REPAIR/REPLACEMENT OF ROOF TREATMENT, GI/PPGI SHEET, DOOR/WINDOW, TILING AND SANITARY FITTINGS AND OTHER B/R WORKS AT TECHNICAL AND RESIDENTIAL AREA AT ITM MUSSOORIE UNDER GE (I) RND DEHRADUN

Amount

M&L for PCC 1:5:10 type E-2, using 40 mm graded stone agg as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed.

M&L for cement concrete type B-1 (1:2:4) 20 mm graded aggregate in foundation/filling & PCC padding in sunken floors/ roofs (for slope correction) and mass concrete complete all as specified and directed.

Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.

M&L for cutting down removing vegitation plant digging out penetrated roots with tronices looping branches not exc. 10cm girth PROTRUDING over wall roofs by necessary cutting hole in brick / concrete wall/ surfaces and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by makimg cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water) and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 and to match the existing work and finishes and removing of debris out side premises/ defence land including necessary scaffolding etc wk will be carried out upto 6 th storey height bldgs complete all as specified & directed.

M&L for PCC 1:2:4 Type B-1 {using 20mm graded crushed stone aggregate} as in coping/benching bed plates roof kerbs mud stops, including weathering, slightly rounded or chamfered angles and throating etc including necessary form work complete all as specified and directed.

M&L for Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10cm. complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) complete all as specified and directed.

Taking down shutters of any description and make n. exc. 1 sqm each including removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each including removing from site complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each including removing from site complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each including removing from site complete all as specified and directed.

M&L PVC SHEET of wall paneling of thickness 5mm solid consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges and strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement with and complete all as specified and directed. (Note- Including all nesscesary fittings and scafolding for heighted site)

S & F in repair 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frames complete all as specified and directed

S& F Factory Made Solid PVC coulour Moulded Door Shutter with wood free EPS, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing Note: Colour approved by GE / Engr-in-Charge

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for Taking down existing double action floor spring hydraulically regulated and Refixing only after necessary repairs, oiling & greasing etc in proper position with and including proper screw complete all as specified and directed.

S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No.3 universal type, suitable for doors shutters up to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

M&L for taking down existing door closer hydraulicially regulated and refixing after necessary repairs,oiling & greasing etc in proper position with and including proper screw complete all as specified & directed.

S&F in repairs mortice lock, vertical type of size 100 mm with brass body 2 lever complete all as specified.

S&F in repair venetian blind coloured powder coated 35mm wide and 1 mm thick Aluminium alloy blades with opening and closing arrangment including aluminium hanging channel at top with sliding wheel/ring including pulling rope in both side and necessary accessories complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows or partition including aluminium beading, hinges of required size,jointing cleats, screws, dash,fastners,plug for fixing with wall, columns etc complete all as specified & directed.

Fixing only powder coated aluminium frame for doors, windows or partition including aluminium beading, hinges of required size,jointing cleats, screws, dash,fastners,plug for fixing with wall, columns etc complete all as specified & directed.

S&F Powder Coated aluminium window and ventilator shutters side hung type without sash bars, , aluminium section weighing not less then 0.55kg/m including necessary jointing cleats/ glazing clips, rubber neoprene packing, anodised aluminium snap beading , screws, anodised aluminium fittings such as peg stay 150mm long (1 No) hinges type B-21 100mm long ((2 Nos) suitable handle (1 No) complete all as specified and directed.

S&F powder coated of any colour aluminium door shutters, aluminium section like lock rail, bottom rail 115mmX38mmX1.00mm thick and top rail and vertical rail 100mmX38mmX1.00mm thick mm including necessary jointing cleats/glazing clipx, rubber neorene paking, handles 02 Nos in each door, locking arrangment, aluminium snap beading screw etc, complete all as specified and directed. (panels likes prelaminated particle board / sheet glass shall be measured and paid seprately)

Taking down aluminium shutter exc. 1 Sqm and n.exc 2 Sqm each and refixing the same opening after resecuring or easing and adjusting shutters and replacement of top rail, lock rail or bottom rail where required of any description. complete all as specified & directed.

Taking down shutters of aluminium of any description exc. 2 sqm each, resecuring and easing, adjusting and refixing in the same opening complete all as specified & directed.

S&F 5 mm thick aluminum composit pannel fixed or laid on door or partition by using rubber based adhesive complete all as specified & directed.

S&F mild steel for framed work such as grills, gratings, etc With ends of bars shouldered and riveted, or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con-forming to Fe. 290. Gde-E-165 complete all as specified & directed.

S&F mild steel work as in Joist,channel,angle, or tee sections, fixed independently,without connecting plates, etc. ( cut to ordinary lengths i.e within 20 mm of the length indicated , conforming to gde Fe 410-W (Gde E-250) Quality complete all as specified and directed

M&L for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F mild steel work as in bands,strap, supports or stay for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasp and staples, chains hand made sliding bolts, clamps, hold fasts, wallties hook for hanging fans,plain angle cleats for secruing purlins to wood trusses or rafters, knee piece inserts, two way and tree ways straps , plate washers and similar samllarticles confirming to Fe 290 or E-165 complete all as specified and directed

M&L for greasing and oiling in old rolling shutters (area exceeding 10.00 sqm of each shutter) of each parts i.e guide channels, cranks, springs, gearboxt and locking arrangement etc. with and including repairs as required for smooth functining of rolling shutter complite all as specified and directed.

M&L for greasing and oiling in old rolling shutters (area not exceeding 10.00 sqm of each shutter) of each parts i.e guide channels, cranks, springs, gearboxt and locking arrangement etc. with and including repairs as required for smooth functining of rolling shutter complite all as specified and directed.

M&L for greasing and oiling in old steel collapsible shutters (any size) of each parts with and including repairs as required for smooth functining of collapsible shutter complete all as specified and directed.

Taking down carefully unservicable ball bearing from rolling shutters and S&F ball bearing heavy duty as required size at approprite place, match the existing of gear operated type rolling shutter complite all as specified and directed.

Taking down carefully unservicable spring from rolling shutters and S&F new spring heavy duty as required size at approprite place, match the existing of gear operated type rolling shutter complite all as specified and directed.

Taking down carefully unservicable safty lever mild steel lock any type from rolling shutters and S&F new safty lever mild steel lock 4 lever heavy duty as required size at approprite place, match the existing of gear operated type rolling shutter complite all as specified and directed.

M & L for sunken floor treatment as specified here-in-after, applying a priming coat of suitable primer over cleaned concrete surface, applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm, applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application and finally applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm over polymeric membrane complete all as specified and directed. Note:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorized applicator of manufacturer approved by GE.

Preparing RCC roof slab top by wire brushing and cleaning the dust and forign materail etc complete and applying a coat of hot blown bitumen 85/25 grade @ 1.20kg/Sqm over a coat of bitumen primer @ 0.40 ltrs/Sqm and there after laying of a layer of APP based polymeric membrane (five layered with centre core as 100 microns high molecular high density polyethylene film) weighing 3kg/Sqm and will be laid as per MES SSR Pt-I para 11.43.2.2 with minium side lap 75 mm and end Lap of 150 mm bonded with hot blown bitumen 85/25 gde penetration @ 1.20 kg/sqm and blinded with fine sand in dry condition (pleable free) @ 0.50 kg/sqm dusted over the bitumen coat complete all as specified and directed. Note:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorized applicator of manufacturer approved by GE.

M&L for application of Silicon waterfroofing adhesive to stop leakage/seepage on roof of GI/AC corrugated or plain sheet at any height and slope up to four story buildings up to four storied bldgs complete all as specified and directed.

Providing and fixing false ceilingat all heights with semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99 %, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85 % (minimum) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped (galvanised @ 120 grams per sqm inclding both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm cross -T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm,suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm ) i.e 50mm long ,8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85 x25 x2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40 mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm cedntre to centre and 40 mm long dry wall wood screws.the work shall be carried out as per specifications, drawing and as per directions of the Engr-in-Charge.

M&L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa it shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm /sqm of coating (total both surfaces) as in roof covering /cladding to wall, fixed with self tapping screws neeoprene and EPDM washers complete all as specified and directed.

M&L for Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa it shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm /sqm of coating (total both surfaces) as in roof covering /cladding to wall, fixed with self tapping screws neeoprene and EPDM washers complete all as specified and directed.

M&L for 75 mm thick for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in subbase for laying floor finishes complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in sub base of floors complete all as specified and directed.

M&L for non skid Ceramic tiles,first quality( of approved class , colour and design/ shade ) 6 to 7 mm thick( square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 15 mm Screed bed in CM 1: 6 with complete all as specified and directed.

M&L for non-skid coloured ceramic tiles first quality (of approved class, colour and design/shade) 7 to 8 mm thick (square/rectangular) as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4),with complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of size 300x200x7mm/ 350x250x7mm/ 450x350x7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid Ceramic tiles,first quality( of approved class , colour and design/ shade ) 6 to 7 mm thick( square/ rectangular) area of each tiles exceeding 0.0.06 sqm but not exceeding 0.11 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 15 mm Screed bed in CM 1: 6 with complete all as specified and directed.

S&F in repair for 2.00mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fittinge complete all as specified and directed

M&L for 75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work complete all as specified and directed.

M&L for taking down/dismantling of existing roof treatment / cement plaster of any description such as PCC Padding/ Coba treatment/ mud phuska/Lime conc terracing including screed bed etc. Hessian base felt/tar felt etc. (any type and thickness) with and including, removing debris out sideMOD Land at contractor is own arrangement ) complete all as specified & directed.

M & L for taking down old cement plaster/Grit wash on stone wall or brick surfaces of walls including raking out joints, hacking for key and scrubbing down with water with and including, removing debris out sideMOD Land at contractor is own arrangement ) complete all as specified & directed. complete all as specified and directed.

M & L for repair to chajjas including necessary cement concrete type B-0 (1:2:4)12.5 mm graded stone aggregate and15mmthick plastering in CM 1:4 to disturbed portion and finishing the surface with two coats of cement base paint incl preparation of surface complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:3 on fair faces of brick/concrete surfaces (horizontal or vertical)mixed with WPC. (WPC will be measured & paid separately) complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete /brick surface in cement mortar 1:6 finished fair and even as in wall etc complete all as specified and directed.

M&L for Rendering 10 mm thick on fair faces of concrete /brick surface in cement mortar 1:3 finished even and smooth without using extra cement as in ceiling and similar other work complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement etc complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only under respective item of sch A.

M&L for prepration of new plaster surfaces of wall and applying two coat of oil bound distemper over and including a coat of alkali primer & 3 mm thick wall care puttty complete all as specified and directed.

M&L for prepration of new plaster surfaces of ceiling and applying two coat of damproof and weather coat of exterior weather proof paint over a coat of primer after prepration of newly plastered surfacescomplete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coat of damproof and weather coat of exterior weather proof paint over a coat of primer after prepration of newly plastered surfaces up to 4th story buildings of walls including scaffolding and all necessary items complete all as specified and directed.

M&L for Complete removal of existing treatment of old surface and washing rubbing down and stoping of distempered and painted surface of wall and applying two coats of cement based paint complete all as specified and directed.

M&L for complete removal of existing treatement by scraping, washing, rubbing down or stopping distempered or painted surfaces etc of walls plastered or un-plastered & removing all vegetation growth, cleaning & applying of Birla/JK white wall putty approx 1 mm thick as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of water proof primer complete all as specified and directed.

M&L for complete removel of existing treated plastered or unplastered surfaces on walls and applying of Birla/JK white wall putty approx 1 mm thick as per manufacturer's instruction on old prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two coat of weather proof exterior paint silicon based over a coat of primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.

M&L for 4.8 mm thick sheet glass ordinary quality in panes not exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M&L for 4 mm thick figured glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Fixing only 4.8 mm thick or any thickness of sheet glass ordinary quality in panes exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

Solar control filim 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified & directed.

M&L for complete removal of existing treatment on old painted steel surfaces over 10cm width or girth and making good with & including by necessary red lead putty and make the surface smooth by rubbing with sand papers etc and applying Two coat of synthetic enamel paint on old prepared surfaces of steel complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F in repair 32 mm dia GI tubing of medium grade as drain out pipe of sunken floor / wall complete all as specified & directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) & including CI trap & connecting fitting as required set in plain cement concrete (1:3:6) type C-1 and connecting to flusing cistern and trap & connecting fittings as required and making good to floor with and including removing WC outside MOD Land complete all as specified and directed.

S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including removing WC outside MOD Land complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets and including removing WHB outside MOD Land complete all as specified and directed.

S&F in repair soap dish brass, chromium plated, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair bib taps brass fancy type, brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair fancy type angular stop cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified & directed.

S&F in repair CP unirnal Push Cock incl necessary fittings complete all as specified and directed

S&F in repair CP Urinal Spreader incl necessary fittings complete all as specified and directed

S&F in repair chromium plated brass hand ablution health fauset with 1.50 meter long flexible tube fancy type with necessary brass nuts & rubber washers cover with chromium plated spring complete all as specified and directed.

S&F in repair 100mm dia cast Iron floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.

S&F PVC conections 15mm size with PTMT nuts of 450 mm long fixed in repair complete all as specified & directed.

S&F in repair 32 mm bore PVC waste pipe for WHB approved quality complete all as specified and directed.

S & F in repair tubular towel rail 20mm dia 600mm long of brass chromimum plated complete all as specified and directed.

Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed.

Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed.

S&F for laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) for 20 mm dia pipes with and including all new fittings complete all as specified and directed.

S&F for laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) for 15 mm dia pipes with and including all new fittings complete all as specified and directed.

Disconnecting & taking down existing water tank of capacity exc 250 liter and not exc. 500 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 500 lts capacity (cylindrical vertical with closed top) hoisted with and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I complete all as specified & directed.

Disconnecting & taking down existing water tank of capacity exc 500 liter and not exc. 1000 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 1000 lts capacity (cylindrical vertical with closed top) hoisted with and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I complete all as specified & directed.

S&F PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F PVC (SWR) bend 110mm dia , any radius as required and jointed with approved adhesive complete all as specified and directed.

S&F PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid trenches or in floor complete all as specified and directed.

S&F PVC (SWR) junction single (Single T) equal or un equal 110mm dia , any radius as required and jointed with approved adhesive complete all as specified and directed.

S&F in repair PVC water tank covers screw head type including four Nos of PVC nut and bolt in existing PVC water tanks of Cap 500 ltrs to 1000 ltrs cap with fixing arrangement complite all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described and removal of dismantling materials with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles and with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed.

Taking down Cast iron/PVC pipe of any dia and size fixed on wall or floor including all fittings and removing of debrish to with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed.

Dismantling aluminium or wooden partition work or asbestos cement sheet partition or boarding of any description , fixed in position with nails with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed.

Dismantling of wall and ceiling boards any thickness including cover filletes with and including with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness complete all as specified and as directed. Notes for item No. 1 to 111:- (i) The work will be carried out upto 4th storey bldgs. Hence necessary complete scaffolding and other safety arrangements will be managed and made by tenderer/ Contractor accordingly at own expense. (ii) Tenderer kind attention is also invited to srl clause 1.16 of Sec-I on srl page No 1 to 111 (General rules for Safety in Construction) as specified in SSR Pt-I (2009) for safety measures/ precautions. (iii) Steel scaffolfing is to be used in the work. (iv) Necessary arrangement for temporary plug the / door / window / ventilator opening at time of taking down plaster/ new plaster till completion of work. Made by Tender / Contractor at own expense.

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3289060)