REPAIR/MAINT OF INTERNAL WIRING ON OFFRS ACCN AT PANGODE MIL STN UNDER GE (ARMY) TRIVANDRUM

Amount

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site after accounting in credit schedule and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring complete for one light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor partly concealed in wall through PVC conduit and conduit accessories and partly surface on ceiling/ roof through PVC conduit and accessories of suitable size with modular metal flush boxes of suitable size & modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, multistranded single core green colour copper conductor for earth continuity connected to earth dolly all as specified and directed Note: Cost of modular metal flush boxes concealed in wall with suitable white cover plate for mounting switches/ sockets, regulators, bell push etc and cost of cutting chases & making good to disturbed surface with cement mortar, if required any shall be deemed to be included in the quoted rate.

All as per item No. 2.00 here in before, but for one ceiling/ exhaust fan point controlled by one way switch and regulator complete all as specified and directed.

All as per item No. 2.00 here in before, but for one bell/ buzzer point controlled by one bell push button independent complete all as specified and directed.

All as per item No. 2.00 here in before, but for one 3 Pin, 5 Amps socket outlet on same board complete all as specified and directed.

All as per item No. 2.00 here in before, but for one 3 Pin, 5 Amps socket outlet on independent board complete all as specified and directed.

All as per SI item No. 2.00 here-in-before, but for one switch socket outlet, 3 pin 15 Amp on independent board with 4.00 Sqmm FRLS cable and 4.00 sqmm cable earth continuity wire complete all as specified and directed.

S&F Modular switch, one way 6 Amp, 240 Volt 1 module complete all as specified and directed.

S&F in repairs Modular switch, one way 6 Amp, 240 Volt 1 module complete all as specified and directed.

S&F Modular switch, one way 16 Amp, 240 Volt 1 module complete all as specified and directed.

S&F in repairs Modular switch, one way 16 Amp, 240 Volt 1 module complete all as specified and directed.

S&F Modular bell push, one way 6 Amp, 240 Volt 1 module complete all as specified and directed.

S&F in repairs Modular bell push, one way 6 Amp, 240 Volt 1 module complete all as specified and directed.

S&F Modular Fan step regulator, 120W - 2 module, 240 Volt , 50 Hz suitable for ceiling fans of all sweep complete all as specified and directed.

S&F in repairs Modular Fan step regulator, 120W - 2 module, 240 Volt , 50 Hz suitable for ceiling fans of all sweep complete all as specified and directed.

S&F modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F in repairs modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F modular Socket 6A/16A, 240 Volts, 2/3 pin combined 2 module complete all as specified and directed.

S&F in repairs modular Socket 6A/16A, 240 Volts, 2/3 pin combined 2 module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 1 Module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 2 Module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 3 Module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 4 Module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 6 Module complete all as specified and directed.

S&F in repairs Modular metal flush box 1/2 Module complete all as specified and directed. Note : The contractor will ensure to remove old metal box and fix new, after fixing clear the surface of wall/ceiling with putty and paint to match the existing.

S&FModular metal flush box 3 Module complete all as specified and directed.

S&F Modular metal flush box 4/5 Module complete all as specified and directed.

S&F Modular metal flush box 6 Module complete all as specified and directed.

S&F in repairs ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F in repairs lamp holder, angular type, PVC/ Polycarbonate type with back plate suitable for batten fittings ccomplete all as specified and directed.

S&F in repairs buzzer, ding dong, AC, 230 volts, single pole complete all as specified and directed.

S&F in repairs sheet metal enclosure Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 Volts complete all as specified and directed

S&F distribution board made out of sheet metal enclosure (CRCA sheet powder coated), dust and vermin proof, double door, TPN 4 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urethane (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for enclosing/ fixing MCB SPN, SP etc including taking down existing unserviceable one from site and removing from site complete all as specified and directed.

S&F in repairs amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB), SP, 5 to 32 Amps current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

S&F in repairs amp rating 415V, 10KA 'C' curve miniature circuit breaker (MCB), TPN 63 Amps current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

Taking down carefully existing serviceable Ceiling fan/ Wall mounted fan including removing cable end connections, etc. and removing the fan for keeping in safe custody, re-hanging the ceiling fan with down rod after rewiring including clamps, hooks, hold fasteners etc and connecting up, including making electric connection from ceiling rose or connector to fan complete all as specified and directed.

Supply and fixing in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Taking down carefully existing serviceable exhaust fan including removing cable end connections, etc. removing the fan for keeping in safe custody, re-fixing the exhaust fan connecting up after rewiring, including making electric connection from ceiling rose/ connector to fan complete all as specified and directed.

S&F in repairs exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

Taking down carefully existing serviceable geyesers of capacity 25Ltrs, including removing cable end connections, etc. removing the geyesers for keeping in safe custody, re-fixing the geyesres with provision of new suitable MS bolts, grouted to wall and connecting up including provn of new 3 core sheathed multi stranded flexible copper conductor cable, including making good to the disturbed surfaces and testing complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

S&F one light opal glass with nickel finish wall lamp 1 x 7 Watts, warm white, body dark grey colour, aluminium die-cast with IP-65 protection including LED bulb complete all as including taking down existing unserviceable one and removing from site complete all as specified and directed. Make: Jaquar cat No. DWL-NKL-WLRB0480SE27 or equivalent make of Philips/Bajaj/Wipro/Osram/GE/Havells/Goldmedal

S&F smart extruded aluminium LED batten (4ft) with higher efficacy 1x 20W, 220V, AC decorative box type with driver, warm/cool white (as directed by Engr-in-Charge), double sided connection, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, including taking down existing unserviceable one and removing from site complete all as specified and directed. Make: Jaquar Cat No. SSB-WHT-LKBS01S020XC or equivalent make of Philips/Bajaj/Wipro/Goldmedal

Fixing only LED light fitting 1 x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Note : The item will be issued under Schedule B store.

S&F in repairs LED light fitting mirror type with high output diffuser 2 feet, 10 watts, 220 V, AC decorative type with warm/cool white (as directed by Engr-in-Charge), driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F sub-main wiring with 4 runs of 6 sqmm single core PVC insulated, FRLS, unsheathed cable with stranded copper conductor, 1100 Volts grade drawn through and including PVC conduit 20/25mm bore with all fitting such as Tees, Bends, Elbows, etc., fixed surface on wall/ceiling including 1 run of 6 Sqmm multistranded PVC insulated, FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly, including taking down old unserviceable wiring complete all as specified and directed. NOTE: 4 runs of 6.0 sqmm copper cables and one run of 6.0 sq mm copper cable along with white colour PVC conduit/ conduit accessories will be measured as one unit length.

S&F sub-main wiring with 2 runs of 4 sqmm single core PVC insulated, FRLS, unsheathed cable with stranded copper conductor, 1100 Volts grade drawn through and including PVC conduit with all fitting such as Tees, Bends, Elbows, etc., fixed surface on wall/ceiling including 4 Sqmm multistranded PVC insulated, FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly, including taking down old unserviceable wiring complete all as specified and directed. NOTE: Two runs of 4.0 sqmm copper cables and one run of 4.0 sq mm copper cable along with white colour PVC conduit/ conduit accessories will be measured as one unit length.

S&F distribution board, vertical, made out of sheet metal enclosure (CRCA sheet powder coated), dust and vermin proof, double door, VTPN 4 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urethane (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for enclosing/ fixing MCCB, MCB TP/SPN/SP etc including taking down existing unserviceable one from site and removing from site complete all as specified and directed.

S&F in repairs MCCB, triple pole and neutral (four pole), 100 Amp, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 16 KA including making incoming and outgoing connections complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire of size 4mm dia by means of GI Bolts, Nuts, check nuts and washers of the earth and thimbles and other end of the earth GI wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade raised up to a level of 50cm above ground level with plug at top, earthing pit in PCC (1:3:6) type C-1 RCC pre-cast (1:2:4 type B-1) cover slab of 50 mm thick using 8.00mm dia CTD bars reinforcement both ways at 140 mm centre to centre with handle, 20 mm dia GI pipe medium grade for watering pipe, wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/ loose soil, returning, refilling and removing of surplus soil to a distance not exceeding 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed, including taking down existing unserviceable earthing complete all as specified and directed.

JEETH CONSTRUCTION (BID ID -3387879)

SUPER COOL (BID ID -3389455)

S L ELECTRICAL WORKS (BID ID -3397061)