REPAIR/MAINTENANCE OF INTERNAL ELECTRIFICATION AND OTHER ALLIED WORKS AT ZONE-5 (155 BH, 4 CDU, 56 FMSD, 118 FHO), ZONE 2A, 2B AND 4 UNDER GE (S) TEZPUR

Amount

M&L for rewinding of ceiling fan,1200mm any make and any type of model, after taking burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and reassembling with new bearings (both) and new capacitor complete all as specified and directed

Ditto as in Item No 1 as above but for ceiling fan of 1400mm size

Ditto as in Item No 1 as above but for Exhaust fan of 200/225/250 mm size

Ditto as in Item No 1 as above but for Exhaust fan of 300/380 mm size

M&L for painting of fan (ceiling fan / exhaust fan/wall mounted fan ) any sweep with applying one coat of synthetic enamel paint (Ceiling Fan -White Paint and Exhaust fan - Gray Paint ) by spray machine including preparation of old painted surfaces with filling of cavity by filler with and including writting of MES No. of fan in capital letters with black synthetic enamel paint of height not less than 20mm on fan body in approved pattern complete all as specified and directed.

Supply and Fix louver shutter made out GI sheet for Exhaust fan 300/400 mm sweep including proper fixing with screw in wall at existing Hole including taking down old unsv louver shutter complete all as specified and directed.

S & F Capacitor( 2.5-4) MFD for ceiling fan/Exhaust Fan of any make, any model and any sweep including taking down old unsv capacitor. Make- Havells/Usha/Tibcon/Universal

S & F Down rod 15mm bore medium grade GI pipe including cut in required length and drilled as per existing size including taking down old unsv down rod complete all as specified and directed.

S & F Fan blade for Ceiling fan of 1200mm sweep of white colour including taking down old unsv fan blade complete all as specified and drected.

S & F in repair Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/legrand/hager.

All as Per Item No-10 , but for DB 6 way.

S & F Power line vertical type TPN DB double door 4 way, IP 43 suitable for MCCB 100 amps CRCA sheet metal enclouser with detachable gland plates for flush / surface mounting with bus bar neutral link and Earth Bar in concealed and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed.

S & F in repair MCB SP 6 to 32 Amp, B series , 230 Volts complete all as specified and directed .

S & F in repair MCB SPN 6 to 32 Amps, B series, 230 Volts complete all as specified and directed .

S & F in repair MCB DP 40-63 Amps, B series, 230 Volts complete all as specified and directed.

S & F in repair MCB TPN 40-63 Amps, B series, 10 KA "B" series 415 Volt complete all as specified and directed.

S & F in repair MCCB 4 Pole 415V Fixed type 25-100A with breaking capicity 16 KA complete all as specified and directed.

S&F MCB DB, Double door, TPN, 415 volt, 4 way, with metallic door, with copper busbar for Phase neutral and earth, earthing point etc complete, suitable for 01 TPN MCB as incomer, and 12 SP MCB as outgoing.

Taking down the existing U S wiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with conduit/casing caping, along with all connected accessories etc complete all as directed.

M&L for point wiring complete for One light point with 1.5 Sqmm single core multistranded copper conductor FR PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through PVC casing caping including provn of 1.5 sqmm single core multistranded copper conductor FR PVC insulated and unsheathed as earth wire continuity conductor, including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition) complete all as specified and directed.

Ditto as per Item No 20 above but for one fan / Exhaust fan point

Ditto as per Item No 20 above but for One 3 pin 5 Amp socket outlet on the same board

Ditto as per Item No 20 above but for One 3 pin 5 Amps socket out let on independent board

Ditto as per Item No 20 above but with 2 x 2.5 Sqmm +1 x 1.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.

Ditto as per Item No 20 above but for one bell point controlled by one 5 amp switch

Ditto as per Item No 20 above but for one light point controlled by two two way switches

S & F in repair electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan complete all as specified .

S&F in repair switch piano type, 5/6 Amp. SP, one way all as directed/ specified.

S&F in repair switch piano type, 15 Amp. SP, one way all as directed/ specified.

S&F in repair socket outlet, 2 in one 5 pin, 5 Amp, piano type all as directed/ specified.

S&F in repair socket outlet, 2 in 1, 3 pin 5 and 15 Amp flush type universal all as directed/ specified.

S&F in repair switch bell push, flush type, 5 Amp all as directed/ specified.

S&F in repair bell, AC, 230 V, SP, ding dong type all as directed & specified.

S&F in repair of Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified.

S&F in repair switch two way switch flush type, 5 Amp all as directed/ specified.

M&L in repair for PVC rectangular board for mounting, switches, sockets, fan regulator etc. ISI marked, plastic sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

M&L in repair for PVC rectangular board for mounting, switches, sockets, fan regulator etc. ISI marked plastic sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and directed.

M&L in repair for PVC rectangular board for mounting, switches, sockets, fan regulator etc.ISI marked plastic sheet cover of size 200 mm x 105 mm and 50 mm deep complete all as specified and directed.

M&L in repair for PVC rectangular board for mounting, switches, sockets, fan regulator etc. ISI marked plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified and directed.

M&L in repair laminated sheet or hylam sheet for mounting, switches, sockets, fan regulator etc. of any size as per site requirement complete all as specified and directed.

S & in repair PVC casing caping of 19/25 mm complete all as specified and directed.

M & L for Point wiring for one light point with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and in non metallic concealed PVC rigid conduit and conduit accessories, medium grade, ISI marking, concealed Frame for fixing switches, sockets, inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable FR grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch complete including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/paint/distemper) wherever required(as per the existing condition) all as specified and directed Note - The cost of modular metal flush box and Modular white Cover Plate with Frame are included in the quoted rate .

Ditto as per Item No 42 above but for one fan / Exhaust fan point

Ditto asper Item No 42 above but for One 3 pin 5 Amp socket outlet on the same board

Ditto as per Item No 42 above but for One 3 pin 5 Amps socket out let on independent board

Ditto as per Item No 42 above but with 2 x 2.5 Sqmm +1 x 2.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.

Ditto as per Item No 42 above but for one bell point controlled by one, one 6 amp switch.

S&F in repair modular switch flush type, 6 Amp. SP, one way ,1 module all as directed specified.

S&F in repair modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed/ specified.

S&F in repair modular switch, 16 Amp flush type 1 module all as directed/ specified.

S&F in repair modular socket outlet, 3 pin, 6/16 Amp flush type 2 module all as directed/ specified.

S&F in repair modular bell push, flush type, 5 Amp,1 module all as directed/ specified.

S&F in repair modular Fan Regulator step type 2 module ,120W all as directed/ specified.

Taking down old unsv submain wiring of any size complete all as specified and directed

M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC concealed conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.

ditto as in Item No-55 above but for 2 x 6.0 sqmm + 1 x 6.0 sqmm earth wire

M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC casing caping and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.

ditto as in Item No-57 above but for 2 x 6.0 sqmm + 1 x 6.0 sqmm earth wire

S & F angle bulb holder for LED fitting, B22 base, including taking down old unserviceable type holder all as specified and directed by Engr in charge.

Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 10 W/9W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting. LUMILINEBS10WLED865SPCWH and Equivalent CG/Bajaj/Usha/Jaquar/Philips.

All as Per Item No- 61 , but for 18/20W 4 ft make of Havells cat no. LUMILINEBS20WLED830SPCWH and Equivalent CG/Bajaj/Usha/Jaquar/Philips

S & F in repair 12 Watt LED fitting Recess/Surface mounted downlighter (Round/Square) with independent electronic LED driver ensuring glare free light with all its surface module accessories including taking down old unserviceable type downlighter including taking down unsv light fittings comlpete all as specified and directed. make-Havells cat No.EDGEPRONEORDDLR12WLED840S and Equivalent CG/Bajaj/Usha/Jaquar/Philips.

S & F 30/36 Watt LED panel fitting Falce ceilling mounted ( 2 ft x 2 ft ) including accessories , colour temp >= 5700K with die cast body with premier diffuser ensuring glare free light including taking down old unserviceable type downlighter all as specified and directed by Engr-In-Charge . Havells cat No. VENUSNEO2X2PLR36WLED830PRALMOD and Equivalent CG/Bajaj/Usha/Jaquar/Philips.

S & F 10 Watt LED panel fitting surface/falce ceilling mounted (As per requirement) including accessories , colour temp >= 5700K with die cast body with premier diffuser ensuring glare free light including taking down old unserviceable type downlighter all as specified and directed by Engr-In-Charge.make-Havells cat No.EDGEPRONEORDDLR10WLED840S and Equivalent CG/Bajaj/Usha/Jaquar/Philips.

M & L in replacement for Earthing complete with GI earth plate electrode 60cmX60cmX6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth lead of 4 mm dia as earthing conductor by means of bolts, nuts, check nuts and washers of GI and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified locations and as directed by the Engineer-in-Charge. Note: 1.The above quoted rate shall include cost of main earthing lead of 4mm dia GI earth wire up to 7.5 mtr, charcoal, salt, excavation and earth work in any type of soil CI cover, funnel with 20mm dia light grade GI water pipe including GI protection pipe 15mm dia light grade for earth lead etc. 2. The cost of earth pit is deemed to be included in the unit rate. 3. The cost of taking down old unsv earthing with all its accessories is deemed to be included in the unit price.

Supply and fixing/laying/ in replacement of passing through pipe in replacement of , 1100 volts grade heavy duty cable with PVC insulated Stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 core 6 sq. mm nominal cross section in service connections complete all as directed. Make - Finolex /Havells/Polycab or equivalent

All as in Item No- 67, but for 4 core 10 sqmm

S & F in repair connection pipe suitable for 90 Degree Centigrade of water of 15 mm dia and 450 mm to 600 mm length as per site requirement for geyser of any capacity complete all as specified and directed.

Supply and fix Heating element of 1500/2000 watts suitable for 25 ltrs capacity water heater including taking down old unsv element complete all as specified and directed.

S & F Thermostat of range 0-80 degree Celsius suitable for 25 Ltrs water heater including taking down old unsv thermostat complete all as specified and directed.

Supply and fixing/laying/ in replacement of 1100 volts grade heavy duty cable PVC insulated aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular 10 sqmm complete all as directed. Make - Finolex/Havells/KEI/Polycab

All as in Item No- 72, but for 6 sqmm

Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose soil for laying cables, etc. complete all as specified and as directed.

Returning, filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing surplus excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed..

M&L for sand cushioning with clean dry sand for protection of under ground cable complete all as specified and as directed. Note :- Punned thickness of sand layer shall be measured abd paid to contractor.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

Supply, lay and fix in replacement of 40 mm bore galvanized iron water tubing low grade including all fittings and fixed/ laid in trenches or on poles complete all as specified and directed.

D.B ENTERPRISE

M/S N S CONSTRUCTION

D G Corporation

SHANKAR ENTERPRISE

Ms N D Enterpise

Chinmay Traders

M/S J.C Medhi

M/S BORAH ENTERPRISE

M/S S K ENTERPRISES