Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC KUPAKKARATHADATHIL HOUSE VEMPALLY P O | ₹12.0 L | L1 | Accepted-AOC L1 |
| Sl No | Description | Qty | Unit | ADITHYA ENTERPRISES L1 |
|---|---|---|---|---|
| 1.00PALLATTUPADI | ||||
| 1.01 | Supplying ,Fabricating and fixing pump house of size 120x60 cm and height at front side 2.0m and back side 1.80m. Using 16guage MS sheet 25x25x6 mm MS angle and 25x25 mm size GP tube 16g. And a door of size .75m x 1.80m with locking arrangements. Roofing with .35mm thick prepainted GS troffold sheet over 2 nos of 25 x 25 mm size GP tube, purlin of 16g.flooring with suitable size GP tube and aluminum checked sheet andPainting the whole structure with 2 coats of synthetic enamel paint over a coat of zinc chromate yellow primer and fixing the same to the roof of well frimly using sutabie size of anchor bolts etc. complete as directed | 1 | no | 35,000 ₹35,000 Lowest |
| 1.02 | Supplying and installing OPENwell pumpset with ISI mark and specifications with all accessories as per the duty condition confirming to relovent ISI specificaton and mark -Head 170m & discharge 10000 LPH including Oil immersed Star Delta starter 10HP, /8KVAR Power capacitor, Single phase preventor Cable 6 .1.2 sqm, Earthing material, Pressure Guage with siphon and/ Valve, NR Valve , Sluice Valve, Panel board of size 2.5 x 2 feet including volt meter, ammeter, selector switch, 100A MCCB, 300MA ELCB, 63 o Fuse unit 3nos and panel board wiring with cables, Supply & Fixing MS supporting clamps. with Pump set erection charges including welding the column pipes with flanges, bend and fitting valves including the cost of rubber mat, nuts, bolts, labour charge,conveyance charge etc 1,2 Supply and fixing 80 mm GI pipe with all fittings | 10 | hp | 18,600 ₹1,86,000 Lowest |
| 1.03 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 75 mm dia 12.5 kg | 2,044 | m | 225 ₹4,59,900 Lowest |
| 1.04 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 63 mm dia 10 kg | 202 | m | 125 ₹25,250 Lowest |
| 1.05 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 50 mm dia 10 kg | 280 | m | 76 ₹21,280 Lowest |
| 1.06 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 32 mm dia 10 kg | 380 | m | 28 ₹10,640 Lowest |
| 1.07 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil | 13.5 | m3 | 678 ₹9,153 Lowest |
| 1.08 | "Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and including cost of fittings. 75 mm dia | 2,044 | m | 102 ₹2,08,488 Lowest |
| 1.09 | "Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and including cost of fittings. 63 mm dia | 202 | m | 100 ₹20,200 Lowest |
Tender Value
₹12.2 L
EMD Value
₹30,600
Closing Date
4 Mar 2026, 5:00 pmClosed
Regional project Director,Regional project managem
REGIONAL PROJECT DIRECTOR,REGIONAL PROJECT MANAGEMENT UNIT,KRWSA, MATHA ARCADE, THODUPUZHA, IDUKKI - 685584
Rectification Works of 1 no Small Water Supply Schemes Under Package-1 to Parathode GramaPanchayathin Kottayam District
2026_KRWSA_833186_2
KRWSA/IDKI/TEN/WSS/03/25
Open Tender
Civil Works - Water Works
Item Rate
90 days
Parathode Grama Panchayath in Kottayam District
As per tender condition
5 documents required · 5 mandatory
₹2,500
₹30,600
17 Jul 2026
25 Feb 2026
6 Mar 2026
25 Feb 2026
4 Mar 2026
25 Feb 2026
25 Feb 2026 - 4 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1PALLATTUPADI | |||||
| 1.01 | Supplying ,Fabricating and fixing pump house of size 120x60 cm and height at front side 2.0m and back side 1.80m. Using 16guage MS sheet 25x25x6 mm MS angle and 25x25 mm size GP tube 16g. And a door of size .75m x 1.80m with locking arrangements. Roofing with .35mm thick prepainted GS troffold sheet over 2 nos of 25 x 25 mm size GP tube, purlin of 16g.flooring with suitable size GP tube and aluminum checked sheet andPainting the whole structure with 2 coats of synthetic enamel paint over a coat of zinc chromate yellow primer and fixing the same to the roof of well frimly using sutabie size of anchor bolts etc. complete as directed | - | no | 1 | - |
| 1.02 | Supplying and installing OPENwell pumpset with ISI mark and specifications with all accessories as per the duty condition confirming to relovent ISI specificaton and mark -Head 170m & discharge 10000 LPH including Oil immersed Star Delta starter 10HP, /8KVAR Power capacitor, Single phase preventor Cable 6 .1.2 sqm, Earthing material, Pressure Guage with siphon and/ Valve, NR Valve , Sluice Valve, Panel board of size 2.5 x 2 feet including volt meter, ammeter, selector switch, 100A MCCB, 300MA ELCB, 63 o Fuse unit 3nos and panel board wiring with cables, Supply & Fixing MS supporting clamps. with Pump set erection charges including welding the column pipes with flanges, bend and fitting valves including the cost of rubber mat, nuts, bolts, labour charge,conveyance charge etc 1,2 Supply and fixing 80 mm GI pipe with all fittings | - | hp | 1 | - |
| 1.03 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 75 mm dia 12.5 kg | - | m | 1 | - |
| 1.04 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 63 mm dia 10 kg | - | m | - | - |
| 1.05 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 50 mm dia 10 kg | - | m | 1 | - |
| 1.06 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 32 mm dia 10 kg | - | m | - | - |
| 1.07 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil | - | m3 | - | - |
| 1.08 | "Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and including cost of fittings. 75 mm dia | - | m | - | - |
| 1.09 | "Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and including cost of fittings. 63 mm dia | - | m | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1416712.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.74 MB
NITPTD1.pdf
Tender Documents • 1.91 MB
BOQ_1416712.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .