AMRUT 2 AMRUT Design construction and commissioning of 3 MLD WTP and 10LL OHSR at Mulayam Package 10 Providing and Conveying treated water directly from the pressure filter to distribution line through 150mm GI Pipeline and Chlorination using Chl

OD45114/2026-2027:Supply of 150 mm GI pipes

OD45121/2026-2027:Fabricating 150mm dia. G.I. Bend

100.12.11:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 150mm diameter nominal bore.

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

OD46786/2026-2027:Cutting 150mm (I.D.) GI pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick

OD46785/2026-2027:Welding 150mm (I.D.) GI pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick

OD44268/2026-2027:Design, supply, and installation based on site conditions and as directed by the Engineer in charge and commissioning of 1 no of Chlorine Dosing System with all necessary accessories. The chlorine solution shall be direcly injected to the system at suitable point by using suitable chemical dosing pump (mechanical diaphragm pump/Motorized Diaphragm Metering/Dosing Pump) of PVDF / PP (chemical resistant) Pump Head Material, PTFE (Teflon) coated diaphragm, Ceramic / SS316 ball valves, PTFE Valve Seat, Viton / EPDM (compatible with the chemical) O-Rings/Seals having adjustable discharge/flow rate up to 10 LPH (adjustable from 0?100%) at a delivery pressure of 15 kg/cm2 (15 bar), to maintain required residual chlorine in the treated water as per the norms including all accessories such as suitable angle stand to fix the pump set, accuracy of ±1% of rated flow, IP65 or better degree of Protection, best quality 100 lts PVC tank to the correct alignment, connections as 6 × 8 mm or 8 × 12 mm tubing with foot valve, injection valve, and tubing, Wall/Floor mounted and wiring from existing panel board to the pump set by using power cables encased in PVC conduit and trail running, etc. complete.