SPECIAL REPAIRS TO CERTAIN OMQs AND SMQs AT AFA HYDERABAD

Per Pair

Demolition of RCC Chimney, lintels, chajja, slab cover, beams of any description and height upto 3m to 5m, not other wise specically provided and in simillar works etc complete all as specified and as directed

Each Set

M&L Cement concrete type B-1 1:2:4 (20mm grades aggregate) in roof padding concerte with water proofing compound as per manufacturers instructions etc complete all as specified and as directed. (WPC will be measured & paid separately under relevant Item)

M&L for rendering 10mm thick in cm 1 : 3 mixed with water proofing compound as per manufacturers instructions on concrete surfaces when PCC on roof surfaces is still green including finished even and smooth etc for easly laying of APP membrane on roof, complete all as directed (WPC will be measured & paid separately under relevant Item).

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Cleaning the roof surfaces and applying oil bound bitumen primer @0.20 Kg per Sqm providing and laying 4mm thick APP modified water proofing membrane weight not less than 4 Kg per Sqm reinforced with non woven polyster mat weight not less 160 gm per Sqm having softening point not less than 140 Degree centigrade, lengitudinal tensile strength not less than 800N per 5 cm teasing strenght of 180N with minimum of 10 cm side laps and 15 cm end laps by application of torch. Applying a coat of blown grade hot bitumen over the membrane @ 1.20 kg/sqm as per manufacturer instructions etc complete all as specified and as directed.

M & L Cement concrete type B-0 1:2:4 (12.5mm grades aggregate) in haunching concrete etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 20mm thick for laying roof tiles in CM (1:6) etc complete all as specified and as directed.

S&F cement concrete tiles 20cm X 20cm X 20mm thick machine pressed, set jointed with grey cement and no pigment and pointed in neat cement slurry in floors, and cut and polished complete all as specified and as directed.

M&L for applying one coat of solar reflective bituminous Aluminium paint over a surface of APP water proofing membrane @ 0.1 Kg/Sqm etc complete all as specified and as directed.

Taking up or down 15mm bore of pipe steel tubing and connections, including for refixing or removal etc complete all as specified and as directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including for refixing or removal etc complete all as specified and as directed.

S&F 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.

S&F 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.

Cutting chases for concealed water tubing in Brick or stone walls or concrete surfaces and making good to facings where required and pointing in cement mortar 1:3, cutting not exc 10 cm girth etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1 : 3 on fair faces of brick or concrete surfaces mixed with water proofing compound as per manufacturers instructions finished even and smooth in sunken portion without using extra cement etc complete as specified and as directed. (WPC will be measured & paid separately under relevant Item)

Material and labour for Applying a uniform coat of blown grade bitumen 85 / 25 @ 1.20 Kg per Sqm conforming to IS 702 over a coat of bituminous primer @ 0.70 kg per sqm and over that laying water proofing 3mm thick APP based polymeric membrane of weight not less than 3 Kg per Sqm reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on prepared surface by forced application as per manufacturers instructions in sunken floor etc complete all as specified and as directed.

M&L for 25mm thick PCC type B-0. 1:2:4 (12.5mm graded aggregate) as in sub base of floor etc complete all as specified and as directed.

Supply only intergral water proofing compound as per manufacturers instructions complete all as specified and as directed.

Dismantling floor hearth or existing wall tiling incl cement mortar bedding (but not backing) including removal of debris from the site, etc complete all as specified and as directed.

M&L for Screed bed or bedding layer of cement mortar (1:6) 10mm thick for laying floor finishes complete all as specified and as directed.

M & L for Joint free non - skid coloured ceramic tiles, 10 mm thick (square or rectangular) area of each tiles exceeding 0.16 Sqm but not exceeding 0.20 sqm as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1 : 4 on brick or concrete surfaces to receive as backing of wall tiling etc complete all as specified and as directed.

Demolition of brick/stone masonry built in cement mortar of any description etc complete all as specified and as directed.

B/R PORTION : Demolition of cement concrete or surkhi filling of any description and in any position not otherwise specifically provided for Roof treatment and in sunken treatment etc complete all as specified and as directed.

M&L for Roughening surfaces of old concrete floor by picking, hacking for keys, sweeping clean and washing down with water to remove dust, etc. for preparation for tiling complete all as specified and as directed.

M&L for spreading of Cera Bond Chemical at 6.00 Kg per Sqm for fixing floor tiles complete all as specified and as directed.

M & L for Vitrified ceramic tiles any shade / double charged / ultracharged, 10 mm thick (square or rectangular) area of each tiles not less than 0.72 sqm as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and as directed.

S&F factory made solid panel PVC moulded door shutter with particle board core, 28 to 30mm thick (styles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheets on back face, complete all as specified and as directed. Make : Rajshree, Sintex.

M&L for Joint free Glazed colour tiles of premium quality 8 to 9 mm thick, (square / rectangular), area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the colour tiles complete all as specified and as directed.

All as per Item No.38 above but in vertical surfaces of skirtings etc complete all as specified and as directed.

S&F of 18 to 20 mm thick Granite/Quartz work (table rubbed and polished) black coloured,for wall lining (veneering to wall ) 12mm thick in cement mortar (1:3) and pointing withwhite cement (1:2) using marbel dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.

M&L rounding to edges of stone slabs one edge, in cooking plotforms complete all as specified and as directed.

M & L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work/stone work surfaces at any height with neccesary scafoldings, finished even smooth without using extra cement complete all as specified and as directed.

M & L for External rendering 15 mm thick cement plaster in two layers 5mm thick in CM 1:4 with WPC/liquid as per manufacturers instruction over 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings, finished even smooth without using extra cement complete all as specified and as directed. (WPC will be measured & paid separately under relevant Item)

M & L for Rendering 5 mm thick in cement mortar 1:4 on ceilings & soffits of stair case waist slab, beam bottom, etc, of concrete surfaces at any height with neccesary scafoldings, finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of newly plastered internal wall surface and applying two coats of distemper oil emulsion over a coat of Alkali resistant priming paint over the coat of 3mm thick wall care putty etc complete all as specified and as directed.

Preparing of newly plastered external wall surfaces and applying two coats of cement based paint over a coat of cement primer, etc complete all as specified and as directed.

Preparing of newly plastered surfaces of ceiling and applying three coats white wash etc complete all as specified and as directed.

S&F in repairs of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and as directed.

S&F in repairs of stop valves(concealed type) 15mm dia CP fancy type with capstan head screwed down high pressure screwed both ends for iron pipe or for unions, of 15mm bore etc complete all as specified and as directed.

S&F in repairs overhead rain shower of stainless steel of size 300 x 300 mm of make: Cera Cat. No. F7010109SS or equivalent complete all as specified and as directed.

S&F in repairs overhead shower arm 230 mm long with wall flange of make : Cera Cat. No. F7040103 or equivalent complete all as specified and as directed.

S&F in repairs corner glass shelf with 2 racks of Make : Cera (Oceana range) Cat. No. F5005201 or equivalent complete all as specified and as directed.

S&F in repairs 2-Way bib cock with side handle, wall flange and aerator of make: Cera (winslet) Cat. No. F1099161 or equivalent complete all as specified and as directed.

S&F in repairs angle cock with wall flange of Make : Cera (winslet) Cat. No. F1099201 or equivalent complete all as specified and as directed.

S&F in repair 10 lts PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets for fluslhing cistern and connections to pipes including long bends etc complete all as specified and as directed.

S&F in repairs of PVC waste pipe 32 mm bore, 900 mm long etc complete all as specified and as directed.

S&F High density polyethylene pipes 32mm(HDPE) with collar of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick s

Supply and fix in repairs stainless steel sink with drain board of overall size 915mmx460mm bowl size 410mmx330mmx160mm with draining board made out of stainless steel 1 mm thick for kitchen with plugs, washers and waste pipe including cast iron cantilever brackets and connecting to union / pipe complete all as specified and as directed.

Supply and fix in repairs Brass CP fancy tubular towel rail of 20 mm dia, D type 600 mm long between flanges, including brackets complete all as specified and as directed.

S&F Dish/plate Display Rack Stainless Steel Hand Made - Wall Hanging (Approximte size 600mm x 900mm x 250mm) complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to Store complete all as specified and as directed (measured overall as fixed along the centre line over fitting and accessories)

Supply and fix 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fxed to walls or in floors, etc complete all as specified and as directed.

Supply and fix 110 mm dia bore PVC (SWR) bends, any radius, etc complete all as specified and as directed.

Supply and fix 75 mm dia bore PVC (SWR) bends, any radius with oval access door, etc complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal with access door, etc complete all as specified and as directed.

Supply and fix in repairs Salt glazed stoneware gully trap, P type 150x100mmmm, including taking down existing of any description etc complete all as specified and as directed.

M & L for two coat of oil bound distemper on old decorated surfaces on ceiling, including preparation of surfaces by washing, rubbing down and stopping of distempered surfaces complete all as specified and as directed.

M&L for complete removal of the existing old treatment on walls and applying two coat of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty, including preparation of surfaces complete all as specified and as directed.

M&L for complete removal of existing painting on old plastered or unplastered surfaces on walls including cornices by applying two coats of cement based paint over a coat of cement primer, colour complete all as specified and as directed.

M&L for complete removal of existing painting on old plastered or concrete facea/cornice surfaces and applying two coat of santex matt painting over a coat of primert etc complete all as specified and as directed.

M & L for preparing old painted wood and wood based surfaces of any description, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparing old painted steel and iron Surfaces, plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint, not otherwise described applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling water tanks capacity 1000 ltrs and removing to stores complete all as specified and as directed.

S&F Rotational moulded PVC water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) ,three layered, hoisted and fixed in position including out let and inlet connections of capacity 500 litres, all as specified in SSR part–I complete all as specified and as directed.

S&F Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) ,three layered, hoisted and fixed in position including out let and inlet connections including dismantling existing water tanks of capacity 500 litres, all as specified in SSR part–I complete all as specified and as directed.

Supply and fix 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weigh 210 gms) complete all as specified and as directed.

S&F Stainless steel tubular curtain rails 20mm dia etc complete all as specified and as directed.

S&F 20mm dia fancy type brass chromium plated curtain end finials, etc complete all as specified and as directed.

S&F stainless steel brackets suitable for 20mm dia curtain rails, etc complete all as specified and as directed.

Taking down chowkats or steel window / door frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or steel window / door frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description of area exc 1.0 sqm but n exc 2 sqm ach complete all as specified and as directed.

S & F Pressed steel frames 105x60mm size, for doors with single rebates including necessary fixing lugs, lock strick plate, etc complete all as specified and as directed.

S & F Pressed steel frames 125x60mm size, for doors with double rebates including necessary fixing lugs, lock strick plate, etc complete all as specified and as directed.

M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in filling of hollow portion of pressed steel frame etc complete all as specified and as directed.

F 30mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

S & F 35mm thick Plain framed, panelled shutter (Partly paneled and partly Gauzed) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and as directed.

Supply and fix 35 mm thick factory made second class hardwood glazed / gauzed and skeleton door shutters , open rebated and prepared to receive glass, gauze, mesh etc with sash bars divided into squares with plain chamfered or rounded mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I Section 8, clause 8.20 and fixed to chowkats complete all as specified and as directed.

S & F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for type of shutters of doors, windows, ventilators, including providing and fixing Handles, tower bolts, hinges / pivots and making provision for supply and fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of aproved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws all complete as per architctural drawigs complete all as specified and as directed.

M&L Joint free Glazed coloured ceramic tiles of digital quality in vertical surface 350x250mmx7-8mm/ 450X300X7-8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Note: Colour of tile will be finalized by Engr-In-Charge.

M & L 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.50 sq.m in each pane complete all as specified and as directed.

M & L 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc. 0.50 sq.m in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and as directed.

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

S&F in repair MS framed work such as in grills and framed guard bars for windows/ventilators with ends of bars shouldered and/or riveted, or forget into spikes etc and similar work conforming to Fe 290, Gde E 165 etc complete all as specified and as directed

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc complete all as specified and as directed.

Taking down shutters of any description exc1 sqm but n exc 2 sqm and refixing the same in same openings after repairing or cutting bottom as per site requirement complete all as specified and as directed.

Supply and fix butt hinges of 100mm size, medium weight cold rolled mild steel and fixed etc complete all as specified and as directed.

Supply and fix butt hinges of 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and as directed.

Supply and fix 150mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.

Supply and fix tower bolt 150mm long, extruded aluminium anodised complete all as specified and as directed.

Supply and fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fix 300mm long mild steel ordinary rat and tail rod pattern springs, including roller and roller plate complete all as specified and as directed.

S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor, etc complete all as specified and as directed.

M & L Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint (ordinary tint ) over a coat of pink primer, complete all as specified and as directed.

Material and labour for preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer on newly treated steel surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level, etc complete all as specified and as directed.

M&L 75 mm thick Cement concrete in Sub base to pavings, type D2 1:4:8 (40 mm graded aggregate) complete all as specified and as directed.

Material and labour 75 mm thick plain cement concrete 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection etc., finished even and smooth without using extra cement complete all as specified and as directed.

M&L for taking down existing pointing of any description including racking out joints, hacking for keys, scrubbing down with water and providing raised pointing to old stone walls surfaces of any description, with necessary scaffoldings, by using cement mortar 1:3 complete all as specified and as directed.

Dismantling boarding, shelves, partitions of any description, fixed in any position with nails, screws, clamps, etc complete all as specified and as directed.

Providing and fixing of 100% Solid WPC ( Wood polymer Composite ) frames single pattam (size 3"x2") comprising of virgin PVC resin, Calcium Carbonate and natural Fibres (Wood Powders/ rice husk/ wheat husk ) and Non-toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner ). Water/ Moisture Proof, Fire Retardant complete all as specified and as directed.

M & L 18 mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin, Calcium Carbonate and natural Fibres (Wood Powders/ rice husk/ wheat husk ) and Non-toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner ). Water/ Moisture Proof, Fire Retardant complete all as specified and as directed.

S&F in repairs wall mixer (3-in-1) with arrangement for both telephonic hand shower and overhead shower with bend pipe of make : Cera (Winslet) Cat. No. F1099403 or equivalent complete all as specified and as directed.

M & L 12 mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin, Calcium Carbonate and natural Fibres (Wood Powders/ rice husk/ wheat husk ) and Non-toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner ). Water/ Moisture Proof, Fire Retardant complete all as specified and as directed.

S&F in repairs 18-19mm dia curtain rod/cloth hanging rod chromium plated including brackets,stay etc complete all as specified and as directed.

S&F Auto concealed Cabinet Hinges, full overlay of size 103 x 64mm etc complete all as specified and as directed.

S&F Fancy 'D' Type Drawer / Cabinet handles of Size 100mm, etc complete all as specified and as directed.

S&F Magnetic catcher with plate, glosy finish for Drawer / Cabinet of Size not less than 50mm, etc complete all as specified and as directed.

Supply and fix tower bolt 100mm long, extruded aluminium anodised complete all as specified and as directed.

Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for

foundation or cesspits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth orgetting out soft/loose soil complete all as specified and as directed.

Demolition and breaking up drain / sewage pipes 150 mm dia, (Salt glazed ware, AC or Reinforced concrete) set in concrete mortar complete all as specified and as directed.

Returning filling in ,including spreading ,levelling,watering and well ramming in layers n exc 25 cm in soft/ loose soil complete all as specified and as directed.

Removing excavated material exc 1.50 KM but n exc 5 KM distance and depositing where directed complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) for concrete bed of 10cm thick, to drain pipes of 150 mm dia,including packing under, and hunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for 150 mm dia pipe (Grade ‘A’ pipe) Salt glazed stone ware drain pipes laid in trenches and jointed in CM 1:3 complete all as specified and as directed.

NUMBER #

Cutting into existing manholes for connecting new drain of 150 mm dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1 / 2 round or 3 / 4 section) in cement concrete 1:2:4 type B-1, smooth finished, and reforming benching as required complete all as specified and as directed.

S&F Hot and Cold Sink Mixer with Regular spout (Winging spout) etc complete all as specified and as directed. Make: Prayag, Cat no: 9360 or Equivalent approved by GE.

S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick channel fixed with steel screws complete all as specified and as directed.

M&L Providing precast cement concrete type B1 1:2:4 ( 20 mm graded aggregate ) in Coocking plateform, landing, cover slabs manholes, chullah hoods , chajjas , water troughs , shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed.

S&F mild steel TMT bar 6mm to 8mm dia, cut to length , bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc complete all as specified and as directed.

One switch socket outlet point 5/6 Amps on independent board.

One Light/E/Fan/Bell etc. point controlled by one switch 5/6 Amps.

E/M PORTION : - Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc complete all as specified and as directed.

S&F in repairs Stainless steel wire (6mm) modular kitchen basket set (6 trolley) with corrosion resistance, durable and seamless glossy finish used in modular kitchen cabinets & drawers complete all as specified and as directed. Make: Steel gold or equivalent approved by GE. Set Content:- a) 21"x20"x4" (Sheet Cutlery) - 1nos b) 21"x20"x4" (Plain Basket) - 2nos c) 21"x20"x6" (Thali Basket) - 1nos d) 21"x20"x8" (Dish / Plate Basket) - 1nos e) 21"x20"x8" (Plain Basket) - 1nos f) 20" Telescopic Channel (Heavy) - 6Sets

Per Load

Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc complete all as specified and as directed. Note for Item Nos 163 to 165 above : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade), ISI marked with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes, Modular White Cover Plates with frames of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified and as directed for the following : Make of cable : Havells/Polycab/Finolex/KEI Make of Conduit : Precision/Finolex/Polycab/Modi

M & L for sub-main wiring alongwith earth wire of size (2 x 6.0) sq. mm + (1 x 6.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc complete all as specified and as directed. Make of cable : Havells / Polycab / Finolex.

S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

S & F Modular switch, two way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW062, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

One C/fan etc. point controlled by one switch 5/6 Amps.

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt with Indicator complete all as specif

ied and as directed. Cat No : ACVSXXW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab Note for Item Nos 172 to 176 : Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned.

S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and as directed. Make: Havells/Legrand/Anchor

S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit complete all as specified and as directed. Make : LUKER, Cat No LT510P or techno-commercially equiv in Havells/Jaguar/Philips.

S&F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit complete all as specified and as directed. Make : LUKER, Cat No LT520P or techno-commercially equiv in Havells/Jaguar/Philips.

S&F LED Bulkhead light fitting 20 W or next higher rating, CRI > 80, CT>5700 K (White), integrated type, with high efficiency electronic driver complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Cat No : LBKOVD20 of make Luker or techno-commercially equiv in Havells/Jaguar/Philips.

Description all as per Item No 166 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete all as specified and as directed.

All as per Item No.36 above but in vertical surfaces of skirtings etc complete all as specified and as directed.

S&F energy saving high power LED building security light of 30W made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP66 protection, IK-09 and making electric connections in flexible conduit with & incl GI Pipe bracket of appropriate dia & necessary fixing arrangements like clamps, nuts, bolts, washers etc complete all as specified and as directed. Make : LUKER, Cat No LSTE030S or techno-commercially Equivalent in Havells/Jaguar/Philips.

S&F LED lamp 9W or higher rating, 6500K, B-22 complete all as specified and as directed. Make : Havells//Jaguar/Philips/Luker.

S&F LED Rechargeable Inverter lamp 12W or higher rating, 6500K, B-22, 4 Hrs Back-up time complete all as specified and as directed. Make : Havells//Jaguar/Philips/Luker. Imp Note for Item Nos 179 to 184 above : (i) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. (ii) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz Noise level < 44 dB with 2 Yrs Guarantee and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified and as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Bajaj/Khaitan.

S & F TPN DB, 6 Way, IP43, IK09, Metal double door type 415 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and as directed. Make-L&T/LEGRAND/SIEMENS/ABB.

S & F TPN DB, 4 Way, IP43, IK09, Metal double door type 415 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and as directed. Make-L&T/LEGRAND/SIEMENS/ABB.

S & F SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and as directed. Make-L&T/LEGRAND/SIEMENS/ABB.

S&F MCB, TPN, C-Series 415 Volts of capacity 40-100 Amps with breaking capacity 10 KA complete all as specified and as directed. (1W+1S) Make-L&T/LEGRAND/SIEMENS/ABB.

S&F MCB, TPN, C-Series 415 Volts of capacity 16-32 Amps with breaking capacity 10 KA complete all as specified and as directed. (1W+1S) Make-L&T/LEGRAND/SIEMENS/ABB.

S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make-L&T/LEGRAND/SIEMENS/ABB.

S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make-L&T/LEGRAND/SIEMENS/ABB.

S&F single pole & neutral sheet metal enclosure with a two pin & earth plug & socket complete with one single pole MCB, "C" Curve, 10 KA, 20A complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. Note for Item Nos 188 to 195 : Make of MCBs shall be same as the make of MCB DBs.

One light point controlled by two, two-way switches.

One switch socket outlet point 5/6 Amps on same board.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion incl taking down old unsv one complete all as specified and as directed. Make of GI Pipe : TATA/Jindal/Prakash Note : On completion of the complete work/job the Contr is to perform earth resistance tests for each earthing job in the presence of the Engr-In-Charge or his rep & submit test certificates duly signed & certified. If the test results are not satisfactory or not within the permissible limits of relevant Standards/IS then the job is to be redone without any extra cost to the Dept till the results are satisfactory.

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4.0 Core 10 Sqmm incl connecting with suitable glands, lugs etc incl taking down old unsv one complete all as specified and as directed. Make: Havells/Finolex/Polycab/Gloster