Annual Plan-Wayanad DP - 2025-26 - Pr No. 490/26 - AK Nagar Plathottathil kunnu Drinking Water Scheme - Poothadi GP - 3500000/--General Civil Work

Amount

OD187736/2025-2026:Sinking well in all classes of soil other than rocks to lines and levels and plumb by scooping out from inside and below the stiening including use of dredgers or any other appliances hire and labour of kentledge ,jetting dewatering ,blasting ,viberating or any other methods including removal of obstrcles and dumping the spoil within a distance of 150m.(well up to 4.00mto 5.5m outer dia) 1st depth up to 3m below spring level(std PWD Data 1965SINO701)

OD187735/2025-2026:Sinking well in all classes of soil other than rocks to lines and levels and plumb by scooping out from inside and below the stiening including use of dredgers or any other appliances hire and labour of kentledge ,jetting dewatering ,blasting ,viberating or any other methods including removal of obstrcles and dumping the spoil within a distance of 150m.(well up to 4.00mto 5.5m outer dia) 2nd depth 3m to 4.5m below spring level(std PWD Data 1965SINO701)

OD187734/2025-2026:Sinking well in all classes of soil other than rocks to lines and levels and plumb by scooping out from inside and below the stiening including use of dredgers or any other appliances hire and labour of kentledge ,jetting dewatering ,blasting ,viberating or any other methods including removal of obstrcles and dumping the spoil within a distance of 150m.(well up to 4.00mto 5.5m outer dia) (2nd depth after 3.00m)4.5m to 6.0m below spring level(std PWD Data 1965SINO701)

OD187733/2025-2026:Sinking well in all classes of soil other than rocks to lines and levels and plumb by scooping out from inside and below the stiening including use of dredgers or any other appliances hire and labour of kentledge ,jetting dewatering ,blasting ,viberating or any other methods including removal of obstrcles and dumping the spoil within a distance of 150m.(well up to 4.00mto 5.5m outer dia) (3rd depth after 3.00m)6m to7.5m below spring level(std PWD Data 1965SINO701)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.12:Centering and shuttering including strutting, etc. and removal of form for:Well steining

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.4:Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)

5.7:Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) derived from natural sources derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources derived from natural sources)

OD308004/2025-2026:PVC pipe 63 mm outer dia. 4 kgf/cm2 FOR WEEP HOLE Add 5% for wastage etc. on (A)

50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

OD365722/2024-2025:Providing and fixing G.I. pipes complete with G.I fittings for pully bar 40 mm dia nominal bore

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Water supply

50.18.9.6.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

OD365729/2024-2025:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement , testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2 (Without trenching, refilling)

50.18.9.5.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2

OD365727/2024-2025:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2 (Excluding trenching and refilling)(Item 50.18.9.5.1 modified)

50.18.9.4.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2

50.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2

OD365725/2024-2025:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement,testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2(Excluding trenching and refilling)(item 50.18.9.3.2 modified)

OD365728/2024-2025:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 (Excluding Trenching and refilling)

18.15.1:Providing and fixing brass bib cock of approved quality :15 mm nominal bore

18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

18.19.1.1:Providing and fixing gun metal non-return valve of approved quality (screwed end): 25 mm nominal boreHorizontal

18.19.2.1:Providing and fixing gun metal non-return valve of approved quality (screwed end): 32 mm nominal boreHorizontal

18.19.3.1:Providing and fixing gun metal non-return valve of approved quality (screwed end): 40 mm nominal boreHorizontal

water tank work and tape flat form

2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.16.1:Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and wallsUnder 20 cm wide

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

10.25.1:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

13.37.1:White washing with lime to give an even shade:New work (three or more coats)

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

22.5:Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.71:Lettering with black Japan pint of approved brand and manufacture

B J High Tech Labour Contract and Construction Co-Operative Society Ltd (BID ID -2420593)

Bidder Name

Stephen.P.M

B J High Tech Labour Contract and Construction Co-Operative Society Ltd