PROPOSED CONSTRUCTION OF LIBRARY BUILDING AT VERATH VILLAGE, TA: MANDVI ,DIST.SURAT

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

1 Excavation for foundation upto 1.5 m depth including 139.50 CMT. 122.93

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. (A)

Loose or soft soil ( I ) 0 To 1.5 mt. Depth

2 Excavation for foundation upto 1.5 m to 3.0 m depth 34.00 CMT. 136.47

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

Meter lead. (A) Loose or soft soil ( II ) 1.5 To 3.0 MT

3 Filling available excavated earth (Including rock in 147.50 CMT. 136.91

trenches plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering)

4 Providing & filling in plinth with murrum or yellow soil 39.00 CMT. 301.77

watering, ramming & consolidation etc. complete.

5 Filling in plinth with sand under floors including 13.00 CMT. 481.80

watering ramming, consolidating and dressing

complete (A) Foundation and plinth

6 Providing and laying cement concrete 1:2:4 (1-Cement : 22.50 CMT. 3923.85

2- coarse sand : 4- hand Machine crushed stone

aggregates 40 mmnominal size) and curing complete

including cost of formwork in (A) PCC

7 Providing and laying controlled cement concrete M.250 17.00 CMT. 4494.50

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in foundation, footings base of column

and mass concrete. (A) Footing

8 Providing and laying controlled cement concrete M.250 4.00 CMT. 8226.45

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column,

Pillers, posts and struts , upto Plinth

9 Providing and laying controlled cement concrete M.250 7.50 CMT. 8246.27

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column,

Pillers, posts and struts, upto All Floor.

10 Providing and laying controlled cement concrete M.250 7.00 CMT. 6440.77

and curing complete inculding the cost of formwork

but Excluding the cost of the cost of reinforcement for

reinforced concrete work in Beams. (E) Beam, upto

11 Providing and laying controlled cement concrete M.250 8.00 CMT. 6460.59

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Beams,(E) Beam, upto All

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

12 Providing and laying controlled cement concrete M.250 16.00 CMT. 6407.06

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Types of Slab,All Thickness (C)

Slab upto Plinth and upto All Floor.

13 Providing and laying controlled cement concrete M.250 0.50 CMT. 6794.27

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in All Thickness in Walls PARDI All

14 Providing and laying controlled cement concrete M.250 1.50 CMT. 6005.08

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in Lintel upto All Floor.

15 Providing and laying controlled cement concrete M.250 1.00 CMT. 6223.24

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in Chajja. upto All Floor.

16 Providing and fixing TMT bars Fe-500D steel 6302.50 Kg . 78.78

reinforcement for R.C.C. work including binding,

bending and placing in position complete upto floor two

level ,Ground Floor, First Floor , Second Floor, Third

Floor, Terrace Floor (all floor).

17 Carring out plinth treatment to post construction / 129.00 SMT. 124.28

existing structure by spraying chemical solution for

termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene

and Chiorpurfiles 20 EC. As Per 6131_paret-II

Consentration Weight one percent is recommended i.e

one litre 20 EC chemical emulsion with 19 liter give

% concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical /

of surface is recommended as per I.S

18 Brick work using common brunt clay building bricks 40.50 CMT. 4524.80

having crushing strength not less than 35 kg/sqcm. in

foundation and plinth in cement mortar 1:6 (1 cement :6

fine sand) etc.comp. (B) Conventional All Floor

19 Half brick masonry in common brunt clay building 8.50 SMT. 688.82

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in (B) Conventional All Floor

20 Providing 15mm thick cement plaster in single coat on 260.50 SMT. 173.72

Rough (Similar)side of single or Full/half brick walls

for interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-

sand) All Floor

21 Providing & laying10 mm. thick cement plaster in 129.00 SMT. 159.58

single coat on fair side of ceilings for interior plastering

upto floor two level and finishing with smooth mala

plaster.(i) Cement mortar 1:4 (1 cement : 4 sand) All

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

22 20mm thick sand faced cement plaster on walls upto 234.00 SMT. 315.68

height 10 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete. Upto All Floor

23 Providing throating or plaster drip and moulding to 16.00 RMT. 44.27

R.C.C. Chhajja.

24 Providing 20 mm deep finished groove in plaster in line 16.00 RMT. 35.35

and level etc. Comp. For all Floor

25 Providing and laying polished Granite Slab 18mm thick 6.50 SMT. 2377.54

in Flooring laid 20mm thick Cement Mortar 1:4 (1-

Cement : 4-Coarse Sand) and jointed with Grey Cement

Slurry including full molded round front edges , rubbing

and polishing etc. complete.

26 Providing and laying polished Granite Slab 18mm thick 27.00 SMT. 2408.85

in Risers of steps Dedo, window sill, jembs and pillars

laid 10 mm thick Cement Mortar 1:4 (1-Cement : 4-

Coarse Sand) and jointed with Grey Cement Slurry

including full molded round edges , rubbing an

27 Providing and laying Vitrified tiles 8 to 10 mm thick , 108.50 SMT. 1120.36

24'' x 24'' in flooring treads of steps and landing laid on

a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white

cement. PVT. Tiles in All Rooms.

28 Providing and laying Vitrified tiles 8 mm thick , 24'' x 35.00 SMT. 1195.02

24'' in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry Soluble Salt PVT. Tiles

in All Rooms.

29 Providing and fixing 37 mm thick flush door both sides 8.50 SMT. 4230.89

laminated andshutter fabricated from 35 mm thick solid

core malemine faced three layered pre laminated flat

pressed wood based exterior grade bonded BWP/BWR

synthetic resin having stamped IS 12823 gra

30 Providing and fixing FRP frame size 125x65 mm and 3.50 SMT. 2615.04

35mm thick FRP shutter having extra reinforcement on

sides & edges in polish finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam

done in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole

FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are

to be inclusive of S.S hinges with necessary screws &

alluminium S.S fixtures & fastenings & fastener sleeve.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

31 Providing and fixing window having extruded aluminum 7.50 SMT. 1583.95

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal

Three track member size 92mm x 31.75mm x

1.30mm,@ Wt.1.07 Kg/mt , vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with

sliding shutters of horizontal member size

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing

to frame as per details etc

32 Providing and fixing window having extruded aluminum 5.63 SMT. 1713.69

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing

to frame as per details etc complete for window.

33 Providing and fixing standared extruded of alluminium 3.00 SMT. 1175.55

section of size 63mm x 38.10mm x 1.2mm (Wt.

Kg/mt) with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

34 Providing and fixing M.S. grill of required pattern of 125.44 Kg. 117.16

windows etc. with M.S.. flats at required spacing and

frame alround square or round headed bolts and nuts or

by screws.including applying a priming coat of red lead

paint and two coats of oil painting

35 Applying two coats of Birla (white cement based) or 260.50 SMT. 124.94

(acrylic lapy- putty) or equivalent & two coats of primer

of approved brand and manufacture on new wall surface

to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth. with Wall painting

(three coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to

give an even shade including throughly brushing the

surface free from mortar droppings and other foreign

matter and sand papered smooth.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

36 Applying two coats of Birla (white cement based) or 129.00 SMT. 130.63

(acrylic lapy- putty) or equivalent & two coats of primer

of approved brand and manufacture on new Ceiling

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. Ceiling

painting (three coats) with plastic emulsion paint of

approved brand and manufacture on undecorated Ceiling

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

37 Finishing wall with weather proof exterior emulsion 234.00 SMT. 160.59

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered

materials.etc complete. Priming: Apply a liberal coat of

exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended. Minimum 4-6

hours duration is required between each coat of

weather shield max paint

38 Applying priming coat over new steel and other metel 2.50 SMT. 128.62

surface after and including preparing the surface by

throughly cleaning, oil,grease, dirt and other foreign

matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming paint

brushing red lead. and Painting two coats (excluding

priming coat) on new steel and other metal surface with

enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign

39 Steel work welded in built up sections, framed work 0.11 Quintal 9108.48

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint :-

(A) In beams and joints channels angles, column, tees,

flats with connecting plates or angle cleats as in

40 Providing and laying cement concrete flooring 1:2:4 129.00 SMT. 339.07

(1cement : 2-coarse sand : 4-graded stone aggregate

20mm nominal size) laid in one layer and finished with a

floating coat of neat cement. (B) 50mm thick.

41 Providing and laying broken chine mosaic flooring 129.00 SMT. 779.69

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out

upto surface using

42 Providing and fixing Stainless Steel railing having 50 4.00 RMT. 3101.71

mm dia hollow stainless steel pipe as hand rail and

mm dia hollow stainless steel pipe with combination of

10 cm long 16mm dia pipe as per virtical supports

mm dia hollow stainless steel pipes H

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

43 Providing and fixing wash down water closet (European 2.00 No 4327.52

type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) (Seal and cover to be measured

and paid for separately)(A) vitreous China Pattern :(i) in

white colour, Providing and fixing 12.5 Litres low level

flushing cistern with a pair, of C.I. or Mild brackets,

complete with fittings such as lead valve less syphon,

15mm nom.nal size brass ball valve with polythene

float, C.P brass handle unions and couplings for

connections, with inlet, outlet and overflow pipes, 40mm

dia.porcelain enamelled flush bend including cutting

holes in walls and making good the same connecting the

flush bend with cistern and closet (overflow pipe to be

measured and paid for separately)(A) Vitreous China (I)

In white colour, Providing and fixing plastic seat and

cover for wash down water closer with C.P. brass hinges

and rubber buffers. (B) Black plastic seal and cover,

With Jet spray heavy duty with S.S. Braided hose 60 cm

44 Providing and fixing washbasin with single hole for 2.00 No 2461.70

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the Providing

and fixing C.P. brass waste for washbasin or sink. (A)

32mmdia.,Providing and fixing pillar tap,

45 Providing and fixing PVC SWR Nahni trap IS 14735 for 4.00 No 599.63

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

46 Providing and fixing screw down bib taps of following 4.00 No 186.82

size.(A) Brass screw down bib tap polished bright. (i)

47 Providing and fixing Urinal or approved quality 1.00 No 1348.60

including conecting the Urinal with waste pipe , tap etc.

complete.(A) White earthenware flat back or corner

type size 430mm x 260mm x 350mm. ,including sutting

holes and making good the Providing and fixing C.P.

brass waste for washbasin or sink. (A)

32mmdia.,Providing and fixing Angle tap,

48 Providing and fixing 600mm x 450mm bevelled edge 2.00 No 859.40

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

49 Providing and fixing Gun metal check or non-return 1.00 No 420.63

fullway wheel valve. 25mm. dia.

50 Providing and fixing Gun metal check or non-return 1.00 No 663.42

fullway wheel valve. 40mm. dia.

51 Providing and fixing chromium plated brass half turn 2.00 No 263.77

flush cock of approved quality including fixing in pipe

line etc. complete.(ii) 25mm dia.

52 Providing and fixing ball cock of approved. quality as 1.00 No 132.88

directed.(A) Copper Metal (A) 25mm. dia.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

53 Providing laying and jointing in true line and level 10.00 RMT. 72.64

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

54 Providing laying and jointing in true line and level 21.00 RMT. 91.83

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

55 Providing, laying and jointing in true line and level 110 19.00 RMT. 878.56

diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost

of all materials.

56 Providing and fixing S.W. gully trap with C.I. grating 1.00 No 1246.91

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm size

P or R type

57 Constructing Brick masonry road gully chamber 500mm 1.00 No. 2017.19

x 450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

58 Constructing brick masonry chamber for underground 2.00 No 2932.92

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

59 Providing laying (to level or slopes) and jointing 8.00 RMT. 257.18

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing

of joints complete. (B) 150 mm d

60 Providing laying (to level or slopes) and jointing 8.00 RMT. 359.84

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing

of joints complete.(C) 250 mm di

61 Providing laying (to level or slopes) and jointing 8.00 RMT. 678.02

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing

of joints complete.(D) 300 mm di

62 Providing & fixing G.I. Rain water spout of 50 mm.dia 2.00 No. 101.90

& 30 cm length etc.

63 Providing and fixing in position cowel went to pipes.(C) 2.00 No. 505.17

64 Providing erecting and fixing double coated PVC. (ISI) 500.00 Lit 3.94

water tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

65 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 21.00 Pt. 485.81

wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/ metallic/ white front plate

modules erected on/ in wall / ceiling as per pipe erected,

with necessary Lamp holder/ ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

66 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 8.00 Pt. 674.68

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with

6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC /

Metallic/ Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

67 Point wiring for on board Looped Plug with 6A Modular 6.00 Pt. 257.55

type switch & 5 pin socket erected on PVC/ Metallic/

Wooden box, single mounting base frame covered with

textured / metallic/ white front plate modules erected

on/ in wall/ ceiling with following type accessories Cat.

68 Providing following type of Modular Type Accessories 2.00 Nos 151.50

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge. (1)One No. SP 6 Amp. Cat.III

69 (2) One No 5 pin plug Cat.III 2.00 Nos 151.50

70 (9) 16 Amp. SP one way switch Cat.III 6.00 Nos 180.79

71 (10) 6/16Amp. Universal socket Cat.III 6.00 Nos 199.98

72 Providing and erecting Mains with 1.1 KV grade FRLS 96.00 Mtr. 82.82

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessories (b) 2 wire

73 Providing and erecting Mains with 1.1 KV grade FRLS 128.00 Mtr. 112.11

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

74 (h) 4 wire 6 sq. mm 20.00 Mtr. 260.58

75 Providing & erecting Switch board for Computer or 7.00 Nos. 1133.22

electric apparatus consisting of following modular type

accessories mounted with PVC/ Metallic concealed/

open box with single mounting base frame covered with

textured/ metallic/ white front plate,modules erected

with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

76 Supplying and erecting LED indoor fittings with LEDs 18.00 Nos. 373.70

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/ CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95,

THD < 15%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/ watt, LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

(A) Tube Light with integral driver (iv) 22-24 Watts,

Surge - 2KV,IP-20, conventional 4 feet Cat.III

77 Supplying and erecting led lamps with following wattage 3.00 Nos. 112.11

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with

PC diffuser suitable LAMP holder (ii) 5 to 8 watts

78 Providing and erecting Miniature circuit breaker single 12.00 Nos. 112.11

pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III

79 Providing & erecting 415 V MCB Four Pole for Motor 2.00 Nos. 737.30

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (c)63 Amp. Cat.III

80 Providing and erecting Sheet Steel powder coated MCB 1.00 Nos. 355.52

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (A)

single phase incoming and horizontal single phase

outgoing (a) single door (IP-30) (i)4 way

81 (B) three phase incoming and single phase horizontal 1.00 Nos. 2339.16

type outgoing Per phase isolation type (PPI) (b) sheet

steel double door (i)4 way

82 Providing and erecting Approved make RCCBs 3.00 Nos. 2235.13

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component. for following Max. rating erected as

directed (ii) 40Amps. DP Cat. III

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

83 Providing and erecting Pipe type earthing having 150 1.00 Nos. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

84 For using salt and charcoal / coke as required for pipe 1.00 Nos. 171.70

type earthing.

85 Providing and erecting Approved make Ceiling fan with 8.00 Nos. 1596.81

double ball bearing ISI mark with condenser A.C.

23OV.50 c/s.1200 mm. sweep complete, canopy erected

on existing hook or clamp with earthing. [Make shall be

approved by Engineer in charge]

86 Supplying and erecting 19 / 20 mm. nominal bore 8.00 Mtr. 108.07

Medium Class M.S. Pipe down rod erected duly painted

for fan complete with proper insulation without leakage

and earthing.

87 Supplying & erecting fan hook box of 10 mm M.S. 8.00 Nos. 108.07

round bar bounded to the RCC bars up to 50mm length

each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

88 Providing & fixing & making Table LxBxH (1.20 x 0.60 1.00 No 14180.40

x 0.75) using Ply Wood ISI Brand Using IS

Plywood ( 8mm, 10mm, 12mm, 19mm, & 25mm) Top

with All side square top for superior quality table with

thickness of 25 mm.All the outer & Inner surface cover

by I.S.I. brand Sunmica of Formica , silicone ,bloom

green or equivalent & inner 1.5mm thick Laminate

Sheet silicone or bloom or equivalent Brand.using

drawer channel of Hetich brand & handle s.s. matt &

drawer lock , including S.S Screws , necessary hardware

etc. complete including necessary polish, hardware and

labour etc. As per attached drawing & instructed by in

charge Consultant. key board tray, CPU stand Ebaco

Brand, drawer cabinat,horizontal - vertical cable cover,

LEG frame )

89 Providing and fixing of OFFICE CHAIRS of pvc base 1.00 No 3393.60

and armrest,40 density high mould foam in seat and

back,or mesh, pu upholstry,multi funtional mechenism,

bifma class IV gas lift and p.a castors,REVOLVING

chairs as per the specified company of HOF, Feather

the work satisfactorily as per instruction of architect or

Engineer-in charge

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

90 Providing and placing of Study Chair With Extra 40.00 No 2373.50

Support Of Pips Must Be required For Long Time Usage

Chair Overall Size (approx): H-83 x W-52 x D- 60 (cm)

Material Description: Seat & Back: Seat & back from

hot mould plywood of minimum 12 mm thickness of

ergonomic design to avoid back pain. Cushioning: PU

foam having density of 40 kg for back and 50kgs/m3 for

seat. Average thickness of foam not less than 50 mm +

10 mm Polly foam.

Tapestry: Minimum average weight required 400to490

gms per sq. mtr,with average weight of 450 grams per

square meter ● Frame structure: 4 legs type Frame and

handle for arm rest from ERW prime quality tube of

swg, reinforced at all bends for static and impact load

with cushioning effect

● Finishing: All steel parts will be epoxy polyester

powder coated to the thickness not less than 50 microns

finish after 10 tank anti-rust treatment and B grade

phosphating (in house) & same will be demonstrated to

the Engineer incharge during pre-dispatch Inspection.

● Product Shoud be Tested by approved BIFMA

standard laboratories confirming to ANSI/BIFMA X 5.1-

2002 Cl. No. 5,7,8,12,13,17 on functional requirement.

Certificets Should be submiting With Supply

,Without certificets Product Will Not Be Accepted.All

work must be done As per Architect Drawing &

91 Instructed

Providing &ByFixing

Site Engineer

single Modular Reading table 40.00 No 5090.40

Table Size 900 x 610 x 760 with 1370mm high partition

and extra shelf for bags

Table top made with 19mm thick Semi water proof

plywood of ISO 303, with all sides border of 40 mm

thick in 19mm thick ply wood, single side seating

system , with extra book shelf above top , foot rest, All

outer surfaces are to be laminated with 1.0 mm laminate

and bottom of table are to be laminated with 0.80mm

laminate sheet as approved by architect. Including all

necessary hardware & fittings such as screw, buffer,

bonding material etc.(Wall facing modular reading

tables) . all work must be done As per Architect

Drawing & Instructed By Site Engineer Table

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

92 Providing & Fixing single faced main unit and add on 1.00 No 13291.60

M.S. Book Rack

multipurpose expandable storage rack in knock down

design with Adjustable 3 shelves making

compartments of 20swg thick. TATA/Essar/Jindal

CRCA sheet IS

Approximant size H-1524 X W-915 X D-380mm

● Storage shelf of 22swg thick. TATA/Essar/Jindal

CRCA sheet IS

● All steel parts will be epoxy polyester powder coated

to the thickness not less than 50 microns finish after

tank anti-rust treatment and B grade phosphating (in

house) & same will be demonstrated to the purchaser

during pre-dispatch inspection.

● Bottom Frame of25*25*1.21mm Thik, ERW Square

MS Tube With Adjustable Stud .With Extra 2 Book

Support On Each Shelf . all work must be done As per

Architect Drawing & Instructed By Site Engineer

Rupees TwentyFour Lakh ThirtySix Thousand Five Hundred EightySeven Paise FourtyNine Only

I we am / are willing to carry out the work at …................................ % above/ Below percent ( Should Be writen

in figures And words) of the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated Amount Put to tender. 24,36,587.49 Estimated Amount Put to tender.24,36,587.49

Deduct…........ % Below Deduct…........ % Below

In Words In Words

(1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

(2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

(3) GST and Income tax TDS will be deducted at a source while making payments of bills

(4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per

actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

Signature of Bidder

Deputy Executive Engineer Divisional Accountant

Panchayat ( R&B) Sub Division Panchayat ( R&B) Division

Mandavi Surat

Executive Engineer Executive Engineer

Electrical ( R&B) Division Panchayat ( R&B) Division

Surat Surat

SHEDULE B Page