DEPOSIT-VCB across Kattachirapuzha- Providing and fixing MS shutters with operating mechanism for VCB across Kattachirapuzha in Thalakkad Gramapanchayath-General Mechanical Work

Amount

CIVIL WORKS- Demolishing,Centering & Shuttering,Concreting Work for fixing SS C GROOVE, SEAL TRACK and SILL BEAM.

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

OD13763/2022-2023:RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height 2.00m including labour dismantling the bund after completion of the work etc. complete.

OD13762/2022-2023:Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

SUPPLY, FABRICATION & ERECTION OF MS SHUTTERS-6 NOS

OD10572/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD10573/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD10579/2022-2023:Supply of MS round bar including cost of conveyance charges

85.103:Supply of MS checquered plates including cost of conveyance charges

OD11118/2022-2023:Supply of SS BOLT and NUT up to 300mm Length including cost of conveyance.

OD10576/2022-2023:Fabrication,Supply,Erection and Assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track,seal track,Seal seat etc as per approved specifications,drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing,welding,shearing,grinding etc,lead and lift,conveyance,incidental and handling etc complete

OD10578/2022-2023:Fabrication and errection of Embedded parts for canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl fficer at site including cost of labour,machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

OD10577/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD10605/2022-2023:Providing EN-8 Screw Rod 7.50 Tonne Capacity 4.00 Mtr lift Screw Rod having one number of EN-8 Screw Shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all material, labour, hire charges and conveyance. (63mm Dia Screw rod )

OD10585/2022-2023:Providing of Double worm and pinion having a lifiing speed of around 5.00 cm/minfor hand operation /manual operation including cost of all materials, labour, hire charges and conveyance..

OD10586/2022-2023:Providing of worm and pinion having a lifting speed of around 5.00 cm/min for hand operation including cost of all materials, labour, hire charges and conveyance

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

OD10604/2022-2023:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including hand rails , lader etc. for the same including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied..

OD11120/2022-2023:Providing screw rod locking arrangement to the shutters including cost of materials ,fixing charges etc complete

OD11121/2022-2023:SUPPLYING and STACKING of PAD LOCK.

Kinanath V P

ALI ASHRAF

ASHIFUL HAK.C

P.Damodaran, G.R.Industries

Bidder Name

Kinanath V P

P.Damodaran, G.R.Industries

ASHIFUL HAK.C

MANAF V

ALI ASHRAF