Location) Technical Specifications As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) Generic Type of Desking and Seating Desk and Bench (Integrated), Desk and Bench (Separate) Suitable for Age Group (in years) 3 TO 4, 4 TO 6, 6 TO 9, 9 TO 12, 12+ Number of Seating Capacity 1 Seater, 2 Seater, 3 Seater, 4 Seater Desk Frame Material of Desk Particle Board, MDF Board, Marine Ply, BWP Ply, MR (Moisture Resistant) Ply, Mild Steel Material of Top of desk Particle Board, Mild Steel, Compact Laminate (HPL) Desk with shelf (under storage) Yes, No Modesty Panel in Desk Availability of modesty panel Yes, No Modesty Panel Type Half, Full, Quarter, NA(Without Modesty Panel) Material of Modesty Panel NA(Without Modesty Panel), Particle Board, Acrylic, Compact Laminate (HPL) Thickness of Modesty Panel (in mm) NA(Without Modesty Panel), 0.8, 1.0, 1.2, 1.6, 2.0, 10, 12, 15, 18, 25, 6, 8 Seating Bench Frame Material of Seating Bench Particle Board, Mild Steel 7/13 Seating Material of Bench Top Particle Board, Compact Laminate (HPL) Bench Backrest Bench Backrest Provided Yes, No Material of Bench Backrest NA(Without Backrest), Compact Laminate (HPL) Seating Armrest Armrest Provided in Chair/Bench Yes, No Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - Desk And Bench Set For Classroom/Training Area ( 65 set ) Specification Parameter Name Bid Requirement (Allowed Values) MINIMUM SPECIFICATIONS FOR 3 SEATER DESK (CLASS 6-8): Part-1 3 Seater joint-desk & bench set. Desk size : 48”(W) X 18”(D) X 30”(H) Shelf Size : 48”(W) X 9”(D) Covered with perforated sheet. Bench Size : 48”(W) X 15”(D)X 18”(H) Bench Back : 48”(W) X 8”(D) X 32”(H). For strength, Metal Inset Gas (MIG) welding of 25 mm CRCA (Cold Rolled Closed Annealed) pipe and 0.6 mm sheet which is electric resistant bolted and of Indian Standard Grade 4030 quality. Part-2 The top of the bench should be of 18 mm Wood base BSL and on it 80-90 gsm thickness pre-laminated paper should be applied. 25 mm circular and square pipe for support between desk and bench 50mm x 25mm frame and desk, whose thickness should be 16 gauge. The quality certificate of all the above materials (metal material) should be of Indian Standard 7138. The plastic should be of PP-polymer (Grade 3530). Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity .... S.N o. Consignee Reporting/Officer Address Quantity Delivery Days 1 0 0 0 0249001CHAMBA
