WB/SPG/ZP/N-21/1/26-27

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore (a) Jetty Deck for Railing (b) Old Beam (c) Old Slab (d) Old pier (e) Repairing

Steel work welded in built up sections/ framed work, including cutting. hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. 2. In gratings, frames, guard bar, ladder, railings. brackets gates and similar works (Jetty railing post etc, M.S. Angle 75x75x8mm, M.S. Angle 75x75x8mm, M.S. Angle 150x150x12mm, M.S. Angle 150x150x12mm, ISMC 150x75x5.4mm, ISMC 150x75x5.4mm, ISMC 150x75x5.4mm, ISMC 150x75x5.4mm, ISMC 150x75x5.4mm, ISMC 150x75x5.4mm, Rail Joist @60Kg/M, ISMB 300x140x7.5, ISMB 300x140x7.5)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in all: Cement mortar 1:4 (1 cement : 4 coarse sand) (a) Brick wall for support.

CEMENT PLASTER (IN FINE SAND) : 20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) (In Ground Floor : Interior Surface, Brick wall for support, Repairing)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (a) Deck slab (a) Gurd post (c) Repair

Centering and shuttering including strutting, propping etc. and removal of form for: ( Lintels, beams, plinth beams, girders, bressumers and cantilevers, Deck slab side, Gurd post, Repair)

Steel reinforcement for R.C.C. work ready to use “cut and bend” rebars of approved make from factory/ workshop to construction site including placing in position and binding all complete. ( Thermo-Mechanically Treated bars of grade Fe-500D or more, i.e. 1.2% of total vol. of conc. @7.850M.T. per Cu.m)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : b) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture: (M.S. Angle 75x75x8mm, M.S. Angle 75x75x8mm, M.S. Angle 75x75x8mm, M.S. Angle 150x150x12mm, M.S. Angle 150x150x12mm, ISMC 150x75x5.4mm, ISMC 150x75x5.4mm, ISMC 150x75x5.4mm, ISMC 150x75x5.4mm, ISMC 150x75x5.4mm, ISMC 150x75x5.4mm, ISMB 300x140x7.5, ISMB 300x140x7.5, Rail Joist @60Kg/M)

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm iv) 80 cm x 60 cm rectangular