WBNUJS/NIT/Alu-Part/008 /2024-25

Aluminium Partition Work

Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge.

For unsupported length of vertical member above 1.50 m. height of both ends of vertical member restrained but panel above 0.90 sqm

Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door, spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-in- charge.

Door stopper (Anodised aluminium)

Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:

Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer- in -Charge.

Supplying 125 mm. Dia acrylic handle for aluminium door as per approved make & brand.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal /Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Dismantling carefully wooden walling, flooring of ceiling and stacking dismantled materials as directed.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With Additional Rate Rs. 4 / Sq. M. (as per PWD (WB), BUILDING WORKS, Volume - 1, Page No. 193, Item No. 1, Sub Item (ii))

Labour for Chipping of concrete surface before taking up Plastering work

Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department]

White washing including cleaning and smoothening surface thoroughly

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary

Removal of Steel racks fixed in the wall (for plastering, waterproofing and painting in all the five walls)

Fixing of Steel racks in the wall (after completion of painting work in in all the five walls)

Contingencies @3%

DREAM DECOR (BID ID -6181061)

ZEN Aluminium (BID ID -6182228)

M/S. SABIRIA ENTERPRISE (BID ID -6182098)

PERFECTION (BID ID -6177948)

FAVOURITE INTERNATIONAL (BID ID -6172005)

FAVOURITE INTERNATIONAL

DREAM DECOR

M/S. SABIRIA ENTERPRISE

ZEN Aluminium