C/o Balance work for the repair of Slaughter house near Zonal Hospital Dharamshala

Amount

Demolition above G.L.upto floor two level including disposal of unserviceable materials within 20 metres lead. un-reinforced cement concrete more than 15cm. Thickness including carriage of material in all leads and lift and direction of Engineer-in-charge.

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres Pick Work including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 Graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc.including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:2:4(1 cement:2 sand :4 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 1 mm thick M.S sheet garrage door with frame of 40 mmX 40mm X6mm angle iron 3.15 mm m.s gusset plates at the junctionsand corners,all necessary fittings complete including applying a priming coat of red lead paint.Using M.S angles 40mm x 40mm x 6mm for diaganal braces including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flushpointing in white cement including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed withcement slurry mixed with pigment to match the shade of tiles as requiredcomplete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying soling/ boulder under flooring complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

rajinder singh