CA NO. GE-K-38-2023-24 SPECIAL REPAIR OF CERTAIN ITEMS IN BLDG NO T-64 AT 6 GARH RIF AND BLDG NO TE-04 AT 508 ASC BN UNDER GE KARGIL

Amount

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed by Engr-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

Dismantling of timber scantling fillets, rails, posts rafters, purlins etc over 40 Sqcm, in any position as in framed work, complete all as specified and directed by Engr-in-Charge.

S&F Fe 410-W (Grade -E-250) quality A for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. as diretected and specified by Engr-in-Charge.

S&F Mild steel screw bolts 10 mm dia(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and dircted.

M&L for prepration of new steel surfaces of any description, over 10cm in width or girth,not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.

Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge.

S & F 9 mm thick Prelaminated particle board, interior grade, prelaminated both sides with one side with decorative choice lamination & other side balancing fixed with nails to timber frame work on ceiling complete all as specified and directed.

M&L Plain fillets of second class soft wood (KAIL), wrought, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm, square, rectangular or triangular in section, secured with nails, complete all as specified and directed by Engr-in-Charge.

M&L for 2nd class softwood Moulding as in cornices, picture rails and the like n.exc 6 Sqcm complete all as specified and directed.

M&L for Mouldings, beads, , n. exc 75mm girth on softwood complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed.

M & L for second class soft wood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.

S & F second class soft wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge.

S & F second class soft wood (KAIL), 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkats complete all as specified and directed.

S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed.

S&F anodised aluminium barrel tower bolt extruded sections 150 mm size complete all as specified and directed.

S&F anodised aluminium barrel tower bolt extruded sections 100 mm size complete all as specified and directed.

S&F 150mm long, Aluminium handles, cast type,anodised complete all as specified and directed.

S&F 75mm long, Aluminium handles, cast type,anodised complete all as specified and directed.

S&F 250mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface.

Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) on floor sub base all as specified and directed by Engr-in-Charge.

M&L 25mm thick cement concrete (1:2:4) type B-0 (using 12.5 mm graded aggregate) as sub base to floor as specified.

M & L for 75 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in plinth protection, etc complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing over 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed complete all as specified and directed by Engr-in-Charge complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25 mm thick in riser of step, skirting, dado and pillar laid over cement screed and jointed with jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing and including 10 mm thick rendering in CM (1:4), complete all as specified and directed by Engr-in-Charge. complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick on stone masonry surfaces in CM 1:6 finished even and smooth without using extra cement all as specified and directed by Engr in-charge.

M&L for rendering 15mm thick on stone masonry surfaces in CM 1:4 finished even and smooth without using extra cement all as specified and directed by Engr in-charge.

M&L preparation of newely plastered wall and applying two coats of Oil Bound Distemper over a coat of primer including applying 1mm wall care putty for smoothness of surfaces .all as specified and directed by Engr in-charge.

M & L for preparation of newly plastered surfaces and applying two coat of cement base paint on wall complete all as specified and direcrted by the Engir-in-Charge.

M & L for complete removal of existing treatment and applying two coats of Oil Bound Distemper over a coat of primer including applying 1mm wall care putty for smoothness of surfaces .all as specified and directed by Engr in-charge.

M & L for complete removal of existing treatment and applying Two coats of cement base paint complete all as specified and directed..

Demolition of brick or stone/block masonry built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facings, dressed stone works and precast cement articles, complete all as specified and directed by Engr-in-Charge.

M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.

M&L for Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

S&F 12mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work all as specified and directed.

M&L plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads.sectional area n exc 3.00 Sqcm all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

M&L for preparing old plastered surfaces of wall applying two coat of cement paint all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

M&L for chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment in floors over 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

M&L for prepration of old steel surfaces of any description, over 10cm in width or girth,not otherwise described applying two coat of synthetic enamel paint .

M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 10mm thick screed plaster in cement mortar 1:4 all as specified and directed.

S&F in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc

Taking down shutters of any description exc 1 sq. m but nexc 2 sq m each all as specified and directed.

S&F 35 mm thick second class soft wood glazed and skeleton shutters, open rebated and prepared to raceive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, ed-es of framing plain, chamfered.all as specified and directed.

S&F Aluminum Anodised barrel tower bolts of extruded section, 200mm long.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

M&L for Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate beams, cantilevers, bressummers, lintels over1.5m span 1:2:4 type B-1 using 20mm graded stone aggregate

Taking down chowkhats or frames not exc. 1.5 sq. m each and refixing in same opening all as directed.

M&L for taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets light fittings etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed.

M&L of point wiring for light/fan/bell with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.5 sqmm green in colour PVC multistranded, copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS sunken box/PVC box, surface/ flush type with 3 mm thick pre laminated hylem sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc complete all as specified and directed.

M&L for point wiring for socket outlet with FRLS cable 2.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 2.5 sqmm green in colour PVC multistranded, copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS sunken box with 3 mm thick pre laminated hylem sheet/PVC box, surface/ flush type for mounting fittings such as switches, sockets, for multi 5 pin 5 amp flush type socket outlet on independent board, complete all as specified and directed.

M&L for point wiring for socket outlet with FRLS cable 2.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 2.5 sqmm green in colour PVC multistranded, copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS sunken box with 3 mm thick pre laminated hylem sheet/PVC box, surface/ flush type for mounting fittings such as switches, sockets, for multi 6 pin 15 amp flush type socket outlet on independent board, complete all as specified and directed.

Supply and fixing Switch piano flush type single pole one way, 5/6 Amps, ISI Marked fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring) complete all as specified and directed.

S&F Switch socket combination 2 in 1, 6A flush type

S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal

M&L of ceiling rose on PVC square Blocks surface bakelite 3 terminal complete all as specified and directed.

Supply & Fixing LED complete fitting 1 x 18/20 Watt, appx 4 feet long extruded polycarbonate environment friendly and aluminium housing & integrated driver, including electric connection with using 2 core flexible copper conductor cable of size 1.0sqmm from ceiling rose to tube fitting, complete fitting with all accessories and following specifications all as directed. (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 10 C to plus 45 C (d) Power factor : Minimum 0.95 (e) THD : Max 10% (f) IP rating IP- 20. (g) Aluminium housing & Integrated Electronic driver (h) LED Driver of the make as of the luminire. (j) LED driver should be complete with all protections viz open/short protection, over voltage protection, all as per standard design of manufacture. (k) Surge protection minimum 2.5 KV. (l) CCT 6500K (m) CRI : More than 80. (n) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily).

M&L for Distribution Board double Door 12 way SPN made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting with bus bar rating 200 Amps, dust and vermin proof , IP-43 protected, suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.

Supply and fixing 220V 10KA 'C' curve MCB SPN of 32 amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed..

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

S&F of Magnum Flood light LED 70 W with high pressure die cast housing and IP65 Protection,including hanging materials complete,all as specified and directed. Make Havells / PHILIPS/ Crompton or equivalent

M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3mm thick, buried directly in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel and connected to main switch board or equipement,including watering arrangement with GI light grade 20mm bore watering pipe with funnel and wire mesh with PCC chamber.CI cover with frame,40 mm dia GI pipe light grade for protection of earthing lead etc including necessary excavation in any type of strata,returning,filling,removal of soil outside MD land,filling of charcoal and salt complete all as shown in electrical plate No.3 of MES Sch Part I,connected to Earthing test point all as specified and directed on testing on completion. Notes: (i) Earth continuity conductor including protection pipe up to 7.5 metres from earth electrode will be include in unit rate,complete all as specified and directed. (ii) Arrangement for earth resistance test should carried out by the contractor.no extra payment shall be provided for the same.

Supply & fixing light grade GI Pipe of size 40 mm bore, ISI marked on pole/wall for cable protection complete all as specified and directed.

M&L of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 25 sq. mm 4 core complete all as specified and directed,including taking down of cable.

Excavation in trenches hard and dense soil, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, not exceeding 10 sqm on plan and not exceeding 1.5Mtr in depth & getting out of hard and dense soil for taking out pipe & laying of pipe & getting out for diverting of CI pipe line complete all as specified and directed.

Removal of excavated soil to distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick complete all as specified.

Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I, complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, Type I, flat, size 250 mm x 150mm x 40mm laid dry over electric cable for protection,complete all as specified and directed.

M&L of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sq mm 2 core complete all as specified and directed,including taking down of cable.

Supply and fixing in replacement of LED luminarie 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete 6000K/3000K with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

M&L of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq. mm 4 core complete all as specified and directed,including taking down of cable.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers.

Note : Deduction for amount of Rs 54968.60 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

KASHMIR FAIR DEAL SERVICES

M/S Ghulam Mustafa

SUMEET TRADING CORPORATION

LUXMI ELECTRONIC WORKS

CONTRACTORS INDIA

R C TRADERS