REPAIR,POLISHING PAINTING OF WOODEN AND STEEL FURNITURE OF VARIOUS MD AND OTM ACCN AT SMA AND SNC(O) MESS AT NAVAL BASE UNDER GE (NW) KOCHI

Amount

Recaning the worn out and unserviceable plastic cane from the furniture items and carry out recanning as per Godrej pattern using white/coloured cane having minimum width of 2.38mm and 0.4mm thick, half round gola type, weighing not less than 6gm per RM, incl making provn of an additional strand i.e 3 strand in place of two for the centre holes when the total span of caning work exceeding 350mm,complete all as specified and as directed by the Engineer in charge for Chair Dining -Drg No : FD-224. General Notes for Item Nos 1 to 5 Caning seat and back of chairs of all types shall carryout with 2 mm wide for general caning work and border/periphery caning work with 3 mm wide plastic cane white/cream color including removing old damaged cane(caning shall be in Godrej patttern) all as shown on respective drawings and specified and directed by the Engineer -in-charge

All as per item No 1 but here-in-before for Chair Easy (Seat and back) Drg No : FD-229/201

All as per item No1 but here-in-before for Chair Verandha (Seat and back) Drg No : FD-19/256/359

All as per item No1 but here-in-before for Stool dressing CB (Seat only) Drg No : FD-27 & FD 280

All as per item No 1 but here-in-before Chair Writing/CBA Office (Seat only) Drg No : FD-250 & FD-280

Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair dining all as specified and as directed by the Engineer-in-Charge.(Drg No. FD-279)

Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-280)

Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair Easy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-229 )

Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood) duly finnished and polished fully including tightening of the frame work for Sofa single seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-258)

Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood)duly finished and polished fully including tightening of the frame work for Sofa two seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-373)

Material and labour for removing the unserviceable/broken rear leg and providing new one with First class hard wood (teak wood)duly finished and polished fully including tightening of the frame work for Sofa three seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-281)

Material and labour for removing the unserviceable/broken front leg and providing new one with First class hard wood (teak wood)duly finished and polished fully including tightening of frame work for Chair dining all as specified and as directed by the Engineer-in-Charge(Drg No.FD-279)

Material and labour for removing the unserviceable/broken front leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge(Drg No.FD-280)

Material and labour for removing the unserviceable/broken front leg and providing new one with First class hard wood (teak wood) duly finished and polished fully including tightening of the frame work for Chair Easy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-229)

Material and labour for removing the unserviceable/broken front leg and providing new one with First class hard wood (teak wood)duly finished and polished fully including tightening of the frame work for Sofa single seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-258)

Material and labour for removing the unserviceable/broken front leg and providing new one with First class hard wood (teak wood)duly finished and polished fully including tightening of the frame work for Sofa two seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-373)

Material and labour for removing the unserviceable/broken front leg and providing new one with First class hard wood (teak wood)duly finished and polished including tightening of the frame work for Sofa three seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-281)

Material and labour for removing the unserviceable/ broken wooden back rest and providing new one with first class hard wood (teak wood) duly finished and polished fully including fixing and tightening the frame work for Chair dining all as specified and as directed by the Engineer-in-Charge(Drg No.FD-279)

Material and labour for removing the unserviceable/ broken wooden back rest and providing new one with first class hard wood (teak wood) duly finished and polished fully including fixing and tightening the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge(Drg No.FD-280)

Material and labour for removing the unserviceable/ broken wooden back rest and providing new one with first class hard wood (teak wood)duly finished and polished fully including fixing and tightening the frame work for Chair Easy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-229)

Material and labour for removing the unserviceable/ broken wooden back rest and providing new one with first class hard wood (teak wood) duly finished and polished fully including fixing and tightening the frame work for Sofa single/two/three seater all as specified and as directed by the Engineer-in-Charge(Drg No.FD-258)

Material and labour for removing the unserviceable broken/ wooden side rails of chairs and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Chair dining all as specified and as directed by the Engineer-in-Charge(Drg No.FD-279)

Material and labour for removing the unserviceable broken/ wooden side rails of chairs and providing new one with first class hard wood (teak wood) (each piece) duly finished and polished fully including fixing and tightening the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge(Drg No.FD-280)

Material and labour for removing the unserviceable broken/ wooden side rails of chairs and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Chair Easy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-229)

Material and labour for removing the unserviceable broken/ wooden side rails of peg table and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Peg Table all as specified and as directed by the Engineer-in-Charge(Drg No.FD-277 & FD-384)

Material and labour for removing the unserviceable broken/ wooden side rails of teapoy and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Teapoy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-278)

Material and labour for removing the unserviceable broken/ wooden side rails of table centre and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Table centre all as specified and as directed by the Engineer-in-Charge(Drg No.FD-274)

Material and labour for removing the unserviceable broken/ wooden side rails of Table with drawer 900x600mm and providing new one with first class hard wood (teak wood) (each piece) duly finished and polished fully including fixing and tightening the frame work for Table with drawer 900x600mm all as specified and as directed by the Engineer-in-Charge(Drg No.FD-283)

Material and labour for removing the unserviceable broken/ wooden side rails of tables and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished including fixing and tightening the frame work for Table without drawer 900x600mm all as specified and as directed by the Engineer-in-Charge(Drg No.FD-284)

Material and labour for removing the unserviceable broken/ wooden stiffeners and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Chair dining all as specified and as directed by the Engineer-in-Charge(Drg NoFD-279)

Material and labour for removing the unserviceable broken/ wooden stiffeners and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge(Drg No.FD-280)

Material and labour for removing the unserviceable broken/ wooden stiffeners and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Table 3'x 2' all as specified and as directed by the Engineer-in-Charge(Drg No.FD-55)

Material and labour for removing the unserviceable broken/ wooden stiffeners and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Table writing all as specified and as directed by the Engineer-in-Charge(Drg No.FD-275)

Material and labour for removing the unserviceable broken/ wooden stiffeners and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Table 900x600mm with out drawer all as specified and as directed by the Engineer-in-Charge(Drg No. FD-284)

Material and labour for removing the unserviceable broken/ wooden stiffeners and providing new one with first class hard wood (teak wood) (each piece)duly finished and polished fully including fixing and tightening the frame work for Table 900x600mm with drawer all as specified and as directed by the Engineer-in-Charge(Drg No. FD-283)

Material and labour for removing the unserviceable / broken/ damaged hand rest of wooden chairs and providing new one with First class hard wood (teak wood) duly finished and polished fully hand rest and fixing and tightening the frame work for Chair writing all as specified and as directed by the Engineer-in-Charge (Drg No.FD-280)

Material and labour for removing the unserviceable / broken/ damaged hand rest of wooden chairs and providing new one with First class hard wood (teak wood) duly finished and polished hand rest and fixing and tightening the frame work for Chair Easy all as specified and as directed by the Engineer-in-Charge(Drg No.FD-229)

Material and labour for removing the unserviceable / broken/ damaged hand rest of wooden chairs and providing new one with First class hard wood (teak wood) duly finished and polished hand rest and fixing and tightening the frame work for Sofa wooden of different types all as specified and as directed by the Engineer-in-Charge(Drg No.FD-258 , FD-281 & FD-373)

Material and labour for removing the unserviceable/ broken/ damaged legs of peg tables and providing new one with first class hard wood (teak wood) duly finished and polished legs and re-fitting/tightning the frame work for Peg Table all as specified and as directed by the Engineer-in-Charge(Drg No.FD-277 & FD-384)

Material and labour for removing the unserviceable/ broken/ damaged legs of teapoy and providing new one with first class hard wood (teak wood) duly finished and polished legs and re-fitting/tightning the frame work for Teapoy all as specified and as directed by the Engineer-in-Charge(Drg No FD-278)

Material and labour for removing the unserviceable/ broken/ damaged legs of table centre and providing new one with first class hard wood (teak wood) duly finished and polished legs and re-fitting/tightning the frame work for Table Centre(Drg No.FD-274)

Material and labour for removing the unserviceable/ broken/ damaged legs of tables and providing new one with first class hard wood (teak wood)duly finished and polished legs and re-fitting/tightning the frame work for Table writing all as specified and as directed by the Engineer-in-Charge(Drg No.FD-275)

Material and labour for removing the unserviceable/ broken/ damaged legs of tables and providing new one with first class hard wood (teak wood) duly finished and polished legs and re-fitting/tightning the frame work for Table dining with L shaped metal clamps and corner support all as specified and as directed by the Engineer-in-Charge(Drg No.FD-273)

Material and labour for removing the unserviceable/ broken/ damaged legs of tables and providing new one with first class hard wood (teak wood) duly finished and polished legs and re-fitting/tightning the frame work for Table with or with out drawer 900x600mm all as specified and as directed by the Engineer-in-Charge(Drg No. FD-284)

Material and labour for removing the unserviceable/broken /damaged legs and supports of hard beds and providing new one and re-assembling and tightning the frame work for Legs ,with L shaped metal clamps and corner support of hard bed made out of Ist class hard wood (teak wood)duly finished and polished fully all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-246)

Material and labour for removing the unserviceable/broken /demaged parts of hard beds and providing new one and re-assembling and tightning the frame work for Long rails and also providing additional support with L shaped metal clamps for hard bed made out of IInd class hard wood duly finished and polished all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-246)

Material and labour for removing the unserviceable/broken /demaged parts of hard beds and providing new one and re-assembling and tightning the frame work for Ply wood top 12 mm thick for hard bed of size 6'x3' commerical grade ISI marked all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-246)

Material and labour for removing the unserviceable/damaged plywood covering of head board of hard beds and providing new one with 4mm thick OST plywood for Hard bed (Head board) and fiited with teak wood beeding all over and all as specified and as directed by the Engineer-in-Charge(Drg No.FD-246)

Material and labour for removing the unserviceable/damaged plywood covering of foot board of hard beds and providing new one with 4mm thick OST plywood for Hard bed (Foot board) and fiited with teak wood beeding all over and all as specified and as directed by the Engineer-in-Charge(Drg No.FD-246)

Removing the unserviceable/damaged top of Table dining 8 persons and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge{Drg No. FD-273 )

Removing the unserviceable/damaged top of Table dining 6 persons and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-239, FD-30 & FD-272}

Removing the unserviceable/damaged top of Table 900mm x 600mm with and without drawer and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-231 & FD-284}

Removing the unserviceable/damaged top of Teapoy and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge{Drg No.FD-278}

Removing the unserviceable/damaged top of Table dressing Gents and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-230}

Removing the unserviceable/damaged top of Peg table and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-277 & FD-384}

Removing the unserviceable/damaged top of Table writing and providing new top with 18mm thick pre-laminated particle board exterior grade OST face with teak wood beading and fixing to the frame work including polishing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-275 &FD-249}

Removing the unserviceable/damaged plywood back cover of mirror from Table dressing gents and providing new 6mm thick commercial ply wood ISI marked and fixing in possition all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-230}

Removing the unserviceable/damaged plywood back cover from table dressing ladies and providing new 6mm thick commercial plywood ISI marked and fixing in possition all as specified and as directed by the Engineer-in-Charge. {Drg No.FD-251 & FD-378}

Removing the unserviceable/damaged mirror of table dressing gents and providing new mirror 5mm thick and fixing in possition including polising all as specified and as directed by the Engineer-in-Charge{Drg No.FD-230}

Removing the unserviceable/damaged Mirror of table dressing ladies and providing new mirror 5mm thick for table dressing ladies and fixing in possition including polshing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-251 & FD-378}

Removing the unserviceable/ damaged ply wood from hat stand with mirror and providing new 4mm commercial ply wood ISI marked for back cover and fixing in position all as specified and as directed by the Engineer-in-Charge{Drg No.FD-233}

Repairing including removing of the unserviceable/ damaged Coat hooks and replacing the same with new Aluminnium anodised in position from each hat stand with mirror all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-233}

Removing the unserviceable/ damaged mirror from hat stand with mirror and supply and fix new mirror 5mm thick including polishing of hat stand with mirror all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-233}

Removing the unserviceable/damaged top of side board and supply new top made out of 19mm thick prelaminated particle board and fixing in position including covering with teak wood lipping/beeding all over all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241}

Removing the unserviceable/damaged single shutter of side board and supply new single shutter made out of 19mm thick prelaminated particle board and fixing in position covering the exposed faces with lipping all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241}

Removing the unserviceable/damaged back side cover of side board and supply new 6mm thick commercial plywood ISI marked and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241}

Removing the unserviceable/damaged drawers of side board and supply new drawers and fixing in position with lipping in open faces and fitted with D shaped SS handle/ ss knob for opening/closing all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241}

Removing the unserviceable/damaged Knob of side board and supply new Aluminium Knob 25mm dia and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241}

Removing the unserviceable/damaged legs of side board and supply new legs of side board made out of first class hard wood(teak wood) duly finished and polished and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241}

Removing the unserviceable/damaged bottom side long rails of side board and supply new bottom side long rails made out of first class hard wood(teak wood) duly finished and polished and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241}

Removing the unserviceable/damaged bottom side short rails of side board and supply new bottom side short rails made out of first class hard wood(teak wood) duly finished and polished and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241}

Removing the unserviceable/damaged middle shelf of side board and supply new middle shelf made out of particle board 19mm thick commercial with lipping on open faces and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-241}

Removing the unserviceable/damaged plywood back cover of table bed side and providing new one with 6mm thick commercial plywood ISI marked and fixing in position all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-248}

Removing the unserviceable front top drawer of table writing and replacing it with new made out of 19mm thick prelaminated particle board exterior grade and covered with teak wood lipping/beeding in open faces and fixing in position fitted with new d shaped SS handle/SS knob all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-275}

Removing the unserviceable damaged shutter of table writing and replacing it with new shutter made out of 19mm thick prelaminated particle board including 75mm MS butt hinges (02 Nos) and fixing in position by covering with teak wood lipping/beeding in open faces and fitted with SS D shaped Handle/SS knob all as specified and as directed by the Engineer-in-Charge.{Drg No.FD-275}

Removing of existing unsv ply wood Top of Bed and S&F New 12mm thick plywood duly treated BWR grade (Commercial type) top to bed plywood top, fixed to existing wooden frame of bed plywood top with M S chromium plated screws counter sunked ply to giving a smooth finish, rubbed /polished, fixed as in repairs completed all as show on drawing specified and directed by Engineer-in-Charge make : Plywood Kitply, Anchor, Century, Sainik,green ply (as approved by GE/Engr-in-Charge) {Drg No FD-21/245/246}

M&L for Anti termite and anti-bug treatment including scrapping ,grinding will be caried out for removal of existing dust,dirt,faded polish, or by rubbing down to smooth with sand paper and after full removal of dust pores/ cracks including applying wax for depressed surfaces as well as washing with caustic soda wherever required before polishing and if any shall be filled with a filler made a paste of wood powder and glue to a creamy consistency adding with raw sienna of quantity required to obtain the desired colour of the base ,on drying wiping to hardened rub surface with sand paper until throughly smooth surface acheived & applying 02 coats of frenhch polish on entire surfaces /wherever glossy finish is required provide it with French polish /melamine polish/Touch wood as reqd /whitening in water or methylated spirit, and apply polish, with a pad of woollen cloth covered by a fine cloth, on the surface in a series of overlapping circles, applying the polish sparingly but uniformly over the entire area to give an even surface having uniform texture and high gloss etcthen applying melamine polishing glossy/mat /wallnut finish with spray machine applying shellac,wood filler,shelear etc after removing exisiting polish making surface smooth by sanding and grinding withstandard work manship as required upto the satisfaction of the Engr-in-charge for Chair dining of all patterns including FD-228/279 as specified and directed .Shade of polish should be directed by GE/Engr-in-charge

All as per Item No.77 herein before but for Chair CB office/Writing FD-280

All as per Item No.77 herein before but for Desk with dias {Drg No.FD-147}

All as per Item No.77 herein before but for Display board various sizes(Large size) {Drg No.FD-103/99/75/17/TP}

All as per Item No.77 herein before but for Form with back {Drg No.FD-78(M)}

All as per Item No.77 herein before but for Mirror with shelf {Drg No.FD-52(m)}

All as per Item No.77 herein before but for Stool dressing all sizes including MAP{Drg No.FD-252/374}

All as per Item No.77 herein before but for Sofa 4 Seater{Drg No.FD-258/373}

All as per Item No.77 herein before but for Sofa 2 Seater{Drg No.FD-258/373}

All as per Item No.77 herein before but for Sofa 5 Seater{Drg No.FD-373/281}

All as per Item No.77 herein before but for Sofa Single seater{Drg No.FD-373/281}

All as per Item No.77 herein before but for Table 2' x 2'{Drg No.FD-95}

All as per Item No.77 herein before but for Table 3'x2'(with/without drawer){Drg No.FD-284}

All as per Item No.77 herein before but for Table writing (FD-275/249)

All as per Item No.77 herein before but for Table cook house large FD-377

All as per Item No.77 herein before but for Table dining 6 pers{Drg No.FD-273/FD/E6/MAP}

All as per Item No.77 herein before but for Table dining 8 pers{Drg No.FD-239/273}

All as per Item No.77 herein before but for Table dining JCO's{Drg No.FD- FD/MAP/II/03}

All as per Item No.77 herein before but for Table dressing gents with mirror{Drg No.FD-230}

All as per Item No.77 herein before but for Table dressing ladies {Drg No.FD-378,FD/E6/MAP/II/

All as per Item No.77 herein before but for Table bedside {Drg No.FD-28/248/276}

All as per Item No.77 herein before but for Side board various sizes

All as per Item No.77 herein before but for Bin soil linen all sizes FD-15,212,244

All as per Item No.77 herein before but for Work bench all sizes Drg No FD-145/TP,various drgs}

All as per Item No.77 herein before but for Table dining 1200x900mm {Drg No.FD- 273}

All as per Item No.77 herein before but for Chair easy with detachable cushion {Drg No.FD-358}

All as per Item No.77 herein before but for Chair easy all patterns including FD-229

All as per Item No.77 herein before but for Teapoy all patterns including (FD-278/232/278)

All as per Item No.77 herein before but for Table 3'x3'(FD-291/52)

All as per Item No.77 herein before but for Hat stand with mirror all sizes including FD 233,361FD-291/52)

All as per Item No.77 herein before but for Mirror with shelf and frame all sizes including FD /52)

All as per Item No.77 herein before but for Locker bedside wooden all types including FD-222/229/54(M)/DB-074

All as per Item No.77 herein before but for Book Case {Drg No.FD-237}

All as per Item No.77 herein before but for Peg Table {Drg No.FD-384}

All as per Item No.77 herein before but for Bed hard {Drg No. FD-246/FD21(M)}

All as per Item No.77 herein before but for Table Centre (FD-274)

All as per Item No.77 herein before but for Chair Dining MAP {Drg No.FD/E6/MAP/10}

All as per Item No.77 herein before but for Chair Dining OFFRS all patterns including {Drg No.FD/E6/MAP/II/04}

All as per Item No.77 herein before but for Table Dining MAP {Drg No.FD/E6/MAP/II/03}

Dismantling/removing the U/S or serviceable ply top from GI pipe charpoy and dismantle the frame completely, replace the broken/unserviceable parts with new ones, reassembling the charpoy frame completely in all respects by inserting/screwing in the existing/replaced long/short rails and legs inside the 3 way elbow 32 mm duly tightened with check nuts and re fixing the serviceable ply wood removed from the existing charoy and keep the frame ready completely all as directed by Engineer-in-Charge. Notes :.(i) Quoted rate is inclusive of labour element for providing new parts.

Supply only new long rail, 1880mm long, 32mm dia, medium grade GI, Class 'B' conforming to IS-1239 (pt1) of 1979 having threaded portions 22mm long, on each end.All As directerd y Engineer - in -Charge

Fabrication/making of short rail, 800mm long, threaded 22mm for both ends made out of long rail obtained from item No116 above all as directed by the Engineer-in-Charge.

Fabrication/making of leg, 375mm long, duly threaded on top end up to 22mm made out of short/long rail obtained from item No.116 above including provn of FI clamps for fixing hard wooden block plugs at bottom as required all as directed by the Engineer-in-Charge.

Removal of one serviceable leg from GI pipe charpoy with ply top without disturbing the charpoy frame and removing the existing wooden block along with screw levelling/plaining by cutting/scraping the bottom of leg to make charpoy symmetrically horizontal and refix the removed wooden block after providing 34mm dia and 3mm thick mild steel sheet by spot welding at three places to form leg base and refix the leg to charpoy properly all as directed by the Engineer-in-Charge.

Supply & fixing 32mm dia 3 way elbow class B as per IS 1239 (Pt II) 1982

Supply & fix in repair plywood 12 mm thick commercial BWR grade/marine ply as per the size of Charpoy GI/Charpy with ply top as directed by Engineer-in charge

Supply and fixing in repair check nut 32 mm dia hexagonal shaped class B quality as per IS 1239 (Pt II) 1982 all as directed by the Engineer-in-Charge

Supply and fix CP steel handle 125mm long made to shape and fixing the same to make the 3 way locking system fully operational including removing the unserviceable handle for almirah steel of any size and type.

Supply and fix three way locking device including plane rod MS rod to match with original to making the system fully operational for Almirah large steel.(Drg No.FD-109/114 (m)/351/67 (m)/1031/1033/TP) including removing the unserviceable locking system

Supply and fix three way locking device including plane rod MS rod to match with original to making the system fully operational for Almirah small/medium steel. (Drg No.FD-67(m)/114 (m) / 350 / 1032/1034 ) including removing the unserviceable locking system.

M&L for straightening and denting to shutters/body of almirah steel of different size including replacing worn out/broken hinges with suitable hinges, greasing etc complete all as shown on Drg specified and directed by Engineer-in- Charge {Drg No FD-243,67(m),1031/1032/1033/1034/TP}

Supply and fix new key hole and ss cover with lock of 50mm six lever, duly fixed inside face of front shutter with stainless steel keys in duplicate for almirah steel of any size and type all as directed by the Engineer-in-Charge.(Drg No.FD-109/114 (m)/ 115(m) /350/351 /67(m)/1031/ 1032/1033/ 1034/TP)

Supply and fix by welding or jointing to the bottom of steel almirah channel base/leg of length 440mm/484mm as per drg, each consisting of 1mm thick two MS sheet channel base 70mm wide 100mm high with the open end bent out wards up to 15mm, the ends of the channel shall be covered with 70 mm x 100mm MS sheet of 1mm thick incluidng two coats of synthetic enamel paint olive green/smoke grey colour over a coat of zinc chrome primer for Almirah small/medium steel including removing the unserviceable channel base/leg all as directed by the Engineer-in-Charge.(Drg No.FD-67(m)/114 (m)/350/1032 1034 )

Supply and fix by welding or jointing to the bottom of steel almirah channel base/leg of length 440mm/484mm as per drg, each consisting of 1mm thick two MS sheet channel base 70mm wide 100mm high with the open end bent out wards up to 15mm, the ends of the channel shall be covered with 70 mm x 100mm MS sheet of 1mm thick incluidng two coats of synthetic enamel paint olive green/smoke grey colour over a coat of zinc chrome primer for Almirah large steel including removing the unserviceable channel base/leg all as directed by the Engineer-in-Charge.(Drg No.FD-109/114 (m)/ 115(m)/351 /67(m)/1031/ /1033/ TP )

Supply and fix by welding or jointing to the bottom of steel almirah channel base/leg of length 440mm/484mm as per drg, each consisting of 1mm thick two MS sheet channel base 70mm wide 100mm high with the open end bent out wards up to 15mm, the ends of the channel shall be covered with 70 mm x 100mm MS sheet of 1mm thick incluidng two coats of synthetic enamel paint olive green colour/smoke grey over a coat of zinc chrome primer for Locker steel including removing the unserviceable channel base/leg all as directed by the Engineer-in-Charge.(Drg No.FD 257 / 1029 )

Supply and fix 1mm thick mild steel single shelf fixed to three sides (inside) the steel almirah as shown in drawing bent to 25mm on sides, back and in front and further bent upwords to 10mm in front and sides of shelves, duly painted with two coat of synthetic enamel paint olive green/smoke grey colour over a coat of zinc chrome primer for Almirah small/medium steel (Drg No.FD-67(m)/114 (m)/350/1032 1034)

Supply and fix 1mm thick mild steel single shelf fixed to three sides (inside) the steel almirah as shown in drawing bent to 25mm on sides, back and in front and further bent upwords to 10mm in front and sides of shelves, duly painted with two coat of synthetic enamel paint olive green/smoke grey colour over a coat of zinc chrome primer for Almirah Large steel (Drg No.FD-109/114(m)/115(m) /351/67(m) /1031/1033/TP)

Supply and fix 20mm dia CP steel conduit pipe, with 1.6 mm wall thickness, with sockets at both ends 380mm long for Locker steel fixed in repairs all as specified and as directed by the Engineer-in-Charge.(Drg No.FD-257/1029/1034)

Supply and fix safty type, CP hasp and staple 75mmx40mm x3mm fixed on the shutter of locker steel in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-257/1029)

Supply and fix 50mm long tower bolt, chromium plaled steel, single lower or upper, duly welded to the shutter fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-257)

Supply and fix single 125mm CP steel bow handle on the left or right shutter fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD-257/1029)

Supply and fix new lock, 4 lever aluminum body, locking bolt lever of cast brass with stainless steel keys in duplicate, suitable for table office clerk/general/typist fixed to the shutter or top drawer and providing automatic locking system to the other three drawers complete fixed in repairs all as directed by the Engineer-in-Charge.(Drg No.FD 84 (m)/1002 /1003/1004/1005/1008)

Material and labour for preparation of old painted surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat,apply proper putty to cover the area and clean throughly to remove all dust/oily spot,extra putty to give a smooth surface finish etc and applying two coats of synthetic enamel paint carried out by roller/spray painting/with brush as per the requirement and direction with color approved by GE/Engr-in-Charge to all in side and out side surfaces of the item painted all as directed by the Engineer-in-Charge for Almirah Large steel

All as per Sl No 139 here-in-before but for Almirah Medium steel

All as per Sl No 139 here-in-before but for Locker bedside steel

All as per Sl No 139 here-in-before but for Book case Steel of various FD and TP patterns and sizes

All as per Sl No 139 here-in-before but for Rack Steel of various FD and TP patterns and sizes

Removing the existing plywood from Charpoy MS square and preperation of old painted steel surfaces and applying one coat of synthetic enamel paint colour as approved by Garrison Engineer on all external and internal surfaces and refix the plywood of Charpoy IP Hard Top as specified and as directed by the Engineer-in-Charge

Removing the existing plywood from Charpoy MS square and preperation of old painted steel surfaces and applying one coat of synthetic enamel paint colour as approved by Garrison Engineer on all external and internal surfaces and refix the plywood of Hard Bed MAP as specified and as directed by the Engineer-in-Charge

Supply and fix new plywood BWR Grade ISI Marked/ Marine plywood of size 1980 mm x900 mm and tightening with with headless MS nut & bolt 6 mm dia of 75 mm length with washer and to give a smooth surface finish in Bed Hard Map and as directed by Engineer -in-charge

Supply and fix new plywood BWR Grade ISI Marked/ Marine plywood of size 1980 mm x900 mm and tightening with with headless MS nut & bolt 6 mm dia of 75 mm length with washer and to give a smooth surface finish in Charpoy IP Hardtop and as directed by Engineer -in-charge

M&L for removing U/S side/back of bottom drawers from Table Bedside Map and supply and fix new Side/Back drawers to Table Bedside MAP made out of 18/19 mm thick prelaminated particle board complete all as specified and directed (Drg No FD/E6/MAP/15( R)

Removing U/S top from Table bedside MAP and supply and fix new top to table bedside MAP made out of 18/19 mm thick prelaminated particle board complete all as specified and directed Drg no FD/E6/MAP/15( R)

Removing U/S plywood from bottom drawer from Table bedside MAP and supply and fix new drawer to table bedside MAP made out of 18/19 mm thick prelaminated particle board complete all as specified and directed Drg no FD/E6/MAP/15( R)

Removing U/S plywood from side and bottom of front drawer from Table bedside MAP and supply and fix new drawer to table bedside MAP made out of 6 mm plywood complete all as specified and directed Drg no FD/E6/MAP/15( R)

Supply and fix new telescopic channel in both sides to give easy movement for both top and bottom drawers and also fitted with Fancy knob of good quality for easy handling which is duly approved by GE/Engr-in-Charge and also fix the metallic frame which is duly painted with black synthetic enamel paint and fix with new screws whwerever necessary For each table bed side map .

N N J ENTERPRISES (BID ID -3438956)

REENA INDUSTRIES (BID ID -3441241)

R.K. Builders (BID ID -3447772)

Mahesh Traders (BID ID -3440219)

PRIYADARSHINI CONSTRUCTIONS (BID ID -3440761)