Provision of pyroxyline Sub station electrification work including street lights inside factory at O. F. Bhandara.

Amount

Supply and fixing of GI pipe medium grade 50 mm dia. Under the road/hard standing/street light bracket.

Supply , laying , fixing & connection (by using brass cable gland and copper lugs) of following size XLPE insulated PVC sheathed armoured with galvanized strip steel U.G. cable with Aluminium conductor electric cables 4core X 35 Sq. mm with aluminium conductor,1100 Volt grade,.as per IS:1554(part-1) & IS:7098(part-1) etc as required GLOSTER/POLYCAB/HAVELLS/UNIFLEX MAKE.

Rough excavation in trenches in hard dense soil not exceeding 1.5 m deep and getting out for laying of cable.

Back filling of excavated soil spreading, leveling & well roaming in layers after laying of cable in the trench.

M & L fine sand filling in the trench for coushoning of cable.

Supply and laying reinforced precast cement cable cover.Class LV, Type I, flat, size 250mm x 150mm x 40mm

Supply and fixing of exhaust fan, steel body AC single Phase. 230V of size 450mm(18'')sweep with, blades, and frame and louvers.Usha,Bajaj,Crompton make.

Supply and fixing of exhaust fan, steel bodyAC single Phase. 230V of size 300mm (12") sweep with, blades, and frame and louvers Usha,Bajaj,Crompton make.

Supplying , installation, testing & commissioning of LED Street Light luminaire made of die cast aluminium with street optic lenses for uniform light distribution, IP:66 protection having system lumens output not less than 6500 lumens and power consumption shall not exceed 60 watt, CCT not less than 5700, CRI not less than 70 i/c built in electronic driver and surge protector connection etc as reqired. (Make: Crompton LST-60-CDL-M or equivalent in Philips/CG/Wipro/Bajaj)

Supply and fixing 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.HPL/Havells/L&T/C&S make

Supply and fixing TPN 100 AMP, 415V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning.HPL/Havells/L&T/C&S make

S&F of PVC rectangular block for mounting ceiling roses, holders etc of size 100 mm X100 mm and 50 mm deep. Anchor /CONA/Havells/ Legrand make

M & L for celing rose,3 phase/PVC/Polycarbonate ,isolated body.Anchor /CONA/Havells/ Legrand make

M& L for PVC /Poly carbonate type Angle / pendent type Lamp holder . Anchor /CONA/Havells/ Legrand Make

Material and Labour for One light point controlled by one switch with 2.5 sq.mm. copper conductor FR PVC insulated multistranded conductor cable of Polycab/Finolex/Havells/V-Guard/HPL make in PVC conduit with saddle spacer along with 2.5 sq.mm copper conductor FR PVC insualted for running earth wire of same make .

Writing for circuit/submain wiring alongwith earth wire with the 2x2.5 sqmm + 1x1.5sqmm earth wire sizes of Polycab/Finolex/Havells/V-Guard/HPL make FR PVC insulated copper conductor, single core cable in surface/recessed in PVC conduit as required.

Writing for circuit/submain wiring alongwith earth wire with the 2x4.0sqmm + 1x1.5sqmm earth wire sizes of Polycab/Finolex/Havells/V-Guard/HPL makeFR PVC insulated copper conductor, single core cable in surface/recessed in PVC conduit as required.

S&F of switch piano flush single pole two way 5 amp Anchor /Cona/Havells make.

M&L for Switch socket combination 2 in 1 ,3 Pin, 5 and 15 Amp flush type universal, Anchor /CONA/Havells/ Legrand make.

S&F sheet metal enclosure DB for MCBs 16 way,415V,Tripple pole and neutral, double door.HPL/Havells /L&T make.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire

Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc.

S & F for rolled mild steel in plates (plain or chequered),channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment over cable trench , of quality GDE Fe 410-W (Gde-E-250)quality-B complete all as specified , with riveted or bolted or welded attachment and as directed by the Engineer-in-Charge

Supply & erection of flange mounted hot dip Galvanized Octagonal Poles of 6.0 Mtr. height made from 3mm thick HT sheet, having bottom dia of 130mm & top dia of 70mm complete with window with flash cover at a height of 0.5 Mtr. from the base for cable termination block etc. and galvanized base plate of size 200mm x 200mm x12mm thick on existing cement concrete pedestal as required as per specifications i/c supplying and fixing of the following in the window box provided for cable termination. a) Supplying and fixing 6mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. G.I. strips 4mm thick of suitable length & width, having suitable size tapped holes as required. b) Supplying and fixing of 63 Amp terminal blocks suitable for 25 Sq.mm conductor complete with DIN channel of suitable length on the existing laminated sheet as required. c) 6 Amp. SPMCB 'C' series 10 KA - 1 No. d) Cable support clamp suitable for 2 Nos. of 4 x 16 sqmm cable. e) Supplying & fixing of galvanized arm bracket 1000 mm long double arm sword type bracket made of 40NB dia GI pipe suitable for mounting on pole having tops 70mm A/F with wall and dom for erection of LED t ype fitting as per approved by Engineer-In-Charge. f) Supplying and fixing 4 Nos. of M20 X 600 mm long 'J' type foundation bolt (EN8 grade) with nuts, washer including 2 Nos. template of 3mm thick size of 200mm x 200mm with 4 nos. 24mm dia holes suitable to match with PCD of Pole base plate as reqd. g) Supplying and laying of 3 core 2.5 sq. mm FRLS copper conductor cable for making connections from MCB to fitting as required. Make Bajaj/Crompton or equivalent to these make.

Providing and laying in position 1:2:4 RCC foundation (i/c steel reinforcement as per pole manufacturing company) of size 400 mm x400 mm x 1500 mm (D) i/c excavation of earth as foundation for pole recommended as per pole manufacture standard.

Supply of XLPE insulated, PVC sheathed armoured wit galvinised strip steel heavy duty electric cable with Copper conductor 4 Core X 4 sq. mm cross-sectional area , 1100 volts grade as per IS:1554(part-1) & IS:7098(Part-1) etc. as required Gloster/polycab/Havelles/Uniflex/Finolex/CCI make

Labour only for Laying and termination of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing trench/HDPE/RCC/ HUME/ METAL pipe as required. a) Upto 35 sq. mm

M & L Cast iron pressed steel terminal boxes 60mm deep size 150x150mm rectangular for mounting, switches, sockets, fan regulator etc with 3mm thick pastic laminared sheet cover not exceeding the size 175x100mm.

M & L Cast iron pressed steel terminal boxes 60mm deep size 250x300mm rectangular for mounting, switches, sockets, fan regulator etc with 3mm thick pastic laminared sheet cover.

M & L Cast iron pressed steel terminal boxes 60mm deep size 200x150mm rectangular for mounting, switches, sockets, fan regulator etc with 3mm thick pastic laminared sheet cover.

Supply and fixing of double tube light fittings 2 x 20 watt, 230 vot AC. Bajaj, Surya, Cromton, Philips make.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply & Fixing of LT cable route marker made out of 12.5 cm dia.CI plate duly rivated on top of 40x40x6 mm angle from (duly) Painted with Blacksynthetic/enamelled paint) 0.75 Mtr. long and PCC cube 15x15x15 cm at bottom.

S&F sheet metal enclosure DB for street light duty mounted on base frame , height 3 feet, bottom cable entry 1) Incomer 100 Amp, MCCB 4 Pole - 01 no. 2) outgoing MCBs DP 16 amps - 16 nos., with Contactor and timer for Auto and Manual operation. HPL/Havells /L&T make contactor & Astro mini Timer.

M B ELECTRICALS

RAJESH ELECTRICAL CONSTRUCTION