Upgradation of Phase- II and III of Visthapit Awas at Belgaria, Dhanbad (2nd Call)

Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.Taking 5% of total plaster work inside and outside 12mm and 6mm for repair works SAME AS QTY ITEM NUMBER 4AND 5 (1385 unit)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 (1Cement: 2coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size) lumsum qty

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.Plaster 12mm

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) lumsum

Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and laying Doublecharge vitrified floor tiles in different size (thicknes to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006of approved make in all colours and shades laid on 20mm thik bed of cement mortr 1:4(1 cement: 4 coarse sand),including grouting the joints with white cement and matching pigments etc. complete. size of tile 600x600 mm

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/l. 5.6.23.2 With commercial grade colour 15x15 cm tiles.

Providing and laying 25mm thick kotah stone slab flooring of approved size, texture and colour over 19mm thick base of lime morter (1:1:1) (lime putty : surkhi: coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. (i) 300 x 300 mm size

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 8.2.2 Granite of any colour and shade 8.2.2.1 Area of slab upto 0.50 sqm

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)

Supplying, fitting and fixing 20 guage G.C.I, sheet gate fitted on M.S. Angle frame of size 60x60x6mm. including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l.

Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Extra for each coat of cement wash, distemper, paint or snowcem over exterior surface for each consecutive floor above first floor including scaffolding etc. All complete as per specification and direction of E/I. 3/4 Out side item 1 of E=

Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.lumsum(for chajja)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).lumsum(for chajja)

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)lumsum (For Chajja)

Centering and shuttering including strutting, propping etc. and removal of form forWeather shade, Chajjas, corbels etc., including edges lumsum (For Chajja)

Repairing of damaged balcony,chajja & parapet etc.by 15mm cement cocrete(1:0.5:3) with 10mm stone chipping applying cement slurry on the under layer @2kg of cement/sqm,top layer with 12 to 20mm thick plaster (1:4) in chajjas,balcony,pillers,columns,parapet,soffits etc upto hight 10m above ground level including double scaffolding system stiffened with bracing,runners connecting with bedgs wherever required with special safety features for workman etc all complete.Taking 40% Qty (For Chajja)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

9.118.1 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).Taking 50% Qty

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/l.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l. Qty is same Putty & Deduct Outer

Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone-III) derived from natural sources : 6 graded stoneaggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25 mm nominal outer dia Pipes

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

Lettering with black Japan paint of approved brand and manufacture

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Easing & adjusting door & window shutter including necessary repair including taking down & refilling of shutter all complete door

Removing unwanted trees /plants & the like from wall and roof including removing roots by cutting wall & roof & finishing the same with cm (1:4 ) including scaffolding etc complete job upto 10 mtr height

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-charge .Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 100 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler110 mm

Single pushfit Coupler 75 mm

Single pushfit Coupler 110 mm

Single tee with door 75x75x75 mm

Single tee with door110x110x110 mm

Single tee without door 75x75x75 mm

Single tee without door110x110x110 mm mm

Bend 87.5° 75 mm bend

Bend 87.5°110 mm bend

Shoe (Plain)

75 mm Shoe

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board . 470x420 mm bowl depth 178 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :25 mm nominal bore

Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with one side teak decorative and another side commercial veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

PVC WATER Storage tank cover

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.

Providing and fixing fan hook

Galvanised steel wire crates of mesh size 100mmX100mm woven with 4mm dia.GI wire in rolls of required.

Cicko powder/Inpermo Waterproofing comp given=3.6kg/9.3sqm

Carrage of material Carriage Cement upto 8 KM

Sand av lead 30 K M

Chipes av lead 20 K M

Metal av lead 20 K M

Carriage Bricks upto 8 KM

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : Roof Area

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:1.5:3 (1Cement: 1.5 coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size)

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular type switch, modular plate, suitable sizeG.I. box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc as required. Group-A

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular type switch, modular plate, suitable sizeG.I. box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc as required. Group-B

Supplying & fixing 5/6 amps one way modular switch on the existing modular plate and switch box/cover including connections but excluding modular plat . as required (1 nos for indicator light

Supplying & fixing 5/6 amps 3 pin socket outlet modular switch on the existing modular plate and switch box/cover including connections but excluding modular plat . as required (1 nos for indicator light

twin control point wiring in pvc conduit with modular type switch Wiring for twin control point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit. 2 way with modular switch, modular plat suitable GI Box etc as required.

power plug Wiring in pvc conduit (2x4 sq mm) wiring for light/power plug with 2 x 4 sq. mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit alongwith 1 no 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.

Supplying and Fixing power plug point with modular type accessories supply and fixing suitable GI Box with modular plat and cover in front on surface of in recess including providing and fixing 6 pin 15/16amps modular socket outlet and 15/16 amps modular switch connection, painting etc as required.(4 light plugs to be used in non residential buildings)

Wiring for circuit/submain wiring alongwith earth wire with the 2 x 2.5 sq mm + 1x 2.5 sq mm earth wire size of FR PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.

Wiring for circuit/submain wiring alongwith earth wire with the 2 x 6 sq mm + 1x 6 sq mm earth wire size of FR PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required.

supply and fixing rewireable double pole/TP & N switch disconnector. providing and fixing 100 amp TP&N shit metal switch disconnector fuse unit inside the existing metal board with rewireable type fuse including drilling holes in metal board making connection etc as required.

Supplying and Fixing 4 way Single door single pole and neutral, sheet steel, MCB distribution board, 240 volt, on surface/recessed, complete with tinned copper busbar, neutral busbar, earth bar, din bar, , interconnections, powder painted including earthing etc, as required (But without MCB/RCCB/Isolator)

Supplying and fixing 6 amps to 32 amps rating, 240 volt 10ka 'C'curve miniature curicit bracker suitable for inductive load 6/32 single pole in the existing MCB DB complete with connections, testing and commissioning etc, as required.

Supplying and fixing 6 amps to 32 amps rating, 240 volt 10ka 'C'curve miniature curicit bracker suitable for inductive load 6/32 DP in the existing MCB DB complete with connections, testing and commissioning etc, as required.

Supplying & Fixing 2 pin 5 amp ceiling rose on the existing Junction box / wooden block including connection etc as required.

providing and fixign 100 amp capacity Busbar Chamber with Four Strip of length 300mm made copper suitable for 100 Amp.capacity complete with all accessories including connection earthing the body etc as required

Supplying & Fixing batten/angle holder including connection etc. as required.

Supplying & Fixing ding dong sound call bell single phase 230 volt complete as required

Supplying & Fixing stepped type electronic fan regulator on exsiting modular plate & switch box including connections but excluding modular plate etc as required.

Supplying & Fixing Bulk Head fitting with 9/10 watt CFL/LED.

Supplying & laying 35 sq mm 3.5 core heavy duty al armoured cable

Supplying & Fixing LED street light 30/36 wattt.

Providing and fixing MV Danger Notice Plate of 200 mm x 150mm made of mild steel at least 2mm thick & Vitreous Enameled White on both side & with inscription in single red colour on front side as required.

Add GST @ 18%

Add Labour Cess @1%

Please Enable Macros to View BoQ information