SPECIAL REPAIR TO GUN SHED AND PROVISION OF 08- TOILETS AND 04- BATHROOMS WITH SEPTIC TANK AND CONNECTED WORK AT SHIKARGARH IN ARMY AREA JODHPUR

Amount

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L PCC 1:4:8 type D2 (40 mm graded aggregate) in foundation filling and mass concrete etc complete etc.all as specified and as directed.

M&L for brick work with fly ash bricks (old size bricks), straight or curved on plan exc 6mtr mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M&L for brickwork with fly ash bricks (old size bricks), straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:6) complete all as specified and as directed.

M&L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides of soffits (if any) of foundations and plinth beams and similar work etc; fair finish surfaces complete all as specified and as directed.

M&L for Form work to sides and soffits of floor or roof RCC beam sides of lintel beam flat fair finish surfaces complete all as specified and as directed.

M&L for Formwork for chullah hoods, chajjas through and similar items including edges, surface fair finished complete all as specified and as directed.

M&L for Form work to soffits of suspended slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping), rough finish surfaces complete all as specified and as directed.

M&L for Form work to edges of concrete flats, floor and roofs not exceeding 20cm wide (horizontal or sloping), rough finish surfaces complete all as specified and as directed.

M&L for providing RCC 1:11/2:3 type A-1 (using 20mm graded stone aggregate) as in foundations, including raft footings, foundations beams, plinth beams, bases of columns etc; complete all as specified and as directed.

M&L for providing RCC 1:1-1/2:3 type A-1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc; complete all as specified and as directed.

M&L for providing RCC 1:1-1/2:3 type A1 (using 20mm graded stone aggregate) as in beams, lintel up to 1.5m clear span, lintel bands etc; complete all as specified and as directed.

M&L for providing RCC 1:1-1/2:3 type A1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in roof, landings, balconies, canopies and in shelves etc; complete all as specified and as directed.

M&L for providing RCC 1:1-1/2:3 type A1 (using 20mm graded stone aggregate) as in chajjas etc; complete all as specified and as directed.

M&L for Reinforcement 10mm dia and over TMT bars cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Reinforcement 8 to 10mm dia TMT bars cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia in stirrups complete all as specified and as directed.

M&L for carrying out water proofing treatment for roofs in the following stages - (i) Rendering 10mm thick in 1:4 mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement. (ii) First coat of bitumen primer confirming to IS 3384 @0.300 Kg/ Sqm over plastered surfaces (iii) Second layer of 3.0 mm thick APP modified polymeric membrane with centre core of Single non woven polyster reinforcement and having weight 3.60 Kg/ Sqm with mineral gravel finish on top complete laid with blown type bitumen grade 85/25 @ 1.20 Kg/ Sqm complete all as specified and as directed. (iv) Finally applying two protective coats of bituminous aluminium based reflective paint to safeguard against UV, including preparing of old surfaces of roof remove all corrosion products brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl washing , rubbing down and stopping of painted surfaces (second coat shall be applied after 24 hrs or as per manufacture's instructions).

Supply only integral water proofing liquid ISI marked Make: Pidiproof LW or equivalent

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm each layer in hard/dense soil all as specified and directed.

Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and directed.

M&L for 15 mm thick rendering on stone/ brick masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement over stone wall surfaces all as specified and as directed.

M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for preparing new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L for two coats of cement base paint on new pointed/plastered surfaces of walls including preparation of new surfaces over a coat of primer all as specified and as directed. B60

M&L for 75mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified.

M&L for PCC 1:2:4 type B0 25 mm thick using 12.5mm graded stone aggregates as in sub floors/base floors under tiles as in leveling course etc all as specified and directed.

M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer in CM1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.

M&L for 16 -18mm thick granite (black colour) work (table rubbed and polished) in steps, shelves, jambs, pillars, partitions, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

M&L for Jodhpur stone slab patti 40 to 50mm thick set in over and including 15mm thick cm 1:4 and jointed & pointed in neat cement slurry as in floors, plinth protection, steps etc; complete all as specified and directed.

S&F Solid PVC door frames factory made of size 50x47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and as directed from approved manufacturer.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with neat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification of drawing complete all as specified and as directed.

M&L for fabrication of aluminium powder coated window any pattern & design (openable with hinges, sliding, tilt and turn, casement , fixed type, villa type, ventilators) fabricated with anodized aluminium rectangular or any type section in frame with approved design & patterns including provn of fixing galvanised mild steel wire cloth on the outer side of frame etc; fixed in position all as specified and directed. Note:- Glass pane & galvanised mild steel wire cloth shall be measured and paid separately under respective Items of Sch 'A'.

S&F for figured glass, pin head type ordinary quality, 4mm thick, area of each pane not exceeding 0.5Sqm and glazing with aluminium beading in aluminium frame all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed.

S&F butt hinges, medium weight ,stainless steel of 100mm long size and fixed complete all as specified and as directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, 150mm long all as specified and as directed

S&F extruded aluminium alloy handles, 150mm long size, fabricated type, anodised all as specified and as directed.

Supply and laying 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

Supply and laying 25 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

S&F Bib tap,15mm bore, fancy type, brass chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

S&F Angle valve,15mm bore, fancy type, brass chromium plated, concealed type, with long shank and cup, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed.

S&F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends with iron pipe and fixed all as specified and as directed.

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends with iron pipe and fixed all as specified and as directed.

S&F for Pillar tap, brass, 15mm dia, with capston heads, chromium plated, fancy type screwed down, high pressure, with or without lettered hot or cold, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin all as specified and as directed.

PVC connection, 15mm size, with PTMT nuts, of length 450 mm long including taking down of existing old pipe all as specified and as directed.

Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified.

Supply only PVC flushing cistern, low level,10 litres capacity , valveless, syphonic action type, white, with inlet, ball valve, float, handle, flush pipe of polythlene of low or high density or PVC, 32 mm dia all as specified and as directed

S&F in repair for Vitreous china urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement , suitable PVC waste pipe with brass unions, including making all connections to existing connections, complete all as specified and as directed.

Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified.

S&F in repair CP towel rail 450mm long fixed with and including CP brass screws and wooden/ plastic cleats complete all as specified.

S&F in repair CP grating doom 100mm dia complete all as specified.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top), in white colour hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms.) all as specified and+B88 as directed.

M&L for 100mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified.

M&L for 60mm thick factory made pre cast cement concrete rubber moulded laquer finish using chemical and admixture inter locking tiles having compressive strength not less than 350 kg/Sqcm, of shape and colour as approved by GE , laid over and including 25mm thick compacted approved sand cushioned surface, joints filled by fine sand and compacting the top surfaces of paver blocks after laid etc of approved make all as specified and as directed.

M&L for factory made precast cement concrete solid blocks M-30 Grade, using 20 mm graded crushed stone aggregate as in kerb stones of any size (with plain or interlocking joints as directed) set in cement mortar 1:4 for path edgings etc; embedded in position including all necessary excavation, tamping ground arround blocks and removal of rubbish/ surplus soil etc., complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 100mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 75mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 100mm bore pipe cast iron cowls, complete all as specified.

S&F 75mm bore pipe cast iron cowls, complete all as specified.

M&L cast iron up to 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, 'Y' junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified.

M&L 100mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.

M&L 75mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.

S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

M&L for cement concrete (1:4:8) type D-2 for 150mm dia pipe bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in complete all as directed and specified

M&L for Reinforced concrete pipes, of 150mm bore, class NP2, laid in trenches and jointed in cement mortar as specified complete with collars complete all as specified.

M&L for PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in surfaces channel and drain of man holes finishing surfaces even and smooth complete all as specified and as directed.

S&F in repair precast steel fibre reinforced concrete (SFRC) manhole cover with frames (ISI marked) of overall size 1200x1200x75-100mm (clear opening 600x600mm for square and 600mm dia for round shape) are provided with suitable mild steel rims to prevent from chipping of edges and enable clear opening with provision of easy lifting hooks which are duly protected against corrosion laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated) any type sheets in any position roof coverings complete all as specified.

S&F0.50 mm thick coloured pre-painted galvalume aluminum zinc coated GI based corrugated/ plain steel sheet having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as directed& as specified.

Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified.

S&F Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel, flat or MS hollow square/ rectangular any type, size/ sections), including distance pieces, cleats etc conforming to FE- 290 (Gde-E- 165), including fabrication, erraction and fixing complete all as specified.

Taking down steel gate/ door shutter any type, description, design fixing in any position exceeding 15.00sqm not exceeding 25.00 sqm each complete all as specified.

S&F framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ any section size with gusset plates, rails, braces, framed complete drilled for fixing MS sheet of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) complete all as specified and directed by Engineer-in-charge.

S&F Mild steel 1.00mm thick plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including fixed to steel framing with plain 40mm lap joints with welded seams, including bending or turning up mitred angles etc as required complete all as specified and directed by Engineer-in-charge.

S&F Mild steel 0.63mm thick plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including fixed to steel framing with plain 40mm lap joints with welded seams, including bending or turning up mitred angles etc as required complete all as specified and directed by Engineer-in-charge.

S&F Expanded metal, cut to length, bent to shape as required, welded with steel frame and fixed, complete all as specified and directed.

Excavation in post holes in soft/loose soil not exceeding 0.50 Cubic metre each and getting out, returning, filling in and ramming earth or broken rubble moxed with earth around,in layers not exceeding 25cm, watering and removal of surplus spoil to a distance not exceeding 50 metres and making good surface complete all as specified.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified.

Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.

Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specifide.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

M&L for mirror polished machine cut Kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and as directed.

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed

Dismantling of stone/ brick work masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work, serviceable stone aside for reuse and removing unserviceable material in low laying area complete all as specified and as directed.

M&L for squared rubble walling jodhpur type, brought upto course,well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

-ditto- all as per above item but, except stone complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store as directed by Engineer incharge.

S&F of factory made steel ventilator (one or more leaf) with top hung shutter with friction hinges, steel peg stay, including one shop coat of zinc chromate primer, complete all as specified and directed. Note:- Guard bar/ grill shall be measured and paid separately under respective item of Sch 'A'.

Mild steel round bars welded to steel windows or ventilators as in guard bars framed or unframed complete all as specified & as directed by Engineer incharge. Note :- Guard bars shall be factory welded & given one shop coat of red oxide or zinc chromate primer. Cost of factory welding & Shop coat of primer is deemed to be included in quoted rates.

S&F Sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads or fixed with rubber gasket in squares any size of pane complete all as specified & as directed.

Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint over one priming coat of redoxide zinc chrome coat, complete all as specified and as directed by Engineer incharge.

Preparing previously untreated surfaces of steel work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer incharge.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

M & L for point wiring for One light/fan point controlled by one no, one-way, 5 Amps switch complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed FRLS cable 1100 volt grade, colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed conduit where (including Cutting Chases and maiki+B121ng good the distrubed surfaces ) as required as site, totally concealed in walls / floors or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates all as specified and directed by Engr-in-Charge.

All as per srl item No. 105 above here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed.

S&F Switch piano type, single pole, one way, 15 amps, 230 volts, complete all as specified and directed.

S&F Socket, 3 pin, 5/15 Amp, multipurpose flush type, 230 volts, complete all as specified and directed.

S&F Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.

Supply & fix exhaust fans AC Single phase 230 V of size 450 mm sweep with louver including taking down old fan.

Supply & fix Air Circulator fans 230 volts single phase oscillating 600 mm sweep suitable for wall mounting incl taking down old fan.

S&F LED light fitting 1 X 20/22 watt (4 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed.

S&F bldg security LED Light Luminaire of 40 Watts having IP 66 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with fixing of GI pipe 40 mmdia 1.20 m long,bent to shape including drilling holes,clamps, nuts & bolts & 2 coats of alum paint over a coat of red oxide paint on GI pipe and fixing with wall security light on building wall including clamp/pipe/nuts & cable complete all as directed. Make : Philips/Crompton/G.E/Havells.

S&F LED Flood Light Luminaire of 120 Watts having IP 66 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass fixing with wall complete all as specified and directed.

S&F in replacement of Vertical Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way (Concealed flush to wall), 415 volts with bus bar rating 200 Amps with 100 Amps MCCB as incommer , dust and vermin proof, suitable for incorporation of MCCB’s and MCBs etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Note: MCBs will be measured and paid separately under respective items.

S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 08 way (Concealed flush to wall), 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F in replacement of MCB, C Curve type, 10 kA, 40Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed.

M&L for sub main wiring with 2 run of 4 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates. 2. The two run of 2.5 Sqmm wire and one run of 1.5 Sqmm wire will be measured as one unit.

Supply, laying, testing and commissioning of LT UG cable, XLPE insulated, PVC sheathed, galvanized steel strip armoured electric power cable with stranded aluminium conductor, 1100 volts grade of size 50 sqmm 3.5 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover made of iron plate with handle incl hinged in agnle iron , 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as shown on electrical plate no 3 of SSR, as specified and directed.

Excavation in trenches in hard / dense soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides, complete all as directed.

Supply & laying Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm Complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 10cm after laying of cable in trenches complete all as directed and sand cover to under ground cable complete all as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick, complete all as specified

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified.

S&F of GI pipe of 50 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall including painting with two coats of aluminium paint over a coat of red oxide paint complete all as directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate.

Rajesh Enterprises

M/S gayatri construction company

Bhagwati Construction Company