Electrical Work-CSPZ

Amount

Electrical Work

OD19248/2023-2024:Supply / I/T/C 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

OD17003/2023-2024:Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1 kv grade of following size in the existing surface as required (a) Upto 35 sq. mm (clamped with 1mm thick saddle)

OD17004/2023-2024:Supply and fixing of PVC Batten/ angle holder including Connection etc as required.

OD17005/2023-2024:Supply and fixing of following piano type swich/ socket on the existing switch box/ cover including connection etc as required. (d) 6 pin 15/16 amps socket outlet

OD17006/2023-2024:Supply and fixing of following piano type swich/ socket on the existing switch box/ cover including connection etc as required. (c) 3 pin 5/6 amps socket outlet

OD17007/2023-2024:Supply and fixing of following piano type swich / socket on the existing switch box/ cover including connection etc as required. (b) 15/16 amps switch

OD17008/2023-2024:Supply and fixing of following piano type swich / socket on the existing switch box/ cover including connection etc as required. (a) 5/6 amps switch

OD17009/2023-2024:Supply and fixing following rating, double pole, 240 volt, isolator in the existing MCB DB complete with connection, testing and commissioning etc. as required. (A) 63 Amp.

OD17010/2023-2024:Supplying and fixing 5amps,to 32 amps rating, 240 volts, "C" curve miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB complete with connection testing and commissioning etc, as required. (A) Single Pole

OD17011/2023-2024:Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (a) upto 450 sqmm sweep

OD17012/2023-2024:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 8 way Double Door

OD17013/2023-2024:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. (b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

OD17014/2023-2024:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. (a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

OD17015/2023-2024:Supplying & fixing metal box of 180mm X 100mm X 60mm deep(nominal size) on surface or recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6pin 5/6 &15/16 amps socket outlet and piano type switch, connection painting etc. as required

OD17016/2023-2024:Rewiring for light point /fan point /exhaust fan point /call ball point with 1.5sq.mm FRLS PVC insulated copper conductor single core cables earth wire in existing surface/recessed steel/ pvc conduit i/c dismentaling as reqd. etc as required. Group C

OD17017/2023-2024:Wiring for light point /fan point /exhaust fan point /call ball point with 1.5sq.mm FRLS PVC installed copper conductor single core cable in surface / recessed PVC conduit, with piano type switch phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5sq.mm. FRLS PVC installed copper conductor single core cable etc as required. Group C

OD17018/2023-2024:5.16:Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

OD17019/2023-2024:5.1:Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

OD17020/2023-2024:"7.6.1:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm"

OD17026/2023-2024: Supply of 15'(380mm)sweep 1400 rpm heavy duty Exaust Fan complete with ring, blade etc as required. ISI marked.

Electrical Work

122.1.8:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-3C*6 sqmm

122.2.39:S/I/T/C of LED Tube type luminaire 20 Watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient LEDs with the following:(a) Total system wattage 20 watt +/- 5%(b )Luminous efficacy lumens/watt >=95 (c)Power Factor >=0.95

Bidder Name

bharat electricals & electronics