Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.6 LAccepted-AOC 2788 FOURTH FLOOR GALI RAJPUTANA ARYA PURA SABZI MANDI NEW DELHI KAMLA NAGAR NORTH DELHI DELHI 110007 UDYAM DL 01 0057966 | NORTH DELHI | DELHI | 110007 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹18.9 L+₹1.3 L (7.65%)Rejected-Finance 43 MANAK BHAVAN FIRST FLOOR GUMANPURA KOTA 324 007 RAJASTHAN | KOTA | KOTA | RAJASTHAN | 324007 | L2 | Rejected-Finance Other Than L1 Bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Kota
Dadwara Complex, Military Station Kota - 324002
REPAIR/MAINT OF DAY TO DAY COMPLAINTS IN BLDGS UNDER AGE B/R II AT MIL STN KOTA
2022_MES_564002_2
8682/E8
Open Tender
Civil Works
Item Rate
274 days
KOTA
Contractor shall be enlisted with MES in Class E and above and category a(i) subject to satisfactory remarks wrt performance in respect of works in hand as reflected in Work Load Return (WLR) or any other report circulated by competent engineer a
8 documents required · 8 mandatory
₹500
GE KOTA
₹40,000
Yes
4 Mar 2023
31 Dec 2022
23 Jan 2023
31 Dec 2022
21 Jan 2023
9 Jan 2023
31 Dec 2022 - 5 Jan 2023
Amount
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thickness (below or above GL), complete all as specified and directed.
M&L for 25mm thick plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring/sub base finished rough to receive floor finishes / screed complete all as specified and directed.
Demolition of brick work/stone boulder masonry, built in CM incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.
M&L for joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L glazed ceramic coloured tiles 300 x 250 x 7mm / 450x300x7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, laid over and including 10mm thick rendering in cement mortar 1:4 on brick work/ concrete surfaces fair faces of surfaces, complete all as specified and directed.
M&L brick work with pulverized fuel Ash-lime bricks (old size fly ash bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6, complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed.
S & F in renewal of Prelaminated particle board 18 mm thick, interior grade, ISI marked as in cupboard shutter / shelves, prelaminated one side with decorative choice lamination and other side balancing white lamination & including 6mm thick teak wood beading on exposed edges, fixed with screws to timber frame work complete all as specified and directed.
S&F in renewal of continuous piano hinges, mild steel bright finish or electro galvanised, 30mm width of flaps when open, complete all as specified and directed.
S & F in renewal of Aluminium anodised barrel tower bolts of extruded section, 200mm long complete all as specified and directed.
S & F in renewal of mild steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed.
S & F in renewal of mild steel butt hinges 125mm size cold rolled medium weight and fixed complete all as specified and directed.
S&F in renewal of 300 mm long mild steel ordinary helical door spring including roller and roller plate, complete all as specified and directed.
S & F in renewal of curtain rails 25mm bore decorative type chromium plated with fixing brackets, stops, rollers, etc complete all as specified and directed.
S&F in renewal of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane as including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.
S & F figured glass, pinhead type , 3 mm thick and glazing with oil putty/wooden beads in squars n. exc 0.5 sqm each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.
S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane as including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.
M & L for running welding in repair of thickness of metal to be welded n.exc 6mm complete all as specified and directed.
S&F in renewal of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed.
S & F in renewal of stove enamelled black mild steel handles left and right for steel window/ventilators as per existing shape/size complete all as specified and directed.
S & F in renewal of mild steel stove enamelled peg stay, 300mm long with MS nut & Bolt, suitable for steel window/ ventilators etc, complete all as specified and directed.
Taking down aluminium doors/Window shutters carrying out minor repairs/adjustments including rubber beading, aluminium beads, cleats of required size and refixing in same position, complete all as specified and directed.
S & F in renewal of top rail/lock rail/bottom rail of aluminium doors and windows shutter including minor repairs/ adjustment incl provision of materials i.e Aluminium rails, cleats, change or repair of locks as required, complete all as specified and directed.
S&F in renewal of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, with and including taking down & refixing the aluminium door shutter, complete all as specified and directed.
S&F in renewal of door closer hydraulically regulated, aluminium die cast body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed, complete all as specified and directed.
S&F 500 litre capacity ISI marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position incl connecting with GI tank nipple along the existing pipe and including dismantling old u/s existing water storage tank complete all as specified and directed.
S&F 1000 litre capacity ISI marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position incl connecting with GI tank nipple along the existing pipe and including dismantling old u/s existing water storage tank complete all as specified and directed.
S&F of ball valve 20 mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S & F galvanized steel water tubes medium grade 15mm dia with all fittings, fixed to walls/ceilings or laid in floor etc complete & including taking down old steel tubes, complete all as specified and directed.
S & F galvanized steel water tubes medium grade 20mm dia with all fittings, fixed to walls/ceilings or laid in floor etc complete & including taking down old steel tubes, complete all as specified and directed.
S & F in renewal of 15mm bore GI nipple fully threaded with two numbers check nuts and washers for PVC tank, for inlet and outlet pipe, complete all as specified and directed.
S & F in renewal of 20mm bore GI nipple fully threaded with two numbers check nuts and washers for PVC tank, for inlet and outlet pipe complete all as specified and directed.
M & L for opening of air lock/blockage in GI pipe line from outlet of water tank to all internal GI pipes/fittings for smooth flow of water from bib taps/showers/WHB pillar tap/Stop valves by air pressure/water gravity pressure with use of suitable chemical, complete all as specified and directed.
S & F in renewal of PVC water tank cover lid for any capacity of PVC water tank, fixed with suitable bolt & nuts, complete all as specified and directed.
S & F in renewal of Vitreous china wash hand basin, white/coloured, flat back, size 550X400 mm incl MS brackets and cutting for and pinning in ends of CI brackets or erecting stands etc, complete all as specified and directed.
S&F in renewal of vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest incl one P or S trap and providing lime concrete bedding and connecting to flushing cistern, complete all as specified and directed.
S&F in renewal of vitreous china water closet pedestal pattern, white, excluding fixing bolts, flushing cistern and including flush pipe, PVC seat cover & including one P or S trap, connection to drain etc, complete all as specified and directed.
S & F in renewal of superior quality PVC Urinal waste pipe, 32 mm bore, 650mm long, complete all as specified and directed.
S & F in renewal of plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
S & F in renewal of PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed.
S&F in renewal of ball valve 15 mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 142 grams) complete all as specified and directed.
S&F in renewal of ball valve 20 mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S&F in renewal of ball valve 25 mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 455 grams) complete all as specified and directed.
S&F in renewal of flushing jet made of stainless steel with 1.15 mtr long PVC flexible pipe including one CP brass nut screwed to 15mm bore angle/stop cock, fixed to EWC, complete all as specified and directed.
S&F in renewal of health faucet made of ABS body having chrome finish with 1 m long PVC flexible pipe including one CP brass nut screwed to 15mm bore angle/stop cock, complete all as specified and directed.
S & F in renewal of PVC flexible waste down pipe - 32/38 mm dia and 1150 mm long with PVC waste coupling, complete all as specified and directed.
S&F in renewal of shower rose, brass chromium plated, 125 mm size with or without swivel joint, screwed to iron pipe or for union of 15 mm dia, complete all as specified and directed.
S&F in renewal of angle valve 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.
S&F in renewal of two way angle valve 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.
S & F in renewal of PVC syphon with handle for PVC flushing cistern, any capacity, complete all as specified and directed.
S & F in renewal of PVC connections, 450 mm long with two PTMT nuts and washers, suitable for connecting 15 mm bore pipes, complete all as specified and directed.
S & F in renewal of GI fittings for 15mm bore pipe except GI pipe i.e. GI elbow, socket, union, Tee, Nipple upto size 150mm long, complete all as specified and directed.
S & F in renewal of GI Fittings for 20mm bore pipe except GI pipe i.e. GI elbow, socket, union, Tee, Nipple upto size 150mm long, complete all as specified and directed.
S&F in renewal of wall mixer for mixing hot & cold water, with telephonic shower arrangement, chromium plated brass with three joints, screwed to iron pipe or for unions, 15 mm bore and fixed with two stainless steel wall flange, complete all as specified and directed.
S&F in renewal of mixing valve (wall mixer) for mixing hot & cold water, without telephonic shower arrangement, chromium plated brass with three joints, screwed to iron pipe or for unions, 15 mm bore and fixed with two stainless steel wall flange, complete all as specified.and directed.
S & F in renewal of 15 mm dia chromium plated brass central hole wash basin mixer (pillar tap) with accessories in wash basins for mixing hot and cold water, screwed down for 15 mm dia GI pipe complete all as specified and directed.
S&F in renewal of bib tap standard of PTMT any colour, high pressure, screwed for iron pipe and fixed, 15 mm bore (minimum weight 90 gms), complete all as specified and directed.
S&F in renewal of pillar taps, cast copper alloy, with capston heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed, complete all as specified and directed.
S & F in renewal of waste coupling of PTMT full threaded 32mm bore, minimum weight 45 gms, complete all as specified and directed.
S & F in renewal of Bib taps, cast copper alloy, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and directed.
S&F in renewal of PTMT alloy toilet cabinet with mirror of overall size 350x450 mm and fixed to wall complete all as specified and directed, complete all as specified and directed.
S&F in renewal of stainless steel grating doom of 100mm dia, with or without waste pipe hole, complete all as specified and directed.
S&F in renewal of 300 mm long mild steel sliding door bolt clip type stove enamelled black with bright bolt not less then 12 mm dia and incl a minimium of 6 bolt & nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F in renewal of sink with draining board made of stainless steel 1mm thick with plugs, washers and waste coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of suitable angle iron, 32 mm dia superior quality PVC waste pipe and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in renewal of stainless steel sink, 1.00mm thick for kitchen or laboratory with plugs, washers and waste coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of suitable angle iron, 32 mm dia superior quality PVC waste pipe and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
Attending plumber complaints and rectify defects (i.e flushing cistern leakage from down pipe, flush handle, PVC connection, stop valves, Leakage of bib taps, Wall mixer, basin mixer, stop/ angle cock, Pipe line leakages, etc including provision of all type of washers, rubber cone, M-seal spindle for Bib tap/stop cock with necessary tools & plant and made functional to entire satisfaction complete all as specified and directed.
Attending carpenter complaints and rectify defects (i.e tightening of loose door/window/cup board hinges and refixing of loose sliding bolts/tower bolt/handle, refixing of loose Palmet & curtain rod/brakets, easing of doors/ windows /cup boards and repair in same position & including providing all type of screws, nails, timber beading, fevicol and necessary small items as per site requirement with necessary tools & plant and made functional to entire satisfaction complete all as specified and directed.
Attending mason complaints and rectifying defects (i.e. broken wall, floor, plinth protection, plaster, refixing of tiles etc in patches, each job requiring cement not more than 2 Kg for each complaint as per site requirement, including provision of sand & aggregate as required with necessary tools & plant complete made functional to entire satisfaction complete all as specified and directed. Note for item Nos 71.00, 72.00 and 73.00: Mason and carpenter complaints shall be attended and rectified within 72 Hours & plumber complaints shall be attended and rectified within 48 Hours of handing over of complaint slip. However, certain complaints, if declared as urgent by the Engineer in Charge, shall be attended and rectified by the contractor on the same day. Violation of this timeline shall attract a penalty of Rs. 250.00/Per complaint per day on the contractor.
Taking down chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 Sqm each & removing to or from store complete all as specified and directed.
Taking down chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 Sqm but n. exc. 4.00 Sqm each & removing to or from store complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each removing from site complete all as specified and directed.
M&L for framed work as in doors or gates of angles or other section with gusset plates, rails braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (excluding of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing, conforming to Fe-290 Grade-E-165, complete all as specified and directed.
S&F 35mm thick factory made IInd Class Hard wood (Hollock/sal) paneled door shutters single panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.
S&F 35mm thick factory made IInd Class Hard wood (Hollock/sal) glazed and skeleton, open rebated, prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered and rounded, fitted with cut and mitered beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- S & F glass/gauge shall be measured and paid for separately.
S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as applicable to item 08095 given in SSR Part – II (2020).
S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part–II.
S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: framed guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works conforming to Fe-290 Grade-E-165, complete all as specified and directed.
S&F steel windows or ventilators, fixed type with glazing bars & including one shop coat of zinc chromate primer complete all as specified and directed.
S&F for 150 mm mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed complete all as specified and directed.
S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed.
S & F mild steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed.
S&F in renewal of 300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.
S&F mild steel bow handles, oval type, stove enamelled black 150 mm long, complete all as specified and directed.
S&F 300 mm long mild steel sliding door bolt clip type stove enamelled black with bright bolt not less then 12 mm dia and incl a minimium of 6 bolt & nuts, four on bolt plate and two on staple plate complete all as specified and directed.
M & L for preparation of new or previously untreated wooden surfaces, exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer, complete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chromate primer, complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.56 mm nominal bore of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S&F in renewal of flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, complete all as specified and directed.
S&F in renewal of stainless steel glass to glass door hinges suitable for toughened glass complete all as specified and directed.
S&F in renewal of stainless steel toilet paper holder, fixed on wall with SS screws including PVC washer and dash fastener, complete all as specified and directed.
S&F in renewal of vitreous china half stall type urinals, bowl type, flat back of size 465x355x265mm, white with grating and union for discharge pipe, including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back with white cement, complete all as specified and directed.
Fixing only in renewal of 15 mm bore ball valve of any type with float and fly nut, screwed down, screwed for 15mm bore iron pipe and fixed, complete all as specified and directed. Note: Ball valves shall be issued under Schedule 'B' free for fixing.
Fixing only in renewal of 20 mm bore ball valve of any type with float and fly nut, screwed down, screwed for 20mm bore iron pipe and fixed, complete all as specified and directed. Note: Ball valves shall be issued under Schedule 'B' free for fixing.
Fixing only in renewal of low level PVC flushing cistern of 10 Litres capacity, complete all as specified and directed. Note: Low level flushing cisterns shall be issued under Schedule 'B' free for fixing.
Fixing only in renewal of towel ring of any type, fixed with PVC rawl plug and stainless steel screws, complete all as specified and directed. Note: Towel ring shall be issued under Schedule 'B' free for fixing.
Fixing only in renewal of tubular towel rail, 20mm dia, D type, 60cm long between flangess, complete all as specified and directed. Note: Tubular towel rail shall be issued under Schedule 'B' free for fixing.
Fixing only in renewal of 15 mm bore pillar taps of any type, screwed down, screwed for 15mm bore iron pipe and fixed, complete all as specified and directed. Note: Pillar taps shall be issued under Schedule 'B' free for fixing.
Fixing only in renewal of soap dish of any type, fixed with PVC rawl plug and stainless steel screws, complete all as specified and directed. Note: Soap dish shall be issued under Schedule 'B' free for fixing.
Fixing only in renewal of 15 mm bore stop valve of any type, screwed down, screwed for 15mm bore iron pipe or for brass ferrule and fixed, complete all as specified and directed. Note: Stop valves shall be issued under Schedule 'B' free for fixing.
Fixing only in renewal of sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each, complete all as specified and directed. Note: Kitchen sinks shall be issued under Schedule 'B' free for fixing.
Fixing only in renewal of sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; exceeding 0.5 sqm each, complete all as specified and directed. Note: Kitchen sinks shall be issued under Schedule 'B' free for fixing.
Fixing only in renewal of Mixing valve (any type) including three joints to steel pipes or unions and plugging and screwing to walls, complete all as specified and directed. Note: Mixing valve shall be issued under Schedule 'B' free for fixing.
Fixing only in renewal of waste coupling of any type (half or full threaded) complete all as specified and directed. Note: Waste coupling valve shall be issued under Schedule 'B' free for fixing.
M/s Prem Associates
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .