Loading
Loading…
Loading…
Tender ID
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 LAccepted-Finance BASEMENT B 724 SADARJUNG ENCLAVE NEW DELHI 110029 | SOUTH | DELHI | 110029 | L1 | Accepted-Finance Selected | |
| 2 | L2₹3.2 L+₹37,925.58 (13.5%)Accepted-Finance 272 VIKAS KUNJ VIKAS PURI NEW DELHI 110018 | WEST | DELHI | 110018 | L2 | Accepted-Finance Selected | |
| 3 | L3₹3.7 L+₹87,549.87 (31.1%)Accepted-Finance 0 DOGRA CHOWK JEWEL JAMMU JAMMU JAMMU KASHMIR 180011 | JAMMU | JAMMU AND KASHMIR | 180011 | L3 | Accepted-Finance Selected | |
| 4 | L4₹4.0 L+₹1.1 L (40.6%)Accepted-Finance A 6 STREET NO 2 JAGAT PURI DELHI 110051 | SHAHDARA | DELHI | 110051 | L4 | Accepted-Finance Selected | |
| 5 | L5₹4.0 L+₹1.2 L (43.1%)Accepted-Finance 121 RANI DURGAWATI WARD NO 34 H S S SCHOOL SHOBHAPUR BETUL MADHYA PRADESH 460449 | BETUL | MADHYA PRADESH | 460449 | L5 | Accepted-Finance Selected |
Tender Value
₹5.4 L
EMD Value
₹10,883
Closing Date
22 Apr 2026, 3:00 pmClosed
Assistant Engineer(E), PWD EMSD-III South East, Su
Assistant Engineer(E), PWD EMSD-III South East, Sunlight Colony
RMO various E and M services in various Delhi Govt Offices under AE E EMSD III South East Sunlight Colony New Delhi
2026_PWD_289934_1
Recall147/EE(E)/AE(E)-III/EMD South East/PWD/2025-26
Open Tender
Electrical Works
Percentage
30 days
As per site
Please refer Tender documents.
13 documents required · 13 mandatory
₹0
₹10,883
Yes
23 Apr 2026
16 Apr 2026
22 Apr 2026
16 Apr 2026
22 Apr 2026
16 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Servicing of 630Amps, 3 Phase, 11 KV, HT VCB, complete with removal from HT panel, opening the required parts for servicing, checking, cleaning, testing & rectification of defects, oiling, greasing of moving gear assembly and arc contacts with CR-2 spray and cadmium solution i/c re-assembling, re-installation in HT panel, re-commissioning etc as reqd. | - | Nos. | - | - |
| - | Servicing of 630/800 Amps capacity, 3phase, 415 Volt withdrawal type MV ACB complete with removal from panel board, opening/ dismantling the required parts for servicing, checking, cleaning, testing & rectification of defects, oiling greasing moving gear assembly and arc contacts with CR-2 spray and cadmium solution & checking & cleaning of LT panel board in respect of each LT breaker by opening of LT panel & CT’s chamber removing the dust with vacuum cleaner, checking, cleaning & decarbonizing the LT panel, fixed contacts of switchgear & CT’s with CTC/ CRC tightening of contacts & joints of bus-bar CT & PT connections, tightening of cable end termination replacement of burnt/ heated thimbles, nuts, bolts, LT tapping i/c testing, commissioning, re-assembling, reinstallation in panel board etc complete as reqd. | - | Nos. | - | - |
| - | Testing and calibration of IDMT relay set having 2 Nos. O/L and one No. earth fault relay installed in the existing HT panel by secondary injection method, cleaning the contacts, resetting with required accuracy complete checking & setting of control wiring i/c refixing of the relay unit etc complete as reqd. | - | Nos. | - | - |
| - | Supplying, Fixing, Testing and Commissioning of IDMT relay set having 2 Nos. O/L and one No. earth fault relay installed in the existing HT panel by secondary injection method, cleaning the contacts, resetting with required accuracy complete checking & setting of control wiring i/c refixing of the relay unit etc complete as reqd. | - | No. | - | - |
| - | Serviceing and cleaning of LT panel, AMF panel, emergency panel, capacitor panel i/c MCCB, busbar, cable termination complete etc as reqd. | - | Job | - | - |
| - | Providing and fixing 400-420 Amp rating 4 pole contactor with 2 NO and 2 NC auxilliary contacts in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. | - | No. | - | - |
| - | Supplying and fixing insulator in existing VCB/HT panel and connect properly to VCB etc complete as reqd. | - | Nos. | - | - |
| - | Supplying and fixing vacuum interrupter in existing VCB/HT panel and connect properly to VCB etc complete as reqd. | - | Set | - | - |
| - | supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:a) 240 sq. mm | - | Set | - | - |
| - | Supplying Installation Testing and Commissioing indication lamp complete as reqd. | - | Nos. | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.53 MB
BOQ_384950.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .