Providing fresh water supply to Indian Navy at Madhusudhan Jetty in Chennai Port Authority under two cover system

Cost for the Supply of G.I.Pipe - 4” dia.-‘C’ Class as per IS 1239 (Part-I)

Cost for the Supply of M.S Flange suitable for 4” dia G.I.Pipe with necessary bolts,nuts and washers

Cost for the Supply of M.S.Gate Valve with flange end - 4” dia.

Cost for the Supply of G.I.Tee – 4” x 4” x 4” with flange end

Cost for the Supply of G.I. Reducer - 4” x 3” with flange end

Cost for the Supply of G.I. Elbow – 4” dia -‘C’ Class as per IS 1239.

Cost for the Supply of M.S Flange Dummy suitable for 4” dia Flange

Cost for the Supply of G.I.long Bend – 4” dia -‘C’ Class as per IS 1239.

Cost for the Supply of G.I.Pipe – 3” dia.-‘C’ Class as per IS 1239 (Part-I)

Cost for the Supply of M.S Flange suitable for 3” dia G.I.Pipe with necessary bolts,nuts and washers

Cost for the Supply of Gate Valve with flange end - 3” dia. with flange end

Cost for the Supply of G.I.Tee – 3” x 3” x 2” with flange end

Cost for the Supply of G.I.Tee - 3” x 3” x 3” with flange end

Cost for the Supply of G.I.long Bend – 3” dia -‘C’ Class as per IS 1239.

Cost for the Supply of M.S Flange Dummy suitable for 3” dia Flange

Cost for the Supply of G.I.Pipe – 2” dia.-‘C’ Class as per IS 1239 (Part-I)

Cost for the Supply of Butterfly Valve- 2” dia. With suitable bolt and nuts

Cost for the Supply of Indian Insertion Rubber (white) 3 mm thick x 3’ width

Cost for the Supply of Required material for Concrete RAMP for a length of 7.5 Mtrs. with a height of minimum 10” at 4 places.

Cost for the Supply of Water Meter – 4” dia., Non-Magnetic Type with ISI Mark as per IS2373

Charges for the Earthwork of size 1m x 1m x 1m shall be carried out

Charges for the Cutting of concrete floor of size 1m x 1m x 1m and refill with concrete mixture.

Charges for the Removal and replacement of concrete slabs

RCC Hume pipe 12”dia, length 12m

Charges for the Clamping 3”dia, Pipe with High Level Reservoir Structure

Supply of 8" dia, M.S pipe lenght 7.5 m

Charges for the Fabrication and Laying of complete receiving and delivery pipelines of size 4” and 3” dia as per drawing.

Charges for the Painting – one coat red oxide primer and two coats sky blue enamel paint in pipes

Charges for the Construction of concrete Ramps at 4 locations as per drawing.

Cost for the supply of Horizontal Auxillary Split case pump , Power-40HP, Casing -Cast Iron, Impeller-Bronze, Flow rate-150 M3/Hour, RPM-1475, Total Head- 45 m, Suction/Delivery Size: 150mm/100mm with suitable motor (energy efficient), MCB-100A, Automatic star delta starter with safety control system, DB 100A, 4 Pole, Earthing system, ELCB and other suitable electrical accessories and cables. MAKE: KIRLOSKAR/ CROMPTON/ CRI / JYOTI

Cost for the Supply of G.I.Pipe – 6” dia.-‘C’ Class as per IS 1239 (Part-I)

Charges for installation, testing and commissioning of pump and motor as per item sl.no.30

C.I. Non return Valve (Ball Type) Flanged end– 4” dia

C.I. Foot Valve (Ball Type) Flanged end– 6” dia

Supply , Fabrication, Fixing of Pedestal grouting with anchor bolts on wharf with suitable clamps to be provided on the pipeline as per CHPA Drawing. Material – M.S. Angle 75 x 75 x 8 mm

Supply , Fabrication, Fixing of Pedestal grouting on ground with concrete fillings with suitable clamps to be provided on the pipeline as per CHPA Drawing. Material – M.S. Angle 75 x 75 x 8 mm

Charges for the Painting – one coat red oxide primer and two coats sky blue enamel paint in Pedestals

Charges for the Testing and commissioning of the complete fresh water supply through the pipes laid from I Section to delivery point.

Creators Engineers and Interiors Pvt Ltd

V.SUBBIAH

Sri Atchaya Engineering Private Limited