18/EDCB/2025-26

Amount

The work of safe carriage of the following material from CB Ganj store center to work site under the jurisdiction of EDD-Aonla, Bareilly Approx. distance upto 100 Km. Including safe loading and unloading.

PCC Pole 8.5 Mtr

PCC Pole 11 Mtr

ACSR Weasal

AB Cable 3x50 sqmm

AB Cable 3x95 sqmm

AB Cable 3x120 sqmm

11 KV XLPE 3x300 Sq Mm

Outdoor 11 KV Jointing Kit Sutable for 11 KV XLPE Cable 3x300 sqmm

11 KV VCB (Outgoing)

Indoor Earthing VCB

Other Line material

Erection/Installation of following new panel (VCB) in control room including grouting of Anchor bolt of Panel and making/repairing of pocket for cable to insert in panel from trench and fixing, taping of bus bar with wiring for PT. AC, DC connection including providing of AC & DC Supply.

11 KV VCB (Outgoing)

Indoor Earthing VCB

Providing cutting, fixing and welding of MS Strip from existing, earthing to new 11 KV/33KV VCB Complete in all respect, all material shall be arranged by the Contractor.

Erection of Single/Double pole in H.T/L.T lines including fitting of all accessories as per RESSPO Norms

PCC Pole 8.5 Mtr (Single)

PCC Pole 11 Mtr (Single)

Grouting of following Pole with 1:4:8 mixture in size(450x450x1500mm.) including cost of cement/BB & sand Required as per RESSPO Norms

PCC Pole 8.5 Mtr (Single)

PCC Pole 11 Mtr (Single)

The work of Driving the earthing electrode and making connections with 6 S.W.G. GI wire as per RESSPO Norms

Dismentaling of Old/Jarjar wire as per norm complete in all respect

Laying, Stringing & Sagging of Following Conductor complete in all respect

ACSR Weasal

AB Cable 3x50 Sq mm

AB Cable 3x95 Sq mm

AB Cable 3x120 Sq mm

The work of digging of pits, erection of Stay Clamp, Insulator etc.

Grouting of stays, 1:4:8 cc ratio (600x600x300mm.) as per RESPO norms.

Fixing of 3 Phase Distribution Box

Construction of T/F plinth 2x2x1 m3 for mounting 250 KVA T/F including foundation work (below ground 0.5 M), Brick work, RCC slab of 4” thickness and plastering in 1:6 ratio with 02 Nos channel pieces of 1.5 mtr long of size 100x50x6 mm compete in all respect

Cage fencing of 250 KVA Plinth mounted transformer in Town areas to avoid electrical human/cattle accidents by fabrication of cage (1 Inch Sq wiremesh) made of 10 No gauge in suitable size angle iron frame of size 7.5'(L)x5'(W)x8’(H) by strenghtening of wire mesh 20x3 mm M.S. flat haorizentally as well as vertically, Grouting the panel with 1:2:4 cement/coorse send/brick ballast. The Frame should be bolted on angles at the four corners so that frame may be un-bolted/bolted at the time of replacement of the transformer. Provision of 1 gate should be there for maintenance of the transformer. Painting (1 coat of red oxide + 2 coat of Bus green enamel paint). The wire mesh should be earthed with 50x6 mm MS earthing strip with existing earthing of Transformer Body. All men, material and T&P provided by the contractor to complete the fabrication, transportation and installation.

Delta Earthing of Power Tranformers installed at Various 33/11 KV S/s as per norms complete in all respect. To complete the work Contractor will provide all material, Manpower, T&P, safe carriage of material to worksite. Above work will be carried out under supervision of concerned JE/SDO/EE)

Sub Station Tranformers & Outgoing Double Pole Earthing at Various Places as per norms complete in all respect. Above work will be carried out under supervision of concerned JE/SDO/EE) Pipe Earthing of Transformer (By boring of 4 inch diameter 20 m deep, 40 mm diameter A class GI pipe is inserted to a depth of 20 m and a holed pipe of 1.5 m length is inserted at the bottom. Tighten one end of the MS strip of size 50x6mm with the nut bolt with the neutral of the converter and weld the other end with the GI pipe inserted in the boring for earthing. Putting a socket on the upper part of the pipe (mouth) so that water can be poured into it to retain moisture. To complete the work Contractor will provide all material, Manpower, T&P, safe carriage of material to worksite.

Gaurding at Road Crossing Complete in all respect

Under Ground Laying of 11 KV XLPE Cable 3x300 sqmm in Double Circuit as per norms complete in all respect

Laying of 11 KV XLPE Cable 3x300 Sq Mm in the air

Filling of 11 KV Outdoor Cable Jointing Kit complete in all respect

Road Restoration of Pakka Road

PROVIDING AND FIXING OF DEFECTIVE 11 KV CURRENT TRANSFORMER 600/300/5 A & 800/400/5 A

PROVIDING AND FIXING OF DEFECTIVE 11 KV CURRENT TRANSFORMER 400/200/5 A & 300/150/5 A

PROVIDING AND FIXING OF DEFECTIVE 11 KV PANEL O/C+ E/F IDMT RELAY WITH RETROFITTING ARRANGEMENT

PROVIDING AND FIXING OF DEFECTIVE 11 KV PANEL MASTER RELAY WITH RETROFITTING ARRANGEMENT

PROVIDING AND FIXING OF DEFECTIVE HT HRC FUSE FOR PT OF APPROPRIATE RATING of 11 KV VCB

PROVIDING AND FIXING OF DEFECTIVE HRC FUSE OF DIFFERENT RATING of 11 KV VCB

PROVIDING AND FIXING OF MECHANICAL SYSTEM FOR PROPER OPENING, CLOSING & TRIPPING OF 11 KV BREAKER

REPLACEMENT AND SUPPLY OF DEFECTIVE/BURNT MCB OF APPROPRIATE RATING of 11 KV VCB

REPLACEMENT AND SUPPLY OF DEFECTIVE/BURNT AUXILLARY SWITCH OF APPROPRIATE RATING of 11 KV VCB

REPLACEMENT AND SUPPLY OF DEFECTIVE ANTIPUMPING RELAY of 11 KV VCB

REPLACEMENT AND SUPPLY OF DEFECTIVE SPOUT of 11 KV VCB

REPLACEMENT AND SUPPLY OF DEFECTIVE BUSBAR AS PER REQUIREMENT/DRAWING of 11 KV VCB

REPLACEMENT AND SUPPLY OF DEFECTIVE JAW FOR 11 KV VCB TROLLEY

REPLACEMENT & SUPPLY OF DEFECTIVE INDICATOR of 11 KV VCB

REPLACEMENT & SUPPLY OF DEFECTIVE AMPERE METER of 11 KV VCB

REPLACEMENT & SUPPLY OF DEFECTIVE VOLT METER of 11 KV VCB

REPLACEMENT & SUPPLY OF DEFECTIVE TNC SWITCH of 11 KV VCB

REPLACEMENT & SUPPLY OF DEFECTIVE LOCAL/ REMOTE SWITCH of 11 KV VCB

REPLACEMENT & SUPPLY OF DEFECTIVE BUZZER of 11 KV VCB

REPLACEMENT & SUPPLY OF DEFECTIVE CLOSING COIL (24 VDC) of 11 KV VCB

REPLACEMENT & SUPPLY OF DEFECTIVE TRIPPING COIL (24 VDC) of 11 KV VCB

REPLACEMENT & SUPPLY OF DEFECTIVE VACCUM INTERRUPTOR AS PER SITE REQUIREMENT of 11 KV VCB

REPLACEMENT & SUPPLY OF DEFECTIVE TNC SWITCH of 11 KV VCB

SERVING AND REPAIRING OF ELECTRICAL SYSTEM FOR PROPER METERING, OPENING, CLOSING & TRIPPING OF 11 KV BREAKER INCLUDING PROVIDING OF NECESSARY INTERNAL WIRING, LUGS, FERRULES OF APPROPRIATE RATING AND COLOUR CODING AND OTHER NECESSARY ACCESSORIES BATTERY AND BATTERY CHARGER OVERHAULING & MAINTENANCE.

REPARING AND OVERHAULING OF 33 KV VCB 1250 A INCLUDING REPLACEMENT OF BURNT/DAMAGE WIRING, TRIPPING/CLOSING COIL, LIMIT SWITCH, T&C SWITCH, ETC.

SUPPLY AND REPLACEMENT OF 33 KV INTRRUPTOR (1650 A) AS PER SITE REQUIREMENT

REPAIRING OF 33 KV SINGLE/DOUBLE FEEDER CONTROL PANEL INCLUDING REPLACEMENT OF BURNT WIRING, FUSE, MCB INCLUDING MATERIAL

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE O/C+E/F IDMT RELAY WITH RETROFITTING ARRANGEMENT SUITABLE FOR 33 KV DOUBLE/SINGLE FEEDER PANEL AS PER SITE REQUIREMENT.

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE MASTER TRIP RELAY WITH RETROFITTING ARRANGEMENT SUITABLE FOR 33 KV DOUBLE/SINGLE FEEDER PANEL AS PER SITE REQUIREMENT.

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE AUXILLARY RELAY WITH RETROFITTING ARRANGEMENT SUITABLE FOR 33 KV DOUBLE/SINGLE FEEDER PANEL.

SUPPLY & REPLACEMENT OF DEFECTIVE CLOSING COIL AS PER SITE REQUIREMENT.

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE TRIPPING COIL

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE CONTROL CABLE FORM PANEL TO 6*2.5 SQMM ARMOURED CABLE

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE TNC SWITCH

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE CONTROL CABLE FORM PANEL TO VCB 2*2.5 SQMM ARMOURED CABLE

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE CONTROL CABLE FORM PANEL TO 4*2.5 SQMM ARMOURED CABLE

33 KV SUPPLY & REPLACEMENT OF VCB CHARGING MOTOR OF APPROPRIATE RATING

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE/BURNT MCB OF APPROPRIATE RATING

SUPPLY & REPLACEMENT OF DEFECTIVE/BURNT AUXILLARY SWITCH OF APPROPRIATE RATING

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE ANTIPUMPING RELAY

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE LED INDICATOR

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE AMPERE METER

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE VOLT METER

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE LOCAL/REMOTE SWITCH

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE BUZZER

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE WTI

33 KV SUPPLY & REPLACEMENT OF DEFECTIVE OTI

SUPPLY & REPLACEMENT OF DEFECTIVE MAGNETIC OIL GAUGE OF POWER TF

Supply and Fixing of Following Material as per RESPO norms complete in all respect (would be Provided by contractor through approved vendors of Discom at his own cost)

LT Pole Clamp N& B For PCC Pole

Suspension Clamp

J Hook

Eye Hook

Dead End Clamp

Stone Pad 300x300x75 mm

Holding Clamp for T Off, Cross Arm and Expouser Pole

PG Clamp

Stay Clamp

Stay Insulator

Earthwire Clamp

Piercing Connector

X Arm Holding Clamp with Nut & Bolt

11 KV F Clamp with N&B

Number Plate with Clamp and Nut &Bolt

Danger Board

Barbed Wire

N&B Washer All Size

Eye Bolt For Guard wire

MS Nut Bolt with washer

Cable Route Marker

11 KV E-Bracket

Safe back carriage of Following item (if any) from work site to C.B. Ganj store Bareilly approx distance upto 100 Km including loading & unloading.

Scrap

M/S HINA ELECTRICALS (BID ID -5536549)

M/S RAHAT & BROTHERS ELECTRICALS (BID ID -5536274)