REPAIR REPALCEMENT PAINTING POLISHING CANNING OF STEEL AND WOODEN FURNITURE AT CGDHQ-4 AND BAY VIEW APPARTMENT, CGRA RAMESWARAM ,CGAE NEDUMBASSERY ,ICGS BEYPORE AND ICGS VIZHINJAM UNDER GE (I) (CG) KOCHI

Amount

ALMIRAH LARGE WITH SHELVES STEEL (FD-67(M)/1031/67) Dismantling the following old unserviceable/damaged part and replace/fix the same with new part to match with the existing item as per Drg.

Removing the existing Unserviceable locking device, supply and fix new three way locking device along with suitable lock of 55/65mm with brass lever with two key chromium plated for Almirah large with shelves steel.

Removing the existing unserviceable locks and supply and fix new lock 65mm size 6 lever with stainless steel duplicate key suitable for drawers. Make Godrej/Harrison/Mortice

Removing the existing Unserviceable handle, supply and fix new steel chromium plated handle 100mm long to the steel almirah large/medium.

M&L for One side leg of Almirah steel, left or right, 485 mm long, 100 mm wide and 100 mm high, open ends bent outwards upto 15 mm, covering the ends of channel with 100 x 100 mm MS sheet, 1.0 mm thick, welding the channel to bottom of almirah at 50 mm from the side of almirah including 2 coats of synthetic enamel paint olive green colour all as per specified and as directed.

M&L for Removing the existing Unserviceable shelves, supply and fix new shelves made of 1mm thick MS sheet of size 920mm x485mm for almirah large steel, and of size 910mmx 490mm for almirah large steel made to shape and size all as specified and as directed.

M&L for Removing the existing Unserviceable shutter, supply and fix new shutter made of 1mm thick MS sheet of size 1985mmx460 for almirah large steel, and of size 1800mmx 455mm for almirah large steel made to shape and size all as specified and as directed.

ALMIRAH MEDIUM STEEL FD-67/1032, FD-243 Dismantling the following old unserviceable/damaged part and replace/fix the same with new part to match with the existing item as per Drg.

Removing the existing Unserviceable locking device, supply and fix new three way locking device along with suitable lock of 55/65mm with brass lever with two key chromium plated for Almirah medium with shelves steel.

Removing the existing unserviceable locks and supply and fix new lock 65mm size 6 lever with stainless steel duplicate key suitable for drawers. Make Godrej/Harrison/Mortice

Removing the existing Unserviceable handle, supply and fix new steel chromium plated handle 100mm long to the steel almirah large/medium.

M&L for One side leg of Almirah steel, left or right, 440 mm long, 100 mm wide and 100 mm high, open ends bent outwards upto 15 mm, covering the ends of channel with 100 x 100 mm MS sheet, 1.0 mm thick, welding the channel to bottom of almirah at 50 mm from the side of almirah including 2 coats of synthetic enamel paint olive green colour all as per specified and as directed.

M&L for Removing the existing Unserviceable shelves, supply and fix new shelves made of 1mm thick MS sheet of size 760mm x440mm for almirah large steel and of size 910mm x 490mm for almirah large steel made to shape and size all as specified and as directed.

M&L for Removing the existing Unserviceable shutter, supply and fix new shutter made of 1mm thick MS sheet of size 1270mmx380 for almirah large steel and of size 1800mm x 455mm for almirah large steel made to shape and size all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of Almirah any type large or medium by removing all dents, filling with putty and applying one coat of syntheic enemal paint by spray painting of make -Berger/asian/Shalimar paints of approved shade /colour by GE all as specified and as directed by Engr-in-Charge.

LOCKER BED SIDE STEEL FD-127(M)/1029, FD-1028

S&F in replacement pedestals locker steel made out of 1.00mm thick plain black iron sheet including 1 coat of synthetic enamel (silver grey) paint over 1 coat of red oxide primer to locker steel complete all as specified and directed by Engr-in-Charge.

S&F in replacement shelves made out of PGI sheet 1 mm thick made to shape as per drg and painted with 2 coats of synthetic enamel paint(silver grey) over a coat of red oxide primer of locker complete all as specified and directed by Engr-in-Charge.

S&F in replacement handles aluminium onidised 100mm long D type of locker steel complete all as specified and directed by Engr-in-Charge.

S&F in replacement hasp & staples aluminium anodised 75mmx40mmx3mm thick safety type of locker steel complete all as specified and directed by Engr-in-Charge.

M&L for applying 1 coat of synthetic enamel paint (silver grey) with spray machine including preparation rectification and denting etc of steel surface of locker steel complete all as specified and directed by Engr-in-Charge.

TABLE OFFICE OFFICER AND TABLE OFFICE CLERK STEEL FD-84/1002/1003, FD-84(M)

S&F in replacement locking device of brass bright finish 6 lever with keys in duplicate for each lock to drawer/lockers to table office (office/clk) complete all as specified and directed by Engr-in-Charge.

S&F in replacement top of table office (officer) steel made from 18mm thick melamine shade pre laminated particle board including 4mm thick teak wood beading all round complete all as specified and directed by Engr-in-Charge.

S&F in replacement top of table office (clk) steel made from 18mm thick melamine shade pre laminated particle board including 4mm thick teak wood beading around complete all as specified and directed by Engr-in-Charge.

S&F in replacement drawer of table office (officer) steel made out of 1 mm thick PGI sheet duly painted with 1 coat of synthetic enamel paint over a 1 coat of red oxide primer complete all as specified and directed as Engr-in-Charge.

S&F in replacement drawer of table office (clk) made out of 1mm thick PGI sheet duly painted with 1 coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed as Engr-in-Charge.

M&L for repairing such as welding, lapping, tubing, reviting, bolting etc of drawers of table office steel (officer/clk) to make them in serviceable condition complete all as specified and directed by Engr-in-Charge.

M&L for applying 1 coat of synthetic enamel paint (silver grey) with spray machine including preparation rectification and denting etc of steel surfaces of table office (officer) steel complete all as specified and directed by Engr-in-Charge.

M&L for applying 1 coat of synthetic enamel paint (silver grey) with spray machine including preparation rectification and denting etc of steel surfaces of table office clerk) steel complete all as specified and directed by Engr-in-Charge.

TABLE 900X600x760MM WITH DRAWER FD-1008, FD 1009

Removal of unsv / broken Top of the table and S&F New top of size 900mmx 600mm made up of 18mm thick plywood BWR Gde of Make : Archid Ply/ Green Ply/ Century ply and laminate sheet of approved shade of Make: Archid Ply/Kit Ply/ century ply with 4mm with teak wood beadding with semi round shape all round the top of table.

M&L for Spot welding to broken steel parts of Table 3x2.

Removing existing unserviceble rubber shoes and replace with new 25mm dia hard rubber shoe for legs of make: AMK/polyton as approved by Engr-in-Charge.

M&L for Preparation of old painted steel surface of the Table by removing all dents filling with putty and spray painting with 2 coats of white synthetic enamel paint of Make: Berger/ Asian/ Shalimar paints complete, all as specified and directed by Engr-in-Charge

TABLE 900X600x760MM W/O DRAWER FD-1008, FD 1009

Removal of unsv / broken Top of the table and S&F New top of size 900mmx 600mm made up of 18mm thick plywood BWR Gde of Make : Archid Ply/ Green Ply/ Century ply and laminate sheet of approved shade of Make: Archid Ply/Kit Ply/ century ply with 4mm with teak wood beading with semi round shape all round the top of table.

M&L for Spot welding to broken steel parts of Table 3x2.

Removing existing unserviceble rubber shoes and replace with new 25mm dia hard rubber shoe for legs of make: AMK/polyton as approved by Engr-in-Charge.

M&L for Preparation of old painted steel surface of the table 3x2 by removing all dents filling with putty and spray painting with 2 coats of white synthetic enamel paint of Make: Berger/ Asian/ Shalimar paints complete, all as specified and directed by Engr-in-Charge

SHOE RACK STEEL FD/E6/MAP/02 (R)

M&L for Spot welding to broken joints/parts.

Removal of old broken Jali with frame and S&F new one made up of size 700mmx300mm of 20mm dia MS pipe with 03 mm dia rod of 700mm long and 300mm long duly welded complete as shown in drg and directed.

Removing existing unserviceble Hard rubber shoes and S&F with new one of size 25 to 30 mm dia of make : AMK/Polyton all as shown in drg.

M&L for Preparation of old painted steel surface of the Shoe rack by removing all dents filling with putty and spray painting with 2 coats of Black synthetic enamel paint of Make: Berger/ Asian/ Shalimar paints complete, all as specified in drg and directed by Engr-in-Charge

CHAIR VARANDAH MAP FD/E6/MAP/11, FD/E6/MAP-II/15

M&L for applying 1 coat synthetic enamel paint (Black) with spray machine including preparation rectification and denting etc of steel surfaces of chair varandah MAP complete all as specified and directed by Engr-in-Charge.

CHAIR CB WITH & W/O ARMS FD-75(M)

M&L for removal of old broken seat and S&F new Seat frame made out of well seasoned Hard wood (Teak) of size 535mmx560mmx30mm for chair with arms, finished with 02 coat of synthetic enameled paint black colour of Make:Berger/ Asian/ Shalimar and canned with 2mm wide 1/2 round and 0.4mm thick white cane of make Premier/Maharashtra Co/Shah woven in Godrej pattern. Frame of seat shall be fixed with chair with 4 Nos machine made nuts, bolts with washer providing hole in the pipe and seat frame, rest all as shown in drg and directed by Engr-in-Charge.

All as per item no 9.01 here-in-before but for back.

M&L for removal of old unsv MS strip and S&F 02 Nos New MS strip (Flat Iron) shall be 3mm thick, 20mm wide and length 535mm for Chair with arms, to be welded to the steel tube at the both ends to provide support to seat and back of chairs.

M&L for removal of old broken /unsv wooden Arms and S&F new arms must be made well seasoned Hard wood (Teak) of size 300mmx50mmx25mm, finished with 02 coat of synthetic enameled paint of black colour of Make:Berger/ Asian/ Shalimar made to shape and size all as shown on drg, must be fixed with full threaded screw of appropriate size to Chair steel with Arms.

All as per item No 9.01 here-in-before but of size 485mmx605mm x30mm for chair without arms,

All as per item no 9.02 here-in-before but for back.

M&L for removal of old unsv MS strip and S&F 02 Nos New MS strip (Flat Iron ) shall be 3mm thick, 20mm wide and length 485mm for Chair without arms to be welded to the steel tube at the both ends to provide support to seat and back of chairs.

Hard Rubber Shoes 25mm dia (Best quality as approved) for bottom of the legs to Chair steel with arms and Chair steel without Arms

Preparation of old painted steel surface of the Chair steel with arms and chair steel w/o Arms by removing all dents filling with putty, grinding, rusting and shall be apply spray painting with 2 coat of black synthetic enamel paint of Make: Berger/ Shalimar/ Asian over a coat of steel primer complete, all as specified and directed by Engr-in-Charge.

CHAIR EASY STEEL CUSHIONED FD-121(M), FD-358/1009

S&F in replacement seat cushion 75mm thick 32 density covered with approved quality tapestry cloth of chair easy cushioned complete all as specified and directed by Engr-in-Charge.

S&F in replacement back cushion 50mm thick 32 density covered with approved quality tapestry cloth of chair easy complete all as specified and directed by Engr-in-Charge.

S&F in replacement bottom ply 6mm thick commercial face both side ISI marked of chair easy complete all as specified and diretcted by Engr-in-Charge.

S&F in replacement arms cushion covered with approved quality leatherised resine of chair easy complete all as specified and directed by Engr-in-Charge.

CHARPOY IP HARD TOP FD/MAP-II/01

M&L for removal of Unserviceable ply wood from charpoy IP hard top and supply and fixing with new 12 mm thick BWR Grade plywood as per IS-303 approved specification of size 1930mmx850mm to stiffner of Make: Archid Ply/ Century Ply/ Green ply with counter sunk nuts and bolts 6mm dia 35mm long , complete all as shown on drg and directed by Engr-in-Charge.

M&L for preparation of old painted steel surface of the charpoy IP hard top by removing all dents,grinding, rusting and filling with putty and apply spray painting to entire charpoy with 2 coats of black synthetic enamel paint of Make: Berger/ Shalimar/ Asian. Metal primer shall be applied wherever required, all as specified and directed by Engr-in-Charge.

CHARPOY IP BED HARD TOP FD/E6/MAP/08

M&L for removing old broken / unserviceable Prelaminated particle board of head board of Bed Hard and S&F new 18mm thick plywood of size 634mm x196mm BWR Grade as per IS-303 approved specification Make: Archid Ply/ century Ply/ Green Ply covered both side with laminate sheet of approved shade by Engr-in-Charge with 18mmx4mm thick teak wood beading all round the edges of ply complete. Rest all as specified and shown on drg and directed by Engr-in-Charge.

M&L for removing old broken / unserviceable Prelaminated particle board of foot board of Bed Hard and S&F new 18mm thick plywood of size 638mm x314mm BWR Grade as per IS-303 approved specification Make: Archid Ply/ century Ply/ Green Ply covered both side with laminate sheet approved shade by Engr-in-Charge with18mmx 4mm thick teakwood beading all round the edges of ply complete. Rest all as specified and shown on drg and directed by Engr-in-Charge.

M&L for removing old broken / unserviceable Ply top of Bed Hard steel and S&F new ply top of 12 mm thick of size 1974mmx850mm BWR Grade as per IS-303 approved specification of Make: Archid Ply/ Century Ply/ Green Ply with fixing in position all as shown on drg with suitable size screws & cup washers complete all as specified and shown on drg and directed by Engr-in-Charge.

M&L for preparation of old steel surface of bed hard by scraping /rusting /denting and applying 2 coats of synthetic enamel paint of colour black in shade of Make: Berger/ Shalimar/ Nerolac/Asian with spary Gun machine complete as directed by Engr-in-Charge.

CHAIR COMPUTER FD/E6/MAP/01

M&L for removal of old unsv seat of Chair Computer in any position and S&F new seat of size 510mmx 470mmx 60mm made up of 12 mm thick ply wood BWR Grd Make: Century Ply / Archid / Green Ply, 60 mm thick, 32 density PU cushion of Make: Curl On, Sleep well/ Spring Well covered with tapestry cloth of Make: D'Decor/ vivid collection of approved shade by GE. Rest all as shown on drg and directed by Engr-in-Charge.

All as per item No 13.01 here-in-before but back of Chair computer.

M&L for removing old unserv Gas lifting assembly (fitted with bottom of the seat) and S&F new gas lift having chrome free cylinder tube shall be fixed in MS black powder coated outer central coloumn tube 38 mm dia and 2 mm thick.It shall have 100mm strock length and gas pressure of 300n force.Make : Nilkamal/GTB/MBTC

M&L for removing old unserv castor wheel and S&F new PVC twin wheel castor 50 mm (Load Capacity of 80 Kg to 100 Kg)Make : Nilkamal/GTB/MBTC

M & L for removal of old unserv pedestal assembly and supply & fixing of new pedestal assembly of injection moulded in black 30% glass filled nylon, 10.5mm dia forged bright zink plated MS castor pin is of press fitted into each prong for holding the castor (600mm pitch centre dia)as shown on drawing. Make: MBTC/ Generic/Nilkamal

M & L for removal of Handles and supply & fixing of new scrach proof and wheather resistant handle as shown in drawing and directed by Engr-in-Charge.Make DUCK/ Raj chairs.

M&L for Painting of all steel surfaces by coating black paint of Make: Berger/ Asian/ Shalimar after rusting/ grinding the steel surfaces of computer chair amd laminited part of polishing of chair computer.

TABLE BED SIDE FD/E6/MAP/15 (R)

Removing of old u/s top from Table bed side and S&F new top of of size 450mm x 450mm made out of 18mm thick Prelaminated Particle Board of Make : Archid Ply/ Green Ply/Century Ply with teak wood beading alround the top complete all as specified and shown in drg.

Removing of old u/s back from table bed side and S&F new back of size 450mm x 450mm made out of 6mm thick ply wood BWR Gde ISI marked of Make : Archid Ply/ Green Ply/Century Ply complete all as specified and shown in drg.

Removing of old u/s sides from table bed side and S&F new sidesof size 450mm x 450mm made out of 18mm thick Prelaminated Particle Board of Make : Archid Ply/ Green Ply/Century Ply complete all as specified and shown in drg.

Removing old unsv/ broken handle from drawers and S/F new 50-60mm long stainless steel handle of Make: Kaff/ hettich (Hettich 1161167)/ Godrej as per sample approved by Engr-in-Charge/ GE complete all as specified & shown in drg and directed by Engr-in-Charge.

Removing old & u/s sides of drawers from Table bed side and S/F new sides of size 350mmx450mm of drawers made out of 12mm thick plywood BWR Gde ISI marked of Make:Archid Ply/ Green Ply/Century Ply. All as specified & shown in drg and directed by Engr-in-Charge.

ditto all as per item sl No 14.05 here in before but for back of drawers duly screwed.

Removing old & u/s bottom of drawers from Table bed side and S/F new bottom of drawers of 450mm x414mmsize made out of 6mm thick plywood BWR Gde ISI marked of Make:Archid Ply/ Green Ply/Century Ply. All as specified & shown in drg and directed by Engr-in-Charge.

Removing old & u/s front door Particle board of upper drawers from Table bed side and S/F new front door of upper drawer of size 414mmx 100mm made out of 18mm thick Prelaminated Particle Board of Make:Archid Ply/ Green Ply/Century Ply with teak wood beading alround the board duly screwed with 02 L shaped stainless steel flat angle strip of size 25mmx25mmx 2mm ; 50mm long. All as specified & shown in drg and directed by Engr-in-Charge.

ditto all as per item sl No 14.08 here in before but for front door of lower drawer of size 350mmx414mm.

M&L for Preparation of old painted steel surface of the Table Bed Side by removing all dents filling with putty and spray painting with 2 coats of Black synthetic enamel paint of Make: Berger/ Asian/ Shalimar paints complete, all as specified in drg and directed by Engr-in-Charge

TEAPOY VERANDAH FD-208/255/383, FD/E6/MAP/17

Removal of unsv / broken Top of the table and S&F New top of size 900mm x450mm made up of 18mm thick plywood BWR Gde of Make : Archid Ply/ Green Ply/ Century ply and laminate sheet of approved shade of Make: Archid Ply/Kit Ply/ century ply with 4mm with teak wood beadding with semi round shape all round the top of table.

M&L for Spot welding to broken steel parts of Teapoy Verandah.

Removing existing unserviceble rubber shoes and replace with 25mm dia hard rubber shoe for legs of make: AMK/polyton as approved by Engr-in-Charge.

M&L for Preparation of old painted steel surface of the Teapoy Verandah by removing all dents filling with putty and spray painting with 2 coats of white synthetic enamel paint of Make: Berger/ Asian/ Shalimar paints complete, all as specified and directed by Engr-in-Charge

CHAIR SCHOOL WITH HAND BOARD FD/E6/MAP/05

Removal of unsv / broken Top of the chair with iron streep fix and S&F New top of size 585mmx 300mm made up of 18mm thick plywood BWR Gde of Make : Archid Ply/ Green Ply/ Century ply and laminate sheet of approved shade of Make: Archid Ply/Kit Ply/ century ply with 4mm with teak wood bidding with semi round shape all round the top of table.

Removal of unsv / broken seat&back of the chair and S&F New one piece PVC seat & back as shown on drg of make: MBTC

Removing existing unserviceble rubber shoes and replace with new 25mm dia hard rubber shoe for legs of make: AMK/polyton as approved by Engr-in-Charge.

M&L for Preparation of old painted steel surface of the chair school with hand board by removing all dents filling with putty and spray painting with 2 coats of white synthetic enamel paint of Make: Berger/ Asian/ Shalimar paints complete, all as specified and directed by Engr-in-Charge.

CHAIR WRITING MAP FD/E6/MAP/12

M&L for removing of old unsv seat and S&F new seat of size 500mmx500mm made up of 100mm thick PU foam 32 density of make: sleep well / curl on /sring well covered with tapestry cloth of make: Decor/ bombay deying/ vivid collection of approved shade completely upholsted as shown on drg.

M&L for removing of old unsv back and S&F new back of size 500mmx500mm made up of 100mm thick PU foam 32 density of make: sleep well / curl on /sring well covered with tapestry cloth of make: Ddecor/ bombay deying/ vivid collection of approved shade completely upholsted as showen on drg.

M&L for removing of old unsv handle and S&F new handle of hight 230mm preferably as shown on drg of Make: Duck / Raj chairs/KF interiors

M&L for Preparation of old painted steel surface of the chair writing and spray painting with 2 coats of black synthetic enamel paint of Make: Berger/ Asian/ Shalimar paints complete, all as specified and directed by Engr-in-Charge.

TABLE COMPUTER FD/E6/MAP/03

Removing of unserviceable top and supply and fixing new top of size 560mm x 900mm shall be made up of 18mm thick ply wood BWR Gde of Make : Century ply/ Green ply/ Archid Ply with both side laminated with laminate sheet of Make: Century ply/ Green ply/ Archid Ply of approved colour /Shade as directed by GE/Engr-in-Charge with polished 4 mm thick teak wood beading all round the top.

All as per item No. 18.01 here-in-before but unsrv key board tray. Supply and fixing new key board tray of size 450mmx425mm shall be fixed on 14-18 inch telescopic channel . Telescopic channels of Make : Hettich/ Kaff shall be provided.

All as per item No 18.01 here-in-before but side panels of size150mm x 657mm.

All as per item No 18.01 here-in-before but Bottom shelf of size300mm x 700mm.

All as per item No 18.01 here-in-before but middle shelf of size300mm x 450mm.

M&L for removal of old broken Telescopic channels of drawer and S&F new one of 14-18 inch Make : Hettich/ Kaff shall be provided.Rest all as shown in drg.

Removing unserviceable lock of drawer and supply and fixing new lock suitable for drawer with duplicate key of Make: Mortice/Harrison/ Link all as shown on drawing and directed by Engr-in-Charge.

M&L for Painting of all steel surfaces by coating black paint of Make: Berger/ Asian/ Shalimar after rusting/ grinding the steel surfaces of computer table.

M & L for removal of Nylon buffers and supply & fixing of new buffers of 35mm dia to legs as specified in drawing.

TABLE DINING 6 PERS FD-239/273/376

Removing old unserviceable Top of Table Dining 6 Pers and S&F new top complete of size 1500mm(L) x 900mm (W) suitable for table dining 6 pers shall be made of 18mm thick plywood of Make : Archid Ply/ Green Ply/Century covered with laminate sheet of approved shade of Make: Archid Ply/Century ply/ Green Ply with 4mm thick teakwood bidding of semi round shape all round the top of table. Complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable top long rail of Table Dining 6 Pers and S&F well seasoned teak wood new long rail of size 25mmx100mm1500mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable top short rail of Table Dining 6 Pers and S&F well seasoned teak wood new short rail of size 25mmx100mmx900mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable legs of Table Dining 6 Pers and S&F well seasoned teak wood new leg of size 75mmx40mmx760mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable wooden brackets of Table Dining 6 Pers and S&F new well seasoned teak wood brackets of size 50mmx50mmx25mm complete all as specified and shown on drg and directed by Engr-in-Charge.

M&L for 2 coats of French polish over a coat of wood primer to new part and 01 coat of melamine polish of approved shade to entire wood surface complete to Table Dining 6/8 Pers complete all as specified and directed by Engr-in-Charge. Make : Asian/ Berger/ Nerolac.

TABLE WRITING FD-249/251

Removing old unserviceable top of Table Writing and S&F new Top of size1145mmx600mm made of 18mmthick plywood BWR Gde of Make: century Ply/ Green Ply/ Archid Ply covered with laminate sheet of approved shade incl teak wood beading of semi round shape of 4mm thick shall be fixed alround the top complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable Leg of Table Writing and S&F new leg of size 55mmx35mmx760mm of well seasoned teak wood all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable Top rail long of Table Writing and S&F new rail of size 25mmx50mmx1145 of well seasoned teak wood complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable Top rail small of Table Writing and S&F new rail of size 25mmx50mmx600mmof well seasoned teak wood complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old & u/s sides, back of drawer from table writing and S/F new sides, bottom, back of drawers of existing shape,size made out of 12mm thick plywood BWR Gde ISI marked of Make:Archid Ply/ Green Ply/Century Ply. All as specified & shown in drg and directed by Engr-in-Charge.

Removing old & u/s front of drawer from table writing and S/F new front of drawer made out of 18mm thick plywood BWR Gde ISI marked of Make :Archid Ply/ Green Ply/Century Ply of existing shape,size. All as specified & shown in drg and directed by Engr-in-Charge.

Removing old & u/s bottom of drawers from Table writing and S/F new bottom of drawers of existing shape,size made out of 6mm thick plywood BWR Gde ISI marked of Make: Archid Ply/ Green Ply/Century Ply. All as specified & shown in drg and directed by Engr-in-Charge.

Removing old unserviceable Stiffner Long of Table Writing and S&F new well seasoned teak wood Stiffner Long of size 25mmx50mmx1145mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable Stiffner small of Table Writing and S&F new well seasoned teak wood Stiffner small of size 600mmx25mmx50mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Taking down old & u/s door shutter from table writing and S&F new door shutters of size 400mmx400mm all as per drg made out of 18mm thick plywood BWR Gde of Make : Archid Ply/ Green Ply/Century Ply including fixing of flat teakwood beading all around the shutter of existing shape,size complete all as specified & shown in drg and directed by Engr-in-Charge.

Removing old unsv/ broken handle from door shutter and drawers and S/F new stainless steel handle of 100- 125mm long handle of make: Kaff/Hettich (Model 91057247 vermessingt) /Godrej for shutters and knobs for drawers of make: Kaff/Hettich(model 9197000, 45mm dia)/Godrej as per sample approved by Engr-in-Charge/ GE complete all as specified & shown in drg and directed by Engr-in-Charge.

Removing old unsv/ broken hinges from shutter and S/F new piano type continuous hinges of size400mm long & 20-25mm wide of Make: Hettich/ Kaff/Godrej for Door shutter complete all as specified & shown in drg and directed by Engr-in-Charge.

M&L for 02 coats of French polishing of approved shade to entire surface of table writing complete all as specified and directed by Engr-in-Charge.

SIDE BOARD FD-241/372

Removing of old u/s top from side board and S&F new top of size 1220mm x455mm made out of 18mm thick plywood BWR Gde of Make : Archid Ply/ Green Ply/Century Ply complete all as specified and shown in drg.

Taking down old & u/s door shutters from side board and S&F new door shutters of size 635mmx417mm made out of 18mm thick plywood BWR Gde of Make : Archid Ply/ Green Ply/Century Ply complete including fixing of flat teakwood beading all around the shutter complete all as specified & shown in drg and directed by Engr-in-Charge.

Removing old unsv/ broken handle / knobs from door shutter and drawers and S/F new 100-125mm long handle of make: Kaff/Hettich (Model 91057247 vermessingt) / Godrej for shutters and knobs for drawers of make: Kaff/ Hettich (model 9197000, 45mm dia)/Godrej as per sample approved by Engr-in-Charge/ GE complete all as specified & shown in drg and directed by Engr-in-Charge.

Remove old unsv plywood back from side board & S/F new back of 6mm thick plywood BWR Gde of size 1220mm x 635mm of Make:Archid Ply/ Green Ply/Century Ply. Rest all as specified and shown on drg.

Removing old & u/s legs from side board and S/F new legs of existing shape,size made out of well seasond teakwood all as specified & shown in drg and directed by Engr-in-Charge.

Removing old unsv/ broken hinges from shutter and S/F new piano type continuous hinges of size 20-25mm of Make: Hettich/ Kaff/Godrej for both Door shutter complete all as specified & shown in drg and directed by Engr-in-Charge.

All entire side board shall be done 02 coats of French polish of approved shade as directed by Engr-in-Charge.

TABLE PEG FD 236/277/384/374

Removing old unserviceable Top of Table Peg and S&F new top complete of size 300mmx450mm made of 18mm thick plywood of Make : Archid Ply/ Green Ply/ Century covered with laminate sheet of approved shade of Make: Archid Ply/ Century with 4mm thick teakwood beading of semi round shape all round the top of table complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable top long rail of Table Peg and S&F well seasoned teak wood new long rail of size 20mmx40mmx450mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable top short rail of Table Peg and S&F well seasoned teak wood new short rail of size 20mmx40mmx300mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable leg of Table Peg and S&F well seasoned teak wood new leg of size 30mmx50mmx380mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable bottom rail of Table peg and S&F well seasoned teak wood new bottom rail of size 20mmx40mmx300mm complete all as specified and shown on drg and directed by Engr-in-Charge.

S & F new teak wood Bracket of size 75mm x 75mm x 25mm for Table peg complete all as show on drg and as directed by Engr-in-Charge.

M&L for 2 coats of French polish over a coat of wood primer to new part and 01 coat of french polish of approved shade to entire surface complete to Table Peg complete all as specified and directed by Engr-in-Charge Make : Asian/ Berger / Nerolac.

TABLE DRESSING GENTS FD/E6/MAP/15/16

Removing old unserviceable Looking mirror of Table Dressing Gents and S&F new 5.5mm thick Looking mirror of size 1200mmx600mm complete all as specified and shown on drg and directed by Engr-in-Charge. Make of mirrror: Modi Guard /swastik/ Saint Gobin.

Removing old unserviceable wood frame covered to mirror of Table Dressing Gents and S&F new teak wood frame of size 50mmx28mm alround the mirror complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable glass shelf of Table Dressing Gents and S&F new 5.5mm thick glass shelf of size 600mmx100mm complete all as specified and shown on drg and directed by Engr-in-Charge. Make of mirrror: Modi Guard /swastik/ Saint Gobin.

Removing old unserviceable ply back of Table Dressing Gents and S&F new ply back of size 1200mmx600mm of 12mm thick plywood complete all as specified and shown on drg and directed by Engr-in-Charge. Make of Ply : ArchidPly/ Green Ply/ Century Ply

Removing old unserviceable sides of Table Dressing Gents and S&F new sides of size 1200mmx100mm made out of 18mm prelaminated particle board complete all as specified and shown on drg and directed by Engr-in-Charge. Make of Ply : ArchidPly/ Green Ply/ Century Ply

Removing old unserviceable wooden brackets of Table Dressing Gents and S&F new teak wood brackets of size 38mmx112mmx112mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable hinges of Table Dressing Gents and S&F new piano type continuous hinges of size 25mm wide complete all as specified and shown on drg and directed by Engr-in-Charge.

TABLE DRESSING LADIES FD/MAP-II/07

Removing old unserviceable SIDES of base unit of Table dressing ladies and S&F new side of size 500mmx380mm made out of 18mm thick prelaminated MDF board of approved shade ISI marked of Make : Archid ply/ Green Ply/ century Ply complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable BOTTOM of base unit of Table dressing ladies and S&F new bottom of size 350mmx380mm made out of 12mm thick plywood BWR Gde ISI marked of Make : Archid ply/ Green Ply/ century Ply complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable front of drawers of base unit of Table dressing ladies and S&F new one of size 350mmx100mm made out of 18mm thick prelaminated MDF board of approved shade ISI marked of Make :Archid ply/ Green Ply/century Ply complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable sides of drawers of base unit of Table dressing ladies and S&F new one of size 100mmx 380mm made out of 12mm thick prelaminated MDF board of approved shade ISI marked of Make : Archid ply/ Green Ply/ century Ply complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable back of drawers of base unit of Table dressing ladies and S&F new one of size 100mmx 380mm made out of 12mm thick prelaminated MDF board of approved shade ISI marked of Make : Archid ply/ Green Ply/ century Ply complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable bottom of drawers of base unit of Table dressing ladies and S&F new one of size 380mmx350mm made out of 6mm thick plywood ISI marked of Make : Archid ply/ Green Ply/ century Ply complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable telescopic channel of drawers of base unit of Table dressing ladies and S&F new one of size 12" wide of Make : Hettich/Kaff/Godrej complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable handles of drawers of base unit of Table dressing ladies and S&F new knobs of make: Kaff/Hettich(model 9197000, 45mm dia)/Godrej complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable handles of door panel of base unit of Table dressing ladies and S&F new knobs of make: Kaff/Hettich(model 9197000, 45mm dia)/Godrej complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable magnetic catcher of door panel of base unit of Table dressing ladies and S&F new one of size 4cmx3cmx1.5cm of Make Nixnine/ ZAKS Steel/IPSA/DEEZ as per sample approved by Engr-in-Charge/GE complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable hinges of door panel of base unit of Table dressing ladies and S&F new stainless steel piano type continuous hinges of 20-25mm width of Make: Hettich/ Kaff/Godrej all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable/broken Looking mirror of Table Dressing Ladies and S&F new Looking mirror of 5mm thickness of size 1250mmx450mm complete all as specified and shown on drg and directed by Engr-in-Charge. Make of mirrror: Modi Guard /swastik/ Saint Gobin.

Removing old unserviceable back of mirror of Table dressing ladies and S&F new back of size 1250mmx450mm made out of 6mm thick marine ply ISI marked of Make : Archid ply/ Green Ply/ century Ply complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable foam cusion of stool of Table dressing ladies and S&F new one of size 350mmx440mm made out of 75mm thick foam ISI marked of Make : Curl on/ sleepwell/ springwell covered with tapestry cloth of Make: D'Decor / Vivid collection/ bombay dying of approved shade /colour by Engg-in/Charge/GE over cora cloth of best quality duly stitched complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable Nylon castor wheel of stool of Table dressing ladies and S&F new 50mm dia pvc twin castor wheel complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable beading of Table dressing ladies and S&F new teakwood beading of existing size, shape to table dressing ladies complete all as specified and shown on drg and directed by Engr-in-Charge.

TABLE CENTRE FD-274/235

Removing old unserviceable Top of Table Centre and S&F new top of size 900mmx450mm made of 18mm thick plywood BWR Gde of Make : Archid Ply/ Green Ply/Century covered with laminated sheet of approved shade of Make: Archid Ply/Century with 4mm thick teakwood beading of semi round shape all round the top of table complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable top long rail of Table Centre and S&F well seasoned teak wood new long rail of size 20mmx50mmx900mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable top short rail of Table Centre and S&F well seasoned teak wood new short rail of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable legs of Table Centre and S&F well seasoned teak wood new leg of size 60mmx30mmx400mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable bottom rail of Table centre and S&F well seasoned teak wood new bottom rail of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable stiffner of Table centre and S&F well seasoned teak wood new stiffner of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engr-in-Charge.

S & F new teak wood Bracket of size 75mm x 75mm x 25mm for Table dining complete all as show on drg and as directed be Engr-in-Charge.

M&L for 2 coats of French polish over a coat of wood primer to new part and 01 coat of french polish of approved shade to entire surface complete to Table Centre complete all as specified and directed by Engr-in-Charge Make : Asian /Berger / Nerolac.

TEAPOY FD-274/382/232

Removing old unserviceable Top of Teapoy and S&F new top complete of size600mmx450mm made of 18mm thick plywood of Make : Archid Ply/Green Ply/Century covered with laminate sheet of approved shade of Make: Archid Ply/Century with 4mm thick teakwood beading of semi round shape all round the top of table complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable top long rail of Teapoy and S&F well seasoned teak wood new long rail of size 20mmx50mmx600mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable top short rail of Teapoy and S&F well seasoned teak wood new short rail of size 20mmx45mmx450mm complete all as specified and show on drg and directed by Engr-in-Charge.

Removing old unserviceable legs of Teapoy and S&F well seasoned teak wood new leg of size 60mmx30mm540mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable bottom rail of Teapoy and S&F well seasoned teak wood new bottom rail of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engr-in-Charge.

S & F new teak wood Bracket of size 75mm x 75mm x 25mm for Teapoy complete all as show on drg and as directed be Engr-in-Charge.

M&L for 2 coats of French polish over a coat of wood primer to new part and 01 coat of french polish of approved shade to entire surface complete to Teapoy complete all as specified and directed by Engr-in-Charge Make : Asian /Berger / Nerolac.

TABLE 900X600MM (3'X2') W/ WITH/O DRAWER FD 231/284

Removing old unserviceable Top of Table 3'x2' with & without drawer and S&F new top of size 900mmx600 made up of 18mm thick ply wood BWR Gde of Make : Archid Ply/ Green Ply/Century covered with laminate sheet of approved shade of Make: Archid Ply/Centuryply/ Green ply with 4mm thick teakwood beading of semi round shape all round the top of table complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable top long rail of Table 3'x2' without drawer and S&F new well seasoned teak wood top long rail of size 20mmx60mmx900mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable top long rail of Table 3'x2' with drawer and S&F new well seasoned teak wood top long rail of size 20mmx110mmx900mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable top short rail of Table 3'x2' without drawer and S&F well seasoned teak wood new short rail of size 20mmx60mmx600mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable top short rail of Table 3'x2' with drawer and S&F well seasoned teak wood new short rail of size 20mmx110mmx600mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable legs of Table 3'x2' without drawer and S&F well seasoned teak wood top new leg of size 60mmx30mmx760mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable legs of Table 3'x2' with drawer and S&F well seasoned teak wood top new leg of size 60mmx30mmx760mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable bottom rail of Table 3'x2' without drawer and S&F well seasoned teak wood new bottom rail of size 20mmx60mmx600mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable bottom rail of Table 3'x2' with drawer and S&F well seasoned teak wood new bottom rail of size 20mmx60mmx600mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable stiffner of Table 3'x2' and S&F well seasoned teak wood new stiffner of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable drawer of Table 3'x2' with drawer and S&F new drawer made up of of plywood BWR Gde of size 300mmx600mmx110mm incl repair to sliding rails complete all as specified and shown on drg and directed by Engr-in-Charge. Make of plywood : Archid Ply/ Green Ply/Century Ply

Removing old unserviceable knobs of Table 3'x2' with / without drawer and S&F new knobs of make: Kaff/Hettich(model 9197000, 45mm dia)/Godrej as per sample approved complete all as specified and shown on drg and directed by Engr-in-Charge.

S & F new teak wood Bracket of size 75mm x 75mm x 25mm for Table 3'x2' complete all as show on drg and as directed by Engr-in-Charge.

M&L for 2 coats of French polish to new part and 01 coat of melamine polish of approved shade to entire wood surface complete to Table 3'x2' with & without drawer complete all as shown on drg and directed by Engr-in-Charge. Make : Asian/ Berger / Nerolac.

SOFA SET 4 SEATER WITH CUSHION FD-281/373/258

M&L for removing old broken / unserviceable front legs of sofa single seat and S&F new Front legs of size 530mmx70mmx35mm all as shown on drg.

M&L for removing old broken / unserviceable rear legs of sofa single seat and S&F new rear legs of size 530mmx70mmx35mm all as shown on drg. and as directed .

M&L for removing old broken / unserviceable arms of sofa single seat and S&F new arms of size 725mmx35mmx70mm all as shown on drg. and as directed .

M&L for removing old broken / unserviceable front rail of sofa single seat and S&F new front rail of size 530mmx35mmx100mm all as shown on drg. and as directed .

M&L for removing old broken / unserviceable wooden frame for back of sofa single seat and S&F new frame of size 35mmx70mm all as shown on drg. and as directed

M&L for removing old broken / unserviceable battons of sofa single seat and S&F new battons of size 560mmx20mmx50mm all as shown on drg. and as directed .

M&L for removing old broken / unserviceable PVC shoe of sofa single seat and S&F new PVC shoe of best quality all as shown on drg. and as directed .

M&L for removing old broken / unserviceable ply of sofa single seat and S&F new plywood 8mm thick Make : Green ply/ Archid /century ply of size 560mmx530mm all as shown on drg. and as directed .

M/L for application of two coats of French polish to the whole furniture surface complete all as directed as per drg

M&L for Removal of old existing unsv foam cusion with tapestry cover of seat & back of sofa set 4 seater(set of 4 single seats each) and S/F 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 530mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor/Vivid Collection of approved shade by Engr-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided.

SOFA SET 5 SEATER FD-373 Removal of following existing unserviceable components of furniture items as described below carefully without disturbing adjoining parts & S&F new teak wood components incl tightening the joints, pinning,screwing , nailing, glueing,placing every part as shown on Drg & M/L for two coats of Melamine/french polish to the whole furniture surface complete all as directed.

M&L for removing unserviceable/old broken front legs of sofa single and three seater and S&F new Front legs of size 530mmx70mmx35mm all as shown on drg. and as directed .

M&L for removing unserviceable/old broken rear legs of sofa single and three seater and S&F new rear legs of size 530mmx70mmx35mm all as shown on drg and as directed .

M&L for removing old broken / unserviceable arms of sofa single and three seater and S&F new arms of size 725mmx35mmx70mm all as shown on drg. and as directed .

M&L for removing old broken / unserviceable front rail of sofa single seater and S&F new front rail of size 530mmx35mmx100mm all as shown on drg and as directed .

M&L for removing old broken / unserviceable front rail of sofa three seater and S&F new front rail of size 1590mmx35mmx100mm all as shown on drg. and as directed .

M&L for removing old broken / unserviceable wooden frame for back of sofa three seater and S&F new frame of size 35mmx70mm all as shown on drg and as directed .

M&L for removing old broken / unserviceable battons of sofa single/three seater and S&F new battons of size 560mmx20mmx50mm all as shown on drg. and as directed .

M&L for removing old broken / unserviceable PVC shoe of sofa single/three seater and S&F new PVC shoe of best quality all as shown on drg. and as directed .

M&L for removing old broken / unserviceable ply of sofa single seater and S&F new plywood 8mm thick Make : Green ply/ Archid /century ply of size 560mmx530mm all as shown on drg. and as directed .

M&L for removing old broken / unserviceable ply of sofa three seater and S&F new plywood 8 mm thick Make : Green ply/ Archid /century ply of size 560mmx1590mm all as shown on drg. and as directed .

M&L for Removal of old existing unsv foam cusion with tapestry cover of seat & back of sofa set 5 seater and S/F 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 530mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection of approved shade by Engr-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided.

M/L for application of two coats of French polish to the whole furniture surface complete all as directed.

CHAIR DINING FD/MAP-II/05 M&L for removal of old unsv wooden part of following furniture articles and S&F New seasoned teak wood part with exact dimensions as specified and shown on drgs and directed by Engr-in-Charge.

M&L for removal of old broken /unsv rear leg of chair dining, S&F new rear leg of size 890mmx30mmx55mm made of well seasoned hard wood (teak wood) all as shown on drg, specified and as directed by the Engr-in-Charge.

All as 30.01 above but new front leg of size 460mmx55mm x 30mm.

All as 30.01 above but new side rail of size 430x30x65mm.

All as 30.01 above but new front rail of size 440mmx30mm x65mm.

All as 30.01 above but new back rail of size 405mmx30mm x65mm.

All as 30.01 above but new stiffner of size 440mmx20mmx25mm

All as 30.01 above but new back strip wooden of size 405mm long x 45mmx15mm(out of 45mmx35mm)

M&L for Removal of old broken / unsv existing PVC seat and S&F new one having 4x10mm thick ribs moulded along with seat in single piece with 4mm seat thick with holes & screwed. Make : Amco/Comfo/Swastik

S & F new hard PVC ring of superior quality with 1/2" screws to legs of chair dining complete all as shown on drg and as directed by Engr-in-Charge.

M & L for preparation of old surfaces by complete removal of existing treatment using grinding machine including filling of cavities by putty,filler,sealer and applying two coats of melamine polishing using spray machine to obtain glossy finish complete all as specified and as directed by Engr-in-Charge.

TABLE DINING 4 PERS FD-273

Removing old unserviceable Top of Table Dining 4 pers and S&F new top complete of size 1200mmx900mm made of 18mm thick plywood BWR Gde of Make : Archid Ply/ Green Ply/Centurycovered with laminate sheet of approved shade of Make: Archid Ply/Century with 4mm thick teakwood bidding of semi round shape all round the top of table. Complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable long rail ofTable Dining 4 pers and S&F well seasoned teak wood new long rail of size 45mmx90mmx1200mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable short rail of Table Dining 4 pers and S&F well seasoned teak wood new short rail of size 45mmx90mmx900mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable legs of Table Dining 4 pers and S&F well seasoned teak wood new leg of size 90mmx45mmx750mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable PVC rings of Table Dining 4 pers' and S&F new PVC rings of size 25mm dia best quality fixed with screw complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable wooden brackets of Table Dining 4 pers and S&F well seasoned teak wood new brackets of 100mmx100mmx35mm complete all as specified and shown on drg and directed by Engr-in-Charge.

Removing old unserviceable wooden stiffner of Table Dining 4 pers and S&F well seasoned teak wood new stiffner of 90mmx25mmx900mm complete all as specified and shown on drg and directed by Engr-in-Charge.

M&L for 2 coats of French polish over a coat of wood primer to new part and 01 coat of french polish of approved shade to entire surface complete to Table Dining 3'x3' complete all as specified and directed by Engr-in-Charge Make : Asian /Berger / Nerolac.

HAT STAND

M&L for removal of existing damaged teak wood edging on all sides of Hat Stand & replacing the same with new 1st class hard wood (Teak) edging 6mm thick 35mm wide 1000mm long and 710mm high on both sides ,all exposed surfaces french polished and fixed with nails all as shown in drg and as specified and directed.FD -233

M&L for removal of existing broken / foggy mirror of Hat stand & replacing the same with new mirror (Make - Modi guard/Prayag/Trupti) not less than 5.0 mm thick and of size 300 x400 mm and fixed complete all as shown in drg and as specified and directed.FD -233

M&L for removing existing damaged plywood of Hat stand and replacing the same on the front face with new 4mm thick one side teak veneered (OST) plywood (Make -Kit ply/Century/Indian plywood(Anchor) except on the mirror portion and refixing the existing / retrieved peg hooks and french polishing the teak veneeered surfaces complete all as shown on drg and specified.FD-233

M&L for fixing Hat stand on wall at site duly drilling holes with drilling machine and fixing with 45x8 mm MS screw over PVC plug all as per direction of Engr in charge

M&L for removal of existing damaged peg hooks of Hat Stand and replacing each peg with new anodised aluminium peg hooks of 120mm long, 40mm base, fixed to the 4mm thick plywood (Make-Kit ply/Century/Indian Plywood (Anchor)face with a pair of screws all as shown in drg and as specified. FD-233

CANING OF CHAIR DINGING,CHAIR WRITING,CHAIR EASSY

M & L Canning chair dinning(FD-158) chair writing(FD-280/250), chair easy(FD-229) etc with new plastic cane of size 1.8x0.46mm and boarder with 3.0x0.60mm (2.61 Sqm/Chair) size cane as per Godrej Pattern including taking out old/damaged plastic cane from the aforesaid furnitures and cleaning the entire surface of furniture complete all as specified and directed by Engr-in-Charge.

Schedule of Credit (Minus) Rs.33793.00 NOTE: Bidder shall insert credit amount of Rs. 33793.00 as rate in Green field under Col-13.

Bell Builders (BID ID -3262389)

shekhar & company (BID ID -3261683)

MISHON TRADING CORPORATION (BID ID -3256550)

Mahesh Traders (BID ID -3255991)