REPAIR TO SINGLE OFFR ACCN GUEST ROOM AND OFFRS MESS OF EAST SIDE OF LEHL MARG INCLUDING TELEPARA UNDER GE S BINNAGURI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified.

Material and labour for Vitrified Ceramic joint free tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over and including15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified .

Material and labour for Vitrified Ceramic joint free tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in verticle surfaces such as skirting / dado over and including 10 mm thick screed bed / backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

Material and labour for glazed ceramic coloured / digital printed of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified. (screed bed shall also deemed to be included in the quoted rate by the contractor ).

M&L for coloured Non skid joint free ceramic tiles (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified.

M&L for coloured Non skid joint free ceramic tiles (Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.38 Sqm, vertical surfaces, in skirting etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match with the shade of tile including 15 mm thick screed bed in cement mortar 1:6 complete all as specified.

Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site complete all as specified and removal off the site.

Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm each complete all as specified and removal off the site.

M & L pressed steel door frame of size 105mm x 60mm with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc complete as specified.

S&F 30mm flush shutter, solid coare construction, with block board core and plywood face panel, commercial type on both side include for the provision of suitable blocks for mortice locks, latches or other fittings etc complete all as specified.(Make- SA Plywood/Centuri/Kit Ply)

S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified .

S&F 150 mm size aluminium anodised door handles complete all as specified .

S&F 125 mm butt hinges medium weight cold rolled mild steel complete all as specified .

M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified .

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer complete all as specified .

S&F in Repairs factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars docetailed or welded complete all as specified.

S&F in Repairs factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with out glazing bars docetailed or welded complete all as specified.

S&F in Repairs steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified.

S&F of mild steel work such as window guard bars and similar work conforming to Fe – 290 Grade – E 165 complete all as specified.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified.

S&F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples and beads complete all as specified.

S&F for 3mm thick sheet glass fixed with oil putty/nut bolt in square n.exc 0.5 sqm in each pane complete all as specified

Taking down cement plaster on wall / Ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified.

Material and labour rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces mixed with integral water proofing compound all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: WPC shall be measured and paid for separately as 'Supply only'.

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface complete all as specified.

M&L for rendering 5mm thick plastering in cement mortar (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement complete all as specified .

M & L for preparing new Plastered surfaces of walls and finishing the walls with two coats of Acrylic smooth exterior paint of required shade for New work over and including priming one coat of exterior primer all as per manufacturer's specification and as specified.

M&L for prepartion of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified.

M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified.

.M & L for complete removal of existing treatment and finishing the walls with two coats of Acrylic smooth exterior paint of required shade for Old work over and including priming one coat of exterior primer all as per manufacturer's specification and as specified.

M&L for preparation of old decorated distempered surfaces of walls and applying one coat of acrylic based distemper emulsion of any tint/shade including necessay wall putty/white cement wherever required to fill the small hole and cracks etc complete all as specified.

M&L for preparation of old decorated distempered surfaces of walls by applying two coat of acrylic based distemper emulsion of any tint/shade including a coat of wall care putty to get a even and smooth surfaces of walls complete all as specified.

M&L one coat of white wash on walls over old surfaces of wall incl preparation of surfaces complete all as specified.

M&L one coat of white wash on ceiling surface including preparation of old surfaces complete all as specified.

M&L for preparation of old wooden based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint 1st quality complete all as specified.

M&L for preparation of old steel and iron surfaces of any description not otherwise described, over 10 Cm width or girth and applying one coat of synthetic enamel paint 1st quality complete all as specified.

Taking down old chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame) complete all as specified.

S&F for factory made solid pannel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside the solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the ms frame welded/sealed to the stiles and rail with suitable pvc sheet beading, and jointed together with solvent cement, supplied and fixed in repair in the frame at site on per specification and drawings complete all as specified.

S&F for solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed incl fixing of hold fast as per specification and drawing complete all as specified .

S&F 100 mm long stainless steel butt hinges complete all as specified and directed.complete all as specified.

S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified.

S&F 150 mm long aluminium anodised door handles complete all as specified.

Supply and fix as in repair for CP brass tubular towel rail 60 cm long between flanges all as specified. Make: Essco Cat No AEC-1111or equivalent.

Supply and fix as in repair for pillar taps (central hole basin mixer) with U shaped round casted spout with 3" long pipe connection with aereator made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as directed. Make: Essco Cat No MQT 516A or equivalent.

S&F in repair swivel shower of brass CP with shower arm 125 mm size for fixing with 15 mm bore GI pipe complete all as specified

S & F in repair Grating doom 125 mm dia with waste hole/without hole of PTMT (Minimum weight 40gms) complete all as specified.

S & F bib taps brass chromium plated 15mm bore screwed down, screwed for iron pipe or for brass ferrule. Make:-ESSCO Cat No MQT 511 or equivalent.

Supply & fix as in repair for angle valve made of brass chromium plated screwed at ends for iron pipe for 15mm bore for basin inlet connection complete all as specified Make: Essco Cat No MQT-526 or equivalent.

Supply and fixing in repair of sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm. Make – Nirali, Elegance unique or equivalent as in the list of makes.

Supply and fix in repair vitreous China wash basin white, flat back, size 580 x 460 mm with CP brackets (02 Nos), CP waste coupling full threaded 32mm dia, including cutting for pinning in ends of brackets and making good disturbed surfaces with CM (1:4) complete all as specified. Make:-(i) HINDWARE Cat No 10064 (Melisa) or equivalent as in the list of makes.

S&F in repair 10 ltr capacity PVC flushing cistern (Duel flush) low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified.

Supply and fix as in repair for Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and directed. Make : Hindware Cat No 20042 for squatting pan.

Supply and fixing in repair for vitreous China (white) wash down water closet pan (pedestal pattern) of size 935 x 425 x 780mm with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts, PVC seat cover (white) with SS fittings and making all necessary connections complete as specified. Make: Hindware Cat No 20011 (Sleek) for water closet or equivalent.

-----Blank-----

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as specified .

S&F Brass CP health faucet 25mm dia with crutch or butterfly handle with 1 mtr flexible tube and hook complete as fixed in repair complete all as specified MAKE : ESSCO cat no. EHS-551 or equivalent as in the list of makes.

S&F in Repairs PVC connection pipe with nut at both ends n.exc. 450mm for hot and cold water complete as fixed in repair.complete all as specified.

Supply and fixing PVC corrugated waste pipe 32mm bore 800mm long with PTMT couplings all as specified. Make: Polytuf Cat No 4007 or equivalent as in the list of makes.

S&F in repair 20mm dia 1.00mm thick , Stainless steel, Curtain rod with fixing ornamental brackets etc. complete as specified.

Taking up or down GI tubing 15mmbore pipe and connection including cleaning for refixing or removal from site of work complete all as specified .

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site of work complete all as specified.

S&F 15mm bore medium grade GI pipe with all fittings laid in floors fixed to wall etc complete all as specified

S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified.

Demolition slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified .

M&L for 16-18 mm thick Granite work (table rubbed and polished) in decorative shelves, steps ,pillers ,jambs,coocking plateform etc laid over 15mm screed bed in CM (1:6) with chemfering of edge including pointing in white cement with pigment to match with shade of granite including grinding & mirror polishing with wax polish complete all as specified and as directed.

M & L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupbord door/shelves/wall panelling including 6 mm thick wooden leaping and dismantling of old boarding complete all as specified (NOTE : the cost is including polished to wood surfaces) (Make : Kitply/Anchor/Green Industrees Ltd)

S&F 75 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-22 complete all as specified.

S&F 100 mm long Aluminium anodised barrel tower bolts complete all as specified

S&F 100 mm long aluminium anodised door handles complete all as specified.

M & L for 75mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.

Supply and fix as in repair for stop valve, brass chronium plated, 15mm bore screwed down high pressure screwed both ends fixed to GI pipe all as directed. Make : Essco Cat No 513A/513B or equivalent

Hacking out old broken glass (any thickness, size, quality or description) from wooden, metal frame including punching or drilling out old glazing pins/spring clips and providing new ones for 3mm thick sheet glass fixed with oil putty/nut bolt in square n.exc 0.5 sqm in each pane complete all as specified

S & F in repair stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified.

Dismantling water tank exc 500 & n.exc 1000 ltr capacity and removing to store complete all as specified.

Material and labour for hoisting and fixing rotational moulded polyethylene(double layer) water storage tanks 1000 lit capacity (Cylinderical vertical), ISI marked(IS-12701:1996) hoisted and fixed in position including inlet, oulet, over flow connection, ball valves etc complete all as specified.

Supply and fix in repair powder coated (minimum 50 micron) anodised aluminium frame for doors, windows, ventilators,partition with one or more rebates with stainless steel screws /including PVC protector sheeting and joining cleat for fixing etc. including taking down old one complete all as specified.

S&F in repairs powder coated aluminium sliding window sliding on 3 track one shutter glazed with and including 4mm thick plain sheet glass and other shutter with stainless steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire stapples rubber gasket stopper aluminium grill of aperture size of grill 70mm , handle 100mm, frame of section 100mm X 45mm X 1.55mm and of shutter of section 40mmX 20mm X 1.55mm complete all as specified.

M& Lin repair for fabrication and fixing of powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6mm x 44.45mm x 2mm and section of bottom and top rail of section114mmx44.45mmx2mm thick and and lock rail shutter frame of 83mm x 44.45mm x 2 mm with and including panels of 5.5 mm thick plain/frosted float glass,and with anodised aluminium snap beading of size 18.2mmx16.66mm scred for fixing fully including double action door spring hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and all necessary fittinngsand EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter ,1 no heavy duty door shutter 1no 200mm long aluminium tower bolt per shutter including taking down old one complete all as specified.

S&F in repairs 150 mm overall length cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.

Supply and fixed in repair aluminium (extruded section body) door closer hydraulically regulated designation No-3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified. Make: Godrej Cat No 8156 or equivalent as in the list of makes.

S. G. CONSTRUCTION (BID ID -3129160)

L. B. SHARMA (BID ID -3128988)

GAJMER WORKS (BID ID -3129298)

R K AGARWAL (BID ID -3129048)

M/S NIKITA ENGINEERING CO (BID ID -3129254)

SHRI R S YADAV (BID ID -3129314)

SS SHARMA (BID ID -3129304)