REPAIR AND PAINTING TO ALL TYPES OF STEEL FURNITURE SUCH AS ALMIRAH STEEL, LOCKER STEEL CHAIR CB STEEL AND CHARPOY DOUBLE BUNK ETC AT INS VALSURA JAMNAGAR

Amount

Taking out / Dismantling of worn out / Damaged / defective parts / fittings components of various types of steel furniture items carefully without disturbing the adjoining parts and replacing the same with new parts / fittings after necessary cutting and made to size and shape including tightening the joints, placing everypart in-tact and finally painting the entire steel surface with two coats of first quality synthetic enamel paint over a coat of zinc chorome primer polishing the disturbed wooden surface with two or more coats of french polishing until high glossy finish is obtained & fixed in same poition as per drg as under:-

1.00 Almirah Large Steel: FD-1031/67(M)/1032 Removing old unservicable 6 Liver Lock and S & F new 6 Liver Lock with Duplicate Key as shown in drg.

Removing old unservicable handle and S & F new handle 150mm long as shown in drg.

Removing old unservicable hings and S & F new hings as shown in drg.

Removing old unservicable Leg and S & F new Leg of Almirah Large Steel as shown in drg.

Removing of unservicable shelves and supply and fix new shelves all as shown in drg.

Removing old unservicable Locking assembly with iron plate & 02 rods 10mm & lock cover & S/F new locking assembly set as per drg.

Refixing loose shelves with spot welding of broken joints not exceeding 25mm in length.

Removing unserviceable existing door shutter of almirah large with shelves steel made out of PBI sheet 1mm thick complete as shown in drg.

2.00 Almirah Small Steel & Almirah Med Steel: FD-1031/67(M)/1032 Removing old unservicable 6 Liver Lock with S & F new 6 Liver Lock with Duplicate Key as shown in drg.

Removing old unservicable handle with S & F new handle 150mm long as shown in drg.

Removing old unservicable hings with S & F new hings as shown in drg.

Removing old unservicable Leg with S & F new Leg of Almirah Small Steel as shown in drg.

Removing old unservicable Locking assembly with iron plate & 02 rods 10mm & lock cover & S/F new locking assembly set complete of Almirah Small Steel as per drg.

Refixing loose shelves with spot welding of broken joints nut exceeding 25mm in length.

S&F new shelves made out of 1 mm thick PBI sheet as per existing of size 650 mm of almirah medium with shelves complete all as per drg.

Removing unserviceable existing door shutter of almirah med steel made out of 1 mm thick PBI sheet complete all as per drg.

3.00 Almirah large 1/2H x 1/2S steel: FD-1033 Removing old unservicable 6 Liver Lock with S & F new 6 Liver Lock with Duplicate Key as shown in drg.

Removing old unservicable handle with S & F new handle 150mm long as shown in drg.

Removing old unservicable hinges with S & F new hinges as shown in drg.

Removing old unservicable Leg with S & F new Leg of Almirah Large 1/2H & 1/2S Steel as shown in drg.

Removing of unservicable shelves of Almirah Large Steel 1/2H & 1/2S and supply and fix new shelves of Almirah Large Steel 1/2H & 1/2S all as shown in drg.

Removing old unservicable Locking assembly with iron plate & 02 rods 10mm & lock cover & S/F new locking assembly set complete of Almirah Large Steel 1/2H & 1/2S as per drg.

Removing of loose shelves & refixing with suitable iron cleats 25mm width 04 Nos for each shelves with nut and bolts all as shown in drg.

Removing unserviceable existing door shutter of Almirah Large Steel 1/2H & 1/2Se with shelves steel made out of PBI sheet 1mm thick as shown in drg.

4.00 Almirah med steel ½ H X ½ S: FD-1034 Removing old unservicable 6 Liver Lock with S & F new 6 Liver Lock with Duplicate Key as shown in drg.

Removing old unservicable handle with S & F new handle 150mm long as shown in drg.

Removing old unservicable hings with S & F new hings as shown in drg.

Removing old unservicable Leg with S & F new Leg of Almirah Small Steel as shown in drg.

Removing of unservicable shelves of Almirah Small Steel and supply and fix new shelves of Almirah Small Steel all as shown in drg.

Removing old unservicable Locking assembly with iron plate & 02 rods 10mm & lock cover & S/F new locking assembly set complete of Almirah Small Steel as per drg.

Refixing loose shelves with spot welding of broken joints nut exceeding 25 mm in length.

Removing unserviceable existing door shutter of almirah med steel made out of 1 mm thick PBI sheet complete all as per drg.

5.00 Recordex metal Book case having separate compartments with shutter type glass 66"x33"x12": FD-90M Removing unserviceable glass from shutters & Supplying and fixing new sheet glass as shown in drg.

Removing unserviceable handle & Supplying and fixing new chromium plated handle 100 mm long as shown on drawing.

Removing the loose shutters completely and refixing with iron cleat stoppers of suitable size all as per existing complete all as shown in drg.

Removing unserviceable locks & supplying and fixing new locks 75 mm as per existing with duplicate key as shown on drawing.

6.00 Chairs writing MAP: FD No-FD/E6/MAP/12 Removing of existing unserviceable seat ply including cushion foam and tapestry of chair writing MAP S&F with new seat ply including cushion form and tapestry as shown in drg.

Removing of existing unserviceable back ply including cushion foam and tapestry of chair writing MAP S&F with new back as shown in drg.

Removing of existing unserviceable handle of chair writing MAP S&F with new handle as shown in drg.

Rejoining the base of stiffner with spot welding of broken joints not exceeding 25mm in length.

Removingunservicable PVC beading from seat and back of existing chair writing and S&F and new PVC beading in seat and back of chair writing as per drg.

Removingunservicable PVC shoe and S&F new PVC shoe as per drg.

7.00 Chairs Verandah: FD-256, 359 Removing of worn out legs of chair verandah of existing size 19mm MS pipe 18 gauge duly welded and painted as per existing size on drg and directed.

Removing of worn-out arms of chair verandah of existing size duly welded and painted as per existing size on drg and directed.

Removing of unserviceable PVC shoe Chair verandah S&F with new PVC shoes as per existing size on drg and directed.

Removing ofunservicable canning of seat of chair verandha and recanning of seat of chair verandha with ne cane as per drg.

Removing ofunservicable canning of back of chair verandha and recanning of back of chair verandha with ne cane as per drg.

8.00 Chair CB Steel With Arms: FD-75(M) Removing oldunservicable Seat of Chair CB Steel with Arms & Supply and Fix new seat frame including cane work as per drg.

Removing oldunservicable Back of Chair CB Steel with Arms & Supply and Fix new back frame including cane workas per drg.

Removing of damage MS flat cleat 25x3 mm for Chair CB Steel with Arms and S & F new MS flat cleat 25x3mm duly welded and painted with black paint as per drg.

Removing old unservicable old Handle of Chair CB Steel with S&F new handle as per drg.

Removing old unservicable Cap with S & F new cap as per drg.

Removing old unservicable shoes with S & F new shoes as per drg.

9.00 Chair CB Steel With/out Arms Arms: FD-75(M) Removing oldunservicable Seat of Chair CB Steel with Arms & Supply and Fix new seat frame including cane work as per drg.

Removing oldunservicable Back of Chair CB Steel with Arms & Supply and Fix new back frame including cane workas per drg.

Removing of damage MS flat cleat 25x3 mm for Chair CB Steel with/out Arms and S & F new MS flat cleat 25x3mm duly welded and painted with black paint as per drg.

Removing old unservicable Cap with S & F new cap as per drg.

Removing old unservicable shoes with S & F new shoes as per drg.

10.00 Desk 1800x530x800 mm: FD-107 S&F plastic laminated sheet 1mm thick, teak finish of size 1800x530 mm on the top of the desk with glue including preparing the surface by scrapping and filling holes / depressions properly complete all as specified.

S&F plastic laminated sheet 1mm thick, teak finish of size 1800x200 mm on the front side of the desk with glue including preparing the surface by scrapping and filling holes / depressions properly complete all as specified.

S&F plastic laminated sheet 1mm thick, teak finish of size 200x535x185 mm on the sides of the desk with glue including preparing the surface by scrapping and filling holes / depressions properly complete all as specified.

Removing worn out plywood & Supplying and fixing 12 mm thick BWR plywood, one side decorative finish and other side plain, exterior grade of size 1800x200 mm on the front side of the desk complete all as specified.

Removing worn out plywood & Supplying and fixing 18 mm thick commercial plywood, one side decorative finish and other side plain, exterior grade of size 200x535x185 mm on the sides of the desk complete all as specified.

M&L for Preparation of surface of steel tubular frame and applying one coat of synthetic enameled paint silver grey colour and two coats of French polish on the wooden surfaces of the desk including preparation complete all as specified.

11.00 Desk 4' x 6': FD-107 Removing of worn-out existing desk frame of desk and replacement of new frame with 18mm thick particle board with laminated sheet complete all as specified.

Removing of worn-out 20mm dia tube MS pipe with new 20mm tube leg duly welded complete all as specified.

Replacement of unserviceable worn-out rubber shoe of desk with new rubber shoe as per existing complete all as specified and as directed.

Replacement of unserviceable worn-out stiffener 20m dia with new 20mm dia MS tube as per existing complete all as specified and as directed.

M&L preparing of surface of steel tubular frame and applying one coat of synthetic enameled paint silver grey colour and two coats of French polish on the wooden surfaces of the desk complete all as specified.

12.00 Desk cum bench for two persons: GE (I) N SK 29 of 2000: GE (I) N SK 29 of 2000 Removing existing back rest of desk & Supplying and fixing new back rest of 18 mm thick prelaminated particle board, one side decorative laminated finish and other side plain, exterior grade of size 1200x300 mm with 4 mm thick Teak wood beading duly French polished complete all as specified.

Removing existing seat of desk & Supplying and fixing new seat of desk of 18 mm thick prelaminated particle board, one side decorative laminated finish and other side plain, exterior grade of size 1200x530 mm with 4 mm thick Teak wood beading duly French polished complete all as specified.

Removing existing worn out desk and supply and fixing new Desk of 18mm thick prelaminated particle board one side decorative laminated finish and other side plain exterior grade of size 900x300mm with teakwood beading of 4mm thick duly French polished complete all as specified.

Removing existing desk top of desk & Supplying and fixing new top of desk of 18 mm thick prelaminated particle board, one side decorative laminated finish and other side plain, exterior grade of size 1200x400 mm with 4 mm thick Teak wood beading duly French polished complete all as specified.

Repairs / strengthening the worn out frame by providing 300 mm long MS Pipe and clamps made of 3 mm thick MS flat by welding including bending complete all as specified.

M&L applying one coat of synthetic enameled paint black colour including preparation of surfaces complete all as specified.

13.00 Table Office Officer Steel: FD-1003, 84(M) Removing unservicable Lock with S&F new Lock as per Drg.

Removing unservicable drawer with S&Fnew drawer as per Drg.

Removing of unservicable TOP with S&F new TOP as per drg.

Removing of unservicable Rubber Shoe with S&F new Rubber Shoe as per drg.

Removing and replacement of unserviceable legs and S&F new legs made out of 25mm dia MS 1.6mm wall thickness as shown in drg complete all as specified.

Removing and replacement of unserviceable stiffener and S&F new stiffener made out of 25mm dia MS 1.6mm wall thickness as shown in drg complete all as specified.

Welding the joints of legs / square tube including painting the welded parts to match with existing as shown in drgs.

14.00 Table Office Clk Steel & Table Typist Steel: FD-1004, 84(M) Removing unservicable Lock with S&F New Lock as per Drg.

Removing unservicable drawer with S&F New drawer as per Drg.

Removing of unservicable TOP with S&F New TOP as per drg.

Removing of unservicable Rubber Shoe with S&F New Rubber Shoe as per drg.

Welding the joints of legs / square tube including painting the welded partsto match with existing.

15.00 Table computer: TP, FD/E6/MAP/03 Removing top of table computer and S&F 900x600 mm with 18 mm thick pre-laminated particle board as per existing with pressed plastic beading all round edge of table.

Removing vertical of table computer and S&F 650 x 150 mm with 18 mm thick pre-laminated particle board as per drg.

Removing unservicable Key Board Tray including telescopic channel and S&F new Key Board tray with telescopic channels as per drg.

Removing unservicable drawer including telescopic channel and S&F new drawer with telescopic channels as per drg.

Removing unservicable pull out tray including telescopic channel and S&F new pull out tray with telescopic channels as per drg.

Removing unservicable shelf size 450x230mm and S&F new shelf size 450x230mm as per drg.

16.00 Tepoy Verandah: FD-255 Removing of unservicable TOP with S&F New TOP as per drg.

Removing of unservicable Rubber Shoe with S&F New Rubber Shoe as per drg.

Taking out unserviceable MS flat iron supports and providing new flat iron support 25x3 mm, to required length and shape complete all as specified.

Welding the joints of legs /round tube including painting the welded parts to match with existing.

17.00 Locker BED Side Steel: FD-1029, 257 Removing of unservicable Hasp & Staple with S&F New Hasp and Staple as per drg.

Removing of unservicable Handle with S&F New Handle as per drg.

Removing of unservicable Leg with S&F New Leg as per drg.

Removing of unservicable shelf with S&F new shelf as per drg.

Removing unserviceable existing door shutter of locker steel made out of 1mm thick PBI sheet complete all as specified.

Removing worn out unserviceable aluminium rod 20 mm dia and S&F new aluminium rod as per existing all as shown on drawing complete all as specified.

18.00 Locker Industrial Type with 6 lockers (1985x920x485mm): FD-127(M) Removing of unservicable Handle with S&F New Handle as per drg.

Removing of unservicable Base Leg with S&F New BaseLeg as per drg.

Removing of unservicable Lock with S & F new Lock as per drg.

19.00 Chair School with Hand Board: FD/E6/MAP/05 Removing of board top openable with PVC edging and screwed to 25mm dia hollow steel pipe and S & F new board top openable with PVC edging and screwed to 25mm dia hollow steel pipe as per Drg.

Removing of unservicable one piece Seat and Back and S&F New one piece seat and back as per drg.

20.00 Table Dinning Ors: FD-165(M) Removing of unservicable Table TOP with Aluminium sheet and S&F New Table TOP with Aluminium sheet as per Drg.

Removing of unservicable Rubber Shoe and Supply and fix new rubber shoe as per drg.

Taking out unserviceable long rail and S&F new rail as per drg.

Taking out unserviceable short rail and providing new short rail and shown on drg.

Taking out unserviceable stiffener and providing new stiffener of MS square pipe 25x25mm, 18 gauge to required length and shape, framed and welded to match existing frame complete all as specified.

21.00 Table dining steel 900x900 mm: FD-1009 Removing unserviceable table top & Supplying and fixing new table top, 18 mm thick prelaminated particle board, one side decorative lamination and other side balancing white lamination, Medium density, exterior grade with 4 mm thick Teak wood beading duly French polished complete all as specified.

Provision of 300 mm long MS clamps made of 3 mm thick MS flat by welding including bending complete all as specified.

Taking down and S&F new PVC hard shoes to the legs of the table complete all as specified.

22.00 Table Steel with laminated sheet 5' x 3' x 21/2': TP Removing unserviceable table top & Supplying and fixing new table top, 18 mm thick prelaminated particle board, one side decorative lamination and other side balancing white lamination, Medium density, exterior grade with 4 mm thick Teak wood beading duly French polished complete all as specified.

Provision of 300 mm long MS clamps made of 3 mm thick MS flat by welding including bending complete all as specified.

Taking down and S&F new PVC hard shoes to the legs of the table complete all as specified.

23.00 Rack adjustable steel shelving open type: FD - 106, 129, 1038, 1019 Removing of denting of shelves wherever required in rack steel complete all as specified.

Removing worn out shelves & supplying and fixing new shelves made out of 20 gauge MS Sheets as per existing complete all as specified.

Replacement of angle iron of various type of Rack steel as per existing size as required.

24.00 Book Case steel: FD - 1028, 90(M) Removing of denting of shelves wherever required in rack steel complete all as specified.

Removing worn out shutter & supplying and fixing new shutter made out of MS Sheets as per existing and to made functional for opening by swing up the shutter which can be rolled in complete all as specified.

Replacement of unserviceable shelve of book case steel of existing size with new shelve as shown and specified in drg.

Removing of unserviceable locks and S&F new lock ISI Marked 75mm as per existing with duplicate keys complete all as specified.

Replacement of unserviceable broken glass of book case steel with new glass of existing size as shown in drg complete all as specified.

Removing of unserviceable handles 100mm long S&F new handle ISI Marked as per existing complete all as shown in drg and as specified.

25.00 Book shelf open large steel: FD-69M Removing of denting of shelves wherever required in rack steel complete all as specified.

Removing worn-out shelves & supplying and fixing new shelves made out of 20 gauge MS Sheets as per existing complete all as specified.

M&L for one coat of synthetic enamel paint to the frame of table including preparing the surfaces and removing denting wherever required complete all as specified.

Repalcement of angle iron of various type of rack steel as per existing size as required.

26.00 Book shelf open small steel: FD - 69M Removing of denting of shelves wherever required in rack steel complete all as specified.

Removing worn out shelves & supplying and fixing new shelves made out of 20 gauge MS Sheets as per existing complete all as specified.

Replacement of angle iron of various type of Rack steel as per existing size as required.

27.00 Chair Revolving: TP Repairing of unserviceable old seat and supplying and fixing new seat with plywood and cushioned and tapestry cloth as shown on drgs as per existing and as directed.

Repairing of unserviceable old cushion padded back and supply & fixing of new cushion padded back with tapestry cloth as shown on drgs as per existing and as directed.

Removing of old broken handle and supply and fitting of new handles as per existing and as directed.

Removing of unserviceable cluster wheel and supplying and fixing of new cluster wheel as per existing size as shown on drgs and as directed.

Removing of unserviceable spindle steel for vacuum of chair and supplying and fixing new spindle steel as per existing as shown on drg and as directed.

Removing unserviceable/broken Plastic frame base with wheel of chair revolving and supply and fixing new steel base with wheel as per existing and as shown on drgs and as directed.

Removing unserviceable/broken steel frame base with wheel of chair revolving and supply and fixing new steel base with wheel as per existing and as shown on drgs and as directed.

28.00 Chair Computer Revolving with Arms: FD/E6/MAP/01 Removing unservicable star Base and S&F New star base as per drg.

Removing unservicable castor wheel and S&F New castor wheel as per drg.

Removing unservicable hydrolic gas pump and S&F new hydrolic gas pump as per drg.

Removing unservicable handle and S&F new handle as per drg.

Removing old unservicable upholstry of seat with cushion foam and S & F new good quality of upholstry of seat with cushion foam matching with existing as shown in drg.

Removing old unservicable upholstry of Back with cushion foam andS & F new good quality of upholstry of Back with cushion foam matching with existing as shown in drg.

29.00 Charpoy Double Bunk hard top comprising the following items: FD-112(M) Removing existing unserviceable plywood top from the Charpoy Double bunk and supplying & fixing new 12 mm thick plywood ISI Marked BWR type (one double bunk = two nos ply) as per existing and including welding of broken frame and nut and bolt to fixing as and when required to restructure the frame properly and applying one coat of synthetic enamel paint black to the frame of charpoy complete as directed.

M&L for spot welding of broken joints etc. Various steel furniture not exceeding 2.5cm in length including scraping, preparing surace of welded portion by grinding and buffing to make fit for painting and applying one coats of synthetic enamel paint over a coat of red oxide primer on welded portion to match with existing painting. Drg Nos.: FD-67,1031,1032, FD-106(M)/1038, FD-85, FD-106, FD-129(M)/1038, FD-75(M) 84(M), 1003,1004,75,258,77(M),1029, 257, 255, 208,FD/E6/MAP/02(R), FD/E6/MAP/05, FD-165(M), FD-1007, FD-1008, FD-1009, FD-77/1027, FD-90(M)/1028

Preparing of old painted surfaces of Almirah Large Steel and touching with zinc chromate primer where necessary preparing surfaces and apply one coat of first quality synthetic enamel paint / powder coated paint as where required as per drg. Drg No. FD-1031/67(M)

All same as per item No 31.00 here-in-above but Almirah Small/Medium Steel. Drg No. FD-1032/67(M)

All same as per item No 31.00 here-in-above but Almirah Large with Glass Door Steel. Drg No. FD-104(M)

All same as per item No 31.00 here-in-above but Almirah Larg Steel 1/2 Hx1/2 S. Drg No. FD-1033

All same as per item No 31.00 here-in-above but Almirah Small/Med Steel 1/2 Hx1/2 S. Drg No. FD-1034

All same as per item No 31.00 here-in-above but Locker Bed Side Steel. Drg No. FD-1029/76(M)

All same as per item No 31.00 here-in-above but Locker Industrial Type with 6 lockers (1985x920x485mm). Drg No. FD-127(M)

All same as per item No 31.00 here-in-above but Chair School with Hand Board. Drg No. FD/E6/MAP/05

All same as per item No 31.00 here-in-above but Chair CB Steel With Arms. Drg No. FD-75(M)

All same as per item No 31.00 here-in-above but Charpoy IP Hard Top. Drg No. FD/MAP/E6/07

All same as per item No 31.00 here-in-above but Table Office Officer Steel. Drg No. FD-1003, 84(M)

All same as per item No 31.00 here-in-above but Table Office Clk Steel . Drg No. FD-1004, 84(M)

All same as per item No 31.00 here-in-above but Teapoy Verandah. Drg No. FD-255

All same as per item No 31.00 here-in-above but Table Dinning Ors Steel. Drg No. FD-165(M)

All same as per item No 31.00 here-in-above but Table 3'x2' without drawer Steel. Drg No. FD-1007

All same as per item No 31.00 here-in-above but Table 3'x2' with Drawer Steel. Drg No. FD-1008

All same as per item No 31.00 here-in-above but Table 3'x3' steel. Drg No. FD-1009

All same as per item No 31.00 here-in-above but Rack Adjustable six Tier. Drg No. FD-106(M)

All same as per item No 31.00 here-in-above but Rack P/Hole all types. Drg No. FD-85/106

All same as per item No 31.00 here-in-above but Rack Adjustable Steel 1830x760x1905mm. Drg No. FD-1106(M)/1038

All same as per item No 31.00 here-in-above but Book Case Steel . Drg No. FD-90(M)/1028

All same as per item No 31.00 here-in-above but Chair verandah. Drg No. FD-359

All same as per item No 31.00 here-in-above but Stool steel 2' high. Drg No. FD-81M, FD-02

All same as per item No 31.00 here-in-above but Bed Hard (Map). Drg No. FD/E6/MAP/08R

All same as per item No 31.00 here-in-above but Book Shelf open Small Steel. Drg No. FD-69M

All same as per item No 31.00 here-in-above but Chair CB Steel w/o Arms. Drg No. DF-75M

All same as per item No 31.00 here-in-above but Ladder for loft. Drg No. FD-238

All same as per item No 31.00 here-in-above but Charpoy double bunk. Drg No. FD-112M/TP

All same as per item No 31.00 here-in-above but Cot Steel tubular single tire. Drg No. TP

All same as per item No 31.00 here-in-above but Steel table with Plastic laminated Sheet 5'x3'x21/2. Drg No. FD-84

All same as per item No 31.00 here-in-above but Recordex metal book case. Drg No. FD-90M

All same as per item No 31.00 here-in-above but Rack Shoe Steel. Drg No. FD/E6/MAP/02R Note : The repair works shall be executed where the furniture exist i.e where the furniture are lying it might be in different User Units or GE (I) Navy Jamnagar BSO's Furniture Yard as directed by Engineer-in-Charge.The quoted rate is deemed to be inclusive for the same no extra shall be entertained for working in various places.

motwani and associate

Raj brothers

SIBS CONTRACTOR