Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹17,990
Closing Date
9 Sept 2026, 11:00 pm
Karnataka Power Corporation Limited
VENKATESH G
9449596558
1Supply of Junction Boxes a)Supply of suitable industrial-grade junction boxes as per the technical specifications indicated in the bid document along with complete accessories viz,terminal blocks,Cable glands, mounting rails,ferrules, labels and any other hardware required for mounting/installation of Junction boxes.2.Installation and Mounting of Junction Boxes a)Installation/mounting of junction boxes at the locations identified by the Engineer-in-Charge b)Providing all necessary supports, brackets, fasteners and hardware required for proper installation c)Routing and dressing of cables in an orderly and mechanically protected manner.3.Cable Laying a)Laying of required control/instrumentation cables from the field ESP hopper high-level contact/controllers to the respective field junction boxes b)Further laying of cables from the junction boxes to the PLC system/control room termination points, as required c)Cable laying shall be carried out through existing cable trays, trenches, conduits or other approved routes wherever available d)Any minor routing/support arrangements required for cable laying shall be included in the contractor scope.4.Cable Termination a)Termination of all cables at field devices, junction boxes and PLC-side termination points. b)Termination of all cables at field devices, junction boxes and PLC-side termination points. c)Termination of all cables at field devices, junction boxes and PLC-side termination points.5.Interconnection and Integration a)Interconnection of the ESP hopper high-level contacts with the existing PLC system of Unit 5 &6 AHP. b)Verification of point-to-point wiring and correctness of signals at the PLC. c)Modification/provision of termination arrangements wherever required for successful integration with the existing PLC system.6.Testing and Commissioning a)Continuity, insulation and point-to-point testing of all newly laid cables and wiring. b)Functional testing of each ESP hopper high-level contact from the field up to the PLC system. c)Rectification of any wiring, termination or communication-related defects observed during testing and commissioning.
KPCL/2026-27/PS/WORK_INDENT4694
KPCL/2026-27/PS/WORK_INDENT4694
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Executive Engineer IOLA2 Office RTPS Raichur
10 documents required · 8 mandatory · 2 optional
a) The intending bidder should have experience in supply and installation of instrumentation/electrical junction boxes and shall have carried out cable laying works in any thermal power stations OR process industries. And should have also carried out at least one I&C work. As a proof of this, relevant documents shall be uploaded in the bid document. b) The intending bidder should have satisfactorily completed (as a prime contractor) at least one such work of value not less than Rs.4.25 Lakhs, in any one of the preceding five financial years (i.e 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26) in any thermal power stations of capacity not less than 210 MW OR any process industries. As a proof of this the bidder should upload a single work order and its corresponding work done certificate issued by the competent authority not below the rank of chief engineer in case of KPCL works and not below the rank of executive engineer and equivalent in case of other government/private organisations.
The intending bidder should be a CLASS-I/CLASS-II Electrical contractor. As a proof of this, valid electrical license issued by the competent authority of government of Karnataka shall be uploaded in the bid document
The intending bidder in his name should have achieved an average financial turnover of Rs.8.5 Lakhs in at least two financial years during the last five years (i.e 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26). As a proof of this, the bidder shall upload certified copy of the profit and loss account OR turn over certificate duly certified by Chartered Accountant.
Department Registration Details
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing work
List of works for which tenders already submitted
Banker Details
₹500
₹17,990
24 Aug 2026
24 Aug 2026
12 Sept 2026
4 Sept 2026
2 Sept 2026
Supply of junction boxes and cable laying for integrating ESP hopper high level contacts from field controllers to PLC system of Unit-5&6 AHP.
(For detailed technical specification refer details mentioned under the head of technical specifications in tender document) ---- As per bid document
Supply of Cable Glands. (Cable Gland size as per requirement) ---- As per bid document
Supply of Fuse type Terminal blocks. ---- As per bid document
Supply of Cable Lugs 0.5 Sq.mm & 1.5 Sq.mm. ---- As per bid document
Mounting of Junction boxes with required accessories & cable tray installation works. ---- As per bid document
Cable Glanding & Cable Terminations at Local JB’s and PLC cabinets. ---- As per bid document
Cable Laying Charges: Cable laying , rerouting from field instruments to new junction boxes ---- As per bid document
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender DOC FINAL.pdf
Tender Document • 0.69 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].