REPAIR TO FLOOR WALL SANITARY FITTINGS JOINERIES CLEANING OF OVERHEAD TANKS INTERNAL WATER SUPPLY AND CERTAIN MISC WORKS TO MD AND OTM ACCNS BLDGS IN DAD COMPLEX THEVARA AND COMPREHENSIVE MAINT AND PETTY REPAIR OF INTERNAL WIRING ELECTRICAL FITTINGS

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic colored designed straight edge tiles 7mm thick area of tiles exc 0.06 Sqm and n exc 0.18 Sqm on vertical surfaces such as skirting or dado laid over cement mortar backing coat set and jointed with neat cement slurry and pointed in white or coloured cement to match including rendering in CM 1:4, 10mm thick for fixing tiles on skirting/dado complete all as specified and directed.

M&L for non skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm on floors laid over cement mortar screeding set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic colored tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.38 Sqm on flooring including 15mm thick cement screed bed in CM 1:6 and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L for vitrified ceramic tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm, in floors and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of mortar in CM 1:4 all as specified and directed.

M&L for vitrified ceramic tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm, in vertical surfaces as skirting including 10mm thick cement plaster 1:4 and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) 25 mm thick as in levelling course to floors complete all as specified and directed.

Demolition of brick work/ stone /boulders built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for precast cement concrete block masonry 1:3:6 with solid blocks exc 10 cm in width and setting in CM1:6 complete all as specified and directed.

S&F in repair plastic seat cover, any color closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinges, etc including fixing bolts complete complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, any color, with inlet ball valve, float and handle including brackets and all connections, ISI marked complete all as specified and directed.

S&F in repair PVC connection 15mm bore 45cm long with brass coupling complete all as specified and directed.

S&F in repair white glazed vitreous china WHB flat back size 550x400 mm including CI bracket etc incl PVC waste pipe 40mm bore 90cm long with coupling spring type complete all as specified and directed.

S&F in repair 100 mm dia stainless steel grating complete all as specified and directed.

S&F in repair Brass Chromium plated waste coupling 32 mm dia suitable to WHB complete all as specified and directed.

S&F in repair 32 mm dia size PVC waste pipe with cup head for Wash Hand Basin sink complete all as specified and directed.

M&L for PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement as in repair complete all as specified and directed.

S&F in repair stainless steel sink with draining board made out of 1.0mm thick shet for kitchen with plug , washers waste pipe , cast iron cantilever brackets connecting union over all size 915X460mm with bowl size 410X330X160mm complete all as specified and directed.

S&F in repair pillar tap 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down complete all as specified and directed.

S&F in repair stainless steel tubular towal rail 20mm dia , 600mm long complete all as specified and directed. Make: JAQUAR Cat No ACNIIIISM or equivalent in approved list of manufactures.

S&F in repair CP health faucet including flexible pipe and fittings complete all as specified and directed. Make: JAQUAR Cat No ALD 587 or equivalent in approved list of manufactures.

S&F PVC(SWR) pipe single socketed in any length with rubber ring joints fixed to wall 110mm bore including taking down old existing pipe complete all as specified and directed.

S&F PVC(SWR) pipe single socketed in any length with rubber ring joints fixed to wall 75mm bore including taking down old existing pipe complete all as specified and directed.

S&F PVC(SWR) bends any radius to fit to 110mm bore pipe with access door complete all as specified and directed.

S&F PVC(SWR) bends any radius to fit 75mm bore pipe with access door complete all as specified and directed.

Taking down chowkat n.exc 1.5 Sqm but with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkat exc 1.5 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Repairs to shutters without taking down of any description exceeding 1.0 Sqm and not exceeding 2 Sqm including resecuring or easing and adjusting in same opening complete all as specified and directed.

S&F in repair 4mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and width of aperture 1.40mm complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick with particle board(stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

M&L for repair to aluminium doors of size n.exc 2 Sqm and making good and functional including changing of pivot, repairs to lock, handle, rubber beadings etc complete all as directed.

Repair to aluminium window of any size, pattern and any number of shutter & making good and functional including changing of pivot, repairs to lock, handle, rubber beadings etc complete all as directed

S&F mild steel tower bolt 100mm long complete all as specified and directed.

S&F 200mm long aluminium anodised sliding bolt complete all as specified and directed.

S&F 100mm long aluminium anodised sliding bolt complete all as specified and directed.

S&F 100mm stainless steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F in repair flush tank syphon set complete internal for flush tank 10 Ltrs capacity push button for single layer for PVC flush complete all as specified and directed.

Removal of vegetation /shurbs on unaccessible roofs or profections etc and spraying of acid of required qty complete from any location of building and making good disturbed surfaces with cement mortar 1:4 or cement concrete type C1 1:3:6, using 20mm graded aggregate including necessary scafolding complete all as specified and directed.

Repairs to shutters without taking down of any description not exceeding 1.0 Sqm including resecuring or easing and adjusting in same opening complete all as specified and directed.

M&L for 18 to 20 mm thick machine cut polished granite 1st quality "black" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including grinding and moulding of exposed edges of granite complete all as specified and as directed. (Sample of granite should be passed by GE before execution of work)

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing size 60cm long with brass bracket complete all as specified and directed.

S&F in repair corner glass shelf of 5mm thick plain sheet glass and with brass, chromium plated bracket complete all as specified and directed.

Dismantling of Wall or ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc , keep in safe custody for reuse complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 m thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern roof covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F roof truss (framed) confirming to Fe 410W, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

Cleaning vegetation growth over MP Tiles roof RCC roof, chajja etc up to two storey complete all as specified and directed.

M&L in repair 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nail to timber frame work complete all as specified and directed.

S&F aluminium powder coated sliding type window with 4mm thick plain sheet glass including provision of airtight heading and handling arrangements complete with using following section :- (i) Outer frame 50.80x25.40x1.5mm (ii) 3 Track frame 43.66x22x1.22mm (iii) Shutter frame 31.80x14.50x1.20mm (iv) Shutter interlock 31.80x20.50x1.20mm

S&F in repair aluminium powder coated frame work for partition(area of panel not exceeding 1.50 sqm each) with out sash bar,including all necessary jointing leats,hold fasts,hinges with fixing clips, rubber gasket, anodised snap beading, anodised aluminium fittings, locking arrangement etc (minimum thickness of powder coating 50 micron). Section used for partition is catlogue No 9223 of size 63.58x38.10x2.00 mm (single partition vertical &horizontal sections) of Hindalco or equivalent make as approved by GE complete all as specified and directed.

S&F in repair aluminium anodised powder coated door with out sash bar, including all necessary jointing cleats, hold fasts, hinges with fixing clips, rubber gasket, anodised snap beading, anodised aluminium fittings,locking arrangement etc (minimum thickness of powder coating 50 micron). Section used for door are catlogue No 9258 of size 50x44.50x1.80 mm door vertical stiles, catlogue No 9286 of size 50x45x1.50 mm door Top and middle /lock rail,catlogue No 9246 of size 100 x44.50x1.85 mm door bottom rail, of Hindalco or equivalent make as approved by GE complete all as specified and directed.

S&F in repair 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for 5 mm thick sheet glass, ordinary quality fixed with glazing clips/aluminium cleats in square n.exc 0.50 sqm in each pane all as specified complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Pillar Tap with aerator Parryware Cart Part No.Crust T3102A1 or equivalent make of Hindware/Cera

M&L for 2 mm thick High Performance Modified Self-Adhesive Membrane SBS (Styrene Butadiene Styrene) based waterproofing membrane with high density polyester film on one side and easy-to-peel silicon film on the other side on roof including cleaning and preparation of surface including dismantling complete all as specified. Make : STP Ltd or equivalet as approved by GE.

M&L for water proofing treatment by applying oil bound bituminous primer 0.20 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 kg/sqm, reinforced with non-woven polyster matt not less than 160 g/sqm, having softening point not less than 1400 C longitidunal tensile strength not less than 650 N/Sqcm tearing strength of 180 N by torque application including minimum 10 cm side overlap and 15 cm end lap and applying a coat of blown grade hot bitumen 85/25 conforming to IS : 702 heated to a working temp of 180 degree and applied @1.2kg/Sqm finishing the surface with solar reflective bitmininous aluminium paint @ 100 g/sqm, complete all as specified and as directed by Engr-in-Charge and as per manufacturer's instructions.

M&L in repair for 5mm thick Solid PVC Wall Lining consisting of 5mm thick prelam colour PVC sheet inclusive of solvent cement and fixing including cover fillet at site on PVC frame as per specifications and drawing.

S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 40mm thick PCC type B-0 1:2:4 (using 12.5mm graded stone aggregate ) as in repair top surface of pavement and flooring etc. and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete type C2 1:3:6 (40mm graded stone aggregate) as in plinth protection complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, with grey cement and pigment complete including dismantiling old one complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen sink with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and directed.

S&F in repair bib taps, cast copper alloy with cruntch or butter fly handle copper alloy fancy type chromium plated screwed down for 15 mm bore complete all as specified and directed.

S&F in repair stop valves, cast copper alloy chromiun plated fancy type screwed down for 15 mm bore pipe complete all as specified and directed.

S&F in repair kitchen utensil stand stainless steel of size 75 x 75 cm complete all as specified and directed.

Supply and laying 16mm outer dia SDR 11 CPVC pipe and fitings on wall/ceilings or laying floor including taking down old steel tubing complete all as specified and directed.

Supply and laying 20mm outer dia SDR 11 CPVC pipe and fitings on wall/ceilings or laying floor including taking down old steel tubing complete all as specified and directed.

S&F in repair bib tap/ stop cock /angle valve any bore dia any type of including repairing and replacing spindle/washer etc and refixing complete all as specified and directed.

S&F in repair pillar tap any bore dia any type of including repairing and replacing spindle/washer etc and refixing complete all as specified and directed.

S&F in repair PVC bathroom cabinet (white) of size 420 x 300 x 100mm (approx), with one single shutter and built in mirror in front of shutter complete all as psecified and directed.

Material and Labour for scrubbing, cleaning etc thoroughly, HDPE service tank of 750 ltr Capacity situated in different locations at satalite area, including removal of sludge, bleaching sediments, mud or any other deposits to a distance not exc 50 mtrs, including writing the words " MILITARY ENGINEER SERVICES, TANK CAPACITY AND DATE OF CLEANING" in capital letter of suitable height matching with the existing marking at outer wall with synthetic enamel black/white paint , all as specified and directed by Engineer-in Charge.

All as per Item No 81 here-in-before but 500 Ltr capacity complete all as specified and directed by Engr-in-Charge.

Taking down copper/aluminium point wiring (ligh, fan, bell, socket or power etc.) complete with all accessories like switches, sockets, regulators, ceiling roses, light fittings etc. for taking credit and making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls / floors / ceiling etc complete all as specified and directed.

M&L for surface point wiring with 1.5 Sq mm PVC insulated unsheathed multistranded single core copper conductor FRLS, ISI marked cable in and including ISI Marked, medium grade, non metallic, Fire Resistant PVC Casing & Capping and all accessories, medium grade PVC surface Box with top cover plate, 1.5Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLS, ISI marked cable as earth continuity conductor and making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls / floor / ceiling etc for one light point controlled by one switch complete all as specified and directed.

All as per item No.84 here-in-before but for one ceiling / exhaust fan point controlled by one switch complete all as specified and directed.

All as per item No.84 here-in-before but for one 3 pin socket outlet, 5 Amps controlled by one switch on same board with other switches complete all as specified and directed.

All as per item No.84 here-in-before but for one 3 pin socket outlet, 5Amps controlled by one switch on independent board complete all as specified and directed.

All as per item No.84 here-in-before but for one bell point controlled by one bell push on same board or independent complete all as specified and directed.

All as per item No.84 here-in-before but for one 3 pin socket outlet, 15Amps controlled by one switch on independent board with 2.5 sqmm cable and 2.5Sqmm cable as earth wire complete all as specified and directed.

S&F switch piano flush type single pole one way 5 Amp one way complete all as specified and directed.

S&F bell push flush type 6A, 1module, complete all as specified and directed.

S&F socket outlet 5 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F Power Unit suitable for AC / Geyser, 20A, 3pin, AC, 240V ISI Marked incl PVC surface box complete all as specified and directed.

S&F fan regulator electronic step type 100 W, 250 Volts complete all as specified and directed.

S&F in repair switch piano flush type single pole one way 5 Amp one way complete all as specified and directed.

S&F in repair switch piano flush type single pole one way 15 Amp complete all as specified and directed.

S&F in repair bell push flush type 6A, 1module, complete all as specified and directed.

S&F in repair socket outlet 5 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F in repair socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F in repair Power Unit suitable for AC / Geyser, 20A, 3pin, AC, 240V ISI Marked incl PVC Surface Box complete all as specified and directed.

S&F in repair fan regulator electronic step type 100 W, 250 Volts complete all as specified and directed.

S&F in repair ceiling rose surface Bakelite 65 x 50 mm, 3 terminals complete all as specified and directed.

S&F in repair electric bell, AC 230 Volt single pole complete all as specified and directed.

S&F in repair lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F in repair switch socket combination 5 Amps, 5 pin 2 in 1, complete all as specified and directed.

S&F in repair switch socket combination multipurpose 5 &15 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F in repair switch modular 6 Amps 240 Volts one way switch complete all as specified and directed.

S&F in repair switch modular type AC 240 volts 16 Amps one way complete all as specified and directed.

S&F in repair Modular Bell push 6A, 1module, complete all as specified and directed.

S&F in repair in repair Fan Regulator, modular electronic rotary, 0-4 steps step type 100Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed.

S&F in repair socket 6 Amps AC 240 Volts 2/3 pin combined 2 modular type complete all as specified and directed.

S&F in repairs socket 6A/ 16 Amps 2/3 pin combined AC 240 Volt modular type complete all as specified and directed.

M&L for sub main wiring with 2 runs of 4 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLS, ISI marked cable drawn in and including ISI Marked, medium grade, non metallic, Fire Resistant PVC Casing & Capping and all accessories, with 1 run of 4.0 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLS, ISI marked cable as earth continuity wire and making good disturbed surfaces, applying distemper / emulsions matching to the existing colour / quality of walls/floors/ceiling etc all as specified including taking down old sub main wiring complete all as specified and directed. Note:- Three run of cable and one run of PVC casing and caping shall be measured as one unit

M&L for sub main wiring with 2 runs of 6 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLS, ISI marked cable drawn in and including ISI Marked, medium grade, non metallic, Fire Resistant PVC Casing & Capping and all accessories, with 1 run of 6.0Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLS, ISI marked cable as earth continuity wire and making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls/floors/ceiling etc all as specified including taking down old sub main wiring complete all as specified and directed. Note:- Three run of cable and one run of PVC casing and caping shall be measured as one unit

M&L for sub main wiring with 4 runs of 6 Sqmm PVC insulated copper conductor multistranded cable drawn in and including PVC conduit including two run of 6 Sqmm multi stranded copper conductor cable for earth condinuity wire including taking down old sub main wiring complete all as specified and directed. Note : Four runs of PVC cable 6 sqmm and two run of 6 sqmm earth condinuity conductor cable and pvc conduit shall be measured as one unit length.

S&F XLPE insulated heavy duty electric cables with aluminium conductor, of size 10 sqmm 4 core, 1100 volts grade, including taking down old unserviceable cable complete all as specified and directed.

S&F XLPE insulated heavy duty electric cables with aluminium conductor, of size 16 sqmm 4 core, 1100 volts grade, including taking down old unserviceable cable complete all as specified and directed.

S&F XLPE insulated heavy duty electric cables with aluminium conductor, of size 25 sqmm 4 core, 1100 volts grade, including taking down old unserviceable cable complete all as specified and directed.

S&F XLPE insulated heavy duty electric cables with aluminium conductor, of size 10 sqmm 2 core, 1100 volts grade, including taking down old unserviceable cable complete all as specified and directed.

S&F XLPE insulated heavy duty electric cables with aluminium conductor, of size 16 sqmm 2 core, 1100 volts grade, including taking down old unserviceable cable complete all as specified and directed.

S&F XLPE insulated heavy duty electric cables with aluminium conductor, of size 50 sqmm 3.5 core, 1100 volts grade, including taking down old unserviceable cable complete all as specified and directed.

Taking down existing sub main LT cable of any type and refixing the same with clamps, saddles, screws etc complete all as specified and directed.

S&F in repair RCCB / ELCB, double pole, AC, 40A, 30mA, 240V ISI Marked complete all as specified and directed.

S/F in repair RCCB / ELCB, 4P, AC, 63A, 30mA, 415V ISI Marked complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB, TPN, 4 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB DB, SPN, 12 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB DB, SPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB DB, SPN, 4 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB DB, SPN, 2 ways, double door, with 200 Amps rated bus bar, having IP-43 protection complete all as specified and directed.

S&F in repair Isolator 4P, 63A, AC, 415V, 10KA ISI Marked complete all as specified and directed.

S&F in repair Isolator DP, 40A, AC, 240V, 10KA, ISI Marked complete all as specified and directed.

S&F in repair MCB TPN, 100 Amps, 415 Volt, B curve, having breaking capacity 10 kA complete all as specified and directed.

S&F in repair MCB TPN, 63 Amps, 415 Volt, B curve, having breaking capacity 10 kA complete all as specified and directed.

S&F in repair MCB TPN, 40 Amps, 415 Volt, B curve, having breaking capacity 10 kA complete all as specified and directed.

S&F in repair MCB TP, 100 Amps, 415 Volt, B curve, having breaking capacity 10 kA complete all as specified and directed.

S&F in repair MCB TP, 63 Amps, 415 Volt, B curve, having breaking capacity 10 kA complete all as specified and directed.

S&F in repair MCB SPN, 63 Amps, 415 Volt, B curve, having breaking capacity 10 kA complete all as specified and directed.

S&F in repair MCB SP 6 to 32 Amps, 415 Volt, complete all as specified and directed.

S&F in repair Regal Batten type LED Tube frame 1x22W for LED tube lights, singe side connection type complete all as specified and directed.

S&F in repair Regal batten type LED Tube frame 1x22W for LED tube lights, both side connection type complete all as specified and directed.

S&F in repair LED light fitting 20 W, high performance batten, 220 volt , 50 Hz,6000 k surface mounted high quality extruded polycarbonate, environmental friendly, energy efficient, with all connecting accessories, with suitable connection complete all as specified and directed.

S&F in repair LED tube rod 1 x 20 Watt, both side connection complete all as specified and directed.

S&F in repair LED tube rod 1 x 20 Watt, single side connection complete all as specified and directed.

S&F in repair for LED Mirror light fitting 8 watt with connected accessories complete all as specified and directed.

S&F in repair decorative wall light fixture made up of Polycarbonate, suitable for 10 W retrofit LED Lamp B22 base complete all as specified and directed.

S&F in repair 1x15 Watt LED down lighter square / round in shape surface mounted type and connecting to the existing electrical system complete all as specified and directed.

S&F in repair existing holder, 15 Watt LED Bulb with B22 base, clear acrylic diffuser, self declaring R No, power factor .90, 100 lumens light output complete all as specified and directed.

S&F in repair existing holder, 18 Watt LED Bulb with B22 base, clear acrylic diffuser, Self declaring R No, power factor .90, 100 lumens light output complete all as specified and directed.

S&F in repair existing holder, 20 Watt LED Bulb with B22 base, clear acrylic diffuser, Self declaring R No, power factor .90, 85 lumens light output complete all as specified and directed.

S&F in repair 45 Watt LED building security light Industrial with PDC housing having IP 65 protection complete all as specified and directed.

S&F in repair 90 Watt LED building security light Industrial with PDC housing having IP 65 protection complete all as specified and directed.

S&F in repair 100 Watt LED building security light Industrial with PDC housing having IP 65 protection complete all as specified and directed.

S&F in repair 50 Watt LED Flood Light having IP-66 protection, pressure die cast aluminium housing, high luminious efficacy and high power complete all as specified and directed.

S&F in repair 100 Watt LED Flood Light having IP-66 protection, pressure die cast aluminium housing, high luminious efficacy and high power complete all as specified and directed.

S&F in repair 150 Watt LED Flood Light having IP-66 protection, pressure die cast aluminium housing, high luminious efficacy and high power complete all as specified and directed.

S&F in repair LED gate light (post lantern) 40 Watt with driver and complete fixing on the place complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old one complete all as specified and directed. Note: The old taken down ceiling fan shall be deposited to AGE(E/M) store yard.

S&F PVC body wall fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting including taking down old one complete all as specified and directed. Note: The old taken down ceiling fan shall be deposited to AGE(E/M) store yard.

S&F 250mm sweep PVC body exhaust fan heavy duty with louvers, single phase 230 Volts, including taking down old one complete all as specified and directed. Note: The old taken down ceiling fan shall be deposited to AGE(E/M) store yard.

S&F 300mm sweep, PVC body exhaust fan heavy duty with louvers, single phase 230 Volts, including taking down old one complete all as specified and directed. Note: The old taken down ceiling fan shall be deposited to AGE(E/M) store yard.

S&F 300mm sweep, steel body exhaust fan heavy duty with louvers, single phase 230 Volts, including taking down old one complete all as specified and directed. Note: The old taken down ceiling fan shall be deposited to AGE(E/M) store yard.

S&F 450mm sweep, exhaust fan heavy duty, single phase 230 Volts, including taking down old one complete all as specified and directed. Note: The old taken down ceiling fan shall be deposited to AGE(E/M) store yard.

M&L for rewinding the ceiling fan 1200mm sweep of any make, any model, from a reputed workshop, removing the burnt winding, cleaning slots, re-winding the motor with super enameled copper wire of size equivalent to the original winding including ball bearing, bush bearing, insulated packing materials, varnishing, drying etc, replacement of body screws, testing and commissioning on full load for 8 hrs continuous running complete all as specified and directed.

All as per item No.164 here-in-before but for ceiling fan 1400mm sweep complete all as specified and directed.

All as per item No.164 here-in-before but for wall fan 400mm sweep complete all as specified and directed.

All as per item No.164 here-in-before but for exhaust fan upto 300mm sweep complete all as specified and directed.

All as per item No.164 here-in-before but for exhaust fan 450mm sweep complete all as specified and directed.

S&F in repair PVC body exhaust fan motor suitable for 250/300 mm of any make as per site requirement complete all as specified and directed.

S&F in repair exhaust fan motor suitable for metallic body exhaust fan of any make and type of 250/300/450 mm sweep complete all as specified and directed.

S&F in repair motor for 400 mm, PVC body wall fans any make as per site requirement complete all as specified and directed.

M&L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and directed.

All as per item No.172 here-in-before but for metallic body exhaust fan 250 to 450 mm sweep complete all as specified and directed.

All as per item No.172 here-in-before but for wall mounted fan 250 to 450 mm sweep complete all as specified and directed.

S&F in repair, condensor / capacitor, 2.5 mfd, 240V, AC, suitable for fans complete all as specified and directed.

S&F in repair, condensor / capacitor, 4.0 mfd, 240V, AC, suitable for fans complete all as specified and directed.

S&F in repair nickel plated mild steel clamps, nuts, bolts, washers and split pin suitable for ceiling fans any type, any make, any size complete all as specified and directed.

S&F in repair Down rod, suitably threaded and holed, made out of 15mmdia GI tubes, duly painted, suitable for ceiling fans any type, any make, any size, any length as per site requirement complete all as specified and directed.

S&F in repair Fan canopy with tightening screw/check nut, made out of PVC, suitable for ceiling fans any type, any make, any size complete all as specified and directed.

S&F in repair rubber reel insulator, suitable for ceiling fans any type, any make, any size complete all as specified and directed.

S&F in repair fan blades made out of 1.2mm thick aluminium alloy and MS screws duly balanced & spray painted with white or brown colour, set of three, suitable for ceiling fans of size 1200mm sweep any type, any make complete all as specified and directed.

S&F in repair fan blades made out of 1.2mm thick aluminium alloy and MS screws duly balanced & spray painted with white or brown colour, set of three, suitable for ceiling fans of size 1400mm sweep any type, any make complete all as specified and directed.

S&F in repair fan blades made out of Acrylic / PVC alloy and MS screws duly balance suitable for 450mm wall fans of any type, any make, complete all as specified and as directed.

S&F in repair fan blades made out of 1.2mm thick Aluminium alloy and MS screws duly balanced & spray painted with approved colour, suitable for Exhaust fans of size 300mm sweep any type, any make complete all as specified and directed.

S&F in repair fan blades made out of 1.2mm thick Aluminium alloy and MS screws duly balanced & spray painted with approved colour, suitable for Exhaust fans of size 450mm sweep any type, any make complete all as specified and directed.

S&F in repair split pin made out of Nickel plated mild steel with specified temper, suitable for ceiling fans of any type, any make with bolts of any size complete all as specified and directed.

S&F in repair Bakelite body Nichrome connectors, 2 way with fixing screws of suitable size for ceiling fans of any type, any make complete all as specified and directed.

S&F in replair Hylem sheet of 3 mm thick as per site requirement including cutting for accommodating existing swiches, sockets, regulators etc. complete all as specified and directed.

S&F in replair white cover plate with frame for modular switches of one module complete all as specified and directed.

S&F in repair white cover plate with frame for modular switches of two module complete all as specified and directed.

S&F in repair white cover plate with frame for modular switches of three module complete all as specified and directed.

S&F in repair white cover plate with frame for modular switches of four module complete all as specified and directed.

S&F in repair white cover plate with frame for modular switches of six module complete all as specified and directed.

S&F Geysers 25 Ltrs capacity with all accessories including taking down old one and depositing to AGE(E/M) store yard complete all as specified and directed.

S&F in repair Heating element, suitable for any type, any make geyser, 240V, AC, ISI Marked, with heat resistant rubber washer, for1.5 KW capacity, connecting complete all as specified and directed.

S7F in repair Thermostat control unit suitable for any type, any make 25 Ltrs capacity geyser, 30-90 degree rating, 240V, AC, ISI Marked, connecting complete all as specified and directed.

S&F in repair indicating lamp unit round / rectangular type, suitable for any type, any make geyser, standard quality, AC, 240V, Red or Green, connecting complete all as specified and directed.

S&F in repair fusible plug made out of brass with internal or external threading suitable for any type, any make geyser of capacity 25 Ltrs complete all as specified and directed.

S&F in repair inner assembly made out of brass wih chromium plating, with heat resistant rubber washer, suitable for any type, any make Geyser of 25 Ltrs capacity, ISI marked, complete all as specified and directed.

S&F in repair inner tank made out of cast copper alloy, ISI Marked, suitable for any type, any make geyser of 25 Ltrs capacity, complete all as specified and directed.

S&F in repair metallic outer cover including bottom and top cover duly painted suitable for any type, any make geyser of 25 Ltrs capacity complete all as specified and directed.

M&L for repair to any type, any make geyser of 25 Ltrs capacity metallic inner tank, arresting the leakage by welding, brazing etc, pressure testing after repairs, complete all as specified and directed.

M&L for filling the glass wool between outer cover and inner tank of any type, any make geyser, 25 litres capacity, complete all as specified and directed.

M&L for preparing the surface of any type, any make geyser of 25 Ltr capacity, remove the existing painting by scraping, cleaning, filling the cavities and applying 2 coats of spray paint with synthetic enamel white paint over a coat of red oxide primer, including taking down if required and writing the MES Nos. complete all as specified and as directed.

M&L for fabricate and fix, GI bottom cover / inspection plate, suitable for any type, any make geyser, 2 mm thick, split type, duly painted with 2 coats synthetic enamel paint over a priming coat of metallic primer to match with the existing colour complete all as specified and directed.

M&L for replacement of bottom main terminal, synthetic gasket, fixing clamps suitable for any type, any make geyser, cleaning inner container/tank and assembly complete all as specified and directed.

S&F in repair pressure / air release valve suitable for any type, any make geyser, made out of brass 15mm bore, ISI marked, complete all as specified and directed.

S&F in repair non-return valve, made out of brass 15mm bore, ISI marked, complete all as specified and directed.

S&F in repair stainless steel geyser connection pipe16 mm dia (outer), 450mm long suitable for Hot / Cold water application complete with threaded brass union, teflone washers on both sides to suit 15 mm dia fittings complete all as specified and directed.

Material, labour, transport and tools for rectification of urgent nature electrical complaints at satellite area as and when required (Trangini apartment,Fernson apartment,DERA enclave, Varsha, Varuna complex and Dawson Vihar) during off hours on all working days complete all as specified and as directed by Engr-in-Charge. NOTE:- (i) The material incorperated for completion of work will be measured and paid seperately under relevent item. (ii) The contractor shall display contact number at satellite area (Trangini apartment,Fernson apartment,DERA enclave ,Varsha ,Varuna complex and Dawson Vihar) to register users complaint. (iii) The recovery of rupees 400/- per complaint will be charged if contractor fails to attend the complaint within 2 hours.

Material, labour, transport and tools for rectification of urgent nature electrical complaints at satellite area (Trangini apartment, Fernson apartment, DERA enclave, Varsha,Varuna complex and Dawson Vihar) during Sundays and Holidays complete all as specified and as directed by Engr-in-Charge. NOTE:- (i) The material incorperated for completion of work will be measured and paid seperately under relevent item. (ii) The contractor shall display contact number at satellite area (Trangini apartment,Fernson apartment,DERA enclave ,Varsha ,Varuna complex and Dawson Vihar) to register users complaint. (iii) The recovery of rupees 400/- per complaint will be chargeable if contractor fails to attend the complaint within 2 hours.

S&F in repair cadmium plated screws of various types and sizes for existing switch boards with washer as per sample complete all as specified and directed.

M&L for servicing of the 'DOCTOR' make water cooler by authorised company representative including replacement of Primary, Secondary and Carbon Filters as and when required & made serviceable condition for 12 months complete all as specified and directed.

M&L for checking of ceiling fan stability / tightness with fan hook once in 6 months quarter wise in complete Satellite Area and re-tightening of split pin / nut, bolt etc. complete all as specified and as directed. Note : The necessary registers duly signed by the users shall be kept ready for any inspection.

S&F in repair SPN enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, complete all as specified and directed.

S&F plug top 15 Amps, 3 pin complete all as specified and directed.

S&F metallic plug top 3 pin suitable for metal clad sockets of 15 Amps complete all as specified and directed.

S&F AC Single Phase Static Energy meter of Accuracy Class 1.0, rating 5-30A, 240V, 50Hz only kWh Compact Meter with Pilfer Proof Meter box with Sealing Screw Provision (LCD Mni) complete all as specified and directed.

S&F AC Three Phase Static Energy meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Backlit LCD Display of rating 10-60A. (Measures & displays kWh) complete all as specified and directed.

AS ENTERPRISES (BID ID -3405318)

Classic Builders (BID ID -3405837)

K A ANTONY & SONS (BID ID -3405715)

Kuriako Mathai and company (BID ID -3405105)

EXCEL ENGINEERING (BID ID -3405603)

M.J. Leons and sons (BID ID -3405940)

N.O. Antony Contractors (BID ID -3405363)