DEVELOPMENT OF NUCLEAR MEDICINE WARD

Amount

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Wall painting with High washable acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. (As per CPWD Specification)

12.5 mm thick tapered edge gypsum moisture resistant board (As per CPWD Specification)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (Sal wood)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing storage Cabinets on wall made of 19mm commercial ply, the top and front and external sides shall be laminated with 1.5 mm (merino, century ) laminate and all the rest exposed surfaces polished with spirit polish with drawers and shutter of drawer unit fixed on hinges, drawer channels , locks etc all complete inclusive of all hardware, bottom Support etc. Overhead cabinet of size 5' (L) X 8' (H) X 1'6" (D).

Supply & installation of manual recliner chair

Providing and fixing Working table made of 19mm commercial ply, all sides shall be laminated with 1.5 mm (merino, century ) laminate and all the rest exposed surfaces polished with spirit polish with drawers and shutter of drawer unit fixed on hinges, drawer channels , locks etc all complete inclusive of all hardware, bottom Support etc. Overhead cabinet of size 5'(L) X 2'6"(B) X 2'6"(H)

2mm Thick lead lining in Post Patient Waiting Areas as per AERB

Water proofing of wet area Providing and sealing pipe penetrations by cementitious grout with epoxy bond compound of approved brand & manufacture, as per manufacturer specification. Providing and applying two coats of acrylic polymer modified cementitious water proof coating of approved brand & manufacture which shall contain a liquid polymer component and a cementitious powder components which shall be mixed as per manufacturer’s instruction and applied over prepared concrete /masonry surface strictly maintaining the coverage specified by the manufacturer. Coating shall have Adhesion to concrete greater than 1 n/mm2 and static crack accommodation of 1 mm. Sprinkle coarse sand over final coat of coating when coating is still wet to facilitate in bonding with protection layer. The rate must include the cost of materials, labour for necessary surface preparation and application etc. complete. Proving & laying of protective plaster 20 mm thick cement plaster 1:3(1 cement :3 sand) admixed with integral waterproofing compound in recommended proportion coated surface. Surface area shall be measured for payment.

Core cutting of RCC slab / wall wherever required

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.

Providing and laying flamed finish/ polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Polished finish granite stone slab Cherry Red, Elite Brown, Cat Eye or equivalent

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing water Jet Nozzle with hose pipe and haif turn CP brass angle valve to be fitted with seat cover of european water closet complete in all respect of approved quality

Providing and fixing soap tray with CP brass lid and brackets fixed to wooden cleats with CP brass screws.(Jaquar model no.1131 or equivalent model of other approved make).

Providing and fixing CP brass towel rail size of 600x20 mm of approved make complete with CP brackets fixed to wooden cleats with CP brass screws(Jaquar model no.1111 or equivalent model of other approved make)

Providing and fixing brass coat hook of approved quality and make complete with material of fixing

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm

Providing and fixing water shower for bath with hot & cold water arrangement and wall mixer fixing all complete in all respect of approved quality

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing & fixing SS floor trap grating 143x143x5mm thick screwable with SS fixed frame of 150x150 mm size as per approved make & model

Providing and laying Laboratory/hospital effluent waste pipe and fitting of high density polyethelene (HDPE),CLASS -PE 80 ,pressure rating PN-6,conforming to IS :4427, electric fusion joints/flanged joints , fittings which includes bends,,junctions,cowls,offsets,access pieces.etc. complete including jointing. 110 mm dia

Providing and fixing floor drain points formed out of 65 mm dia GI elbow, including with 75mm dia Stainless Steel grating with frame, embedded in floor, all complete as directed.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal dia Pipes

Supplying, fixing, testing and commissioning of storage type water heater (Geyser) etc. with Stainless steel body , copper container , automatic thermostatic control electric element, pressure release valve, M.S. nuts and bolts etc. conforming to IS: 2082 25 Litre Capacity

Stainless Steel Sink in Hot Lab with elbo operated tap to be provided with water connection, waste water dainage, counter to mount sink etc all complete in all respect as per direction and approval of EIC

Supply and fixing a RO+ Cooler of approved brand with all required materials

Wiring for light point/fanpoint with 1.5 sq.mm. PVC insulated, fire retardant low smoke (FRLS) copper conductor cable, single core/ multi strand, in medium class PVC conduit (Including supplying & surface/recess laying of PVC conduit and accessories) including the following and complete as required.Supplying and Fixing Modular type switches in suitable size modular metal boxes, base plate & modular cover plates, space for fixing electronic fan regulator in case of fan point wiring & space for fixing 5A socket on the board etc.Note :i) Unless otherwise specified all the conduiting work to be done in recess Point wiring as mentioned above Group C

Wiring for Submain/ circuit wiring with following size of PVC insulated FRLS copper conductor single core/multi strand cable in surface/recessed medium class pvc conduit (including supply & laying of recessed conduit) as required.2X2.5 Sqmm with 1 No. 2.5 sqmm PVC FRLS insulated, copper conductor for earthing. (For Lighting Subcircuit)

Wiring for Submain/ circuit wiring with following size of PVC insulated FRLS copper conductor single core/multi strand cable in surface/recessed medium class pvc conduit (including supply & laying of recessed conduit) as required.2X4 Sqmm with 1 No. 4 sqmm PVC insulated FRLS copper conductor for earthing. (For Combo power point 1 nos 16 A and 2 nos 6amp)

Supplying and fixing suitable Module GI box in recess including providing and fixing 3 pin 5/6 amps. modular socket outlet with shutters and 5/6 amps. modular type switch with indicator type, base plate, modular cover plate, connections etc. and all civil works 'complete as required.

Supply of following light fixture with high efficiency electronic ballast, starter, tubes/lamps, capacitor, reflector, diffuser, MS body/housing holder etc. complete with all fixing accessories as required.1X28 watt box type LED light fixture (Philips Mirolta Slim T5 TMS540 HF or approved equivalent) (136bw )

Supply of following light fixture with high efficiency electronic ballast, starter, tubes/lamps, capacitor, reflector, diffuser, MS body/housing holder etc. complete with all fixing accessories as required.LED recessed flush mounted down light fixture (Philips DN194B LED 15S -4000PSU WH or approved equivalent )

Supply and installation of following ceiling fans (BEE -5 Star Rated) complete with double ball bearing, motor, blades, downrod, canopies, capacitor, modular type electronic fan regulator, suitable for operation on 230 volts, 50 Hz., 1 phase, AC supply complete as required.1200 mm sweep

Supplying drawing, connecting and testing of 0.5mm dia annealed copper conductor PVC insulated PVC sheathed telephone Wire/cables in recessed PVC conduit or a racks as required. 2 pair Telephone cable. (0.5 mm)

Supply, fixing, connecting and testing of telephone modular sockets modular plate anodised MS box and blanking plate in surface / recessed including connectionetc as required. Telephone socket outlet (RJ-11 telephone Jack Single with Shutter)

Supply,Installation Testing and Commissioning of 8 way Wireless Microprocessor controller Nurses call panel with terminal monitor with in built power supply , with charger enclosed in a powder coated cabinet . Having with Reset, alarm/ buzzer, Call acknowledge with battery back up, battery charger complete system as per technical specifications and as required of following suitable configuration.

Supply and Wiring for Submain/ circuit wiring with following size of PVC insulated FRLS copper conductor single core/multi strand cable in recessed PVC conduit (including supply & laying of pvc conduit) as required.4X16 Sqmm with 2 nos 6 sq mm PVC insulated FRLS copper conductor for earthing.

Supplying & fixing following way, vertical type TPN MCB distribution board, 415 volts,on recess/surface complete with loose wire box, terminal blocks, tinned copper busbar, neutral link, earth bar,din bar, detachable gland plate, interconnections, phosphatized and powder coated including earthing connection bolt etc.8 way (4+24), Double door

Supplying & fixing following rating, four pole, 415 volts, 40 amps Miniature Circuit Breaker (MCB),in the existing MCB DB complete with connections, testing & commissioning etc. as per technical specifications and as required.

Supply, installation, testing and commissioning of horizontal type sheet metal ceiling suspended FCU's each complete with 3 row deep chilled water cooling coil/1 row deep heating coil of copper tubes aluminium fins construction, centrifugal fan, 3 speed motor, aluminium cleanable filters insulated condensate drain pan, coil piping connections, condensate drain connection, 2 way motorised cum automatic balancing valves provided with spring return function & fitted with modulating actuators in chilled water lines at each fan coil unit. The actuator shall have required shut off capability of minimum 4 bar rating and should be able to accept 24V power supply.The valves and actuator shall be compatible with BMS complete vibration isolator, wiring complete as required, with ball valve, ball valve with strainer as required as per specification & drawings with the following capacities:- 2 TR

Supply, installation, testing and commissioning of horizontal type sheet metal ceiling suspended FCU's each complete with 3 row deep chilled water cooling coil/1 row deep heating coil of copper tubes aluminium fins construction, centrifugal fan, 3 speed motor, aluminium cleanable filters insulated condensate drain pan, coil piping connections, condensate drain connection, 2 way motorised cum automatic balancing valves provided with spring return function & fitted with modulating actuators in chilled water lines at each fan coil unit. The actuator shall have required shut off capability of minimum 4 bar rating and should be able to accept 24V power supply.The valves and actuator shall be compatible with BMS complete vibration isolator, wiring complete as required, with ball valve, ball valve with strainer as required as per specification & drawings with the following capacities:- 4 TR

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80 kg/cum density resin bonded fiber glass pipe section insulation covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints and repairing of damage to building etc. as per specifications and as required. Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.80 mm dia (50 mm insulation)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80 kg/cum density resin bonded fiber glass pipe section insulation covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints and repairing of damage to building etc. as per specifications and as required. Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.65 mm dia (50 mm insulation)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80 kg/cum density resin bonded fiber glass pipe section insulation covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints and repairing of damage to building etc. as per specifications and as required. Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.50 mm dia (50 mm insulation)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80 kg/cum density resin bonded fiber glass pipe section insulation covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints and repairing of damage to building etc. as per specifications and as required. Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.40 mm dia (50 mm insulation)

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.0.80 mm (22 G) GSS 120 GSM

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. (For fresh air supply)

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class "O") insulation on existing duct after applying two coats of cold setting adhesive (CPR X compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.19 mm

Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends,tees etc.but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. Note:-The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.100 mm dia

Supplying and fixing of following thickness duly laminated of mat finish closed cell Nitrile rubber (class "O") insulation on existing duct after applying two coats of cold setting adhesive (CPR X compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.19 mm

DISTRIBUTION PIPING (Indigenous) Medical graded Copper pipes shall be solid drawn, tempered, seamless, phosphorous deoxidized, non-arsenic and degreased for oxygen service. The chemical composition shall be as per BS-6017: 1981 Table 2, Cu-DHP grade. Distribution Copper Pipe manufactured as per BSEN:13348 :2008 complete with dew point apparatus and carbon monoxide monitoring facility as per specifications. 22m ODx 0.9mm thk

DISTRIBUTION PIPING (Indigenous) Medical graded Copper pipes shall be solid drawn, tempered, seamless, phosphorous deoxidized, non-arsenic and degreased for oxygen service. The chemical composition shall be as per BS-6017: 1981 Table 2, Cu-DHP grade. Distribution Copper Pipe manufactured as per BSEN:13348 :2008 complete with dew point apparatus and carbon monoxide monitoring facility as per specifications. 15mm ODx 0.9mm thk

ALARM Alarm Panel to indicate any abnormality of gas pressures and other failures of the system. The alarm system shall be complete with digital display, sensor module and power supply. The alarm shall be complete with all indications controls, wirings, accessories etc. complete as required and as per specifications. 2 Gas Capacity

ACCESSORIES Oxygen Flowmeter with Humidifier (Imported)(0-15 litres/minute) with adapter, tubing etc. complete with all the required accessories and shall be complete as per specifications

ACCESSORIES Ward Vacuum Unit wall mounted type complete with all accessories as required and as per specifications.

Supply, installation, testing and commissioning of Automatic Analog addressable Photoelectric smoke detector with mounting Base,alarm LED . The Detector shall have automatic Electronic /dip switch addressing feature & each of these shall be equipped with fault Isolator/ External Fault Isolator complete with the GI Mounting Box and the hardware etc. as required. (UL / EN/ VDS Approved).

Supply, installation, testing and commissioning of Addressable Fire Control module complete as required

Supply, installation, testing and commissioning of Dual LED Response indicator for on surface/recesssed MS Box indicating the activation of the Remotely located Detector.

Supply, Installation, Testing and Commissioning of Ceiling Speaker 1.5/3/6 watt dual cone spring loaded mounting clamps, SPL 90 dB, Freq response 80-15000 Hz, rated input voltage 100 Volts.complete as required.

Supply and drawing of speaker cable two pair 2 C x 1.5 Sq.mm. PVC insulated copper Conductor FRLS cablein existing M. S. Conduit, Complete with termination and testing as per requirement.

Supply and laying of following size of 25 mm dia M.S, Conduit pipe in recess including all accessories MS pull/junction boxes, GI fish wire of 6 SWG, fixing hardware etc., including cutting, chasing the walls/floor and plastering the chased portion and making good the damages etc., complete as required.

Supply and drawing of 2 C x 1.5 Sq.mm. Sheathed anneled flexible copper Conductor FRLS cablein existing M. S. Conduit, Complete with termination and testing as per requirement.

PAUL ENTERPRISE

BINOD