Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.1 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹43.5 L+₹2.4 L (5.72%)Rejected-Finance | L2 | Rejected-Finance Rejected due to bidder not L1 | |
| 3 | L3₹43.6 L+₹2.5 L (6.01%)Rejected-Finance | L3 | Rejected-Finance Rejected due to bidder not L1 | |
| 4 | L4₹44.2 L+₹3.1 L (7.51%)Rejected-Finance | L4 | Rejected-Finance Rejected due to bidder not L1 | |
| 5 | L5₹45.5 L+₹4.4 L (10.6%)Rejected-Finance INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L5 | Rejected-Finance Rejected due to bidder not L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
25 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
REPAIRS TO MD ACCN OF AH LINE PS LINE KS LINE AT ZONE A AHMEDABAD
2022_MES_543830_1
8277/E8
Open Tender
Civil Works
Works
270 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹90,000
Yes
27 Sept 2022
6 Aug 2022
27 Aug 2022
6 Aug 2022
25 Aug 2022
11 Aug 2022
6 Aug 2022 - 11 Aug 2022
Amount
Demolition of brick work built in cement mortar of any description complete.
Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointed in any mortar complete.
Demolition of cement concrete of any description and in any position not otherwise specially provided for complete.
Dismantling timber scantling 40Sqcm and over in section in any position in unframed work as in rafters, purlins etc complete.
Dismantling of wrought iron work or mild steel work of any description not otherwise provided for complete.
Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness, including cover fillets complete.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete.
Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete.
Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm each complete.
M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate in roof etc as levelling coarse etc. complete.
M&L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in benching, copings, bed block for filing hollow space of steel chowkhats, including weathering, slightly rounded or chamfered angles & throating as directed including use of necessary form work complete.
Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete
M&L brickwork with sub class B old size bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 complete.
M&L brickwork with subclass ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete.
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in brick wall complete
M&L for green marble slab 15-16mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete.
M&L for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete.
S&F factory made 30 mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete.
S&F Factory made solid panel PVC door /cupboard shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete
S&F for Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube and fixed in opening complete.
S&F Aluminium anodised barrel tower bolt of extruded section 200 mm size complete.
M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete.
S&F 100 mm long mild steel butt hinges, medium weight cold rolled complete.
S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F in repair 300mm, mild steel ordinary rat rail rod pattern springs including roller and roller plate complete.
S&F in repairs Continuous (piano) hinges width of flange (whene open) 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete
S&F stainless steel butt hinges medium weight 100 mm long complete
S&F 150 mm size aluminium anodised cast type door handles complete.
S&F Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete.
S&F in repair Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete
S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, framed for ceiling; ladders; railings; framework of water tanks and similar work conforming to Fe-290 (Gde E- 165) complete.
S&F mild steel rolled sections as in framing made of mild steel angles, Tee for fixing boards in ceiling and the like fixed with angle cleats and connecting plates of grade Fe-410-S complete.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-w (Gde E- 250) quality A complete all as specified.
S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
S&F mild steel Welded steel wire fabric of weight exe 3.5 kg but n. exc 4 kg/sqm fixed to steel members with spikes complete.
Taking down and refixing of steel door shutter exc 1 Sqm but n exc 8 sqm each by replacing projected type unserviceable hinges with welding new hinges or welded of existing broken hinges and handles to window frames, easing of shutter top, proper closing with oiling to hinges and painting at welded portion to match the existing surface complete.
Taking down and refixing steel window shutter not exc 1 Sqm each by replacing projected type unserviceable hinges with welding new hinges or welded of existing broken hinges and handles to window frames, easing of shutter top proper, closing with oiling to hinges and painting at welded portion to match the existing surface complete.
S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete with glazing bars dove-tailed or welded complete including one coat of shop coat of primer and making the surface good complete ..
S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete without glazing bars dove-tailed or welded complete including one coat of shop coat of primer and making the surface good complete ..
S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, rubber gasket, aluminium beading etc complete .
S&F powder coated anodised Aluminium alloy 1.5mm minimum thick sections sliding windows with frames and 3 track sliding shutters duly fitted with & including neoprene beading, glazing clips, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle & two shutters tinted glass panes 4.8 mm nominal thickness, one shutter with stainless steel wire cloth .36mm dia and average width of aperture 1.4mm etc. & making good disturbed surfaces by finishing the surface to match the exisiting surface after fixing of window complete.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete.
S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete.
Refixing of asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete.
S&F 6mm thick asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets complete.
M&L in repairs 6mm thick AC plain building boards fixed as in ceiling complete.
S&F in repair for 18/19mm thick Prelaminated interior grade Block boards, grade 2 quality, decorative type with decorative face PVC veneer on one face solid core, general purposes type fixed with screws to timber frame work with magnetic locks complete.
M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including bitumen filling in between panels etc complete.
M&L for providing 75 mm thick cement concrete 1:2:4 type B-2, using 40 mm graded crushed stone aggregate as in road / path, hard standing etc. finishing cement concrete surface even and smooth without using extra cement and including all necessary form work to divide the area in panels exc 6 sqm but not exc. 9 Sqm each complete.
M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in levelling course to maintain slope & to receive finishes complete.
M&L for non skid ceramic (colored) 7 to 8 mm thick as in floor area of each tile 300x300 mm, set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors complete.
M&L for non skid ceramic (colored) 7 to 8 mm thick in vertical surfaces such as skirting f each tile 300x300 mm, set and jointed in neat cement slurry and pointed in white or colored cement to match over and including 10 mm thick backing coat in cement mortar 1:4 complete.
M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete.
M&L for machine cut kota stone as in flooring, stair case landing. treads of steps etc, 18-25mm thick over cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing, polishing complete.
M&L for machine cut Kota stone slab 18-25mm thick in riser of steps, skirting, dado and pillar laid over 1:4 cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing, polishing complete.
M&L 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete.
M&L for machine pressed coloured pre-cast concrete glossy interlocking rubber moulded paver block any shape and size conforming to IS 15658-2006 of 60mm thickness including M-35 grade with grey cement and pigment and Sand filling 50mm thick under floor/over floor or in foundations including well ramming complete.
S&F Providing and laying at or near ground level factory made machine pressed kerb stone of M-25 grade cement concrete (L-300mm T-100mm H-350 mm) in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required & all necessary earth work complete.
Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete.
M&L for Rendering on other than fair faces of brick work 10 mm thick in CM 1:6 first layer and second top layer of 05 mm thick in CM (1:4) mixed with water proofing compound in top @ 3% by weight of cement or as per manufacturers instructions on fair faces of first layer & finishing the surfaces even & smooth without using extra cement complete. (WPC measured and paid separately)
M&L 10mm thick rendering in cement mortar 1:6 on fair face of brick work or concrete internal surfaces & finished even and smooth without using extra cement complete.
M&L 10 mm thick rendering cement plaster on ceiling surfaces in any position in cement mortar 1:3 & finishing the surfaces even and fair complete.
M&L for applying two coats of cement base paint on new plastered surfaces of wall over a coat of primer complete.
M&L for prepartion of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying 1.5mm average thk wall care putty to wall surface complete.
M&L for preparation of old surfaces by complete removal of existing treatment and applying two coats of oil bound distemper over one coat of primer over 1.5mm average thk wall care putty on walls complete.
M&L preparing newly plastered or unplastered surface of wall and applying three coats of white washing complete.
M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including brooming down or scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper complete.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including brooming down or scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement based paint on walls complete.
Hacking out old broken glass (any thickness, size, quality or description) form metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete.
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane complete.
M&L for 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete.
M&L for preparation of old painted wood and wood based surfaces by knotting, stopping etc of any description over 10 cm width or grith and applying one coat of synthetic enamel paint complete.
M&L for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete.
M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete.
M&L for complete removal of existing treatment and applying two coat of synthetic enamel paint (ordinary tint) over one coat of red oxide on steel surfaces, complete.
S&F in repair 25 mm dia fancy type curtain rod with brackets, stops, rollers etc. of stainless complete.
Taking up or down steel tubing 15 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site.
S&F only 15 mm medium grade GI tubing with all tube fittings (such as bends, elbows, tees, short pieces, connections, caps, plugs and unions etc and fixed with clips wall hooks, wooden plug etc & fixed to walls, in floors, ceiling and making good complete.
Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floor etc) complete
Taking up or down steel tubing 20 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site.
S&F 20 mm medium grade GI tubing with all tube fittings (such as bends, elbows, tees, short pieces, connections, caps, plugs and unions etc and fixed with clips wall hooks, wooden plug etc & fixed to walls, in floors, ceiling and making good complete.
Refixing 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floor etc) complete
Dismantling water tanks and removing of capacity exc 250 & n.exc 500 ltrs complete.
S&F 500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc complete.
S&F in repairs Bib taps (long body) CP fancy type cast copper alloy for 15mm bore pipe, screwed for iron pipes or for brass ferrule complete.
S&F in repair pillar taps CP cast copper alloy with capston heads, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete.
S&F in repairs stop cock 15mm chromium plated fancy type cast copper alloy, screwed down, with high pressure screwed both ends for iron pipe or for union complete.
S&F in repairs 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete.
S&F in repairs Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms) complete.
S&F in repairs 20 mm dia PVC ball cock (PVC float valves) high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete.
S&F in repairs PTMT Swivel Shower rose, 15 mm dia ( Minimum wt 40 gms) complete.
S&F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete
S&F in repairs PVC(SWR) 110 mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on walls complete.
S&F in repairs PVC(SWR) 75 mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on walls complete.
S&F in repairs 110 mm bore PVC (SWR) bends 110mm ( any radius), diminishing pieces or tapers with access door ( larger bore measured) complete.
S&F in repairs 75 mm bore PVC (SWR) bends 75mm ( any radius), diminishing pieces or tapers with access door ( larger bore measured) complete.
S&F in repairs 75 mm bore PVC (SWR) branch pieces, single ( equal or unequal), ordinary or inverted ( spigot or socket type) or with parallel branches with access door complete.
S&F in repairs 110mm dia PVC (SWR) branch piece single (single 'Y') equal or unequal with acess door complete.
S&F in repairs 32 mm bore Brass chromium plated Waste coupling for wash basin with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete.
S&F in repairs 40 mm bore Brass chromium plated Waste coupling for kitchn sink with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete.
S&F repairs 75mm bore PVC (SWR) floor trap long body type with grating including jointing with solvent cement complete.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm complete.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste, chain & plug & porcelain stopper including brackets with cutting for pinning in ends of bracketes or erecting stand and waste pipe complete
S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed complete.
S&F in repairs vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including connecting to flushing cistern low or high level, 32mm dia polyethylene fush pipe etc (excluding cost of flush tank) including provn of 1:5:10 concrete bedding complete.
S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete.
S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete.
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete.
S&F in repairs 125mm size brass chromium plated shower rose fixing with 15mm dia pipe complete.
S&F in repair 15 mm bore angle cock with flage complete.
S&F in repairs sinks without drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of with bowl size 410mm x 330mm x 160mm complete.
S&F in repairs brass chromium plated Toilet paper holder complete.
S&F in repairs stainless steel towel rail of standard size including brackets fitted to wall fixed complete.
S&F in repairs CP grating square of size 150mm complete.
S&F in repairs chromium plated soap dish complete.
M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound complete.
Taking down old damaged water proofing treatment from roof surface of any description incl broken out/ loose plaster/PCC (any thickness), scrubbing down with water etc. and M&L for APP based polymeric membrane minimum weighing 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid by torch application over one coat of bituminous primer @ 0.30 kg/sqm over and including 15 mm thick cement plaster in CM 1:4 including water proofing compound @2% by weight of cement, applying a coat of aluminium paint including disposal of debries exe. 50 mtr and n.exe. 100 mtr from starting point complete.
M&L for guniting for shortcrete 1:2 (CM) mixed with epoxy resin and hardner @ 2% by weight of cement in equal proportion using short crete pumps allied equipment, in thickness 30 mm all as per manufactureres instruction (upto 10-15 mtr height including formwork & scaffolding) and finishing the surface even and smooth including necessary chipping/taking down loose concrete complete.
r s corporation
GIRNAR CONSTRUCTION
Shreeganesh Construction
DMA PROJECTS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .