Supply Installation testing and commissioning of fire fighting and fire alarm system for Godown and agri complex at State warehouse Kozhinjampara in Palakkad District under NABARD-WIF Scheme

Amount

Supply, installation, testing and commissioning of Manual Swing Type Fire Hose Reel drum complete with heavy duty reel & drum , 19mm. dia. x 30Mtr. long 2-ply polyester yarn braided /rubber braided pressure hose, Red Coloured, heavy duty nylon on/off jet/spray nozzle, 25mm. isolating valve and all other necessary fixing accessories.including fabrication and erection of MS supports, as per requirements for fixing the fire hose reel set.

Supply, installation, testing and commissioning of SS Fire Hydrant Valve, bearing to IS:5290 type - A mark , stainless steel -304 body with 63mm. oblique instantaneous single outlet, 80mm flanged inlet, stainless steel 304 spindle, complete with PVC blank cap and chain etc.

Supply, installation, testing and commissioning of Fire Brigade Inlet breeching, CI body, having 4 nose of Gunmetal 63mm dia male instantaneous inlet, conforming to IS: 903, with non return valves, 25mm. drain valve, flanged outlet, 3 nos. of rubber blankcaps and chains.

Supply, installation, testing and commissioning of RRL Hose, 63 mm dia 15 Mtr long non percolating flexible and light weight synthetic fibre with textile reinforcement with Working Pressure 14 Kg/Cm2, Proof Pressure 22 Kg/Cm2 and Burst Pressure 38 Kg/Cm2. including gunmetal make male and female instantaneous couplings approved by fire authority, machine would with copper wire complete in all respects.

Supply, installation, testing and commissioning of Branch Pipe SS short type, with 63mm. male instantaneous inlet, male threaded outlet, fitted with 16mm. bore nozzle, having IS: 903 mark.

Supply, installation, testing and commissioning of Weather Proof Fire Hose Cabinet, with single door and required supporting system/arrangement for keeping 1 Sets 15 Mtr. fire Hoses with Couplings and one Branch pipe, to the approval of Consultant.

Supply, installation, testing and commissioning of Air Release Valve Gunmetal, conforming to IS 903:1993, having rubber ball with sealing seat and with 25mm. BSP threaded male inlet, including necessary accessories and connections.

Supply, installation, testing and commissioning of Tank filling inlet connection with 2nos Gunmetal 63 mm dia built -in gunmetal Non-Return valves instantaneous coupling type arranged on 100 dia etc .pipe manifold shall be connected to UG sump

Supply, installation, testing and commissioning of Draw-Out connection with 2nos Gunmetal 63 mm dia built -in gunmetal Non-Return valves instantaneous coupling type arranged on 100 dia etc . pipe manifold shall be connected to UG sump

Supply, installation, testing and commissioning of 100 mm Dia ball type foot valve with CI body ,strainer confirming to is specifications compleate with gasket seal and accessories. Compleate in all respect as required as per the technical specification

Supply, installation, testing and commissioning of 25mm. Ball Valve, PN-20 gunmetal conforming to IS: 13095, including necessary accessories and connections.

Supply, installation, testing and commissioning of 4" dia. Glycerin type Pressure Gauge with 0 to 200 PSI and ISI Mark.

Supply, installation, testing and commissioning of CI Butterfly Valve, PN-16, slim seal, standard lever operated type confirming to BS:5155 with IS: 13095 Mark and with companion flanges, nuts, bolts etc.complete.for 150mm. Dia ( main tank-2,discharge-2,Suction -2 test line -1, delivery -1, extra-1)

Supply, installation, testing and commissioning of CI Butterfly Valve, PN-16, slim seal, standard lever operated type confirming to BS:5155 with IS: 13095 Mark and with companion flanges, nuts, bolts etc.complete for 100mm. Dia (jocky suciton -1,Discharge -1 ,terrace tank -2, extra-1)

Supply, installation, pressure testing and commissioning of Above Ground Fire Hydrant medium Pipe Work with (Class-B) M.S Pipes, confirming to IS: 3589/1239 Part - I (wherever applicable), with Fittings, such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, welding, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, . The total pipe work shall be protected with approved painting system as per specification.for 200mm. Dia ( main pump header)

Supply, installation, pressure testing and commissioning of Above Ground Fire Hydrant medium Pipe Work with (Class-B) M.S Pipes, confirming to IS: 3589/1239 Part - I (wherever applicable), with Fittings, such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, welding, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, . The total pipe work shall be protected with approved painting system as per specification.for150mm. Dia ( Ring & FBI line )

Supply, installation, pressure testing and commissioning of Above Ground Fire Hydrant medium Pipe Work with (Class-B) M.S Pipes, confirming to IS: 3589/1239 Part - I (wherever applicable), with Fittings, such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, welding, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, . The total pipe work shall be protected with approved painting system as per specification.for 100mm. Dia (Sprinkler header & Terrace tank line)

Supply, installation, pressure testing and commissioning of Above Ground Fire Hydrant medium Pipe Work with (Class-B) M.S Pipes, confirming to IS: 3589/1239 Part - I (wherever applicable), with Fittings, such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, welding, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, . The total pipe work shall be protected with approved painting system as per specification.for 80mm. dia. ( hydrant valve line - inside)

Supply, installation, pressure testing and commissioning of Above Ground Fire Hydrant medium Pipe Work with (Class-B) M.S Pipes, confirming to IS: 3589/1239 Part - I (wherever applicable), with Fittings, such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, welding, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, . The total pipe work shall be protected with approved painting system as per specification.for 65mm dia ( drain main header)

Supply, installation, pressure testing and commissioning of Above Ground Fire Hydrant medium Pipe Work with (Class-B) M.S Pipes, confirming to IS: 3589/1239 Part - I (wherever applicable), with Fittings, such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, welding, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, . The total pipe work shall be protected with approved painting system as per specification.for 50 mm dia ( drain branch)

Supply, installation, pressure testing and commissioning of Above Ground Fire Hydrant medium Pipe Work with (Class-B) M.S Pipes, confirming to IS: 3589/1239 Part - I (wherever applicable), with Fittings, such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, welding, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, . The total pipe work shall be protected with approved painting system as per specification.for 40 mm dia (sprinkler )

Supply, installation, pressure testing and commissioning of Above Ground Fire Hydrant medium Pipe Work with (Class-B) M.S Pipes, confirming to IS: 3589/1239 Part - I (wherever applicable), with Fittings, such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, welding, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, . The total pipe work shall be protected with approved painting system as per specification.for 32 mm dia (Sprinkler)

Supply, installation, pressure testing and commissioning of Above Ground Fire Hydrant medium Pipe Work with (Class-B) M.S Pipes, confirming to IS: 3589/1239 Part - I (wherever applicable), with Fittings, such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, welding, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, . The total pipe work shall be protected with approved painting system as per specification.for 25mm. dia. ( Sprinkler)

Supply, installation, pressure testing and commissioning of Under Ground Yard Hydrant medium Pipe Work with (Class-B) M. S. Pipes, confirming to IS :1239 Part - I, with But Welded Fittings, such as tees, elbows, check nuts, unions, flanges, nipples etc. including cutting, welding, laying in pipe trenches, providing supports, thrust blocks, higher sizes of Sleeves, wherever required, and protecting with approved painting system and bitumen based flexible wrapping, all as detailed in the specification.for 150mm. dia.

Supply, installation, pressure testing and commissioning of Under Ground Yard Hydrant medium Pipe Work with (Class-B) M. S. Pipes, confirming to IS :1239 Part - I, with But Welded Fittings, such as tees, elbows, check nuts, unions, flanges, nipples etc. including cutting, welding, laying in pipe trenches, providing supports, thrust blocks, higher sizes of Sleeves, wherever required, and protecting with approved painting system and bitumen based flexible wrapping, all as detailed in the specification.for 80mm. dia.

Excavation, refilling, compacting, providing PVC sleeves and concrete encasement, where ever required, construction of Thrust Blocks, required, making good the refilled surfaces etc. in connection with laying Under Ground Fire Lines. The rate shall be for labour charges only and exclusive of supply of PVC sleeves and materials required for mixing concrete.

Supply, installation, testing and commissioning of 100 mm dia Flange type Sprinkler Alarm valve of Ductile iron body and bronze working parts comprising of water motor alarm stainless steel seat, Ductile iron clapper ,bras clapper bush, EPDM cover gasket ,hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser sprinkler system activates pressure guage emergency releases strainer, pressure switch, cock valve, compleate with drain valve, and bypass test control box ball valves, pipe required size flange , gasket etcc complete as reuired as per the technical specification.

Supply, installation, testing and commissioning of 100 mm Dia Flow Switch, Vane type, IP 65 Protection, 20 Bar Working Pressure with all necessary accessories, for monitoring Fire Sprinkler System. The control cabling from flow switches to Fire Alarm Panel shall be measured separately.

Supply, installation, testing and commissioning of brass Sprinkler heads with quarts bulb, 68 degree, or equal with necessary accessories and fittings as per the specifications.-Pendant type

Supply, installation, testing and commissioning of Butterfly Valve, PN-16, slim seal, standard lever operated type confirming to BS:5155 with IS: 13095 Mark and with companion flanges, nuts, bolts etc.complete.for 100mm. Dia ( alarm valve-1, sprinkler -2)

Supply, installation, testing and commissioning of Butterfly Valve, PN-16, slim seal, standard lever operated type confirming to BS:5155 with IS: 13095 Mark and with companion flanges, nuts, bolts etc.complete.-50mm. Dia ( Sprinkler drain line)

Supply,installation,testing and commissioning of Electrical Driven main , Capacity: 2280 LPM , 55 Mtr Head, with CI Impeller, SS.Shaft, Mechanical Seal,coupled to 37KW/50HP 3000 RPM,class F insulated IP55 protection,IE2, TEFC,Squirrel Gauge Induction Motor completewith M.S. foundation,anti vibration mountings, compound/pressure gauge, water re- circulation arrangement, and all other necessary fixing accessories.The price must be inclusive all connected electrical and cable work.

Supply, installation, testing and commissioning of Jockey Pump Electrical Driven, for automatic pressurization of wet riser system in case of minor leakages consisting of the following. 1. End suction type fire pump Bronze impeller, 7.5 HP delivering 180 LPM against 55 Mtr head 2. Motor suitable for 415V, 3 phase AC supply of suitable HP . 3. Common bed plate of requsite strength manufactured out of MS channel type. 4. The price must be inclusive all connected electrical and cable work.

Fire Pump Panel: Supply,Installation,testing and Commissioning of Motor Control Panel for Fire pumps incorporating starters and Switch gear suitable for the motor HP .The control panel shall be powder coated with signal red Color 7 pool tratments fabricated out16SWG CRCA Sheet floor mounted type with all accessories as required etc.complete with Control and Power terminals ,etc. with the following complete with all accessories as per Kerala Electrical Inspectorate Standards. 1) Busbars: 200Amp Al Busbar - 1Set for 3 phase Earth bus - 25.4 x 3.15mm CU. 2) Incomer: 200A TPN isolator - 1No. Meters & Indications: Red, Yellow, Blue LED Indication Lamps along with 3nos 2A Control fuses - 1set. 3) Outgoings: TP Isolator/SFU 100A - 1 Nos with Star Delta starters- (As per local inspectorate rule) -1 No. DOL starter for 7.5 HP/5HP – 2 Nos, 32A TP SFU - 1 No for Diesel engine battery charger Outgoing cabling of suitable size Aluminium armored cable /copper including earthing with GI strips .(Earthing and cabling considered only for Panel To pump sets, Main earthing and incomer cable shall be provided by the client)(fabricated)

Supply, installation, testing and commissioning of Electrically driven Mono block terrace pump of capacity pf 450 LPM with cast iron casing,C.I. impeller and all the nacessery accessories operating on 3 ph 50 hz 415 V supply including foundation holts etc complete, the pump set shall be 5 HP .( including required Foundation)civil work is not Included

Supply,Installation testing and commissioning of 3 core x 6sq mm Aluminium armoured cable 1.1 KV for booster pump - Jocky pump

Supply,Installation testing and commissioning of 3 core x 35 sq mm Aluminium armoured cable 1.1 KV for main pump

Supply,Installation testing and commissioning of 150mm x 2.5 Mtr G I cable trey for cabling in the fire pump room

Supply, installation, testing and commissioning of Pressure (Diaphragm) Vessel, with 1.2 Mtr Height 200 mm dia 20 Bar working pressure and with automatic air release valve, as per specifications, and all other necessary accessories.

Supply, installation, testing and commissioning of Butterfly Valve, PN-16, slim seal, standard lever operated type confirming to BS:5155 with IS: 13095 Mark and with companion flanges, nuts, bolts etc.complete.for 80mm. Dia

Supply, installation, testing and commissioning of Butterfly Valve, PN-16, slim seal, standard lever operated type confirming to BS:5155 with IS: 13095 Mark and with companion flanges, nuts, bolts etc.complete.for 50 mm Dia

Supply, installation, testing and commissioning of Pressure Switches with ball valve, pressure rating suitable for above Fire Pumps.

Supply, installation, testing and commissioning of Dual Plate Non Return Valve,PN-16 of following size confirming IS:5312 complete with CI body and GM moving parts with companion flanges, gaskets, nuts, bolts,washer etc. complete & tested to 1.5 times working pressure.for 150mm. ( discharge line -2, FBI-1)

Supply, installation, testing and commissioning of Dual Plate Non Return Valve,PN-16 of following size confirming IS:5312 compleate with CI body and GM moving parts with companion flanges, gaskets, nuts, bolts,washer etc. complete & tested to 1.5 times working pressure.for 100mm.( terrace pump-1, jocky pump -1)

Supply, installation, testing and commissioning of Expansion Bellows /Flexible Connectors with flanges and with companion flanges, nuts, bolts etc.complete.for 150 mm dia ( suction -2 ,Discharge-2)

Supply, installation, testing and commissioning of Expansion Bellows /Flexible Connectors with flanges and with companion flanges, nuts, bolts etc.complete.for 100mm.dia ( jocky suction-1 Discharge-1)

Supply, installation, testing and commissioning of 'Y' TYPE STRAINER of following sizes having C.I. body with companion flanges, S.S Mesh, gaskets, nuts, bolts, washers etc. complete & tested to 1.5 times working pressure for -150 mm dia

Supply, testing, commissioning and install in position following Portable Fire Extinguisher as per BIS: 15683:2006 and with relevant ISI Stamping/Marking.-CO2 - 4.5 Kg.

Supply, testing, commissioning and install in position following Portable Fire Extinguisher as per BIS: 15683:2006 and with relevant ISI Stamping/Marking.-ABC Dry Chemical, powder Type - 4 Kg.

Supply, testing, commissioning and install in position following Portable Fire Extinguisher as per BIS: 15683:2006 and with relevant ISI Stamping/Marking.-Fire stand with Bucket. (3 Buckets in a raw)

Supply, installation, testing and commissioning of Main Fire alarm control panel of 8 zones capacity,with 7AH 12 V Battery with visual LED indications for fire / fault alarms, signals and should have stage alarm facility. The panel shall be fabricated by M.S. sheet and powder coated both inside & out side, door shall be glass fronted type with locking arrangement, as per specification.

Supply, Installation, Testing and commissioning of smoke detector having optical chamber continued with connected circuits provides efficient and accurate detection of smoke.

Supply, Installation, testing and commissioning of Manual Call Point break glass type as per standrad specification.

Supply, installation, testing and commissioning of Electronic Hooter with strobe as per standard specification.

Supply, installation, testing and commissioning of Fire Alarm Cable -2 x1.5 sq.mm copper armored cable with nacessery accessories ISI mark.

Supply installation testing and commissioning of 1 sq mm PVC insulated copper wires

Supply, installation, testing and commissioning of 20 mm dia PVC conduit ISI mark.

Fire Exit - Supply,installation,testing and commissioning of emergency lights printed on 5 mm thick acrylic sheet connected to alternate source of power.

Supply and fixing of photoluminescent auto glow signages printed on 5mm thick foam board of size 12*6 inches dia.-No Smoking : ( size 12*6 inches dia.)

Supply and fixing of photoluminescent auto glow signages printed on 5mm thick foam board of size 12*6 inches dia.-Fire Duct : ( size 12*6 inches dia.)

Supply and fixing of photoluminescent auto glow signages printed on 5mm thick foam board of size 12*6 inches dia.-Fire Cabinet ( size 12*6 inches dia.)

Supply and fixing of photoluminescent auto glow signages printed on 5mm thick foam board of size 12*6 inches dia.-Fire Assembly Point (24*20 inches)

Supply and fixing of photoluminescent auto glow signages printed on 5mm thick foam board of size 12*6 inches dia.-Evacuation Plan : Supply and fixing of Fire evacuation plan of suitable size(A3) fixed on wall with nacessery accessories.

RCC Core Cutting is about making precise, circular cuts for creating holes of required diameters for fire fighting works. The core drilling rod is fitted with diamond pieces at the drilling end. The core cutting machine can be used for both horizontal and vertical hole making purposes for the approval of the engineer for 180 mm dia.

RCC Core Cutting is about making precise, circular cuts for creating holes of required diameters for fire fighting works. The core drilling rod is fitted with diamond pieces at the drilling end. The core cutting machine can be used for both horizontal and vertical hole making purposes for the approval of the engineer for150 mm dia.

Documentation -Preparation of nacessery documents, forms,drawings,schemes, certificate etc procuring approvel for the drawings , coordinating site inspections and statutory sanction from the state fire authority for the installation , all expence statutory charges shall be paid by the contractor (excluding Govt charges, Govt chelan Fees etc)

Annual Maintenance Contract for three years for all the fire fighting works including all equipements which should not exceed 15% of the total contract. Servicing and Testing of entire fire fighting & Fire Alarm System including renewa lof FINAL NOC( 4 visit /Year).AMC charges are payable at the end of every year against the GST bill submitted by the contractor and after reviewing the perfomance of the contractor

Allies Fire Systems Pvt Ltd