Construction of Veterinary Dispensary building at Kehnwal Tehsil Sadar Distt. Mandi

Amount

Cutting in earth work in all kinds of soil such as pick work , jumper work, pick jumper work, pick jumper blasting work, jumper blasting work, blasting work (soft and hard rock) conglomerate rock including/ chiseling wedging out of rocks (where blasting is prohibited), saturated soil and their intermediate classification of soil including ramming and de-watering where required as per the geometrics, grades and levels shown on the drawings, including clearing of jungles uprooting of trees, vegetation, grass wood trees and sapling of all girth upto any heights/depths and removal of rubbish up to any distance outside the periphery of the area including staking the useful material along the road side and disposal of all unserviceable materials through all modes of transportation with in all leads and lifts. Any loss to public or private property during the course of execution shall be the responsibility of the contractor, which shall have to be duly compensated by him at his own cost in all cases to the extent of the damages occurred as directed by the Engineer-in-charge.

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, pick jumper work, pick jumper blasting work, blasting work in soft and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/ wedging out of rocks (where blasting is prohibited) and pumping or bailing out of watering/dewatering upto any lift stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in layers when required into plinth sides of foundations consolidation each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within any leads including carriage of materials with in all leads, lifts and other incidentals.

Excavation in earth work in all kinds of soils such as pick work, jumper work, pick jumper work, pick jumper blasting work, blasting work in soft and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/ wedging out of rocks (where blasting is prohibited) and pumping or bailing watering /dewatering and disposal of all surplus excavated earth, up to all leads, lifts and through all modes of transportation, disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Excavation in earth work and filling in any layers in foundation and plinths consolidation upto any lead and lift upto any height spade work and pick work including carriage of materials with in all leads, lifts and other incidentals or as per the direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (thirty millimetre into thirty millimetre into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals in:-

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto any thickness.

Beams, cantilevers, girders and lintels, sides and soffits of beams, beam hunching, cantilevers, bressumers and lintels in any depth in all height from floor.

Edges of slabs and breaks in floors and walls in any width.

Providing and laying cement concrete 1 : 6 : 12 (one cement : six sand : twelve graded crushed stone aggregate 40mm (Forty millimetre nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete work 1:2:4 (one Cement : two Sand : four graded crushed stone aggregate 20 mm nominal size) mechanical mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilever upto floor all level including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded crushed stone aggregate 40mm nominal size) mechnically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals.

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position cost of binding wire complete including carriage of materials with in all leads, lifts and other incidentals.

Square rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

Square rubble masonry coursed with hard stones of approved quality in super structure above plinth level to floor all level including raking out joints in cement mortar 1:6 (one cement : six sand) including carriage of materials with in all leads, lifts and other incidentals.

Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth including racking out joists in cement mortar 1: 5 (one cement : five sand) including carriage of materials with in all leads, lifts and other incidentals.

Stone soling / boulder filling dry hand packed in under floor including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood shutters, panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows and including black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm for doors, windows ,clerestory windows including bright finished/black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. grill of required pattern in wooden/steel frames of windows etc. with M.S. flat square or round bars with round headed bolts and nuts or by screws plain grill including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetre) anodized aluminum sliding door bolts anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing anodized aluminum tower bolts (barrel type ) anodized transparent or dyed to required shade and colour with with screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

200x10mm (two hundred millimetre into ten millimetre).

150x10mm. (one hundred fifty millimetre into ten millimetre).

Providing and fixing aluminum handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

125mm (one hundred twenty five millimetre).

100mm (one hundred millimetre).

Providing and fixing 125mm (one hundred twenty five millimetre) M.S. single acting spring hinges bright finished with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 150mm (one hundred fifty millimetre) M.S. oxidized hooks and eyes complete including carriage of materials with in all leads, lifts and other incidentals.

40mm (forty millimetre) thick cement concrete flooring 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) laid in one layer finished with a floating coat neat cement. in all floors including carriage of materials with in all leads, lifts and other incidentals.

White glazed tiles 6mm (Six millimetre)thick in flooring, treads of steps and landing laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement including carriage of materials with in all leads, lifts and other incidentals.

White glazed tiles 6mm (Six millimetre) thick in skirting risers of steps and dado on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall faces PVC (D-plast) for rain water pipes of working pressure not less than 4.5Kg (four point five kilogram)/ square metre including filling the joints with approved adhesive complete 100mm (hundred millimetre) dia pipes including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall facs PVC (D-plast) accessories for rain water pipse including fitting the joints with adhesive complete PVC shoe 100mm (hundred millimetre) dia pipe including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I pipes embedded in and including cement concrete blocks 10x10x10cm (ten centimetre into ten centimetre into ten centimetre) of 1:2:4 mix (one cement : two sand : four stone graded crushed stone aggregate 20mm nominal size) and cost of cutting holes and making good the wall etc. 100 mm (hundred millimetre) diametre for C.I. pipe including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying four courses water proofing treatment with bitumen felt over roof consisting of 1st and 3rd courses of below or/ and residual bitumen applied hot at 1.45Kg. Per square metre of area for each courses second courses of roofing felt type-3 grade-I (Hessian base self finished bitumen felt) and forth with and final courses of stone grit 6mm and down size or pea sized gravel spread at 6 cum.dm or 0.06 cum) per square metre including preparation of surface excluding grading complete including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing pressed steel door frame manufactured from commercial mild steel sheets of 1.25 mm (One point twenty five millimetre) thickness including hinges, jamb, lock jambs, beeds and required angles threshold of mild steel angle of section 50x25 mm (Fifty into twenty five millimetre) or base ties of 1.25mm (One point twenty five millimetre) pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel butt hinges 2.5mm (Two point five millimetre)thick with mortar guards, lock strike, plate and shock observer specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-charge including carriage of materials with in all leads , lifts and other incidentals.

Profile "A"

Profile "C"

Providing and fixing M.S fan clamp type-I 16mm (Sixteen millimetre) dia MS bar bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of loop all as per standard design complete including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in-charge.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool and sand paper complete with readymixed priming paint brushing seal lead red oxide/zinc oxide chrome (Nerolac/ Asian Shalimar) conforming to IS: 3536-1966 including carriage of materials with in all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing finish oil grease to give as even shade including cleaning the surface of oil dirt- dust and other foreign matter (Enamel paint other than white) (Nerolac/ Asian Shalimar) conforming to IS: 3536-1966 including carriage of materials with in all leads, lifts and other incidentals.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint with wood priming pink of approved brand and manufacture (Nerolac/ Asian Shalimar) conforming to IS: 3536-1966 brushing including carriage of materials with in all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping with enamel paint other than white (Nerolac/ Asian /Shalimar) including carriage of materials with in all leads, lifts and other incidentals.

6mm (six millimetre) cement plaster to ceiling in cement mortar 1 : 4 (one cement : four sand) including carriage of materials with in all leads, lifts and other incidentals.

15mm (Fifteen millimetre) cement plaster in single coat on the rough side of brick/concrete /stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand ) including carriage of materials with in all leads, lifts and other incidentals.

15mm (fifteen millimetre) thick cement plaster skirting upto all heights with cement mortar 1:3 (one cement: three Sand) finished with a floating coat of neat cement including rounding of junctions complete up to all floor level including carriage of materials with in all leads, lifts and other incidentals.

10mm (Ten millimetre) cement plaster in single coat on the fair side of brick/concrete /stone walls for interior plastering up to floor all level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:3 (one cement : three sand) including carriage of materials with in all leads, lifts and other incidentals.

Pointing on squared rubble masonry coursed of uncoursed stone masonry with cement mortar 1:3 (one cement : three sand) Ruled pointing upto any floor level including carriage of materials with in all leads, lifts and other incidentals.

Distempering (two coats) with dry distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including primer coat of withing after thoroughly brushing the surface free from mortar dropping and other foreign matter including preparing the surface even and sand papered smooth including carriage of materials with in all leads, lifts and other incidentals.

Distempering (two coats) with dry distemper of approved brand and manufacture and of required shade, on undecorated ceiling and / or slopping roof surfaces to give an even shade after thoroughly brushing the surfaces clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand papered smooth including carriage of materials with in all leads, lifts and other incidentals.

Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated bed dry brick/stone aggregate 40mm nominal size) well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials with in all leads, lifts and other incidentals.

Providing plinth protection 50mm (fifty millimetre) thick in cement concrete 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm nominal size) mechanically mix finishing surface of concrete smooth including carriage of materials with in all leads, lifts and other incidentals.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying of 10cm (ten centimetre) cement concrete 1:5:10 (one cement: five sand : ten graded crushed stone aggregate 40mm (forty millimetre) nominal size and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement and curing complete as per standard design including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors 15mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying in trenches galvanised mild steel tubes (light grade), tube fittings (earth work in trenches to be measured and paid separately) 15mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection and 15mmdia brass ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level 1000 litres net capacity tank including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

110mm (one hunderd ten millimetre) dia.

75mm (seventy five millimetre) dia.

Providing and fixing 75mm (seventy five millimetre) dia PVC door bend with oval access door insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC plain bends ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC single equal branch with oval access door ISI marked insertion rubber washer 3mm (three millimetre) thick, bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mm dia (hundred millimetre) chromium plated grating of superior quality for floor gully or nahni trap including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110X75mm (one hundred ten into seventy five millimetre) including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing vitreous china water closet squatting pan (Indian Type -W.C. Pan) size 580mm (five hundred eighty millimetre) (earth work, bed concrete foot rest and trap to be measured and paid for separately) Orissa pattern including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hunderd ten millimetre) dia PVC P or S trap for water closet ISI marked including jointing the trap with pan and PVC pipe with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PTMT Colored /white high density polyethylene/poly propylene 10 (ten) liters capacity (full flush) European standard control low level flushing cistern with fitting with a pair of brackets with fittings such as lead valve, syphon, 15mm (fifteen millimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (forty millimetre) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous china wash basin with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fitting flat back 550x400mm (five hundred fifty into four hundred millimetre) including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimeter) dia diametre C.P. brass waste for wash basin or sink of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.I. union for wash basin or sink 32mm (thirty two millimetre) dia size including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 32mm (thirty two millimetre) dia P.V.C waste pipe flexible for wash basin or sink including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass mounted on 6mm (six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass 600mmx 20mm (six hundred millimetre into twenty millimetre) including carriage of materials with in all leads , lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass bib tap with capstan head including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass pillar tap with capstan head including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) dia C.P. stop cocks including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC connection pipe with brass unions 300/450mm (three hundred/ four hundred fifty millimetre) length 15mm (fifteen millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals.

Constructing manhole with R.C.C. top slab in 1 : 2: 4 ( one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size foundation concrete 1 : 4 : 8 ( one cement : four sand : eight graded crushed stone aggregate 40mm nominal size inside plastering 15mm (fifteen millimetre) thick with cement mortar 1 :3 (one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2 :4 mix (one cement : two sand : four graded crushed stone aggregate 20mm nominal size finished smooth complete including curing and testing inside size 800x800 and 500mm (eight hundred into eight hundred and five hundred millimetre) deep including C.I. cover with frame (light duty single seal pattern-1) 455x610mm (four hundred fifty five into six hundred ten millimetre) internal diamensions total weight of cover and frame to be not less than 38Kg. (thirty eight kilogram) weight of cover 23Kg. and weight of frame 15Kg. (fifteen kilogram) with 300mm (three hundred millimetre) thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement : three sand) including carriage of materials with in all leads, lifts and other incidentals.

Supplying and fixing cast iron cover with frame 500mm (five hundred millimetre) dia metre (heavy duty) the weight of cover and frame to be not less than 229 Kg. (two hundred twenty nine kilogram) including carriage of materials with in all leads, lifts and other incidentals.

TIRTH SINGH