Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹65.8 LAccepted-AOC GE WEST BAREILLY | L1 | Accepted-AOC Being Lowest Bidder | |
| 2 | L2₹71.1 L+₹2.4 L (3.56%)Rejected-Finance | L2 | Rejected-Finance Being Higher Bid | |
| 3 | L3₹74.1 L+₹5.4 L (7.87%)Rejected-Finance 578 AVAS VIKAS JANAKPURI B IZATNAGAR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | L3 | Rejected-Finance Being Higher Bid | |
| 4 | L4₹74.9 L+₹6.2 L (9.05%)Rejected-Finance 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L4 | Rejected-Finance Being Higher Bid | |
| 5 | L5₹77.2 L+₹8.5 L (12.3%)Rejected-Finance 160 PREM NAGAR BAREILLY | L5 | Rejected-Finance Being Higher Bid |
Tender Value
₹89.3 L
EMD Value
₹1.6 L
Closing Date
16 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bareilly
HQ, CWE, MES, Station Road, Bareilly
CA NO.CWE BLY/GE (W) / 33 OF 2023- 2024 SPECIAL REPAIR OF BLDG NO. T-14 PB MARG AND BLDG NO T-168 AND T-169 CROSS ROAD OF JLA UNDER GE WEST BAREILLY
2023_MES_613311_1
8100/B/771/E8
Open Tender
Civil Works
Item Rate
270 days
Bareilly
As per NIT
6 documents required · 6 mandatory
₹1,000
GE ( W ) Bareilly
₹1.6 L
Yes
1 Nov 2023
11 Aug 2023
18 Sept 2023
11 Aug 2023
16 Sept 2023
2 Sept 2023
Amount
Dismantling frame truss span n.exc 10 M any type complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over in section, in any position , framed work complete all as specified and directed.
M & L for Steel work in tubular hollow rectangular trusses, purlins, rail including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade inluding one coat of zinc chromate primer before fabrication distance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed.
S&F for pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling roof sheet (corrugated, semi corrugated etc) coverings complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L in repairs 12 mm thick GRG false ceiling for all heights with GRG false ceiling of size 595mmx595mm of approved texture, texture design and pattern having moisture content less than 2% humidity resistance of 99%, NRC 0.85 as per IS 8225: 1987.to be laid in true horizontal level suspened on interlocking with metal T-grid of hot dipped galvanised iron section of 0.33mm thick comprising of main-T runners insulation and grid module ogf galvanised section of size 600mmX600mm suspended from the ceiling with necessary fittings with all hanging /sopporting arragements as in false ceilling incl taking down old ceiling with frame and making good disturbed surface complete all as specified and directed .
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces or on other than fair faces of brick masonary fair finished without using extra cement with using water proofing (liquid) as per manufacturer's instruction complete all as specified and directed
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile laying over and including 15 mm thick cement mortar 1:6 for floor rough finishes complete all as specified and directed.
All as per serial item No.11 but as on verical surface, 10 mm thick plaster in cement mortar 1:4
M & L for Glazed ceramic tiles in vertical surface 600X 300X 7/8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tile over and including 10 mm thick rendering CM 1:4 complete all as specified and directed.
M&L for double charged vitrified tiles light shade 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.42 sqm but n exc 1 mtr in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over including screeding 15mm thick in CM 1:6, complete all as specified and directed.
M&L for vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.42 sqm but n exc 1 mtr in skirting/verticle surface etc, set and jointed in neat cement slurry and pointed in white or coloured cementover and including screeding 10mm thick in CM 1:6, complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.
Demolition of Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
M&L brick work with fly ash bricks (old size) as per IS 12894 -2002 straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
Demolition of Reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for cement concrete type D2,1:4:8 (using 40 mm graded stone aggregate) as in mass concrete complete all as specified and directed
Taking down chowkats or frames not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed.
S&F powder coated aluminium frame for windows, ventilators and kitchen cupboards frame size 100x44mm and 2mm thick with one or more rebates including joining cleat for fixing etc and add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed. Note : 1. Weight of section of window & ventilator shall not be less than 1.12kg per RM. 2. Cost of rubber beading and required accessories shall be included in the rate of item and shall not be paid extra.
S&F for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) each shutter complete all as specified and directed. Note : Cost of rubber beading and required accessories shall be included in the rate of item and shalll not be paid extra.
S&F for mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed.
S & F Pressed steel frames size 105 x 60 mm (Thinkness of PBI Sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.
Pressed steel frames size 125 x 60 mm (Thinkness of PBI Sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
S&F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .
S&F 35mm thick glazed and skeleton shutters, open rebated of saal wood second class hard wood rail and stles and prepared to receive glass, gauze, etc. (without sash bars), divided into squared, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed. (Note :-Glass/gauge shall be measured and paid for separately)
S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F Solid Prelam WPC solid Door Frame of size 105mm x 65 mm, density more than 0.95, moulded preleminated fixing at opening with screw of size 100 mm long 5 mm dia pling & fixing in opening as per specification and directed Note : Colour to be deceided by GE.
S&F 30 mm thick solid core one WPC Modular door, one side Prelam and other side plain fixed in the frame at site as per specification & drawing complete all as specified and directed.
Taking up or down 15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with and including all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with and including all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
S&F for 30 mm thick solid PVC board, both side prelaminated, one side with decorative choice lamination, and other side plain rigid white lamination as in cup board shutters, with wardrobe/ finch lock & PVC lipping on all exposed edges of same texture and shade, with complete all as specified and directed. ' Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) thickness of laminated not less than 0.25mm for inside rigid white type & 0.12 (14 micron) mm for outer decorative type. The laminate shall be fixed to base with approved adhesive as per manufacturer's instructions and machine pressed to ensure proper bonding with base ply and avoid air pockets. 3) Frame to be fixed to walls, soffits & base of cupboard with fasterners.
S&F in repairs factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete aa as specified and directed, manufacturer's specification and drawing.
S&F PVC boards 19/20 mm thick any colour/ prelaminated as in cabinets incl shelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions including piano hinges, magnet catcher, handles etc complete all as specified and directed.
S&F 200 mm long Stainless Steel glossy finish handles with SS screw, complete all as specified and as directed.
S&F hydraulic concealed hinge with clip on installation and integrated Silent System, opening angle not less than 100º, For shutter thickness 15 - 24 mm full overlay type shutters, hinge cup dia 35 mm including necessary fixing arrangement with SS screw complete all as specified & directed. Make: Hettich cat No Onsys 4447i product code 928143200 /Kaff nickel plated SC hinge 100°code No KHSC-0/Godrej product code :6933, Baan code LKYAHCHR4 Make: Hettich cat No Onsys 4447i product code 928143200 /Kaff nickel plated SC hinge 100°code No KHSC-0/Godrej product code :6933, Baan code LKYAHCHR4
Dismantling water tanks 500 & n.exc. 1000 and removing to store complete all as specified and directed.
S&F 1000 litres, rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top and fixed in position complete all as specified and directed
M&L for Granite (of any type) tiles of 20mm(+ 2 mm) thick machine cut and machine, polished,and moulding, window cills, riser of steps and urinal partition wash basin platforms and flooring,skirting/dados, kitchen like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed complete all as specified and directed.
S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) completed all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent , complete all as specified (reinforcement to be measured & paid under respective items) complete all as specified and directed.
S&F Form work to sides and soffits of floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves,Chajjas including support over lungs etc also splays between floor and beams etc. completed all as specified and directed.
M&L for reinforced cement concrete of rough finished surface 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in Lintel/Roof beam and chajja including bonding agent , complete all as specified (reinforcement to be measured & paid under respective items) complete all as specified and directed.
M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in concrete wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed.
S&F TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed.
S&F Mild steel TMT bars 5mm dia and over upto and including 10 mm dia in stirrups,spaces and binders and complete all as specified and directed.
S & F 140 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring complete all as specified and directed.
M&L for stainless steel (AISI 304 Grade ) Non magnetic multilayer nikle chrome plated for multipurpose utensil container including frame work telecscopic channels, handles etc as reqd and complete all as specified and as dircted utensil sample, design and pattern of each basket to be approved by GE the foloowing size in each kitchen. (a) plain basket 510x470x100mm or 520x485x100mm or 530x505x150mm slace godrej code 6126 Baan code LKY2PB 2014 -Evershine size 520x485x90mm of 03 nos (b) multisize plate basket of size 510x470x150mm or 520x485x150mm or 436x500x200mm (Clear depth 500mm) 02 nos make Silk Elnora BAAN code LKY-3CS214- Ever shine size 520x485x90mm approved by GE (c) Cutlery Basket, with Perforated bottom and side of compacted -slots for holding cutlery of size 510x470x100mm or 520x485x100mm or 144x468x50 (Clear dpth of 500mm) 02 nos make Silk Elenora (Asian Paint) code 600, size 530x505x100mm (Godrej Product code 6134 BAAN Code LKY2PC214/Ever shine size 520x485x95mm (d) Plain basket of size 510x470x200mm or 520x485x200mm or 486x500x200mm 02 Nos make Silk Elenora (Asian Paint) code 600, size 53x505x200mm- Godrej product code 6128 BAAN code LKY 2PB218- Evershine size 520x485x180mm (e) pull out with 2 basket each of size 150x485x80mm or 100x485x80mm 01 Nos make Sleek Elenora (Asian Paint ) code 250 size 180x500x590mm / Godrej product code 6141 baan code LKYNS2SP6/Ever shine size 610x485x90mm (f) dust bin as reqd 01 Nos
S & F 150 mm thick Brass, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.
S&F 100 mm size butt hinges medium weight stailess steel complete all as specified and directed.
S&F 300 mm size ordinary mild steel, rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as specified and directed.
S&F 300 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs Vitreous China table/counter top wash basin of suitable size including SS bottle trap, and cabinet of PVC shutter fixing on counter with SS waste coupling, cp mixer for hot & cold waste pipe complete all as specified and as directed.
S & F in repair fancy type 150mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed.
S&F in repair 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified and directed.
S&F in repairs Bib tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed (min weight 90 gms) complete all as specified and directed.
S&F in repairs angle valve (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed (min weight 90 gms) complete all as specified and directed.
S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed.
S&F fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed.
S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed.
S&F in repair 15 mm dia fancy type stop cock/concealed cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as specified.
S & F Brass CP Hand Shower with 15mm dia 1.2 Meter long flexible tube and wall hook screwecd for iron pipe fancy type long body complete all as specified and directed.
S&F stainless steel of AE- SI 316 grade tubular towel ring including a pair of CP brass bracket complete all as specified and directed.
S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 600mm complete all as specified and directed.
S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified and directed.
S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed.
S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed.
S&F in repairs Vitreous china wash down water closet single piece (Cascade pattern) with seamless flushing cistern square design duroplast slim seat cover, slow falling seat cover size 69x37x77CM / 66x35x71 complete, including connection to drain pipe etc complete all as specified and directed.
S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed
S & F Brass CP hand shower (health faucet) with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body complete all as specified and directed.
S & F in repair water jet of EWC chromium plated with PVC connection complete all as specified and directed.
S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1(using 20 mm graded stone aggregate) complete all as specified and directed.
S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.
S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.
S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified and directed.
S & F in repair 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc. complete all as specified and directed.
S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type curtain droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed
M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for preparation of new untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by GE.
M&L for preparing newly plastered walls surfaces and applying two coats of exterior emulsion paints with electric sprayer over and including 2 mm thick wall care putty complete all as specified and directed.
M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of exterior emulsion paints with electric sprayer over and including 2 mm thick wall care putty complete all as specified and directed.
M&L for preparing newly plastered walls surfaces and applying two coats of interior emulsion paint with electric sprayer over and including 2mm thick wall care putty complete all as specified and directed.
M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying emulsion paint with electric sprayer over and including 2mm thick cement based in double layer wall care putty complete all as specified and directed.
Taking down rolling shutter of any type and discription complete all as specified and directed.
S & F of Steel rolling shutters (thickness of lath 1.25 mm), with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.
M & L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
M&L for rubber moulded cement concrete factory made coloured glazed interlocking paver block ISI mark any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade, machine pressed of pattern and colour as approved by GE over and including 50 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings all completed as specified and directed.
M&L for PCC 1:2:,) type B1 (using 20mm graded stone aggregate) for machine pressesd precast cement concrete kerb stone (300x150x300) including weathering, slightly rounded or chemferred angles and throating , as directed edges complete including excavavtion for kerb stone and filling after embeded including watering and well ramming complete all as specified and directed..( Note size of kerb stone shall be approved by GE).
M & L Providing cement concrete type B0 1:2:4( using 12.5mm stone aggregate) as in kerbs or mud stops rounded edges completed all as specified and directed
M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for providing precast cement concrete rubber moulded chequered coloured tiles 20 to 25 mm thick even finished on top of approved design and pattern laying over and including 15 mm screed bed of CM (1:4) complete all as specified and directed
M & L Plain Cement concrete 1:4:8, Type D2( using 40 mmstone aggregate) as in floor/sub base 75 mm thick and finishing the surface even and smooth without using extra cement complete all as specified and directed
Taking down shutter including frame of cupboard of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.
M & L for 25 mm sand cushion over PCC before laying interlocking tiles as specified and directed
S & F Solid Prelam PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing
S&F 30 mm thick factory made one side Prelaminated PVC sheet other side decorative (door shutter) used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wie gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit ' (II) rate for filling PCC, 1:2:4 tpe B0 as in frame deemed to be included in quoted rates ' (iii) MS grill shall be measured and paid seperatly under relevant item of schedule
S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, 32 mm diaCP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.
S&F factory made plain framed, panelled shutter 35mm thick 2nd class Hardwood (any number of panels) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and all as specified and directed.
S&F Vitreous china wash down closet(Pedestal pattern) white complete in all respect with and including connection to drain pipe antisyphonage pipe etc. complete all as specified and directed.
S&F Plastic water closet seat cover (best quality) closed pattern with flat bottom with mild steel chromium plated hinging divice complete all as specified and directed.
Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed
Taking down carefully UNSV main switch DBs of any description of an size in any position complete all as specified.
Taking down submain wiring including all accessories complete all as specified and directed.
Material and labour for point wiring with single core FRLSH 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified and directed:- (a) One light / fan/ exhaust fan point controlled by one switch.
(b) One 5 pin 5 Amp switch socket out let point on an independent board complete all as specified and directed.
(c) One 5 pin 5 Amp socket out let point controlled by one switch on same board complete all as specified and directed.
(d) One buzzer/ bell point controlled by one push button on the same board with other switches or independent complete all as specified and directed.
All as per item 121 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLSH (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductor complete all as specified and directed.
S & F Modular switch one way 10 A, 1 Module complete all as specified and directed.
S & F Modular switch one way 16 A, 1 Module complete all as specified and directed.
S & F Modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed.
S & F Modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed.
S & F Modular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed.
S&F Modular Bell push 6A 1 module complete all as specified and directed.
S&F bell ding dong musical ,AC, 230 Volt, single pole complete all as specified and directed.
Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.
S&Fsocket out let 6 Pin 2 in 1, 5/15 Amp flush type 240 Volt complete all as specified and directed.
S&F bell push flush type 5 Amp complete all as specified and directed.
S&F in replacement of fan regulator 150 watts electronic flush socket type with five stepped range hum free complete all as specified and directed.
M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body modular type with back plate batten/angle type for batten fittings complete all as specified and & directed
S&F flush sheet metal enclosure TPN DB 4 way 415 V with double door IP-42 protection detachable gland plate, flush mounting for MCB fitted with bus bar, earth bar and neutral links including taking down complete all as specified and directed.
Supply and fixing surface mounting LED light fitting aluminium extruded T-5 batten , 10 Watt, 2 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed.
Supply and fixing in replacement surface mounting LED light fitting aluminium extruded T-5 batten , 20 Watt, 4 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed.
S&F in replacement indoor decorative LED City-3 light fitting suitable for 12 Watt retrofit LED Lamp B22 base with polycarbonate body with upper globe complete including single 12 Watt LED lamp complete all as specified and directed.
S&F in replacement LED lamp 12 Watt, 230 V , AC integrated circuit rechargable type complete all as specified and directed.
S&F in replacement security light fitting, LED type, 20 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.
M&L in replacement r sub main wiring with two single core 6.0 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 6.0 sqmm (FRLS) and one run of 6.0 sqmm (FRLS) copper conductor shall be measured as one unit length.)
M&L in replacement sub main wiring with two single core 4.0 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 4.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. ( Note :- Two runs of 4.0 sqmm (FRLS) and one run of 4.0 sqmm (FRLS) copper conductor shall be measured as one unit length.)
Taking down ceiling fan in any description 1200mm/1400mm and keeping insafe castody and refixing the same position including cleaning painting with white synthetic enamel paint after repair work and connected with existing connection complete all as specified and directed.
Taking down Exhaust fan in any description and keeping insafe castody and refixing the same after cleaning and painting with existing colour with synthetic enalel paint repair work and connected with existing connection complete all as specified and directed.
Taking down Geysers in any description and keeping insafe castody and refixing the same after repair work including all fixing arrangement as reqd at site and connected with existing connection complete all as specified and directed.
S&F in replacement MCB SPN 63 Amp 240 volt complete all as specified and directed.
S&F in replacement MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed.
S&F flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv complete all as specified and directed.
S&F in replacement sheet metal enclouser DB 415 V vertical with provn for mounting MCCB 125 Amps IP 54 double door flush sheet metal enclosure DB 4 way 415 V with double door protection detachable gland plates, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete including taking down old unsv complete all as specified and directed.
M&L in replacement MCCB 100 Amps, four pole 16 kA 415 V 'C' curve complete with connection with appropriate size of lugs complete all as specified and directed.
M&L in replacement AC box Modular type with MCB 20 Amps complete all as specified and directed.
Taking down existing iron/ wooden box of any sizeand type complete all as specified and directed.
Supply and fix Meter box flush on wall of suitable size as existing space made out of CRCA sheet of 2 mm thick indoor type totallty enclosed weather ,dust and vermin proof with front opening hinged door and locking arrangement with angle iron frame alround panel body duly grouted on wall, having inner shell for fixation of SPN DB 8 way and space for fixing single phase KWH meter of suitable capacity 01 Nos, Copper lugs, spacers, Mounting Channel, rubber gasket, locking knobs, Hylam sheets pieces, PVC shrinkable connections, suitable compartments and epoxy powder spray painted with one coat primer complete including taking down existing Note : All connection with wiring with 6 sq mm PVC insulated single core multistranded copper conductor drawing through PVC flexible conduit and connected with appropriate size copper thimbles complete all as specified and directed.
Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate complete as per plate No.3 of SSR Part-I and directed.
Taking down carefully unserviceable service connection of any description complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dence soil for laying of LT UG cables/base for Pole etc complete all as specified and directed.
Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and directed.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L for sand cushioning laid in trenches for laying of LT UG cables complete all as specified and directed.
M&L brick work with fly ash bricks (old size) as per IS 12894 -2002 for protection of LT UG cables complete all as specified and directed.
Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 4 core complete all as specified and directed.
S&F GI tubes light grade of dia 40 mm with all fitting and fixed complete for protection of LT UG cables laid to walls or in floors or along with poles etc complete all as specified and directed.
Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core. ( for lawn light ) complete all as specified and directed.
Taking down Electric meter carefully and refixing the same after bld repair, inclding the same fixed on new laminated sheet etc as reqd at site complete all as specified and directed.
S&F MCB SPN 40 Amp 240 volt complete all as specified and directed.
S&F MCB Triple pole and neutral 40 Amp 415 Volt 'B' curve 10 KA complete all as specified and directed.
S&F switch piano flush type 5 Amp single pole one way complete all as specified and directed.
S&F socket out let 2 in 1 flush type 5 Amp 5 Pin complete all as specified and directed.
S&F switch piano type 15 Amp flush type 240 Volt complete all as specified and directed. Note for Srl item No.95 to 98 :- Applied using airless spray techonology and capable of operating single spray gun machine with a suitable hose length. The spray machine should be reputed manufacturer with pro-guard with well pressure. Note : Tenderers may note that amount of credit Rs 2,93,089.60 will be deducted from the total amount arrived, at the time of Acceptance of contract.
SHIV SAI ENTERPRISES
UTTRAKHAND BUILDERS
M/s KUMAR CONSTRUCTION CO.
Builders Harpal
M/S Rajeev Sharma and Co.
Harsha Consultant and Builders
REHAN CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .