Repairs to Ganesh Visarjan Tank at Sailem Bhatt in Taleigao Constituency.

Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : All kinds of soil

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Centering & shuttering including Strutting, Propping & removal of forms for : Foundations, footings, bases for columns and mass concrete.

Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: All works upto Plinth Level.

Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc. b.String courses, copings, bedplates, anchor blocks, plain window sills and the like.

Providing & laying of shot Blasted Paving Tiles Basant or Equivalent make manufactured by tile making machine complying with IS:1237: ref: 2005 and manufactured by ISO certified plant. : Other colours

12mm cement plaster 1:4 (1 cement : 4 fine sand)

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Supply & fixing glass Reinforced (FRP) Needles along with FRP Coated M.S. Frame Needles shall be made out of standard quality FRP composite materials. Smooth surface shall be provided from both the side of the needles, toung and box type groove shall be provided to the needles for interlocking in to each other. Box type groove protect the edge of the Needle. Rubber seal of size 15mm x 4mm thk. shall be fixed in to the groove for water tight performance. Handles shall be provided at two locations for lifting and lowering of the needle in to the frame. FRP needles shall be tailor made section as per size required at site for closing the bandhara the rate are as follows for thickness of needles 65 mm + 3mm (Hallow type) for the water depth 0 mtr to 2 mtrs from top and width not more than 2.0 mtrs in clear span as per directed by engineer in charge etc.

Please Enable Macros to View BoQ information