REPAIR TO PLASTERING, FLOORING, TILING PLUMBING AND SANITARY FITTINGS TO OTM/OFFICES AND OTHER TECH BUILDINGS IN SUNDERBAN TECH AREA AT AF STN AMBALA

Amount

Taking up or down steel tubing and connections, for refixing or removal from site for 15mm bore pipe, complete all as specified and directed.

Taking up or down steel tubing and connections, for refixing or removal from site for 20mm bore pipe, complete all as specified and directed.

S&F, 15 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors complete as specified and directed.

S&F, 20 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors complete as specified and directed.

S&F in repairs CONCEALED stop cock of 15mm bore reduced body etc complete all as specified and directed.

S&F in repairs angular stop cock of long thread 15mm bore complete all as specified and directed.

S&F in repairs 15mm bore brass chromium plated fancy type hot and cold wall mixture (wall mounted model ) with telephonic shower and telephone fixed complete all as specified and directed.

S&F in repairs 15mm bore brass chromium plated fancy type central hole basin mixture w/o pop up waste system with 450mm long braided hoses etc complete all as specified and directed.

S&F in repairs, 15 mm bore pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs, 15 mm bore pillar taps, fancy type Swan neck, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs, 15 mm bore Bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, 15 mm bore Bib taps, fancy type, long body with wall flanges cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, brass chromium plated fancy type towel ring square fixed etc complete all as specified and directed.

S&F in repairs, brass chromium plated fancy type towel rail 600mm long complete all as specified and directed.

S&F in repairs, for coloured wall hung /cascade type EWC flushing cistern & jet complete all as specified and directed.

S&F in repairs, vitreous china urinal , half stall type white with gratings, union for discharge pipe , flush pipe and waste pipe , CP urinal spreader fixed to water supply pipe etc complete all as specified and directed.

S&F in repairs, vitreous china urinal partition ,white of size 310 x 700mm etc complete all as specified and directed.

S&F in repairs coloured oval type wash hand basin, size 550x400 mm, wliile, flat back, iron (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets waste pipe 32mm, coupling etc fixed as in counter slab etc complete all as specified and directed .

S&F in repairs Toilet paper holder, cast copper alloy, chromium plated fixed in position, complete all as specified and as directed.

S&F in repair Cast copper alloy, chromium plated soap dish, complete all as specified and as directed.

S&F in repair looking mirror of size 1500 x 600mm, 5.5 mm thick duly surrounded by teak wood beading and 6mm thick back ply fixed with suitable arrangement etc complete all as specified and as directed.

S&F in repair CP grating of size 125mm complete all as specified and as directed.

S&F in repair corner shelf of size 300 x 300 mm made out of 5 to 7mm thick superior quality glass with CP bracket and railing fixed etc complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pedestal pattern white excluding fixing bolts , flushing cistern and flush pipe complete but including PVC seat cover with aluminium hinges devices & EWC jet chromium plated with 1.00 mtr long PVC connection pipe complete all as specified and directed.

S&F in repair single piece vitreous china wash down water closet pedestal pattern white inclding fixing bolts , flushing cistern and flush pipe complete PVC seat cover with aluminium hinges devices & EWC jet chromium plated with 1.00 mtr long PVC connection pipe complete all as specified and directed.

S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories required complete all as specified and directed..

S&F in repairs, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete all as specified and as directed.

S&F in repair brass ball/lfloat valve with PVC ball complete suitable for 20mm bore pipe complete all as specified and as directed.

S&F in repairs PVC connection 60cm long with brass check nuts on both sides suitable for 15mm bore pipe etc complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) jointless area of each tile exceeding 0.11 but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over 15mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick in light/dark shade (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.

All as per BOQ srl item No 34.00 here-in-above but as in skirting including 10mm thick in CM 1:4 rendering as in backing coat complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm screed bed in CM 1 : 4 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing etc complete all as specified and as directed.

All as per BOQ srl Item No. 37.00 here-in- above but on vertical surface such as dado, skirting etc over 10 mm thick screed in CM 1:4, complete all as specified and as directed. .

M&L for 20mm thick granite stone slab as in shelves over cooking platform, machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over 20mm thick screed bed in CM 1 : 6 etc complete all as specified and as directed.

All as per BOQ srl Item No. 39.00 here-in- above but on vertical surface such as dado, skirting etc over 10 mm thick screed in CM 1:4,complete all as specified and as directed..

Dismantling of plain or corrugated steel sheeting any guage , thickness, including Nainital or similar pattern from roof covering complete all as specified and directed.

S&F pre painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as specified complete all as specified and as directed.

Excavation in post holes each not exceeding 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance exceeding 50m and making good surface in soft/loose soil, complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded mechanically crushed stone aggregate) in foundation mass concrete and filling complete all as specified and as directed.

Dismantling of mild steel work or wrought iron of any description in any position complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or inducton but welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed.

S&F mild steel framed work such as grills , grating etc with ends of bars shouldered and/or riveted or forged into spikes , framed guard bars, barred iron doors , ladders, drain cover, balusters ; walk ways ; railings , frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L preparation of new steel surfaces exceeding 10 cm girth and apply two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins arches pillars etc and removing from site complete all as specified and as directed.

M&L brick work with sub class 'B' brick (old size) straight or curved on plan exceeding 6m mean radius in CM (1:6) complete all as specified and as directed.

Taking down cement plaster on brick wall including racking out joints,soffits of slabs/chajja/sunshaded hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:4 mixed with WPC @ of 3% by wt of cement finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid seperately under supply only

Supply only Dr fixit integral WPC /liquid complete all as specified and directed.

M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete surfaces complete all as specified in SSR Part - I clause 14.22 complete all as specified and directed. Note : Rough cast finish to be as below :- After applying the under coat of cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with course sand and cement in the ratio of 1 : 1 : 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger agg are thoroughly covered.

M&L for preparing newly plastered surface of walls and applying two coats of exterior acrylic paint (water based) over a coat of primer in camouflaging pattern of any shade and pattern complete all as specified and directed.

M&L for preparing newly plastered surface and applying two coats of distemper oil emulsion over a coat of 3mm putty complete all as specified and directed.

M&L for preparation of plastered or unplastered surfaces of walls and applying one coats of distemper oil emulsion on old surfaces upto any height including necessary scaffolding as required, complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying one coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge, Note: Sample of camouflage pattern to be approved as per the user requirement

M&L for applying one coat of white wash on plastered or unplastered old decorated surfaces on wall at any height in Bldgs / Blast Pens incl preparation of surfaces and filling all holes with putty etc complete all as specified and directed by Engr-in-Charge

S&F 5 mm thick plain colour PVC sheet hollow interlocking wall panelling of width 250 mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith PVC 'U' and 'L' beading at corner and end portion where ever required of matching colour including taking down of existing wall lining, board or insulation board/panelling including cover fillets of any type and thick complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also include taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.

S&F 5 mm thick plain colour PVC sheet, solid PVC wall panelling/ lining PVC sheet inclusive of solvent cement and fixing at site with and including 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and directed including taking down of existing wall lining, board or insulation board including cover fillets of any type and thick complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also include taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets and false ceiling frame work of any size/ description complete all as specified and as directed by the Engineer-in-Charge.

S&F of semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 476 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and directed. NOTE : -Unit rate quoted against this item shall also include taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.

S & F GI Metal powder coated suspended ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications including 4mm thick HPSC pre-prime non asbestos fiber cement building board (E-classic or equivalent) decorative finish fixed to frame work with hold down clips in false ceiling complete all as specified and as directed

Demolition of PCC in ground floor and pavings not exceeding 15 cm thick below or above ground level complete all as specified.

Demolition of PCC in ground floor and pavings exceeding 15 cm thick below or above ground level complete all as specified and as directed.

M & L for 100mm thick PCC 1 :4 :8 type D-2 ( using 40mm graded mechanically crushed stone aggregates) as in sub base of floors complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B 1 (using 20 mm graded mechanically crushed stone aggregates) as in floor finish even and smooth using extra cement complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 ( using 20 mm graded mechanically crushed stone aggregate) as in plinth protection/path laid in bays incl finishing the concrete surface even and smooth without using extra cement complete all as specified.

M&L for PCC (1 : 2 : 4) type B-0 (using 12.5mm graded mechanically crushed stone aggregates) as in roof kerbs, mud stop, benching, coping padding and the like complete all as specified and directed.

M&L for chequered cement concrete pre polished colour tiles 30cmx30cmx25mm thick set and jointed in neat cement slurry in floor using grey cement with pigment including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and as directed.

S&F in repair 20mm dia powder coated MS curtain rod with require brackets, decorative piece on ends with teak finish appreance etc complete all as specified and directed.

M&L in repairs venetion blinds roller curtain 1mm thick flap with adjustable arrangements for vertical/horizontal movements including all necessary fittings for windows as per approved design complete all as specified and directed.

Taking down Chowkats With shutters(without taking of shutters from the frames) or frames not exceeding 1.5 Sqm including dismantling of brick work for hold fast complete all as specified and as directed.

Taking down Chowkats With shutters(without taking of shutters from the frames) or frames exceeding 1.5 Sqm but not exceeding 4 sqm including dismantling of brick work for hold fast complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 sqm and removing from site etc complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and removing from site etc complete all as specified and as directed.

Taking down wooden shutters of any description not exceeding 1 sqm and refixing in same opening after necessary repair/easening complete all as specified and as directed.

Taking down wooden shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and refixing in same opening after necessary repair/easening complete all as specified and as directed.

S&F anodised aluminium window shutters with chowkhat made out hollow aluminium section suitable for aluminium shutter sliding and glazing with 5.00mm thick glass fixed with glazing clips, rubber beading and aluminium beading etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO Glass : SAINT GOBAIN/MODI GUARD/TATA CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS MEMBER SIZE : 100 X 44 X 1.60 MM THICK

S&F anodised aluminium window shutters with chowkhat made out hollow aluminium section suitable for aluminium shutter and aluminium guard bars ech shutter having two numbers aluminium hinges 100mm long , aluminium handle of 100mm size , 150mm long two Nos aluminium tower bolts and glazing with 5.00mm thick glass fixed with glazing clips, rubber beading and aluminium beading etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO Glass : SAINT GOBAIN/MODI GUARD/TATA CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS MEMBER SIZE : 100 X 44 X 1.60 MM THICK

S&F anodised aluminium door made out hollow aluminium section as mentioned below. Each door having 02 Nos disk or D type handle of 200 mm long , two Nos aluminium tower bolts of 200 size , one No mortice lock of six levers with key in duplicate regulated by double action hudrolic floor door spring (Make - Sandhu/Titz) shutters to be partly glazed with 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasket anodised aluminium beading screws etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO Glass : SAINT GOBAIN/MODI GUARD/TATA CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS VERTICLE STYLE : 100 X 44 X 1.60MM SHUTTERS LOCK RAIL : 150 X 44 X 1.60MM SHUTTERS BOTTOM RAIL : 200 X 44 X 1.60MM

S&F anodised aluminium partition wall or fixed type window/ventilator made out of aluminium anodised standard hollow section 100 x 44 x 1.60mm thick snap fit beading standard rubber gasket 5.5mm thick glass or 12mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminates and other side balancing light grey lamination etc complete all as specified and as directed.

S&F anodised aluminium grill of approved design/pattern fixed to aluminium frame work complete all as specified and as directed.

S&F 30mm thick factory made flush shutters , solid core construction , with block board core and ply wood face panels commercial type on both sides fixed to chowkhats etc complete all as specified and as directed.

S&F to chowkats, 35mm thick, 1st class soft wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. complete as specified and directed . Sizes of members of shutters in SSR Part I, Section -8, clause 8.24 (a).complete all as specified and as directed.

S&F MS framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, etc complete drilled for fixing to steel sheeting or other covering, doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete conforming to Fe-410-W (Gde E-250 quality 'A') complete all as specified and as directed.

S&F Solid PVC Door frame of size 50 mm x 47mm made out of 5mm thick wooden grain printed PVC sheet reinforced with MS square tubes , supplied and fixing in opening as per specification and Drg complete all as specified and as directed.

S&F factory made solid panel PVC wood grain printed door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixed in the frame at site complete as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

S&F 3mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in square not exceeding 0.5 sqm each panes including hacking out old broken glass (any thickness) size , qauality or description from wooden/steel frames etc complete all as specified and directed.

S&F 3mm thick figured glass, pin head type glazing with oil putty or wooden beads in square not exceeding 0.5 sqm each panes including hacking out old broken glass (any thickness) size complete all as specified and directed.

S&F but hinges stainless steel 100mm long medium weight etc complete all as specified and directed.

S&F aluminium anodised extruded fabricated type handle 150mm long etc complete all as specified and directed.

S&F aluminium alloy , anodised , sliding door bolt with hasp , staples (bolt type) 250mm long and fixing with bolts extruded sections etc complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section and fixed etc complete all as specified and directed.

S&F MS framed work as in grill or framed guard bars with end of bars welded or riveted into spikes conforming to Fe- 290, grade E-165 complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete with glazing bars etc complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stainless steel staples to windows complete all as specified and directed. .

M&L preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 19/20mm thick block board grade 2 quality interior grade commercial type fixed with screws to timber frame work m as in cup board shutters , shelves etc complete all as specified and directed. .

S&F 40mm dia cup board knobs fixed with nut and washers of mild steel bright finish complete all as specified and directed. .

Taking down of aluminium door shutters of any description area exceeing 1 Sqm but not exceeding 2 sqm and refixing in same opening after necessary repair/fixing of floor spring etc complete all as specified and directed. . Note : 1. Floor spring shall be paid separately. 2. quoted rate shall be deemed to be inclusive of all T&P required for repair incl fixing of rubber packing , screws etc complete to make good the shutter complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed. .

S&F in repair aluminium alloy door closer hydraulically regulated , designation No 2 universal type, suitable for door shutter of 701 to 850mm in width and wt between 36 to 60 Kg and fixed to door frame complete all as specified and directed. .

S&F in repair aluminium hinges 100mm long/ handle 150mm long/tower bolt 150mm long for aluminium windows complete all as specified and directed. .

S&F in repair 5mm thick tinted glass with glazing clips , rubber beadings and aluminium beadings for aluminium windows/doors exceeding 0.5 sqm complete all as specified and directed. .

S&F in repair 12mm thick prelaminated particle board with glazing clips , rubber beading/ gasket and aluminium beadings for aluminium door complete all as specified and directed. .

S&F in repair any size mild steel mortice lock four levers with double keys for aluminium door complete all as specified and directed.

S&F in repair aluminium D type handles 150mm long/ tower bolt 150mm long for aluminium windows complete all as specified and directed. .

M&L for dismantling brick tiles or terracing tiles single layer on roof, cleaning and stacking the serviceable tiles for reuse, offering credit for unserviceable tiles and removing rubbish to a distance not exceeding 250 Mtr complete all as specified and directed.

M&L for demolition of mud in roof any thickness including plastering and leeping (Whether full thickness removed or only part thereof) complete all as specified and directed.

M&L for roughing surfaces of roof ater removal of mud phuska completely and applying cement slurry with 3.00 Kg /Sqm complete all as specified and directed.

M&L for water proofing treatment over roof at any height consisting of evenly applied primer coat @ 0.30 Ltr/Sqm on surfaces, overlaps, joints etc and a layer of APP based polymeric membrane 3mm thick minimum weighing 3Kg/Sqm duly sealed at over laps joints with flame (completely by torch application) all as per manufacturer instruction over applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces and incl 15mm thick screed bed of CM 1:4 mixed with water proofing compound @ 2% by wt of cement complete all as specified and directed. Note : (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee (on account of any defect raised/noticed during a period of ten years) and shall be released after 10 years of completion of work. However contractor may deposit the FDR of same amount in favour of GE. If contractor fails to rectify the defect pointed out during this period , the defect shall be got rectified at contractor's risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

M&L for 40mm thick brick tiles laid and bedded in cement mortar 1:6, 15mm thick and joints grouted flush in cement mortar 1:3 mixed with 5% or crude oil by weight of cement complete all as specified and as directed.

M&L for wire brushing and cleaning top surfaces of tiles , lime terracing or cement concrete incl flashing and junctions of parapet etc and surface painting with a layer of blown bitumen of any penetration applied hot @ 1.7 Kg/Sqm blinded with grit or pea size gravel @ 0.006 cum per sqm and lightlyt tampered, complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors, complete all as specified and directed.

JS CONSTRUCTION COMPANY (BID ID -3074517)

SWAMI ENGINEERS (BID ID -3065837)

m/s parmod kamar (BID ID -3065980)

Bairagi Builders (BID ID -3064293)

SARJIT SINGH AND CO. (BID ID -3074540)

Gupta Enterprises (BID ID -3078067)