Renovation of Dental Unit

Amount

25.1 Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge.

25.7 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including

13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) Door 3 x 3.20 x 0.30 = 2.88 wall 4 x 0.30 x 2.80 = 3.36

13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

121.1.1.3 Providing and fixing aluminium work for doors, windows, ventilators and partitions

21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge.

Sealing works with tkt panal

Interial furnishing with plywood

Supplying furniture as per requirements Executive Table 4’X2’ (Rubwood) with Chair 1 No Visitors Chair - 6 nos

17.7.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar

18.21.2.1 Providing and fixing u plasticised PVC connection pipe with brass unions:45 cm length15 mm nominal bore

18.51.1 Providing and fixing C .P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.1 5 mm nominal bore

18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore

17.28.1.2 Providing and Fixing P.V.C waste pipe for sink or wash basin including PVC. Waste filling complete, semi rigid pipe 40mm dia

18.17.2 Provide and fixing gun metal gatevalve with C.I. Wheel of approved quality (screwed end) :32mm nominal bore

17.31 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers completed

od217579/2024_2025 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including <br> jointing with PVC solvent cement -63mm dia line trap <br> detailes of cost of one no.

od217580/2024_2025 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including <br> jointing with PVC solvent cement -110mm dia Multi trap <br> detailes of cost of one no.

od217581/2024_2025 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including <br> jointing with PVC solvent cement -50mm dia Tank connector <br> detailes of cost of one no.

50.18.7.3.1 Providing and fixing PVC pipes, fittings including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & testing of joints complete as per direction of Engineer-In-Charge 25mm dia 12 Kgf/cm2 - internal work - Exposed on wall

50.18.7.4.1 Providing and fixing PVC pipes, fittings including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & testing of joints complete as per direction of Engineer-In-Charge 32mm dia 10 Kgf/cm2 - internal work - Exposed on wall

50.18.9.8.1 Providing and fixing PVC pipes including joining of pipes with one step PVC solevent cement, trenching, refilling & testing of joints completes as per the direction of Engineer in Charge. 75mm dia 6 Kgf/cm2

50.18.9.9.1 Providing and fixing PVC pipes including joining of pipes with one step PVC solevent cement, trenching, refilling & testing of joints completes as per the direction of Engineer in Charge. 110mm dia 6 Kgf/cm2

50.18.9.13.1 Providing and fixing PVC pipes, fittings including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & testing of joints complete as per direction of Engineer-In-Charge 25mm dia 12 Kgf/cm2 - External work - Exposed on wall

50.18.9.14.1 Providing and fixing PVC pipes, fittings including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & testing of joints complete as per direction of Engineer-In-Charge 32mm dia 10Kgf/cm2 - External work - Exposed on wall

50.18.9.15.1 Providing and fixing PVC pipes, fittings including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & testing of joints complete as per direction of Engineer-In-Charge 40mm dia 10Kgf/cm2 - External work - Exposed on wall

50.18.9.17.1 Providing and fixing PVC pipes, fittings including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & testing of joints complete as per direction of Engineer-In-Charge 63mm dia 6Kgf/cm2 - External work - Exposed

50.18.9.20.2 Providing and fixing P VC moulded fittings/ accessories for Rigid PV C pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow

50.18.9.20.3 Providing and fixing P VC moulded fittings /accessories for Rigid PV C pipes, including jointing with PVC solvent cement - 63 m m dia Door Elbow

50.18.9.20.4 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend

50.18.9.20.5 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x63x63 mm dia Tee

50.18.9.20.7 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl

50.18.9.22.1 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.2 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow

50.18.9.22.4 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Bend

50.18.9.22.5 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 x110x110mm dia Tee

1.10.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required. Group A

1.10.2 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required. Group B

1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required. Group C

1.14.1 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.3 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amp switch

1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

90.10.3.15 Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

90.10.1.2 Supply & Fixing the following types7 sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )2 module moulded plastic box on surface

90.10.1.6 Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )8 module moulded plastic box on surface

1.28.1 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

1.28.5 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module

1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required (for light plugs to be used in non residential building)

1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.10.4 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing

2.12.1 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.1 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

od222309/2024_2025 Supplying and fixing 15 W LED panel light on ceiling with standard make (Havells / Syska/ Crompton/ Equivalent as approved by the site engineer

od221496/2024_2025 Supply and installation of 1200 mm, 20 W LED tube light with all accessories as required. (Make: Crompton/Philips/Wipro)

90.4.5.2 Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -Sstar rated ceiling fan complete with 300mm down rod , canopies, shackles and blades working on 230V/240V single phase A/C

Poly Bath Acrylization/ Polymerization Unit

Polishing Lathe – 1,400/2,800 RPM, 0.40 kW

ALERIO NEO PORTABLE X-RAY

Electric Wax Knife Waxlectric I

Vibrator Small Size

Vacuum Mixer - Twister

Model Trimmer, MT3 with Klettfix Disc

Die Cutting Diamond Disc with Mandrel

Lab Micromotor, Brushless C Heavy Duty

Lab Micromotor, 35000rpm

Pre-Heating Furnace, Small, 1.7KW

Vacuum Pressure Induction Casting Machine+ Ind. Chiller

Micro Sand Blaster with 2 Jars, Basic Classic

Ceramic Firing Furnace with Vac.Pump, Programat 300

Ultrasonic Cleaner

Transportation and installation

MOUTH MIRROR WITH HANDLE --GDC

TWEEZER - GDC

PROBE-GDC

EXPLORER-GDC

CONDENSOR-GDC

BALL BURNISHER-GDC

T BURNISHER-#DOUBLE ENDED #TB2#3

SPOON EXCAVATOR-GDC

LACRON CARVER-GDC

PLASTIC FILLING INSTRUMENTS -GDC

CEMENT SPATULA-GDC

WAX SPATULA-GDC

WAX CARVER - GDC

WILLIAMS PROBE - PREMIUM # POW6#6

BONE FILE- GDC

BONE CURETTE - GDC

PERIO STEEL ELEVATOR -GDC

ARTERY FORCEPS (STRAIGHT/CURVED)

ARTERY FORCEPS - GDC

TOOTHED FORCEPS - GDC

NEEDLE HOLDER - GDC

SCISSORS - GDC

GRACEY CURETTES SINGEL PCS(sf/10#7)

GRACEY CURETTES C/C MINI FIVES SET OF 7 # #GCCCMSP7

PERIOSTEAL ELEVATOR MOLT 9 LARGE #P9#3

PERIOSTEAL ELEVATOR MOLT 9 SMALL #

PERIOSTEAL ELEVATOR #PREMIUM #

DIRECT SINUS LIFTING INSTUMENT (S/8) #

OSTEOTOME CONCAVE (S/6) IN POUCH #

MOUTH MIRROR WITH HANDLE

TWEEZER

SPOON EXCAVATOR

LACRON CARVER

H B CARVER

ENAMEL HATCHET

PLASTIC FILLING INSTRUMENTS

CEMENT SPATULA

WAX SPATULA -

WAX CARVER

WILLIAMS PROBE -

BONE FILE

PERIO STEEL ELEVATOR

Dental Dynamics DD Warwick James Elevator Set (3 Pcs)

*FULLY ELECTRICALLY OPERATED DENTAL CHAIR

AUTOCLAVE

COMPRESSOR S

SUCTIONS

Other Items

RVG Kodak 5200

CLINICAL MICRO MOTOR FULL SET – MARATHON

LIGHT CURE – WOODPECKER I LED

ENDO MOTOR WITH APEX LOCATOR