 3-P, 4 wire 200/5 amp.

Prov. LT cable 3.5 core 95mm

Prov. Lead Tin Solder 60:40

Prov. Solder Flux

Prov. CT/PT Unit 50/5 A

Prov. Trivector Meter 50/5 A

Prov. C.I (2800x100x50 mm for X-Arm CT/PT Base Chanel

Prov. C.I (460x100x50 mm for suporting main Chanel

Prov. Cable End Box heat shrink type 95 mm2

Prov. Control Cable multi core

Civil work i.e Transformer plinth etc.

Prov. ST Pole 8 mtr. Long

Providing of RCC pipe (Muff) ISI marked suitable for different size of steel poles 1800mm in length and 25mm thick with 250mm internal dia duly fabricated by using un-galvanized MS wire of 12 SWG Rings and 6mm MS Round in vertical direction conforming to IS 458-1988 or latest version if any. After erection of Muff the cavity between pole and muff be filled up with cement concrete 1:2:4 as per specification of HPSEBL and curing complete in all respect.

Providing L.T. Stay set made of M.S.round 1600 mm in length and 16 mm dia having threads up to 300 mm on one end with one nut and one check nut to aviod slippage and and eye of 40 mm dia on other side and welded confirming to REC specification. Elbow made of M. S Channel Iron 75 x 40x 6 mm, 250 mm long and M.S Round 18 mm dia, vertical height 300 mm, both ends bend after putting in two holes in Channel Iron taking the ends out 25 mm minimum in length and welded with Channel iron. One anchor of Angle Iron 50 x 50 x6 mm,75 mm in length with one hole of 20 mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint.

Providing aluminium paint of superior quality

Providing M.S. Black Hexagon Bolts and Nuts, threaded in diameters and length given below conforming to ISI-1363-1992 duly threaded with ISI mark.

Providing Shackle Insulator with D-Iron complete in all respect.

Providing G.I Wire 8 SWG

Prov AAAC 7/3.15 mm (50 mm2 )

Prov. Egg Insulator

Providing Stay Wire 7/3.15 mm

Providing Eye Hook

Providing C.I.X-Arm 600x75x40

Providing LT Spacer

AGR Engineers

Gurmail Singh Electrical Cont And Supplier