SPECIAL REPAIR TO BATHROOM OF BUILDING NO. P-145, 146 AND P-360 (OR LINE) OF 221 FD REGT AT CLEMENT TOWN

Amount

Dismantling of floor hearth or wall tilling including cement mortar bedding removing serviceable tiles to store rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exe. 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in sub base of floors 25mm thick complete all as specified and as directed.

M & L joint free non skid ceramic colour tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm thick cement screed bed in CM ( 1 : 6 ) complete all as specified and as directed.

M & L glazed ceramic joint free tile coloured in vertical surface 350 x250 x 7mm/ 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick cement screed in CM (1 : 4) complete all as specified and as directed.

Taking down cement plaster of any description complete all as specified and as directed.

M & L 15mm thick rendering (1:6) on fair faces of brick work or concrete surfaces finished even and smooth(without using extra cement) complete all as specified and as directed.

M&L 15mm thick rendering cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed.

M&L 5mm thick rendering cement mortar over celing concrete surfaces in cm (1:3) including finishing the surface even and fair complete all as specified and as directed.

M & L three coats of white washing to new plastered surfaces of walls after preparation of surfaces complete all as specified and as directed.

M & L three coats of white washing to newly plastered surfaces of ceilings after preparation of surfaces complete all as specified and as directed.

M & L one coat of white washing to old plastered surfaces of ceilings after preparation of surfaces complete all as specified and as directed.

M & L one coat of white washing to old decorated surface walls after preparation of surface complete all as specified and as directed.

Taking up or down steel tubing and connection of 15mm dia complete all as specified and as directed.

Taking up or down steel tubing and connection of 20mm dia complete all as specified and as directed.

S & F 15mm dia GI tube medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing old steel water tubing 15mm bore and connections in new or old positions as wall,ceiling,floors etc complete all as specified and as directed.

S & F 20mm dia GI tube medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing old steel water tubing 20mm bore and connections in new or old positions as wall,ceiling,floors etc complete all as specified and as directed.

S & F in repair 20mm dia gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs PVC water storage tank cylindrical,triple layer vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Litre with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified and directed.

All as item No 21 here-in-before but 1000 Ltr capacity of tank. and ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 25mm bore for iron pipe complete all as specified and as directed.

Cutting chases, pinning in brick wall and making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10cm girth complete all as specified and as directed.

S & F in repair vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rests and connection to flush pipe complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white including fixing with trap including PVC matching seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10 ltr capacity white colour including with inlet ball, valve, float and handle including bracket, flush pipe of polyethylene of low or high density or PVC pipe 32mm dia for low level cistern complete all as specified and as directed.

S & F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

S & F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with CP Urinal spreader, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S & F in repair 15mm fancy type chromium plated Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repair 15mm long body fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type CP with long shank and cup (concealed type) complete all as specified and as directed.

S & F in repair 15mm fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type complete all as specified and as directed.

S & F in repair 15mm dia and 600mm long PVC connection pipe with PTMT nuts at both ends complete all as specified and as directed.

S & F in repair 15mm dia fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed but fancy type complete all as specified and as directed.

S&F in repair 20 mm dia and 600mm long between flanges brass chromium plated tubular towel rail complete all as specified and as directed.

S&F in repair 15mm dia CP health foucet with 1.25m flexible tube and wall hook complete all as specified and directed.

S & F in repair brass hat and coat hooks, solid body 175 to 250mm long complete all as specified and as directed.

S & F in repair Soap dish, vitreous China white, approximate size 160x160x90mm complete all as specified and as directed.

S&F in repair CP overhead shower 125 mm round shape single flow (ABS body chromium plated with gray face plate) with rubit cleaning system fixed in 15mm bore of pipe complete all as specified and directed.

S & F in repair waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms) complete all as specified and as directed.

Taking up 80 mm cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed.

Taking up 100 mm cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed.

S & F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F 75mm Stack clamps made out of size 50mm by 5mm flat iron and 16mm dia round iron stays, inclu nut and bolts and securing ends of stays to wall or roof complete all as specified and as directed.

S & F 100mm Stack clamps made out of size 50mm by 5mm flat iron and 16mm dia round iron stays, inclu nut and bolts and securing ends of stays to wall or roof complete all as specified and as directed.

S & F 75 mm PVC (SWR) bends any radius complete all as specified and as directed.

S & F 110 mm PVC (SWR) bends any radius complete all as specified and as directed.

S & F 110 mm PVC (SWR) junction single, door (Single T) equal or unequal complete all as specified and as directed.

S & F 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S & F 75 mm PVC (SWR) door bends any radius complete all as specified and as directed.

S & F 110 mm PVC (SWR) P Traps long arm complete all as specified and as directed.

S & F 75 mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5sqm each complete all as specified and directed.

S&F solid PVC door frame old size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, fixed in opening as per specification & drawing shown in section 8 of SSR Part II complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails .MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,bottom rail and lock rail, Paneling of plain colour PVC sheet to be fitted in MS frame welded with and including stainless steel hinges 100mm medium weight complete all as specified and directed.

M&L 150 mm long aluminum anodized barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm long aluminum handles fabricated type anodized complete all as specified and directed.

S/Fmild steel butt hinges medium wt cold rolled 100 mm long complete all as specified and as directed.

S&F steel ventilators top hung shutter including hinges and peg stays etc complete all as specified and as directed.

Supply and fixing in repairs 3mm thick sheet glass not exc 0.50 sqm each ordinary quality fixed with putty complete all as specified and as directed.

M&l preparation of steel surfaces exc 10 cm width or girth and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L 10mm thick rendering in CM ( 1 : 3 ) mixed with water proofing compound on fair faces of brick walls or conc surfaces and finished even & fair complete all as specified and as directed. (Note : water proofing compound will be measured and paid separately as a supply only item)

Supply only liquid water proofing compound complete all as specified and as directed.

M & L for plain cement concrete Nominal mix (1:5:10) type E2(using 40 mm graded crushed stone aggregate) as in sunken floor complete all as specified and as directed.

Demolition of cement concrete (unreinforced) above ground floors and paving exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C1 (Using 20mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M& L for two coats of elastomeric compound ie super latex of Dr Fixit or equavalent on concrete surfaces after cleaning of sunken surface (vertical and horizontal) by removing all the loose mortar, laitance, dirt, dust etc by chiesel hammer/wire brush anc air blower machine complete all as specified and as directed.

Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified & directed.

Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified & directed.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of CI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-

One light/fan/bell/exhaust fan point controlled by one, 01-way Piano type switch 06 Amp complete all as specified & directed.

One 3pin 5 Amps socket out let on same board controlled with other switches by one, 01-way Piano type switch complete all specified and directed.

All as per item No 72 above but with 2.5 Sqmm PVC insulated FRLS cable for 15 Amps power point complete all as specified & directed.

Supply and fixing switch piano flush type single pole, one-way 5 Amps, 240 Volts AC complete all as specified & directed.

Supply and fixing switch piano flush single pole, one-way 16 Amp, 240 Volts AC complete all as specified & directed.

Supply and fixing socket out let 5 Amps flush type complete all as specified & directed.

Supply and fixing socket out let 5/6pin 5 Amp and 15 Amp flush type (multi) suitable for 240 Volt AC complete all as specified & directed.

Supply and fixing ceiling rose 3 terminal/PVC/ Polycarbonate, isolated body complete all as specified & directed.

Supply and fixing batton/angle holder insulated bodywith back plate including 09 Watt LED Bulb complete all as specified & directed.

S& F wall mounted LED batten Box type fitting Blu colour end caps pre-wired LED fitting all as per cat part No DMLN 1 LGT 8-16 with & including LED T8 tubular lamp complete all as specified & directed. (Make Cromption or equivalent make in Wipro/ Havells /Philips as approved by GE) .

S & F in repair LED building security light with bracket and fixing arrangements 25 watt LED with bracket complete all as specified and directed. Cat Part No LSTS-25 CDL of Crompton or equivalent make in Havells/ Wipro as approved by GE).

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar complete all as specified & directed. (Make- Havells/ legrand/ Hair/ Schnider as approved by GE).

Supply and fixing MCB SP 06 to 32 Amp 'B' series 10 KA repturing capacity complete all as specified & directed. (Make- Havells/legrand/ Hair/ Schnider as approved by GE).

Supply and fixing MCB SPN 40 Amp, 'B' series, 240 V AC 10 KA repturing capacity complete all as specified & directed. (Make- Havells/legrand/ Hair/ Schnider as approved by GE.)

Supply & fixing exhaust fan Metallic body 300 mm sweep complete with all fittings all as specified. (Make:- Usha/Bajaj/Orient)

Supply and fixing sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified & directed.

M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 04 mm as earthing lead with nut bolts etc to earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

Nanda Brothers