Loading
Loading…
Loading…
Tender Value
₹3.5 L
EMD Value
₹6,919
Closing Date
8 Oct 2026, 3:00 pm6d left
EE, Engg. cell, DSE, Agt.
EE, Engg. cell, DSE, Agt.
Repairing of existing class room of BBMC College, Agartala, West Tripura by providing fitting fixing of prelaminated particle board with other allied works during the year 2026-27
2026_DDSE_77394_1
36/EE/ENGG.CELL/DSE/2026-27
Open Tender
Civil Works
Percentage
30 days
Agartala
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹6,919
1 Oct 2026
1 Oct 2026
9 Oct 2026
1 Oct 2026
8 Oct 2026
1 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | 16.2 Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board grade-I, type II conforming to IS : 12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P. brass / stainless steel screws all complete as per architectural drawing and the direction of Engineer-in-charge : 16.2.2 Prelaminated particle board of approved quality with decorative lamination on both side. | 79.2 | Sqm | 1,131.6 | ₹89,622.72 |
| 2 | 16.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge.
(Glazing and paneling and dash fasteners to be paid for separately) :-16.1.1 For fixed portion of approved quality:-16.1.1.2 Powder coated aluminium ( minimum thickness of powder coating of 50 micron ). | 333.4 | Kg | 516.4 | ₹1,72,167.76 |
| 3 | 8.18 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.8.18.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | 7.56 | Sqm | 3,720.6 | ₹28,127.74 |
| 4 | 12.41 Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture
[Payment shall be made after submission of Test
Certificate issued by the Manufacturer] :
12.41.1 New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 348.18 | Sqm | 160.9 | ₹56,022.16 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.74 MB
DNIeT.pdf
Tender Documents • 4.05 MB
BOQ_78774.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .