SITC OF FIRE PUMP AND RELATED WORK AT SCHOOL BUILDING AT F.P. NO: 122, T.P.NO: 121 ( NARODA-HANSPURA-KATHWADA) IN NARODA WARD, NORTH ZONE, AHMEDABAD

Name of Work : SITC OF FIRE PUMP AND RELATED WORK AT SCHOOL BUILDING AT F.P. NO:

T.P.NO: 121 ( NARODA-HANSPURA-KATHWADA) IN NARODA WARD, NORTH ZONE,

Bill of Quantities

Unit Rate Amount

I. No. Qty Items Per

FIRE FIGHTING SYSTEM

Design,Drawing, Supply,installing,testing and

commissioning of FIRE HYDRANT WORKS

1.1 1 Supplying, Installation, Testing and Commissioning of 143626.00 SET

electric driven main Hydrant fire pump and Sprinkler

pump suitable for automatic operation and consisting of

following: complete in all respect as required.

a) Horizontal type, single stage, centrifugal, end suction

pump of cast iron body & bronze impeller with stainless

steel shaft, mechanical seal to ensure a minimum pressure

of 3.5 kg/sq. cm. at highest and farthest outlet at specified

flow of 1620 lpm at 56 Mtr. head conforming to IS

1520.with suitable size of footvalve confirming to IS

Pressure rating PN2 , preventing entry of foreign body to

pump through suction pipe, perfectly flat seating surfaces

for good sealing.

b) Suitable HP Squirrel cage induction motor, TEFC,

suitable for opertion on 415 volts, 3 phase 50 Hz. AC with

IP 55 class protection for enclosure, horizontal foot mounted

type with Class - 'F' insulation, conforming to IS-325.

c) M.S. fabricated Common base plate, coupling, coupling

guard, foundation bolts etc. as required.

d) Suitable cement concrete foundation duly plastered with

anti vibration pads.

The pump shall be capable of giving not less than 150%

discharge at ahead not less than 65% of the rated head.

1.2 1 Supplying, Installation, Testing and Commissioning of 61717.00 SET

electric driven pressurisation pump suitable for

automatic operation and consisting of following: complete in

all respect as required

b) Suitable HP Squirrel cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase 50 Hz. AC with

IP 55 Class of protection for enclosure, horizontal foot

mounted type with Class F' insulation, conforming to IS :

c) M.S. fabricated Common base plate, flexible rubber

coupling, coupling guard, foundtion bolts etc. as required.

a) Horizontal type, single stage, centrifugal, end suction

pump of cast iron body and bronze impeller with stainless

steel shaft, mechanical seal at specified flow of

180 lpm at 70 m. head conforming to IS:

1.3 Supplying, Installation, Testing and Commissioning of

diesel engine driven main fire pump suitable for

automatic operation and consisting of following: complete in

all respect as required

b) Suitable HP, 1500 /1800 RPM water cooled with

radiator, diesel engine conforming to relevant BS & IS

standard complete with auto starting mechanism, 12/24

volts electric starting equipment, 180 AH lead acid battery

with battery stand, exhaust pipe extended upto 6 m.

outside pump house duly insulated with 50 mm thick glass

wool with 1.0 mm. thick aluminium sheet cladding,

residential silencer, instruments and protection as per

specification, stop solenoid for auto stop in the event of fault

with audio indications, painted with post office red colour

etc. as required.

c) One 200 Ltr capacity day oil storage tank fabricated from

3 mm thick M.S. plates. Tank shall be provided with inlet,

outlet, overflow, air vent, drain connections, filling

connection & level indicator. Tank shall be mounted on a

suitable steel structure (Painted with 2 coats of red oxide

paint). Tank shall be provided with two or more coats of

synthetic enamel paint outside over two coats of red oxide

d) M.S. Fabricated Common base plate, coupling, coupling

guard, foundation bolts etc. as required.

e) Suitable cement concrete foundation duly plastered with

anti vibration pads.

a) Horizontal type, single stage, centrifugal, end suction

pump of cast iron body and bronze impeller with stainless

steel shaft, mechanical seal to ensure a minimum pressure

of 3.5 kg/sq. cm at highest and farthest outlet at specified

1 1620 lpm at 70 mtr. head conforming to IS 1520. 482265.00 SET

2 1 FIRE CONTROL PANEL FOR Main Hydrant pump and 258883.00 No

Jockey pump and Diesel Engine pump.

Fabrication, Supplying, Installation, Testing &

Commissioning of electrical control panel of cubical

construction, floor mounted type, fabricated out of 2mm

thick CRCA sheet, compartmentalised with hinged lockable

doors, dust and vermin proof, powder coated of approved

shade after 7 tank treatement process, cable alley, inter-

connection, having switchgears and accessories mounting

and internal wiring, earth terminals, numbering etc.

complete in all respect, suitable for main fire pump,

pressurisation pump complete as per CPWD specification

with following in coming and Outgoings, suitable for

operation on 415V, 3 phase, 50Hz Ac Supply with enclosure

protection class IP 42 as required :suitable for operation on

415 V, 3 phase, 50 HZ, AC supply with enclosure protection

class IP 42 as required.

A. Incoming Feeder:-

(i) 1 No of 125 A,25KA, 415V,FP MCCB with

Thermalmagnetic Based Releases having O/C, S/C ,E/F

protection, Digital ELR 96x96mm with CBCT, FP Spreader

Terminals 1 set= 8 Pcs, Extended Rotory Handle for MCCB,

240V AC Shunt Trip coil for MCCB.

(ii) LED type indicating Lamp with suitable rating 2 Amp SP

MCB:- 1 Set (each set comprise of R,Y,B)

(iii) Digital type 3 phase Multi function Meter with suitable

rating of MCB & 3 Nos. of single core epoxy resin cast type

CTs of 125/5 Amps, 10 VA, CL 1.0 ratings -1 Set.

415 V, 125 Amps, FP Aluminium Busbars with Heat

shrinkable color code insulation sleeves.

OUTGOINGS:-( All outgoing feeders for pumps should have

digital Ammeter with selector switches and LED type

ON,OFF,Trip indicating Lamps )

1 sets - 80 A, 25kA TPN MCCB, Ics=100% Icu, with fully

automatic Star/Delta starter suitable for 60 HP pump with

overload protection, current sensing type single phase

preventor complete with all acceessories and internal wiring

required for automatic operation,selector switch for

local/remote, auto/manual/OFF operation.

1 no.40A,10KA MCB Ics=100%,Extended Rotry handle

with TM release having O/C & S/C protection with 10 HP

fully automatic star/ delta starter , current sensing type,

Single Phase Preventer, ON/OFF Push Button & LED type

Indicating lamps complete with all accessories and internal

wiring required for automatic operation, selector switch, for

local/remote, auto/manual operation

Diesel Engine Control.

Control for Diesel Engine comprising:

i) Auto/Manual selector switch & 3 attempt starting device,

timers and relays as required, push buttons, start/stop in

ii) LED type Indication lamp for High/Low Lub. Oil pressure,

High Water Temp and Engine ON indication.

iii) Battery charger suitable for 12 V/24 V DC with boost and

trickle selector switch, 0-30 V DC volt meter, 0-20 Amp DC

iv) All standard relays, accessories for automatic operation

of diesel engine, wiring with 1.5 sq mm PVC insulated

copper wire between various sensors and system controller

/ starter, suitable size cable for battery charging etc. as

System Controller

Designing, Supply, Installation, Testing and Commissioning

of system controller to control operation of Main Electric Fire

Pump, Diesel Pump, Pressurisation Pump, Terrace Pump in

sequence as per specification consisting of relays, timers,

sensors, annunciation window for fault indication, control

wiring complete as specification.

3 NOS. 25A DP MCB " C " Curve

3.1 Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S. housing.

1 ICS=100% of ICU only 8773.60 No

3.2 providing and erecting Approved make Earth fault Relay

suitable to mount with inter connection suitable to following

size of moulded case circuit breaker having CT ratio &

MCCB rating as following along with shunt trip 220V AC.

with all internal connections & complete erected in existing

4 providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required.

20 (h) One wire 25.00 sq. mm 234.00 Mtr

5 1 Supplying, Installation, Testing and commissioning Sewage 19676.50 No

water submersible pumping sets of CI casing & impeller,

SS shaft, including with inbuilt water level sensors for

operating the pumps automatically and all accessories

suitable for operation on 220 V-240 V, single phase, 50 Hz.

AC supply etc. as reqd.

> 10 mm solid handling capacity,Minimum Capacity -

50 LPM,Minimum Head > 13.5 Mtr

Signature of contractor Additional City Engineer ( NORTH ZONE)

Seal Ahmedabad Municipal Corporation

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT- NORTH ZONE

NAME OF WORK:- SITC OF FIRE PUMP AND RELATED WORK AT SCHOOL BUILDING AT F.P. NO:

T.P.NO: 121 ( NARODA-HANSPURA-KATHWADA) IN NARODA WARD, NORTH ZONE, AHMEDABAD.

FINANCIAL BID ( To Be Submitted Online Only )

Sr. No. Description Amount

1 Amount For SITC of Fire Fighting Work Rs.

I/We am/are willing to carry out work at ______ % Above / Below (should be written in figures

and words) The Estimated Cost Mentioned Above.

Estimated cost put to tender: Rs.9,84,555.10 Estimated cost put to tender: Rs.

Add_____% above : Rs ___________ Deduct_____% below : Rs __________

In words : Rupees _______________________ In words : Rupees_____________________

Signature of contractor Additional City Engineer (NORTH ZONE)

Seal Ahmedabad Municipal Corporation