Mechanical work to be carried out at lift irrigation scheme Kanispora

Amount

Dismantling of pump at site by way of disengaging of 75Hp, 3Ø motor from coupling, disassembling of discharge head from base plate, disengaging of column pipes from discharge bend, removing of column pipes and unscrewing of shafts at couplings one by one in a careful manner and then lifting of entire bowl assembly. The job involves using of highly skilled labour for careful disassembling of pumping unit which requires both skill and patience. The disassembled parts are then loaded in private load carrier to work shop for repairs 01 cusec, 1470rpm, 75 Hp motor, VT, single stage

Fabrication, Providing and fitting of Gun metal rubber insert Bush of Center kit having OD = 60mm, ID = 47MM & Length = 80mm

Fabrication, Providing and fitting of Gun metal rubber insert Bush of bowl having OD = 60mm, ID = 47MM & Length = 80mm

Fabrication, Providing and fitting of Gun metal rubber Bush of suction bell mouth having OD = 60mm, ID = 47MM & Length = 140mm

Fabrication, Providing and fitting of G.M wearing ring of size OD 310mm, ID 300MM & Width 40mm

Fabrication, providing and fitting of pump shaft of SS material of size 40mm and 2440mm long. The job also includes the charge for making threads, necessary key ways as per sample.

Fabrication, providing and fitting of pump shaft of SS material of size 40mm and 1220mm long . The job also includes the charge for making threads, necessary key ways as per sample.

Fabrication, providing and fitting of pump shaft of SS material of size 40mm and 1530mm long. The job also includes the charge for making threads, necessary key ways as per sample.

Fabrication, providing and fitting of pump shaft of SS material of size 50mm and 1220mm long. The job also includes the charge for making threads, necessary key ways, and screw coupling as per sample.

Fabrication, providing and fitting of check nuts, screw couplings, sleeves facing of bowl parts and other allied works as per sample

Providing & fitting of adhesive material for connecting various parts

Replacement of rusted nuts/bolts, studs with new ones wherever required for the completion of work.

Back carriage and reassembling of entire pumping unit in a sequential manner for proper fitment and alignment of mating parts at site. The job involves fitting of nuts and bolts for column pipes, discharge bend, base plate etc. and testing on full load. All the tools and tackles for disassembling/reassembling shall be provided by contractor.

NEW S M ENTERPRISES

M/s BUHROO MECHANICAL WORKS