Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹50.1 LAccepted-AOC NO 622 VANNIYAR NAGAR ALAGAPURAM PERIYAPUDHUR SALEM 636016 | SALEM | SALEM | TAMIL NADU | 636016 | ₹50.1 L Quoted ₹51.8 L | L1 | Accepted-AOC The rates quoted are accepted in this office |
| 2 | L2₹53.5 LRejected-Finance 7 3 PUDUMARAPPANUR ARIYUR POST NAMAKKAL 637 015 TAMIL NADU | NAMAKKAL | TAMIL NADU | 637015 | ₹53.5 L | L2 | Rejected-Finance The Rates quoted are high |
| Sl No | Description | Qty | Unit | SS Associates L1 | SRI NAACHIMAAR ENGINEERING CONSTRUCTIONS L2 |
|---|---|---|---|---|---|
| 1.00 | Dismantling, clearing away and carefully stacking materials useful for re-use of Asbestos sheet roofing, stacking inside the campus as directed by the Engineer - Incharge. | 2,414 | M2 | 20 ₹48,280 | 20 ₹48,280 |
| 2.00 | Repairs and servicing the manually operated Rolling shutter of size 1.80 x 2.44m and replacing the Existing worn out spares like M.S tension spring, small lathe, empty pully and double ball bearing, locking arrangements and also servising the gear box and shutter for smootheing function and pull operation etc., including cost of replacing materials labour charges etc complete complying with standard specification. | 8 | Nos. | 2,610 ₹20,880 | 2,700 ₹21,600 |
| 3.00 | Clean removal of Cement plaster from walls and clearing away and depositing the debris in the low lying areas inside the campus as directed by the Engineer-incharge. | 372 | M2 | 10 ₹3,720 | 10 ₹3,720 |
| 4.00 | Repairs, Servicing and Replacing the existing damaged GI weldmesh with new of size 7.50 x 2.50cm of 10 gauge for Fixed Swing Ventilator to avoid the entry of Brids, the weld mesh should be fixed withTeak wood reepers of size 50mm x 25mm for required length alround the FSV and the Rate is inclusive cost of materials and all labour charges for removing the Existing warnout wiremeshes etc., complete Complying with Standard Specification. | 51.12 | M2 | 1,570 ₹80,258.40 | 1,620 ₹82,814.40 |
| 5.00 | Repairs, Servicing and Replacing the existing damaged GI weldmesh with new of size 7.50 x 2.50cm of 10 gauge for Air Inlet Window to avoid the entry of Brids, the weld mesh should be fixed withTeak wood reepers of size 50mm x 25mm for required length alround the AIW and the Rate is inclusive cost of materials and all labour charges for removing the Existing warnout wiremeshes etc., complete Complying with Standard Specification. | 7.2 | M2 | 1,570 ₹11,304 | 1,620 ₹11,664 |
| 6.00Providing two legged scaffolding using 13-15cm dia casuarinas post of 4m over all length (3m length + 0.5m projection + 0.5m into the ground) the distance between two rows being 1.5m and the spacing of the post being 2.0m in both rows with two horizontal posts with 0.5m.Overlap on either side and braces at 2.0m center to center including longitudinal and transverse middle braces to step and providing platform with country wood planks of 40mm thick and 1m width etc., complete complying with standard specification. | |||||
| 6.10 | Upto 8.00m height | 12 | RM | 1,020 ₹12,240 | 1,050 ₹12,600 |
| 6.20 | 8.00m to 10.50m height | 12 | RM | 310 ₹3,720 | 310 ₹3,720 |
| 7.00 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. | 406 | M2 | 305 ₹1.2 L | 305 ₹1.2 L |
| 8.00 | Supplying, fabricating and fixing colour coated galvalume profile sheets (Make- TATA/JSW) with the depth of 30 mm and pitch of corrugation 200 mm (Colour and shape of profile as approved by the Engineer-in-charge), 0.47 mm(TCT) total coated thickness( tolerance as per relevant IS code), material yield strength 550 MPa, galvalume AZ-150 GSM (both side inclusive) with regular modified polyester paint and coating of 20-25 micron RMP on exposed surface including primer and 7-10 micron epoxy coating on unexposed surface including primer. The sheet should be supplied in single length as shown in drawing or as desired by Engineer in charge and shall be fixed using stainless steel Hex cap headed self drilling/ tapping stainless steel screws M6, 65 mm long with 3 mm thick EPDM seal and Stainless steel stitching screw of size 19X2.5 mm excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. All screw should be sealed with silicon sealant. (The contractor should take over the AC sheets on buy back policy). | 2,427 | M2 | 1,115 ₹27.1 L | 1,160 ₹28.2 L |
Tender Value
Refer Docs
EMD Value
₹35,000
Closing Date
9 Dec 2025, 5:00 pmClosed
Executive Engineer
TAMILNADU WAREHOUSING CORPORATION, NO. 82, ANNA SALAI, GUINDY, CHENNAI 600 032.
Special Repairs to Rolling shutters, ventilators, painting walls, wood, iron work and plastering walls and Providing Galvalume sheet roofing by replacing the existing old AC sheets in Godown No. 2 at Trichy Warehouse.
2025_TNWC_629019_1
Rc.No.4016-2/2025/C2
Open Tender
Construction Works
90 days
Trichy
As per Tender Document
6 documents required · 6 mandatory
₹0
₹35,000
26 Dec 2025
4 Dec 2025
10 Dec 2025
4 Dec 2025
9 Dec 2025
4 Dec 2025
4 Dec 2025 - 8 Dec 2025
Amount
Dismantling, clearing away and carefully stacking materials useful for re-use of Asbestos sheet roofing, stacking inside the campus as directed by the Engineer - Incharge.
Repairs and servicing the manually operated Rolling shutter of size 1.80 x 2.44m and replacing the Existing worn out spares like M.S tension spring, small lathe, empty pully and double ball bearing, locking arrangements and also servising the gear box and shutter for smootheing function and pull operation etc., including cost of replacing materials labour charges etc complete complying with standard specification.
Clean removal of Cement plaster from walls and clearing away and depositing the debris in the low lying areas inside the campus as directed by the Engineer-incharge.
Repairs, Servicing and Replacing the existing damaged GI weldmesh with new of size 7.50 x 2.50cm of 10 gauge for Fixed Swing Ventilator to avoid the entry of Brids, the weld mesh should be fixed withTeak wood reepers of size 50mm x 25mm for required length alround the FSV and the Rate is inclusive cost of materials and all labour charges for removing the Existing warnout wiremeshes etc., complete Complying with Standard Specification.
Repairs, Servicing and Replacing the existing damaged GI weldmesh with new of size 7.50 x 2.50cm of 10 gauge for Air Inlet Window to avoid the entry of Brids, the weld mesh should be fixed withTeak wood reepers of size 50mm x 25mm for required length alround the AIW and the Rate is inclusive cost of materials and all labour charges for removing the Existing warnout wiremeshes etc., complete Complying with Standard Specification.
Providing two legged scaffolding using 13-15cm dia casuarinas post of 4m over all length (3m length + 0.5m projection + 0.5m into the ground) the distance between two rows being 1.5m and the spacing of the post being 2.0m in both rows with two horizontal posts with 0.5m.Overlap on either side and braces at 2.0m center to center including longitudinal and transverse middle braces to step and providing platform with country wood planks of 40mm thick and 1m width etc., complete complying with standard specification.
Upto 8.00m height
8.00m to 10.50m height
Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.
Supplying, fabricating and fixing colour coated galvalume profile sheets (Make- TATA/JSW) with the depth of 30 mm and pitch of corrugation 200 mm (Colour and shape of profile as approved by the Engineer-in-charge), 0.47 mm(TCT) total coated thickness( tolerance as per relevant IS code), material yield strength 550 MPa, galvalume AZ-150 GSM (both side inclusive) with regular modified polyester paint and coating of 20-25 micron RMP on exposed surface including primer and 7-10 micron epoxy coating on unexposed surface including primer. The sheet should be supplied in single length as shown in drawing or as desired by Engineer in charge and shall be fixed using stainless steel Hex cap headed self drilling/ tapping stainless steel screws M6, 65 mm long with 3 mm thick EPDM seal and Stainless steel stitching screw of size 19X2.5 mm excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. All screw should be sealed with silicon sealant. (The contractor should take over the AC sheets on buy back policy).
Supplying and fixing corrugated Poly Carbonate Sheet of size 3.00m x1.06m of 6mm thick on the roof in-between the colour coated Galvolume sheets for proper lighting with necessary screws and EPDM rubber washers etc.., complete complying with standard specification and as directed and specified by the departmental officers including cost of loading, unloading and transportation charges etc., complete complying with standard specification.
Providing anchorage arrangements to the ridge sheet using M.S Flat of Size 40mm x 6mm including cost of Materials like MS Flat, self threaded screws with bushes and labour charges for cutting, drilling and fitting etc., complete complying with Standard Specifications.
Painting old iron works two coats such as steel doors, windows, steel grills, ventilators, window bars, balustrades etc., of best approved first quality and colour of synthetic enamel paint in all floors, etc., including removing old paint from iron surface with sand paper, complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Engineer incharge before use on works)
Painting old wood works with two coats of best quality synthetic enamel paint of approved quality and colour ( the colour and quality should be got approved by the Engineer incharge before use on works) the rates inclusive of removing of old paint from doors, windows and wood works by manual labour including cost of brushes, scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental officers during execution of work.
Painting two coats of New plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes of 160mm dia having a pressure of 4 kg. / sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the departmental officers
Sub total
GST in 18%
SRI NAACHIMAAR ENGINEERING CONSTRUCTIONS (BID ID -1530044)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_752190.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.22 MB
BOQ_752190.xls
BOQ • 0.29 MB
TRICHY_LSDOCUMENTS.pdf
Tender Documents • 0.92 MB
Download all tender documents and submit your bid