Renovation of Gate No. 3 for CSKHPKV, Palampur. (SH Providing and Fixing of Street lights along road from gate no. 3 to admin block chowk and COA chowk)

Amount

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. 3x1.5 Sq. mm. (KEI/Finolex/Anchor make)

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required.Single pole. (L & T/C & S/Schneider make)

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. (L&T/C&S/Schneider make)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size. Armoured cable 6 sq. mm (twin core) (KEI/Finolex/Anchor/L&T make)

Providing and fixing LED outdoor luminaries of 50 Watts LED Flood Light/IP-66/Operating Voltage-AC140v-270V complete with all accessories, connections, testing and commissioning etc. as required. 50W LED 6500K (Philips /Crompton/Havells make)

Supplying and erection of Galvanized Iron (G.I.) Octagonal pole of 6 Mtr. height ,Top – 70mm dia, Bottom – 130mm dia of 3mm thick G.I. sheet. Base plate of minimum dimension 225mm X 225mm X 12 mm, , foundation bolts (4 Nos with 3 Nos of nuts and washers in each) Bolts size should be M24x750mm long with opening door should be 90mm X 350mm bakelite sheet with one. The hole of excavation in ground about 600 mm dia. and given depth to be filled in up to 15 cm below ground level with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 30 cm from ground level as required omplete in all respects. (Bajaj or equivalent make ISI standerd)

Octagonal pole with Single arm bracket for mounting the light fittings

Octagonal pole with double arm bracket for mounting the light fittings (ISI standerd)

Octagonal pole with Triple arm bracket for mounting the light fittings

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 75 mm dia (OD-75 mm nominal) (D-Plast make)

Providing and fixing LED outdoor luminaries energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66/ IP67 luminaire with high power LEDs as light source & exclusively designed polycarbonate cover electronic driver complete with all accessories, connections, testing and commissioning etc. as required. 50W LED 6K (Philips /Crompton/Havells make)

AJAY KUMAR GOVT CONT

Sourab Kuthiala