Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹63.8 L
EMD Value
₹63,797
Closing Date
12 Feb 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Repair work in respect of Civil works, Modular Furniture, Electrical, Sanitary Fixtures and fittings, IT works etc.
NSL/CEO/FC/NIT/2024/631~EWcc95b3eec7fb9b73a4246dc2
NSL/CEO/FC/NIT/2024/631
Open Tender-Domestic
Miscellaneous
NBCC Bhawan
₹2,950
₹63,797
12 Feb 2024
2 Feb 2024
12 Feb 2024
2 Feb 2024
12 Feb 2024
S.No. Description of Works
SPECIAL REPAIR OF 9TH FLOOR SIXTEENTH FINANCE
1 COMMISSION AT 9TH FLOOR, JAWAHAR VYAPAR BHAWAN/STC 3965741.47
BUILDING, JANPATH, NEW DELHI
ONE ROOM FOR SECRETARY, SIXTEENTH FINANCE COMISSION
AT 9TH FLOOR SIXTEENTH FINANCE COMMISSION AT 9TH FLOOR,
JAWAHAR VYAPAR BHAWAN/STC BUILDING, JANPATH, NEW
GRAND TOTAL Rs 6379644.00
GRAND TOTAL Rs 6379644.00
Digitally signed by AMIT
SPECIAL REPAIR OF 9TH FLOOR SIXTEENTH FINANCE COMMISSION , JAWAHAR VYAPAR
BHAWAN/STC BUILDING, JANPATH, NEW DELHI
Summary of Work Estimate
S.No. Description of Works
(DSR, in Rs.) (MR in Rs.)
2 Modular Furniture 0 4,76,500.00
3 Electrical Works 1,69,153.00 7,63,116.17
4 Sanitary Fixture and fittings 0.00 2,66,808.77
5 Water Supply 19,214.60 0.00
6 Internal Drainage 0.00 12,969.00
TOTAL COST OF WORK 18,61,358.61 21,04,382.86
GRAND TOTAL 39,65,741.47
GRAND TOTAL 39,65,741.47
Digitally signed by AMIT
DSR-2023 AMOUNT MARKET AMOUNT
S.No. DESCRIPTION UNIT QTY RATE
Ref. No. (DSR) RATE (NDSR)
Dismantling tile work in floors and roofs laid in cement mortar including stacking
material within 50 metres lead.
15.23.2 For thickness of tiles above 25 mm and up to 40 mm Sqm 95.00 113.35 10768.25
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable
material within 50 metres lead.
Dismantalling of PVC/ plywood wall panelling including stacking of serviceable material and disposal of unserviceable
material within 50 metres lead.
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of
1.4 15.7 unserviceable material within 50 metres lead as
per direction of Engineer-in-Charge.
15.7.4 In cement mortar Cum 3.00 2060.20 6180.60
Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable
surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge.
Dismantalling of existing duct, grills, diffuers, and other related components complete including disposal of unserviceable
material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete
and stacking within 50 metres lead:
15.12.2 Of area beyond 3 sq. metres Each 5.00 502.75 2513.75
Carriage of material by mechanical transport including loading unloading and
1.1.1 Lime, murrum, building rubbish
2 MASONRY AND PLASTER
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement,
including cement slurry, but excluding the cost of nosing of steps etc. complete.
11.3.1 40 mm thick with 20 mm nominal size stone aggregate Sqm 35.00 614.20 21497.00
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level
up to floor V level.
6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 5.00 1123.80 5619.00
2.3 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Sqm 5.00 104.80 524.00
2.4 13.2 CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall of mix.
2.5 13.4 12 mm cement plaster of mix
Digitally signed by AMIT
DSR-2023 AMOUNT MARKET AMOUNT
S.No. DESCRIPTION UNIT QTY RATE
Ref. No. (DSR) RATE (NDSR)
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with
water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /Sqm mixed with water
proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement
@ 0.242 kg/ Sqm mixed with water proofing cement compound @ 0.126 kg/ Sqm. This layer will be allowed to air cure for 4 hours
followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners,
junctions of pipes and masonry with polymer mixed slurry.
FOAM CONCRETE FILLING UNDER TOILETS AND PANTRY:- Filling andcompacting Foam Concrete for raising level
of toilets and pantry and finishing in a coat of lean concrete screeding with waterproofing compound complete in all respects
to take Tile Flooring as per flooring
specifications.
3 PAVING AND WET WORKS
TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified
by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of size-600x300 as
3.2 MR approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 Sqm 70.00 1267.95 88756.50
coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of
matching shade complete.
CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to
be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White,
Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry
@ 3.3 kg/ Sqm including pointing the joints with white cement and matching pigments etc., complete.
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water
absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20
mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/Sqm including grouting the joints
with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will
be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently
11.41A.2 Glazed vitrified floor tiles polished finish of size
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired
3.4 11.48 shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of
Engineer-in-charge.
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of
the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of
3.5 11.56 cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed
with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed
by the Engineer-in-Charge.
11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent Sqm 6.00 4481.30 26887.80
Digitally signed by AMIT
DSR-2023 AMOUNT MARKET AMOUNT
S.No. DESCRIPTION UNIT QTY RATE
Ref. No. (DSR) RATE (NDSR)
Supply of modular carpet of approved model and shade and made with 100% nylon 6/6.6 tufted textured tiles of minimum 500mm x
500mm in size, stain resistant, anti microbial, and having colour fastness to water, fastness to light, rubbing fastness and castor
chair suitability as per relevant standard for heavy commercial usage, with 100% PVC free Wellbac Function Backing with
having average density 6000 oz/cu. yd. or more,Nominal total thickness of 5.9mm, and Pile weight – 16-18 oz/ sq yard.
Material shall be CRI GREEN LABEL PLUS certified, and shall have recycled content complying to GRIHA requirement,
including fixing with GRIHA compliant adhesive of approved make,
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed
from M.S. sheets and galvanized with zinc coating of 120 gms/Sqm (both side inclusive) as per IS : 277 and consisting of
angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to
the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of
25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.
channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom
wedge of 80 mm with tapered flanges of 26 mm Each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a
direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long
G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,
the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230
mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x
25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended
jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint
and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making
openings for light
fittings, grills, diffusers, cutouts made with frame of perimeter channels
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) Sqm
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The
tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire
Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized
iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of
length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600
mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm
long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level
adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls
/partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with
help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-
sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried
out as per specifications, drawings and as per directions of the engineer-in-charge.
26.27.1 With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6 Sqm 170.00 2333.60 396712.00
Digitally signed by AMIT
DSR-2023 AMOUNT MARKET AMOUNT
S.No. DESCRIPTION UNIT QTY RATE
Ref. No. (DSR) RATE (NDSR)
CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made hardwood framings
4.3 MR hung from ceiling @1000mm centre to centre with 1 nos of 12mm thk. fire retardant ply on vertical & 12mm thk. Commercial ply Rmt 20.00 960.00 19200.00
on horizontal surface (straight & curved). Inclusive of finishing in Paint.
GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral fibre/ gypsum ceiling. In order to
44.0 MR make the Mineral Fiber/ gypsum ceiling higher than the Gypsum Ceiling by upto 100mm as per drawings. (visible surface of Rmt 20.00 395.00 7900.00
gypsum band to not exceed 100mm) including plastic emulsion paint.
5.0 FINISHING WORKS
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less
5.2 13.83 than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade
5.3 13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre Sqm 200.00 70.35 14070.00
ROLLER BLINDS - Providing and fixing of Roller Blind of sturdy aluminium top
tube of 38mm diameter, powder coated bottom bar, with suitable roller clutch mechanism and plastic ball chain. The Roller Blind
fabric should possess the below mentioned specifications with fabric made up of 85% Polyester and 15% Catonic Polyester. Roller
blinds with Solar protection fabric of high tenacity Polyester Yarn & Fungi static Treatment and should block the light flux & offer
elimination of glare and sunlight / heat radiance. Fabric shall have visible light & solar properties. 1st weave of thickness 0.32mm
±5% (ISO 2286-2) and weighing 210g/sm±5%. Flame Retardancy as per AS301.3- 1999. Fabric Protected by teflon fabric
protector for water and stain resitance. Harmful substance standard Oeko-tex standard 100. Constrruction of fabric 16.5+1_
Warp and end/cm 17.5+_1 (fill). Aluminium profile should have temper WP consisting of alloy 63400 along with anodizing of
10 micron and powder coating of 60 micron. The tensile strenghth of profile should be 9.10 Kg/mm square and elongation
18.The control clutch drive unit engineered heavy duty chain drive pulley operating system consisting of gear clutch housing
and locking plug containing minimum 6 ribs and inserted at minimum of 38mm into roller tube. It is self-lubricating Exclusive
clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most
convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley with ball chain and can be
positioned at Right hand or Left hand side of the shade. Clutch gear ratio of 1.75:1 for reduced operating force on larger blinds..
Mounting hardware brackets universal brackets including end plug bracket with lock down retainer device. Brackets finish of
powder coated metal installation brackets made of stamped and hardened steel. Roller tube circular-shaped aluminium tube extruded
from alloy 63400 and temper WP. Bottom rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be
2mm diameter cord with plastic balls moulded to form an endless ball
FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface with 15 yrs MCS warranty as approval of
the Architect. (Only film surface area shall be measured and paid).
Digitally signed by AMIT
DSR-2023 AMOUNT MARKET AMOUNT
S.No. DESCRIPTION UNIT QTY RATE
Ref. No. (DSR) RATE (NDSR)
Providing and fixing Zebra blind of approve colour fabric with all required powdercoated channel ,hardware material aluminium clip
,pulling cord etc .all complete
5.6 MR Wooden Panelling Groove Black Polish Sqm 450.00 0.00
5.7 MR Repair of Old Window Handle Change & Sealant filling (Silicon filling) in all area in existing windows to stop water leakage Job 1.00 35000.00 35000.00
5.8 MR Repair of old existing Blinds Job 1.00 15000.00 15000.00
Repairing of any other material/ equipement required to be done as per the requirement of site and to be decided by Engineer in
6 DOORS/ WINDOWS
DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed
6.1 9.1 and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid
for separately).
9.1.1 Second class teak wood Cum 0.15 142949.70 21442.46
FLUSH DOOR:- Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,
6.2 9.21 core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical
grains or cross bands and face veneers on both faces of shutters :
35 mm thick including ISI marked Stainless Steel butt hinges with necessary
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over
all area of door shutter to be measured)
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on
unexposed surface etc. complete:
9.40.1 2nd class teak wood
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and
6.5 9.53 embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal Each 8.00 228.85 1830.80
TOILET CUBICALS: Supplying & fixing in position Toilet Cubicle (of following standard dimension which includes 600mm door
size width) made of heat, bacteria, water, chemical, scratch and impact resistant 12mm thick solid compact laminate panels
including doors, pilasters & intermediate panels finished with approved texture/shade as per the detail drawings & as per IS 2046
(Indian Standard) and as per fire retardant BS-476/97 standard. This also includes providing and fixing in position necessary
hardware made out of anodized aluminium & Nylon Polyamide 6 make as per manufacturer’s specifications & Architects instructions
like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset with Occupancy indicators, (4) Coat hooks with Aluminium Door
stopper channel with rubber door stopper lining (5) Aluminium U channels, (6) adjustable foot/pedestal, (7) Top rail with Corner
conntector (8) Rubber noise deafening tape, (9) Screws & wall Plugs. The top fitting should consist of Aluminium top rail which will
get fixed with pilasters, with panel tube holder, corner bend (connected with top rail) will be used on the corner of cubicle in absence
of brick wall, wall fixing is used only on the wall which will hold the top rail. The base of the bottom cladding will be anchored to
the floor with a clearance height upto 150mm.
ZMS Series of Merino or Vibrance Series of Greenlam
Digitally signed by AMIT
DSR-2023 AMOUNT MARKET AMOUNT
S.No. DESCRIPTION UNIT QTY RATE
Ref. No. (DSR) RATE (NDSR)
Toilet Cubicle L-Shape with standard dimension of 2100mm H x 1500mm D x 955mm W, which includes 600mm door size
Digitally signed by AMIT
S. no. Item Specifications Unit Qty Rate Amount
Supplying and placing in position of 360 degrees revolving medium back chair . The Craze
chair of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be
ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS
Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The chair shall be
provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five
1 Medium Back chair star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Nos 6.00 18,500 1,11,000.00
The backrest has a foam of 28kg/m3.
Dimesnion: 1500mm(L) x 1500mm(L) x 600mm(D) x 1200mm(H) Modular Workstation
With Side Top with 3 drawer Pedestal Size 1500W x 600D x 750/1200H.Partition NI-
60mm Partition Ht. 1200mm, Double Raceway systems Skirting label and below the table top
. lower tile both side laminated and upper tile inside side fabric, White Board and white Tinted
Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel end 18mm thick MDF
Modular board., and 3Drawer top supported Pedestal unit Size 400W x 400D x 725H made in
18mm thick..Complete Made in MDF Board.. Laminate 1- Frosty White, Laminate2 For
drawer Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating-Munshel Gray. and
White Tinted Glass
Dimesnion: 1200mm(L)x 600mm(D) x 750mm(H) Modular Workstation With 1200mm,
Double Raceway systems Skirting label and below the table top . lower tile both side
laminated and upper tile inside side fabric, White Board and white Tinted Glass . With Side
Top Size 900W x 400D x 750H 25mm thick Gabel end 18mm thick MDF board., and
3 Linear Workstation 3Drawer top supported Pedestal unit Size 400W x 400D x 725H made in 18mm Nos 4.00 31,500 1,26,000.00
thick..Complete Made in MDF Board.. Laminate 1- Frosty White, Laminate2 For drawer Facia-
Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating-Munshel Gray. and White Tinted
Removing & Work station Removing & Refixing incliding overall repair and replacement of parts of existing
Refixing modular furniture.
The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back
panel is made of 09mm thick MDF of approved shade. All the edges of storage surface shall be
Openable Shutter provided with machine pressed imported PVC lipping glued with hot melt EVA glue free from
storage any VOC with free groove handle and suitable lock. All exposed area PVC edge lipping
Total Amount 4,76,500.00
Total Amount 4,76,500.00
Digitally signed by AMIT
SCHEDULE OF QUANTITIES - ELECTRICAL WORKS
S NO DSR NO DESCRIPTION UNIT Qty. RATE AMOUNT AMOUNT
DSR (INR) NON-DSR
A POINT WIRING (INR)
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable in surface /
recessed medium class PVC conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated
1 1.10 copper conductor single core cable etc as required.
Wiring for group controlled (looped) light point/ fan point/call bell point
(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable in surface / recessed PVC conduit, and
2 1.55 earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single
core cable etc as required.
Wiring for light/ power plug with 2x4 sq mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed medium class PVC conduit
alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable
for loop earthing as required.
Wiring for light/ power plug with 4x4 sq mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed medium class PVC conduit
alongwith 2 Nos 4 sq. mm FRLS PV insulated copper conductor single core cable
for loop earthing as required.
Digitally signed by AMIT
S NO DSR NO DESCRIPTION UNIT Qty. RATE AMOUNT AMOUNT
DSR (INR) NON-DSR
5 1.24 Supplying and fixing following modular switch/ socket on the existing modular (INR)
plate & switch box including connections but excluding modular plate etc. as
1.24.4 3 pin 5/6 amp socket outlet Each 8 122.00 976.00
1.24.5 6 pin 15/16 amp socket outlet Each 6 197.00 1182.00
6 1.26 Supplying and fixing modular blanking plate on the existing modular plate
& switch box excluding modular plate as required. Each 5 40.00 200.00
7 1.27 Supplying and fixing following size/module, GI box along with Modular base &
cover plate on existing modular metal boxes etc. as required.
B SUBMAIN AND CONTROL WIRING
1 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following
sizes of FR PVC insulated copper conductor, single core cable in surface/
recessed steel conduit as required
1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 50 233.00 11650.00
1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 40 275.00 11000.00
1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 30 334.00 10020.00
1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 10 439.00 4390.00
1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 5 1005.00 5025.00
1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 5 1365.00 6825.00
Supplying and making end termination with brass compression gland and
aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE
1 9.1 aluminium conductor cable of 1.1 KV grade as required.
Digitally signed by AMIT
S NO DSR NO DESCRIPTION UNIT Qty. RATE AMOUNT AMOUNT
DSR (INR) NON-DSR
MR Supply of following XPLE armourned 1.1 KV grade conforming to
2 I.S.7098/1554Aluminium Conductor Cables :
Supply of following sizes of PVC sheathed PVC/XLPE insulated
Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098
part-1 / IS:1554 part-1 respectively & ISI marked.
(d) 3.5 C x 50 Sqmm XLPE cable Metre 403.00 0.00
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,
1 2.10 miniature circuit breaker suitable for inductive load of following poles in
the existing MCB DB complete with
2.10.1 connections,
Single pole testing and commissioning etc. as required. Each 10 256.00 2560.00
Supplying and fixing following rating, four pole, (three phase and neutral), 415
volts, residual current circuit breaker (RCCB), having a sensitivity current 30
mA in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Supplying and fixing following way, vertical type three pole and neutral,
sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with
tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,
2 2.5 powder painted including earthing etc. as required. (But without
MCB/RCCB/Isolator)
Supplying and fixing following rating, double pole, (single phase and
3 2.14 neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity
2.14.1 current
25 ampsupto 300 milliamperes in the existing MCB DB complete with Each 2028.00 0.00
Digitally signed by AMIT
S NO DSR NO DESCRIPTION UNIT Qty. RATE AMOUNT AMOUNT
DSR (INR) NON-DSR
E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS
MR Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 Set 6 46.05
1 way for floor box. 276.30
MR Supply, Installation, Testing and Commissioning of USB port Socket in single Each 2 715.49
2 module 1430.97
MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor Set 2 371.29
1.24 Supplying and fixing following modular switch / socket on the existing modular
plate & switch box including connections but excluding modular plate etc. as
1.24.7 TV socket outlet Set 1 148.00 148.00
1.24.6 Telephone Socket Outlet Set 4 148.00 592.00
Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper
conductor, unarmoured telephone cable in the existing surface / recessed
1.18 steel / PVC conduit as required.
MR 20 Pair Metre 82.03 0.00
MR 50 pair Metre 166.94 0.00
Supply, Installation, Testing and Commisioning of Galavanized Iron (GI)
Raceways along with required suitable number of GI couplers for joining
raceways and fixing GI brackets and all accessories complete in all respect as
MR per the directions of engineer in charge
(a) 300mmx38mm(GI) - 3 compartment Metre 1279.38 0.00
(b) 225mmx38mm(GI) - 3 compartment Metre 10 1027.52 10275.20
Digitally signed by AMIT
S NO DSR NO DESCRIPTION UNIT Qty. RATE AMOUNT AMOUNT
DSR (INR) NON-DSR
MR Supply, Installation, Testing and Commisioning of Junction boxes for direct (INR)
access to cables at the intersection of raceways supplied completely with
base and cover plates, height adjustable junction box 65- 90 mm including all
accessories complete in all respect as per the directions of engineer in charge
Supplying and fixing of following sizes medium class PVC conduit aong with
accessories in surface/ recess including cutting the wall and making good
the same incase of recessed
1.21 conduit as required
4.1 Supplying and Installation of following size perforated of painting with
powder coating M.S. cable trays of perforation of not more than 17.5%
in convinient sections, joined with connectors suspended from the cieleing
with MS suspenders including bolts and nuts painting suspenders etc as required
4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 1137.00 0.00
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
1 5.6 arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt Set 1 13838.00 13838.00
5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for Metre 5 1162.00
2 connections etc. as required. 5810.00
5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for Metre 5 244.00
3 connections etc. as required. 1220.00
Digitally signed by AMIT
S NO DSR NO DESCRIPTION UNIT Qty. RATE AMOUNT AMOUNT
DSR (INR) NON-DSR
5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing Metre 5 70.00 (INR)
4 as required. 350.00
Installation of exhaust fan in the existing opening, including making good Each 450.00
the damage, connection, testing, commissioning etc. as required. Upto 450mm
Supply, Installation, Testing and Commisioning of pre-wired round shape
Recessed 15Watt LED Down Lighter fitting complete with all accessories,
housing made of Aluminium Die-cast, System Efficasy >100 LPW, CRI >80,
CCT of 4000K. suitable for 220 V, 50 Hz, The luminare rated life (L70) >50000
Hours with High efficiency driver with inbuild surge protection, over voltage
protection, short circuit protection and operating at >0.95 PF., BIS approved
Driver including connection with 1.5 sq. mm FR PVC insulated, copper NOS 20 1,470.91 29418.20
conductor, single core cable and earthing etc as required.
Supply, Installation, Testing and Commisioning of 600X600 36- 40Watt LED
fitting complete with all accessories, housing made of Aluminium Die-cast,
System Efficasy >100 LPW, CRI >80, CCT of 4000K. suitable for 220 V, 50 Hz,
The luminare rated life (L70) >50000 Hours with High efficiency driver with
inbuild surge protection, over voltage protection, short circuit protection and
7 MR operating at >0.95 PF., BIS approved Driver including connection with 1.5 sq. NOS 30 3,250.00 - 97500.00
mm FR PVC insulated, copper conductor, single core cable and earthing etc as
Digitally signed by AMIT
S NO DSR NO DESCRIPTION UNIT Qty. RATE AMOUNT AMOUNT
DSR (INR) NON-DSR
Pendant luminaire Ring with HPE (High Performance Efficiency) LED (Light
Emitting Diode) system power: 30 W, Luminous flux of luminaire 3000
lm,Colour temperature of 4000 K, neutral white, CRI > 80, , THD<5% , SDCM
<3 , R9>0 230 V constant current driver, 70% of luminous flux after 50,000
8 MR operating hours; Energy efficient LEDs, Direct light emission, Luminaire profile Nos. 1 17000 - 17000.00
in aluminium, Polyester powder black coloured coat applied over a 5- stage pre-
treatment, Prismatic diffuser for a homogenous light distribution, ZHLS (ZERO
HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Protection
class I, IP20, Ø = 600 mm, W = 100 mm, H =67 mm, PL = 1500 mm
SITC of Recessed mouted PDC lowdepth(height should not be more than 35mm)
COB downlights with maximum 12 Watt with minimum 1320 lumen.The product
should be SMD based & have non integral isolated driver with 2KV inbuilt
9 MR surge protection. THD<10%, PF >0.9,Product should have life class of 50K Nos. 12.00 2200.00 26400.00
burning hour at L70 B50 parameter, Luminiare operating temp 0 D to 45D.
Internal wiring should have teflon coted multi strand wires and external wire
should have PVC coated multistrand wires.
Special repair of Fire alarm system, Fire-Fighting system, Existing HVAC system
including duct and grills, Access Control system
Total of Electrical items 932269.17
Digitally signed by AMIT
BOQ FOR PLUMBING
SUB HEAD A: SANITARY FIXTURES & FITTINGS
SL. DSR - DSR Rate DSR Amount
DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) NS Amount (Rs)
NO. /NDSR (Rs.) (Rs)
Providing & fixing glazed vitreous china single trap syphonic
pattern having back inlet ,supporting chair ,wall hung water
closet with cistern complete with all internal
fittings/accessories and CP brass flush bend (European type)
1.1 NS water closet with seat and lid, with C.P. brass hinges and
rubber buffers, adapter, rubber joints fixed to W.C., C.P.
brass screwed washers including cutting and making good the
walls and floors wherever required and HDPE wc pan connector
including jointing with white cement coomplete in all respects
Wall hung W.C. pan (White colour)with white plastic seat &
lid "Thermoset moulded ( bakelite ) IS 2548 Part I
For supply,installation,testing & commissioning of sanitary
fixtures as per above details.
Providing & fixing glazed vitreous china wash basin with R.S. or
C.I. brackets painted white, 32mm C.P. brass waste of standard
pattern , C.P brass wall flange 32 mm dia. C.P. brass bottle trap
1.3 NS and union 32 mm dia C.P. pipes to wall flange. complete
including cutting and making good the walls wherever required.
1.3.1 Undercounter wash basin (White colour)of size: 585x430 mm
For supply,installation,testing & commissioning of sanitary
fixtures as per above details. Each 2 8,077.67 16155.34
Table top wash basin (white colour)of size: 440x440 mm
For supply,installation,testing & commissioning of sanitary
fixtures as per above details. Each 1 9,998.50 9998.5
Providing & fixing 15mm C.P. brass single hole wash basin
1.4 NS mixer without popup waste system with 450mm long copper
pipes and brass nut
Digitally signed by AMIT
SL. DSR - DSR Rate DSR Amount
DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) NS Amount (Rs)
NO. /NDSR (Rs.) (Rs)
For supply,installation,testing & commissioning of sanitary
fixtures as per above details. Each 3 4,253.68 12761.04
1.5 NS Providing & fixing vitreous chinaware urinal comprising
Large flat back wall hung urinal in glazed vitreous China
new magnum urinal
15 mm electrically operated solenoid valve with infra red
sensor mounted in a box with SS Cover.
CP brass chromium plated flush piping from solenoid valve to
urinal terminated with a 15 mm screwed spreader
32 mm nominal bore CP cast brass waste
32 mm nominal bore CP cast bottle trap with extension pipe
rubber adopter for waste connection, CP brass wall flange.
For supply,installation,testing & commissioning of sanitary
fixtures(white colour) as per above details. Each 2 28,081.74 56163.48
Providing & fixing toilet paper holding including cutting and
making good the walls.
For supply,installation,testing & commissioning of sanitary
fixtures as per above details. Each 3 1,993.65 5980.95
Providing & fixing Horizontal liquid soap dispenser with
1.9 NS stainless steel lid and brackets fixed to wooden cleats with
C.P. brass screws.
For supply,installation,testing & commissioning of sanitary
fixtures as per above details. Each 3 3,579.16 10737.48
Providing & fixing C.P. brass coat hooks fixed on toilet door
with C.P. brass screws
For supply,installation,testing & commissioning of sanitary
fixtures as per above details. Each 2 605.14 1210.28
Providing & fixing beveled edge mirror 5.5mm thick of
superior quality plate glass complete with 6mm thick marine ply
1.11 NS sheet ground fixed to wooden cleats with CP brass screws
and washerswith 40 mm wide teak wood frame as
per design including polishing
Digitally signed by AMIT
SL. DSR - DSR Rate DSR Amount
DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) NS Amount (Rs)
NO. /NDSR (Rs.) (Rs)
For supply,installation,testing & commissioning of sanitary
fixtures as per above details. Sqm 6 2,488.44 14930.64
Providing & fixing Hand Shower (Health Faucet) with 8mm dia,
1M long PVC tube and wall hook CP brass wall flange
For supply of sanitary fixtures as per above details Each 3 1,730.53 5191.59
Providing & fixing, testing and commissioning of storage
type electric water heater with automatic thermostatic
1.13 NS control electric element, pressure release valve, brackets
fixed to expansion fasteners with M.S. nuts and bolts all
complete including cutting and making good the walls
wherever required.
25 litres capacity (Horizontal /Vertical type1.5 kw electrical
For supply,installation,testing & commissioning of sanitary
fixtures as per above details.
Providing & fixing wall mounted 25 mm dia Stainless steel
1.15 NS coated grab bar including cutting & making good the walls(size
For supply,installation,testing & commissioning of sanitary
fixtures as per above details.
Providing & fixing 15 mm dia C.P. brass bib cock with Hose union
of approved quality.
For supply,installation,testing & commissioning of sanitary
fixtures as per above details.
Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall
flange of approved quality.
For supply,installation,testing & commissioning of sanitary
fixtures as per above details.
FRAGRANCE DISPENSER MACHINE :-Providing and fixing of
Fragrance Dispenser machine complete with refill can and 'C'
size battery (2 Nos) for operation fixed to wooden cleats with CP
For supply,installation,testing & commissioning of sanitary
fixtures as per above details.
Digitally signed by AMIT
SL. DSR - DSR Rate DSR Amount
DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) NS Amount (Rs)
NO. /NDSR (Rs.) (Rs)
Providing and fixing of stainless steel finish Paper Towel
1.19 NS Dispenser having capacity of 300-350 paper towels fixed to
wooden cleats with C.P. brass screws
For supply,installation,testing & commissioning of sanitary
fixtures as per above details.
Detail of Sanitary fixture are for the information of the
Contractor,however model/makes of all sanitary fixtures shall
i. be selected by Architect/Interior designer/Project manager
and the same shall be binding for execution.
No additional fixing cost shall be paid for change in type of
sanitary fixtures.
Contractor to receive all the above mentioned items &
iii. store at place as directed at site.
TOTAL CARRIED OVER TO SUMMARY 2,66,808.77
Digitally signed by AMIT
SUB HEAD B: WATER SUPPLY
NO. DSR Rate NS Rate DSR NS
DSR/NDSR DESCRIPTION OF ITEMS UNIT Qty
(Rs.) (Rs.) Amount (Rs) Amount (Rs)
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having
thermal stability for hot & cold water supply including all (CPVC) plain
& brass threaded fittings including fixing the pipe with clamps at 1.00
1 18.7 m spacing. This including jointing of pipes & fittings with one step
CPVC solvent cement and testing of joints complete as per direction of
engineer in charge. .
Internal Work - Exposed on Wall
18.7.2 20 mm nominal outer dia pipes. Metre 4.00 335.00 1340.00
18.7.3 25 mm nominal outer dia pipes. Metre 2.00 401.55 803.10
18.7.4 32 mm nominal outer dia pipes. Metre 0.00 518.75 0.00
18.7.5 40 mm nominal outer dia pipes. Metre 0.00 702.95 0.00
18.7.6 50 mm nominal outer dia pipes. Metre 0.00 934.15 0.00
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having
thermal stability for hot & cold water supply including all CPVC plain &
brass threaded fittings i/c fixing the pipe with clamps at 1.00 m
2 18.8 spacing. This including jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the
the same including testing of joints complete as per direction of
engineer in charge.
Concealed work oncluding cutting chases and making good the
18.8.2 20 mm nominal outer dia pipes. Metre 15.00 537.60 8064.00
Providing and fixing brass stop cock of approved quality
3 18.16 complete.
15 mm nominal bore Each 2.00 353.25 706.50
20 mm nominal bore Each 2.00 379.20 758.40
Providing and fixing gun metal gate valve with C.I. wheel of
4 18.17 approved quality (screwed end):
25 mm nominal bore Each 1.00 622.40 622.40
32 mm nominal bore Each 1.00 689.60 689.60
Digitally signed by AMIT
NO. DSR Rate NS Rate DSR NS
DSR/NDSR DESCRIPTION OF ITEMS UNIT Qty
(Rs.) (Rs.) Amount (Rs) Amount (Rs)
40 mm nominal bore Each 0.00 826.10 0.00
Providing and fixing C.P. bass angle valve for basin mixer and
5 18.53 geyser points of approved quality conforming to I.S:8931 a) 15 mm
15 mm nominal bore Each 10.00 574.30 5743.00
Providing and fixing unplasticised P.V.C connection pipe with
6 18.74 PTMT Nuts coller and bush of approved quality and colour.
15mm nominal bore with 45cm length Each 4.00 121.90 487.60
Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 19214.60
Digitally signed by AMIT
SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)
SL. DSR - DSR Rate NS Rate DSR Amount NS Amount
NO. /NDSR DESCRIPTION OF ITEMS UNIT Qty (Rs.) (Rs.) (Rs) (Rs)
Providing, fixing, jointing and testing in position of ISI marked UV stabilized
UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for
rubber ring joints, including all neccessary specials and fittings (confirming to
IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC
connectors, couplers, expansion joints / bellows, cowels, clamps, rubber
rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &
hangers etc. in concealed / inside duct / under floor & basement ceiling / external
work etc. including chase cutting as required, excavation and back filling in all
kind of soils, suspended from floor under false ceiling or embedding the pipes
laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement :
MR 20 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost
of shuttering for proper completion of the work, breaking and making good
the walls and floors etc. after pipes have been duly laid and tested. The rubber
ring shall confirm to IS:5382.
The Pipes will be supported with threaded G I rods & U clamps with nuts,
washers etc on 50x50x5 mm slotted angle. The cost will include all support
arrangements. The work includes commissioning of all pipes lines as per
drawings and specifications and as directed by engg- in-charge at site.
a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 10.00 536.00 5360.00
b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 6.00 416.00 2496.00
Digitally signed by AMIT
SL. DSR - DSR Rate NS Rate DSR Amount NS Amount
NO. /NDSR DESCRIPTION OF ITEMS UNIT Qty (Rs.) (Rs.) (Rs) (Rs)
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC
pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to
floor trap including reduces, enlarger, socket, couplers, bends, tees etc
including fixing at wall/ ceiling level supported by clamp & hangers etc.
cutting holes in wall/ floors/ slabs and making good the same with cement
MR 21 concrete 1:2:4 complete as required.
Providing & fixing UPVC Floor trap of self cleansing design with
stainless steel grating
complete in all respects.
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating
MR 23 over floor traps. EACH 2 726.00 1452.00
Providing & fixing of SS Floor Cleanout, round or square with rubber
seal and flat round cover with screws and other required fitting complete as
MR 24 required. EACH 1 1001.00 1001.00
Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 12,969.00
Digitally signed by AMIT
S.No. Description UOM Qty Rate Amount
A. UTP Components for Data
Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity
1 of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Mtr 100 58.00 5800.00
Unshielded LSZH Cable, C6
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Work
Station end. Keystone Unshielded Outlet, 180DG C6
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Work
Station end Redantant . Keystone Unshielded Outlet, 180DG C6
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information
4 outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, Nos. 2 275.00 550.00
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for information
5 outlet (I/O) to Rack End Redantant device connectivity.High Speed Gigabit 24AWG U/UTP Patch Nos. 2 235.00 470.00
Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel for CAT6 cable
termination at rack end. Data Active
Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel for CAT6 cable
termination at rack end. Data Active Redandant
B. Voice 0.00
Digitally signed by AMIT
S.No. Description UOM Qty Rate Amount
Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity
8 of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Mtr 50 58.00 2900.00
Unshielded LSZH Cable, C6
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Work
Station end. Keystone Unshielded Outlet, 180DG C6
Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred Jack Panel for
CAT6 cable termination at rack end. Voice Active
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for information
11 outlet (I/O) to end user device connectivity. (Rack end), High Speed Gigabit 26AWG Patch Cord, Nos. 2 235.00 470.00
TOTAL 20590.00
Digitally signed by AMIT
ONE ROOM FOR SECRETARY, SIXTEENTH FINANCE COMISSION AT 9TH FLOOR
SIXTEENTH FINANCE COMMISSION AT 9TH FLOOR, JAWAHAR VYAPAR BHAWAN/STC
BUILDING, JANPATH, NEW DELHI
Summary of Work Estimate
S.No. Description of Works
(DSR, in Rs.) (MR in Rs.)
Modular Furniture 0 7,38,500.00
3 Electrical Works 1,01,227.00 1,15,569.47
4 Sanitary Fixture and fittings 0.00 0.00
Water Supply 0.00 0.00
Internal Drainage 0.00 0.00
TOTAL COST OF WORK 2,48,041.05 21,65,861.25
GRAND TOTAL 24,13,902.30
GRAND TOTAL 24,13,902.30
Digitally signed by AMIT
DSR/NDSR AMOUNT MARKET AMOUNT
S.NO. DESCRIPTION UNIT QTY RATE
. (DSR) RATE (NDSR)
1.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking
15.23 material within 50 metres lead.
15.23.2 For thickness of tiles above 25 mm and up to 40 mm Sqm 40.00 113.55 4542.00
1.2 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and 266.45 6661.25
15.25 disposal of unserviceable material within 50 metres lead. Sqm 25.00
1.3 Dismantalling of PVC/ plywood wall panelling including stacking of serviceable material and 46.50 4650.00
MR disposal of unserviceable material within 50 metres lead. Sqm 100.00
1.4 Demolishing brick work manually / by mechanical means including stacking of serviceable
15.7 material and disposal of unserviceable material within 50 metres lead as
per direction of Engineer-in-Charge.
15.7.4 In cement mortar Cum 2060.20 0.00
1.5 Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling
including disposal of unserviceable surplus material and stacking of serviceable material with in 50
meters lead as directed by Engineer-in-Charge.
1.6 Dismantalling of existing duct, grills, diffuers, and other related components complete including
MR disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as Sqm 50.00 250.00 12500.00
directed by Engineer-in-Charge.
1.8 Carriage of material by mechanical transport including loading unloading and
1.1.1 Lime, murrum, building rubbish
2 MASONRY AND PLASTER
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with
2.1 11.3 a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc.
11.3.1 40 mm thick with 20 mm nominal size stone aggregate Sqm 35.00 614.20 21497.00
MR Self-leveling concrete Sqm 38.00 530.00 20140.00
3 PAVING AND WET WORKS
Providing & fixing of 12mm thcik Wooden flooring Ac-5 as per sample approved cost including
wastage and fixing charges complete.
3.2 MR Aluminum Skarting-3" RMT 25.00 450 11250.00
4 PARTITIONS AND WALL CLADDING
Digitally signed by AMIT
DSR/NDSR AMOUNT MARKET AMOUNT
S.NO. DESCRIPTION UNIT QTY RATE
. (DSR) RATE (NDSR)
GLASS PARTITION:- Providing & Fixing Full Height Glass partition using 12mm Thk.
Toughned Glass including framing and fitting complete in all respect
Providing and making partly glazed /partly panelled laminated partition with galvanized steel internal frame
work with 11mm MDF board on either face laminated using 1.0mm laminate in required pattern. Rates are
inclusive of s/f 8 mm clear glass in glazed portion with required moulding
Same as above but finishing of partition with 12 mm gypsum board on one side inplace of mdf and
laminate.Rates are inclusive of taping , jointing of gypboard all complete
PANELLING- Panelling using 12mm thick, 120mins fire rated ply fixed on one side on GI FRAME as per
4.4 MR approved sample and architectural drawings. Aluminium frame to be fixed to walls, floor and RCC Ceiling Sqm 100.00 2850.00 285000.00
using fastners.
LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF, on an existing Plywood
INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool
conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin
Polythene Bags fixed to wall wirh screw, rawel plug & washers and held and in position by criss
cossing GI wire etc. complete as per directions of Engineer-in-Charge.
Providing and fixing aluminium extruded section body tubular type universal HS 3000 Slimline Concealed
Door Closer (having brand logo with ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and
door widthfrom 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc.
complete 14400.04
TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic
4.80 9.97 AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, complete:
4.90 DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door 121.65 486.60
9.82 stopper with necessary screws, etc. complete. Each 4.00
MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH
4.10 MR 123 with Roses & Escutcheon in SS packaged with Mortice lockset 55mm backset, 20 SS Each 2.00 3250.01
forend, SS strike plate and EP Cylinder for all flush doors. 6500.02
4.11 Providing and fixing 600 mmx25 mm H Type handle for Doors approved make and designs as per 6505.38
MR engineer in charge Each 4.00
4.12 Providing and fixing minimium 90-100 kg capacity flooor spring for Doors approved make and 11500.00
MR designs as per engineer in charge Each 4.00
4.13 MR Providing and fixing Glass door lock approved make and designs as per engineer in charge Each 4.00 2850.00 11400.00
Digitally signed by AMIT
DSR/NDSR AMOUNT MARKET AMOUNT
S.NO. DESCRIPTION UNIT QTY RATE
. (DSR) RATE (NDSR)
Providing and fixing false ceiling at all height including providing and fixing of frame work made
of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120
gms/Sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x
1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the
ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed
to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and
other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the
spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80
mm with tapered flanges of 26 mm Each having lips of 10.5 mm, at 450 mm centre to centre, shall be
fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64
5.1 12.45 mm dia x 230 mm long
G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having
flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of
rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing
of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5
x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges
of the board with recommended jointing compound , jointing tapes , finishing with jointing
compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer
suitable for board, all as per manufacturer's specification and also including the cost of
making openings for light
fittings, grills, diffusers, cutouts made with frame of perimeter channels
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with
12.45.1 BIS certification marks) Sqm 1145.95 Sqm 12.00 1355.80 16269.60 0.00
Digitally signed by AMIT
DSR/NDSR AMOUNT MARKET AMOUNT
S.NO. DESCRIPTION UNIT QTY RATE
. (DSR) RATE (NDSR)
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved
texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light
Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS
476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round
galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of
length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of
size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling
using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash
fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster
of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on
periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of
0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre
& 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false
ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall
be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
26.27.1 With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6 Sqm 28.00 2333.60 65340.80
CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm
and made hardwood framings hung from ceiling @1000mm centre to centre with 1 nos of 12mm
thk. fire retardant ply on vertical & 12mm thk. Commercial ply on horizontal surface (straight &
curved). Inclusive of finishing in Paint.
GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral fibre/
gypsum ceiling. In order to make the Mineral Fiber/ gypsum ceiling higher than the Gypsum
Ceiling by upto 100mm as per drawings. (visible surface of gypsum band to not exceed
100mm) including plastic emulsion paint.
6.0 FINISHING WORKS -
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to
prepare the surface even and smooth complete.
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile
Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including
applying additional coats wherever required to achieve even shade and colour.
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile
6.3 13.85 Organic Compound ) content.
Digitally signed by AMIT
DSR/NDSR AMOUNT MARKET AMOUNT
S.NO. DESCRIPTION UNIT QTY RATE
. (DSR) RATE (NDSR)
With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less 70.35
13.85.1 than 50 grams/ litre Sqm 12.00 844.20
FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface with as
approval of the Architect. (Only film surface area shall be measured and paid).
Providing and fixing Zebra blind of approve colour fabric with all required powdercoated channel
6.6 M.R. ,hardware material aluminium clip Sqm 15.00 3850.00 57750.00
,pulling cord etc .all complete
6.7 MR Wooden Panelling Groove Black Polish Sqm 100.00 450.00 45000.00
6.8 MR Repair of Old Window Handle Change & Silicon filling in windows to stop water leakage Job 1.00 35000.00 35000.00
6.9 MR Repair of Old existing Blinds Job 1.00 15000.00 15000.00
Digitally signed by AMIT
SCHEDULE OF QUANTITIES - ELECTRICAL WORKS
DSR/ Total Amt. Total Amt.
S NO DESCRIPTION UNIT QTY RATE
NDSR DSR (INR) NON-DSR
A POINT WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable in surface /
1 1.10 recessed medium class PVC conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated
copper conductor single core cable etc as required.
Wiring for group controlled (looped) light point/ fan point/call bell point
2 1.55 (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable in surface / recessed PVC conduit, and
Wiring for light/ power plug with 2x4 sq mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed medium class PVC conduit
Wiring for1light/
4x4 sq mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed medium class PVC conduit
5 1.24 alongwith
Nos 4 sq.following
fixing mm FRLSmodular
PVC switch/ socket on the existing modular
plate & switch box including connections but excluding modular plate etc. as
1.24.4 3 pin 5/6 amp socket outlet Each 8 122.00 976.00
1.24.5 6 pin 15/16 amp socket outlet Each 6 197.00 1182.00
6 1.26 Supplying and fixing modular blanking plate on the existing modular plate
& switch box excluding modular plate as required.
7 1.27 Supplying and fixing following size/module, GI box along with Modular base &
cover plate on existing modular metal boxes etc. as required.
B SUBMAIN AND CONTROL WIRING
1 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following
sizes of FR PVC insulated copper conductor, single core cable in surface/
recessed steel conduit as required
1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 50 233.00 11650.00
1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 40 275.00 11000.00
Digitally signed by AMIT
DSR/ Total Amt. Total Amt.
S NO DESCRIPTION UNIT QTY RATE
NDSR DSR (INR) NON-DSR
1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 30 334.00 10020.00
1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 10 439.00 4390.00
1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 5 1005.00 5025.00
1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 5 1365.00 6825.00
Supplying and making end termination with brass compression gland and
1 9.1 aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE
aluminium conductor cable of 1.1 KV grade as required.
MR Supply of following XPLE armourned 1.1 KV grade conforming to
I.S.7098/1554Aluminium Conductor Cables :
Supply of following sizes of PVC sheathed PVC/XLPE insulated
Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098
part-1 / IS:1554 part-1 respectively & ISI marked.
(d) 3.5 C x 50 Sqmm XLPE cable Metre 0 403.00 0.00
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in
the existing MCB DB complete with connections, testing and commissioning
etc. as required.
2.10.1 Single pole Each 4 256.00 1024.00
Supplying and fixing following rating, four pole, (three phase and neutral), 415
volts, residual current circuit breaker (RCCB), having a sensitivity current 30
mA in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
Supplying and fixing following way, vertical type three pole and neutral,
sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with
2 2.5 tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,
powder painted including earthing etc. as required. (But without
MCB/RCCB/Isolator)
Digitally signed by AMIT
DSR/ Total Amt. Total Amt.
S NO DESCRIPTION UNIT QTY RATE
NDSR DSR (INR) NON-DSR
Supplying and fixing following rating, double pole, (single phase and
neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity
current upto 300 milliamperes in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS
MR Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 Set 6 46.05
way for floor box.
MR Supply, Installation, Testing and Commissioning of USB port Socket in single Each 2 715.49
MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor Set 2 371.29
1.24 Supplying and fixing following modular switch / socket on the existing modular
4 plate & switch box including connections but excluding modular plate etc. as
1.24.7 TV socket outlet Set 1 148.00 148.00
1.24.6 Telephone Socket Outlet Set 4 148.00 592.00
Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper
1.18 conductor, unarmoured telephone cable in the existing surface / recessed
steel / PVC conduit as required.
MR 20 Pair Metre 0 82.03 0.00
MR 50 pair Metre 0 166.94 0.00
Supply, Installation, Testing and Commisioning of Galavanized Iron (GI)
Raceways along with required suitable number of GI couplers for joining
raceways and fixing GI brackets and all accessories complete in all respect as
per the directions of engineer in charge
(a) 300mmx38mm(GI) - 3 compartment Metre 0 1279.38 0.00
(b) 225mmx38mm(GI) - 3 compartment Metre 5 1027.52 5137.60
MR Supply, Installation, Testing and Commisioning of Junction boxes for direct
access to cables at the intersection of raceways supplied completely with
base and cover plates, height adjustable junction box 65- 90 mm including all
6 accessories complete in all respect as per the directions of engineer in charge
Digitally signed by AMIT
DSR/ Total Amt. Total Amt.
S NO DESCRIPTION UNIT QTY RATE
NDSR DSR (INR) NON-DSR
Supplying and fixing of following sizes medium class PVC conduit aong with
accessories in surface/ recess including cutting the wall and making good
8 the same incase of recessed
conduit as required
4.1 Supplying and Installation of following size perforated of painting with
powder coating M.S. cable trays of perforation of not more than 17.5%
9 in convinient sections, joined with connectors suspended from the cieleing
with MS suspenders including bolts and nuts painting suspenders etc as required
4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 0 1137.00 0.00
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt
5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for Metre 0 1162.00
connections etc. as required.
5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for Metre 0 244.00
connections etc. as required.
5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing Metre 0 70.00
Installation of exhaust fan in the existing opening, including making good Each 0 450.00
5 1.50.1 the damage, connection, testing, commissioning etc. as required. Upto 450mm 0.00
Supply, Installation, Testing and Commisioning of pre-wired round shape
Recessed 15Watt LED Down Lighter fitting complete with all accessories,
housing made of Aluminium Die-cast, System Efficasy >100 LPW, CRI >80,
CCT of 4000K. suitable for 220 V, 50 Hz, The luminare rated life (L70) >50000
Hours with High efficiency driver with inbuild surge protection, over voltage
protection, short circuit protection and operating at >0.95 PF., BIS approved
Driver including connection with 1.5 sq. mm FR PVC insulated, copper
conductor, single core cable and earthing etc as required.
Digitally signed by AMIT
DSR/ Total Amt. Total Amt.
S NO DESCRIPTION UNIT QTY RATE
NDSR DSR (INR) NON-DSR
Supply, Installation, Testing and Commisioning of 300X1200 36- 40Watt LED
fitting complete with all accessories, housing made of Aluminium Die-cast,
System Efficasy >100 LPW, CRI >80, CCT of 4000K. suitable for 220 V, 50 Hz,
The luminare rated life (L70) >50000 Hours with High efficiency driver with
inbuild surge protection, over voltage protection, short circuit protection and
operating at >0.95 PF., BIS approved Driver including connection with 1.5 sq.
mm FR PVC insulated, copper conductor, single core cable and earthing etc as
Pendant luminaire Ring with HPE (High Performance Efficiency) LED (Light
Emitting Diode) system power: 30 W, Luminous flux of luminaire 3000
lm,Colour temperature of 4000 K, neutral white, CRI > 80, , THD<5% , SDCM
<3 , R9>0 230 V constant current driver, 70% of luminous flux after 50,000
8 MR operating hours; Energy efficient LEDs, Direct light emission, Luminaire profile Nos. 1 17000 - 17000.00
in aluminium, Polyester powder black coloured coat applied over a 5- stage pre-
treatment, Prismatic diffuser for a homogenous light distribution, ZHLS (ZERO
HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Protection
class I, IP20, Ø = 600 mm, W = 100 mm, H =67 mm, PL = 1500 mm
SITC of Recessed mouted PDC lowdepth(height should not be more than 35mm) 13200
COB downlights with maximum 12 Watt with minimum 1320 lumen.The product
should be SMD based & have non integral isolated driver with 2KV inbuilt
9 MR surge protection. THD<10%, PF >0.9,Product should have life class of 50K Nos. 6.00 2,200.00
burning hour at L70 B50 parameter, Luminiare operating temp 0 D to 45D.
Internal wiring should have teflon coted multi strand wires and external wire
should have PVC coated multistrand wires.
10 MR Providing & Fixing Pop-up Box 8 Module Nos 2 32000.00 32,000.00
Total of Electrical items 216796.47
Digitally signed by AMIT
Item Specifications Qty Rate Amount
Supplying and placing in position of main table as per photograph/drawing .The table
shall be made out of 25mm thick pre -laminated particle board of approved shade. The
working and non working edges shall be finished with machine pressed with 2mm PVC
egdge banding. The table top shall be supported with MS powder coated "C" shape leg of
size 50mm x 50mm with connectors of size 40mm x 40mm. The front modesty are made
out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The
table shall be provisioned with Side unit of overall size: 1800mm(L) x 450mm(D) x
1 Director Table 675mm(H) . Side storage having a provision for three equal drawer unit and two 1.00 1,50,000 1,50,000.00
openable shutter & one open storage with shelf in it. The Side unit top shall be made out
of 18mm thick pre laminated particle board and rest all storage to be made out of 18mm
thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module
fliptop box for wire passing or as per site requirement.Main Table Dimension (L)1800mm
X (D) 900mm X (H)750mm overall Side Runer Dimension (L)1800mm X (D) 450mm X
Supplying and placing in position of 360 degrees revolving high back chair . The chair of
Size :- (W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be
ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS
Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The chrome
Director High Back plated loop armrest with padded upholstery is provided for extra comfort. The chair shall
Chair be provided with pneumatic height adjustment which shall have stroke of 10.0
+/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-
35 (+/- 2kg /m3) Dimensions The backrest has a foam of 28kg/m3.
Supplying and placing in position of medium back cantilever chair of size: (W)610mm X
(D)505mm X (H)990mm.A contemporary design with an all black finish, . Material &
subtype:Premium Leatherette, Colour & Colour Family:Black, Dimension(W)610mm X
Director Visitor (D)505mm X (H)990mm, Back Type:Cantilever, Base:Cantilever Frame, Base
3 Type:Cantilever, Maximum Seating Height:19".The Seat & back are made up of 12mm 4.00 22,800 91,200.00
thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has
foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3.
Supplying, and placing in position of sofa with premium Leatherette upholstery adds
class to the soft cushioned backrest and seating. Material & subtype:Premium
Leatherette, Colour & Colour Family:as per requirement, Seating Height:16.14"
,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone.
steam beech solid wood have used for framing construction of sofa .The seat cushion is
4 2 seater sofa made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 2.00 42,500 85,000.00
1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch
strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200
gsm. 2 seater Dimension(L)1390mm X (D)750mm X (H)710mm
Digitally signed by AMIT
Item Specifications Qty Rate Amount
Supplying, and placing in position of sofa with premium Leatherette upholstery adds
class to the soft cushioned backrest and seating. Material & subtype:Premium
Leatherette, Colour & Colour Family:as per requirement, Seating Height:16.14"
,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone.
steam beech solid wood have used for framing construction of sofa .The seat cushion is
5 Single seater Sofa made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.00 28,650 28,650.00
1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch
strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200
gsm. 2 seater Dimension(L)1390mm X (D)750mm X (H)710mm
Supplying and placing in position of conference table of required size as per
image/drawing. The work surface top should be of thickness 42mm top prelaminated
particle board with 2mm thick PVC edge banding. The side panel are made up of 36mm
8 Conference Table thick prelaminated particle & modesty panel are made out of 25mm thick prelaminated 1.00 95,000 95,000.00
particle board with 2mm thick PVC edge banding. The wire carrier should be made from
0.6mm thick CRCA & powder coated 40- 50 microns. Also having a provision of 6 module
flip top box & metal raceway for wire flow.
Supplying and placing in position of 360 degrees revolving medium back chair . The Craze
chair of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be
ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS
Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The chair shall
9 Medium Back chair 8.00 18,500 1,48,000.00
be provided with pneumatic height adjustment which shall have stroke of 10.0 +/-
0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35
/m3) The backrest has a foam of 28kg/m3.
The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back
Openable Shutter panel is made of 09mm thick MDF of approved shade. All the edges of storage surface
16 shall be provided with machine pressed imported PVC lipping glued with hot melt EVA
glue free from any VOC with free groove handle and suitable lock. All exposed area PVC
Total Amount 7,38,500.00
Total Amount 7,38,500.00
Digitally signed by AMIT
S.No. Description UOM Qty Rate Amount
A. UTP Components for Data
Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors
1 for Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, Mtr 250 58.00 14500.00
250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable
termination at Work Station end. Keystone Unshielded Outlet, 180DG C6
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable
3 termination at Work Station end Redantant . Keystone Unshielded Outlet, Nos. 4 240.00 960.00
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7
4 feet) for information outlet (I/O) to end user device connectivity.High Speed Nos. 2 275.00 550.00
Gigabit 24AWG U/UTP Patch Cord, LSZH, C6
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3
5 feet) for information outlet (I/O) to Rack End Redantant device Nos. 1 235.00 235.00
connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6
Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel for
CAT6 cable termination at rack end. Data Active
Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel for
CAT6 cable termination at rack end. Data Active Redandant
B. Voice 0.00
Digitally signed by AMIT
S.No. Description UOM Qty Rate Amount
Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors
8 for Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, Mtr 50 58.00 2900.00
250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6
Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable
termination at Work Station end. Keystone Unshielded Outlet, 180DG C6
Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled
Staggred Jack Panel for CAT6 cable termination at rack end. Voice Active
Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3
11 feet) for information outlet (I/O) to end user device connectivity. (Rack end), Nos. 1 235.00 235.00
High Speed Gigabit 26AWG Patch Cord, LSZH, C6
Supply , Installtion , Testing and Comissioning of HDHMI Cable 10-15 Mtr
Supply , Installtion , Testing and Comissioning of 4 Port British Style Shuttered
Face Plate white for I/O fixing at user side
Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled
Staggred Jack Panel for CAT6 cable termination at rack end. Riser Active
TOTAL 74580.00
Digitally signed by AMIT
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT SFC.pdf
Tender Document
SCC SFC.pdf
Tender Document
GCC upto amend6.pdf
Tender Document
Instruction to Bidder for online Bid Submission.pdf
Tender Document
Forms.pdf
Tender Document
Tender Drawings.pdf
Tender Document
List of makes.pdf
Tender Document
TECHNICAL Circular upto 27 amendment.pdf
Tender Document
BoQ SFC.pdf
Tender Document
corrigendum-2280-Corrigendum.pdf
pdf • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .