Loading
Loading…
Loading…
Tender Value
₹78.4 L
EMD Value
₹1.6 L
Closing Date
16 Jul 2026, 12:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SRDEEG/SEE
16 conditions · 5 needing a document upload
Contractor should have to be registered with Employee Provident Fund Organization (EPFO). It is mandatory for contractor to submit PF code provided by EPFO with their tender offer. Also each contractor has to submit "UAN" of their worker with their offer and have to mention in tender document. It is mandatory. Otherwise offer will not be considered for further action and your offer will summarily be rejected.
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of 'V/N'or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
As per CE/Works/HJP's letter no. ECR-HQ0ENGG(CONT)/0009/2025, dated 18.11.2025 "The balance sheet and all other financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfillment of Financial Eligibility Criteria should be with UDIN, failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference."
The tenderer shall posses the valid Electrical Contractor's license and Supervisory License issued by any State/Central Govt. licensing board for the required voltage level or above with their tender paper. Tenders without valid electrical contractor's license & Supervisory license will summarily be rejected.
"ELIGIBILITY CRITERIA:- Document required to be submitted in support of Technical Eligibility Criteria: Tenderer should have completed at least one similar single work. The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Similar nature of works (as defined and approved by competent authority) for "Improvement of lighting arrangement at LC gate over Sonpur Division." is (i) Erection of LT or above voltage level distribution panels. (ii) Erection and commissioning of LT or above voltage level line (over head or underground). (iii) Electrification/Rewiring service buildings, bungalow and quarters. (iv) Supply and erection of tower light. (v) Lighting of station/ Administrative building / circulating area."
27 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderers whether sole proprietor , a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement , receive money, witness measurements, sign measurement books , compromise, settie, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration.
Contractor should have to be registered with Employee Provident Fund Organization (EPFO). It is mandatory for contractor to submit PF code provided by EPFO with their tender offer. Also each contractor have to submit "UAN" of their worker with their offer and have to mention in tender document. It is mandatory. Otherwise offer will not be considered for further action and your offer will be summerisely rejected. You are also instructed to submit monthly payment challan to the person/labour engaged for execution of the work having valid UAN no with bill. This is to be followed strictly as per GCC & as per instruction of labour enforcement officer under Govt of India.
Inclusion of 'Letter of Credit' as Mode of Payment in Works Tenders or Service Tenders as per Railway Board's letter no. 2018/CE-I/CT/9 dated 04.06.2016 remarks from Tenderer required.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
JOINT VENTURE will not be permitted for the tenders.
Any Conditional offer will be summarily rejected.
Rates are inclusive of all taxes/GST, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
Railway Administration reserves the right to change/Alter/Cancel the tender without any notice.
Improvement of lighting arrangement at LC gate over Sonpur Division.
L-Open-26-27-07Dt24-06-26
L-Open-26-27-07Dt24-06-26
Open
Works - General
180 Days
Saran, Bihar
₹0
₹1.6 L
16 Jul 2026
24 Jun 2026
2 Jul 2026
53 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 78,37,344.26 | ||
| — | 530.00 | — | — | ||
| Wiring for light point/Fan point/Ex. Fan Point/Call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switches, modular plate, suitable box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Make:- Legrand, Siemens, L&T, Anchor, ABB, Havells, Crabtree, Benlo. | — | — | — | 2,63,940 | |
| — | 350.00 | — | — | ||
| Wiring for 5 pin 5 Amp. plug point with modular switch with modular plate 1.5 Sq.mm FR PVC insulated Copper conductor single core multistrand cable in concealed/surface PVC heavy gauge conduit and earthing point with 1.5 sq.mm FR PVC insulated copper wire including supply & fixing of 5 pin, 5 Amp socket outlet , 5 amp switch. piano type earthing the third/fifth pin etc. as required. Make:- Legrand, Siemens, L&T, Anchor, ABB, Havells, Crabtree, Benlo. | — | — | — | 1,34,750 | |
| — | 320.00 | — | — | ||
| Supply, fixing, connection, and testing of 6 pin 16Amp. Modular socket with modular plate point on separate circuit and modular board: Supply of modular switch socket, fuse point and fixing, testing and commissioning on separate circuit and suitable board and wiring in concealed PVC conduit by using 4 sq.mm multistrand copper wire for phase and neutral, 1 x 1.5 sq.mm PVC insulated multi-stranded copper wire for earth from MDB/SDB/Board to this separate board. All material required for the job shall be supplied by contractor, Proper colour coding as per IE rules should be followed for wiring. Make:- Legrand, Siemens, L&T, Anchor, ABB, Havells, Crabtree, Benlo. | — | — | — | 96,320 | |
| — | 1500.00 | — | — | ||
| Wiring for submain along with earth wire with the size 2X2.5 sq.mm+1X2.5 sq.mm earth wire of PVC insulated copper conductor, single core cable in concealed/ surface/recessed PVC heavy gauge conduit as required. | — | — | — | 1,66,500 | |
| — | 1200.00 | — | — | ||
| Wiring for submain along with earth wire with the size 2X4 sq.mm+1X4 sq.mm earth wire of PVC insulated copper conductor, single core cable in concealed/ surface/recessed PVC heavy gauge conduit as required. The work shall be done as per CPWD Pt.I, manual(1972) for general specification of electrical work. All materials should be IS marked. | — | — | — | 1,54,800 | |
| — | 150.00 | — | — | ||
| GI pipe earthing with 4.5 M long x40mm dia. With salt & charcoal .Make of GI pipe TATA/Jindal or equivalent superior make. | — | — | — | 2,69,175 | |
| — | 1500.00 | — | — | ||
| Supply &Laying of 6SWG GI wire as conductor earth electrode. | — | — | — | 17,160 | |
| — | 70.00 | — | — | ||
| Supply of 4 way MCB- DB. Make-ABB, L&T, Siemens, Schneider, Legrand, Havells, C&S. | — | — | — | 37,982 | |
| — | 280.00 | — | — | ||
| Supply of MCB 6-32A. Make-ABB, L&T, Siemens, Schneider, Legrand, Havells, C&S. | — | — | — | 59,536.4 | |
| — | 70.00 | — | — | ||
| Fixing & commissioning of MCB- DB with MCB. | — | — | — | 5,846.4 | |
| — | 70.00 | — | — | ||
| Supply & fix Of 4 strips CU BBC 300mm long made of copper strip suitable for 200Amp. Cap. Complete with all accessories including connection, earthing the body complete etc. as required. Make-Standard/ Havells/Benlo/C&S. | — | — | — | 4,11,530 | |
| — | 70.00 | — | — | ||
| Supply and fixing of 4 pole MCCB 100A with enclosure. Make - L&T, Siemens, Hager, Legrand , ABB, Benelo, Schneider, C&S. | — | — | — | 5,01,827.2 | |
| — | 300.00 | — | — | ||
| Supply & delivery of OREVA 40 W 4000 K LED Tube light Brand: OREVA Brand type : registered Brand Catalogue Status : Catalogue not verified by OEM Seling As : Reseller not verified by OEM Category Name & Quadrant : Light emitting diode LED fixture- LED tube light (Q3) Model: silver-40W (4Ft) HSN Code: HSN not specified by seller. Make:- Havells, C&S, Bajaj, Oreva or similar. Warranty 05 Years from the date of installation. | — | — | — | 2,77,500 | |
| — | 300.00 | — | — | ||
| Fixing & commissioning of LED/LED street light fitting with tube. | — | — | — | 10,137 | |
| — | 70.00 | — | — | ||
| Fixing of ceiling fan. | — | — | — | 5,065.9 | |
| — | 70.00 | — | — | ||
| Installation, testing, fixing & commissioning of exhaust fan 300/380/450mm sweep in the existing opening including making the hole to suitable size for above fan, making good the damage with cement concrete including connection earthing the body complete etc. as required. | — | — | — | 11,480 | |
| — | 100.00 | — | — | ||
| Supply & delivery of LED flood light fitting 70 watt. Make- Phillips, NICHIA, OSRAM, SEOUL, GE, Thorn, LEDNIUM. Make:-Havells, C&S, Bajaj, Phillips. Warranty 05 Years from the date of installation. | — | — | — | 6,25,515 | |
| — | 256.00 | — | — | ||
| Installation testing commissioning and supply of 20 W LED (4 Ft) inverter LED batten with square profile and polycarbonate channel lithium ion battery with charging time 8 hours- 10 hours and backup time upto 4 hours indoor tube light fitting. Wiring/connection of fitting with not less than 1.5 sq.mm cu. similar to Havells cat no.LHEXACP7FN1W020, Wire through PVC flexible pipes. Fixing of fitting with aluminium clamps and steel nut bolts. Luminaire warranty period will be five years from the date of Installation. Make:-Havells, C&S, Bajaj, Phillips, Crompton, Great white. | — | — | — | 96,399.36 | |
| — | 1200.00 | — | — | ||
| Supply & fixing of medium class GI pipe 50mm dia. Make TATA/Jindal For protection of UG cable. | — | — | — | 3,56,040 | |
| — | 140.00 | — | — | ||
| Supply, delivery & Fixing of octagonal pole hot Dip Galvanized in single dip average 70 micron DFT, designed for maximum wind speed of 169KM/Hr.,BOP-7030 type pole of 6 m long, top dia 70mm, bottom dia. 130mm sheet thickness 3mm, in single section with Base plate (220x220x12)mm (LxBxT) with 4x20mm dia. 700mm long with 100mm projection foundation bolt complete with smart pack junction box with bakelite sheet, 6A MCB & stud terminals (for mounting inside base component of pole) and internal wiring for terminal to fitting with 2x2.5 sq.mm cable including single arm 1 mtr. long suitable for 3 to 10 mtr. pole of reputed make. Make - Bajaj, Transrail, Bansal, Jindal, Gammon Group. | — | — | — | 16,53,540 | |
| — | 140.00 | — | — | ||
| Making of foundation suitable for 3 to 8 mtrs. octagonal pole as per site in- charge/4'X4'X4'manufacturer dimension & as per site requirement. | — | — | — | 6,86,700 | |
| — | 100.00 | — | — | ||
| Supply of (out door) 90 W LED street light luminaire made of pressure die cast aluminium housing LED street light luminaires with IP65, with five year warranty. Make of luminaire & Tube- Philips, Bajaj, Crompton Greaves. Warranty/Guarantee 05 Years from date of installation. | — | — | — | 7,22,200 | |
| — | 90.00 | — | — | ||
| Supply of (out door) 45 W LED street light luminaire made of pressure die cast aluminium housing LED street light luminaires with IP66, with five year warranty Surya Product Code- SLE UL 45 W IP66 LXN.Make of luminaire & Tube- Philips, Surya, Bajaj, Crompton Greaves. Warranty/Guarantee 05 Years from date of installation. | — | — | — | 3,71,880 | |
| — | 50.00 | — | — | ||
| Supply, making, fixing & commissioning of 32mm dia. X 2mtr. Long GI pipe for OD light fitting. | — | — | — | 18,500 | |
| — | 90.00 | — | — | ||
| Installation, testing & Commissioning of LED street light fitting complete with all accessories on wall/ on rail pole/tubular pole including connection with 1.5 sq. mm Cu. conductor S/C stranded cable with heavy duty conduit pipe PVC insulated weather proof earthing the body complete etc. as required. | — | — | — | 24,300 | |
| — | 8000.00 | — | — | ||
| Laying of LT cable direct in ground of size 25-120 sq.mm complete. | — | — | — | 8,58,720 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
I_CT_GCC-
ATTACHMENT
GCCACS1-9.pdf
ATTACHMENT
Advancecorrectionslipno.10.pdf Advance correction slip no 10
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
Tender document
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
Advancecorrectionslipno.10.pdf
ATTACHMENT
TenderdocumentPH-30LCgateoverSEEDivn..pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .