Construction of Girls Hostel 100 Nos. students for B. Pharmacy Govt. College Nagrota Bagwan in District Kangra, (H.P.) (Deposit Work)

Amount

Excavation in foundation, trenches etcetera. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out wter (Surface and sub soil water) upto any depth or any height quantum of water including de-watering removal of slush, lift upto any heights, stacking the excavated soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimeter)layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-Incharge including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in earth work and filling in 15 cm (Fifteen Centimetres) layers in foundation and plinths including ramming, watering and consolidating upto all leads, lifts and in all classification of soil as directed by the Engineer-Incharge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in drains and channels etcetera; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil including chiseling or welding out works where blasting work is prohibited including shoring, strutting and pumping or bailing out water (Surface and sub soil water) upto any depth or any height quantum of water including slush which may arrise during dewatering removal of slush and any other mixed variety of soil, stacking the excavated soil for all heights clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinth sides of foundations etcetera. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per approved drawing, design, specification and as per the entire satisfaction of the Engineer-Incharge including carriage of materials within all leads, lifts of and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Sand filling under floor including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriae of material within all leads, lifts and other incidentals as per specification approved drawing, design, entire satisfaction and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings windows sills, cornices, arches, moulding, corbelling including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels window sills, cornices, arches corbelling including curved surfaces where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriae of material within all leads, lifts and other incidentals as per approved drawing, design, specifications entire satisfaction and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including mouldings, cornices etcetera; including carriae of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, including carriae of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in work in edge of slab and breaks in floors and walls under any thickness including carriae of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls(any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses and the like including carriae of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded broken/crushed stone aggregate 40mm (Forty milimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Brick bat in the sockpit filling complete as per approved specifications, drawing, design as per entire satisfactions and directions of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals as per approved specifications drawing, design. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Stone filling under floor within hard stone of approved quality including watering, ramming, consolidating and dressing complete as per approved specifications, drawing, design as per entire satisfactions and directions of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals as per approved specifications drawing, design. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement; four sand; eight graded broken/crushed stone aggregate 40mm (Forty milimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum ccompressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic metre to give a smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete in all depths/thickness upto all floors levels as per specifications, drawing, design as per entire satisfaction and direction of Engineer-Incharge including carrige of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depth/thickness including mouldings, cornices etcetera upto all levels as per specifications, approved drwaing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic metre mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts in all depth/thickness for all floors heights as per specifications approved drawing, design including carriage of materials within all heights leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing moulding upto all floor level as per specifications approved drawing, design including carriage of materials within all heights leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in walls (thickness not more than 0.10m) (Zero point one zero metre) individually or forming box louvers and projected band upto all floor level as per specifications approved drawing, design including carriage of materials within all heights leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying upto floor level reinforcement concrete work M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic metre mechanically mixed and vibrated and curing complet including centring and shuttering etcetera. but excluding the cost of reinforcement as in mouldings, cornices, window sills etcetera upto any girth as per specifications, drawing and design complete as directed by the Engineer-Incharge.upto floor all level including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated and curing complete in reinforcement work for reinforced concrete Chhajjas for all thickness in all floor levels up to all heights including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work and curing complete but excluding the cost of reinforcement for reinforced concrete work up to all floor level up to all height as per direction of Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and specification. The rate inclusive of octroi, royality, Malkana, sale tax, GST and any other taxes imposed by the Government.

Providing Tor steel reinforcement TATA/SAIL/TISCO for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position cost of binding wires complete for upto all floors heights as per specifications, approaved draing, design and carriage of material within all leads, lifts and other incidentals, as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Random rubble masonry coursed with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement: six sand: twelve graded crushed stone aggregate 20 mm (Twenty milimetres nominal size) raking out joints in cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all heights, leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including rakcking out joints with cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of materials within all heights leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetres) thick with cement concrete 1:2:4((one cement: two sand: four graded crushed stone aggregate 12.5mm (Twelve decimal five milimetres nominal size) and curing complete, as required at site including carriage of materials within all heights leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) or equivalent using 1.70 Kgs (One decimal seven zero Kilograms) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil; including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class brick masonry using common burnt clay building bricks in super-structure upto any floor level in cement mortar 1:6 (One cement: Six sand) and curing complete including carriage of materials within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class Half brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:4 (One cement: Four sand) and curing complete including carriage of materials within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 35mm (Thirty five milimetres) thick factory made flush door shutters both side commercial i.e non-decorative (Phenol bonded termite resistant and boiling water proof, core of black-board construction with frame of first class hard wood and well matched commercial three ply veneer with vertical grains of cross bands and face veneer on both faces of flush shutter ISI marked IS No-2202 of Century ply Board/Kit ply, Green ply complete including carriage of material within all leads, lifts and other incidentals as per specifications approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetres) thick first class Deodar wood wire gauge shutters using galvanized S.S. wire gauge of I.S. gauge designation 85G (Eighty five-G) with wire of dia 0.56 mm (Zero decimal five six millimetres) for doors, windows and clearstory windows including bright finished/ black enameled iron hinges with necessary screws complete including entire carriage of materials within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing with glass panes of 5.50 mm (Five decimal five zero millimetres) thickness of Modi gaurd/Saint Gobin (weight not less than 13.75 kg/sqm (Thirteen decimal seven five kilgrams) per square metre in door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per specifications, architectural drawings and the directions of Engineer-In-charge complete as per directions of Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing cup board shutter made of 19mm (Ninteen milimetres) thick commercial board water proof and termite resistant of Kit ply/Centuary ply including 6/12mm (Six/Twelve millimetres) thick hard wood edging on all sides of the shutters, 2mm (Two millimetres) thick lamination of MICA of kitply/Centuary ply finish on exposed outer face and nickel plated piano hinges with necessary screws complete including entire carriage of materials within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetres) thick water proof commercial board in shelves/box of Kitply/Centuary ply for cup board including its shelves and all cut portions of the board shall have 6mm (Six millimetres) thick hard wood edging with butt joints & fixing with nails & screws etc complete including entire carriage of materials within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (Six millimetres) thick ply wood lining of Kitply/Century ply with butt jointing (frame work and cover fillets to be measured and paid for separately) in cup boards complete including entire carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetres) thick water proof commercial board in SDB shutter of Kitply/Centuary ply including all cut portions of the board shall have 6mm (Six millimetres) thick hard wood edging with 0.63 mm thick P.G.I. lining inner side of the shutter including fixing with nickel plated piano hinges and screws etcetera complete including entire carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (Six milimetres) thick hard wood edging cover fillets (beading) section including mitring at junction with wood screw and nail complete including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 2mm (Two milimetres) thick coloured or plain laminated sheet ( Sunmica) of Kitply/Century on board/ ply wood sheet with approved adhesive and nails & screws etc complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (1cement : 5 sand; 10 graded crushed stone aggregate 40mm(Forty millimetres) nominal size) mechanically mixed and curing complete excluding cost of form work in Foundation and plinth complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing cup-board shutter magnic catcher with necessary screws etcetera complete within all leads, lifts of material and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five milimetres) size special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete (Indian make) including carriage of material within all leads, lifts of materials and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing MS (mild steel) grills of required pattern in MS (mild steel) frames of windows etc with M. S flat 20x5mm (Twenty into Five milimetres), square bars in combination as per detail with round headed bolts and nuts or by screws complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty milimetres) dia steel rod for pelmet with necessary fittings complete including entire carriage of materials within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen milimetres) size aluminium Pilot/sheel or equivalent sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S Tower bolts (Barrel type) of approved quality bright finished or black enameled with nuts and screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

200x10mm (Two hundred into Ten millimetres) nominal size

150x10mm (One hundred fifty into Ten millimetres) nominal size

100x10mm (One hundred into Ten millimetres) nominal size

Providing and fixing M.S. handles of approved quality to required colour and shade with the necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five millimetres) nominal size

100mm (One hundred millimetres) nominal size

75mm (Seventy five millimetres) nominal size

Providing and fixing M.S. (mild steel) hooks and eyes of 250mm (Two hundred fifty millimetres) size of approved quality to required colour and shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) bright finished Aluminium floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing hydraulic door closer of ISI marked of Gogrej C0712 speed hydraulic 60 Kgs (Sixty kilograms) (Silver) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

White glazed tiles 6mm (Six milimetres) thick of Nitco/Orient/Bell/Kajaria size 20x30cm (Twenty into thirty centimetres) in skirting, risers of steps and dado laid on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five milimetres) thick Kota Stone flooring 55x55cm (Fifty five into Fifty five centimetres) of uniform colour with black mandana /Jaislmer yellow marble band base of cement mortar 1:4(One cement: Four sand)laid over and jointed with Grey cement slurry mixed with pigment to match the shade of the Kota stone slab with including rubbing and polishing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 50mm (Fifty milimetres) thick cement concrete flooring 1:2:4(One cement: Two sand : Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size laid in one layer finished with a floating coat of neat cement upto all floor level including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying red sand stone slab flooring 40mm (Forty milimetres) average thick on 20mm (Twenty milimetres) average thick base of cement mortar 1:4 (One cement : Four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and granite polish finish complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vibro hydraulic compressed and polished 300x300x25mm (Three hundred by three hundred by twenty five millimetres) polished terrazzo tiles of NITCO ISI marked No-1237, top layer in 70% (Seventy percent) white, 30% (Thirty percent) grey cement. The ratio of chips shall be 55% (Fifty five percent) white and 15% (Fifteen percent) each maroon, yellow & dark green shade. The size of chips shall be O,B,2B. The sample of tiles shall be got approved from the competent authority before its execution at site, in floor, treads, steps and landing on a bed of 25mm (Twenty five millimeters) thickness of cement mortar 1:6 (One cement : Six sand) jointed with neat cement slurry mixed with pigment to match the shade and colour of tiles (wherever required) including rubbing and polishing upto all floors levels complete including entire carriage of material as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetres) thick Baroda Marble work (table rubbed and polished) of required shade laid on bed of with semi round moulding and nosing complete in flooring 20mm (Twenty milimetres) thick cement mortar 1:3 (1 cement:3 sand) including jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of marble complete upto all floors levels including entire carriage of materials as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five milimetres) thick kota stone slab in risers of steps, skirting, dado and pillars laid on a bed of 12mm (Twelve milimetres) (Average) thickness cement mortar 1:3 (One cement : Three sand) and jointed with Grey cement slurry mixed with pgiment to match the shade of the slabs including rubbing, polishing, nosing and moulding complete including entire carriage as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25 mm (Twenty five milimetres) thick Kota stone single slab 55x55cm (Fifty five into fifty five centimetres) with round nosing in flooring laid over 20 mm (Twenty milimetres) (average) thick base of cement mortor 1:4 (1 cement : 4 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, nosing and moulding complete upto all floors levels including entire carriage within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 20mm (Twenty milimetres) thick white Marble slab with grey streaks internally as well as externally having semi round nosing laid on 20 mm (Twenty milimetres) thick base of cement mortar 1:3 (1 cement:3 sand) including jointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of marble complete upto all floors level including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing automatic vibro hydraulically pressed and polished terrazzo tiles of NTC ISI marked No. 1237 in 70% (Seventy percent) white cement having 30% (Thirty percent) grey cement. The ratio of chips shall be 55% (Fifty five percent) white cement and 15% (Fifteen percent) each maroon, yellow and dark green shade in skirting and risers of steps not exceeding 30cm (Thirty centimetres) in height laid on a bed of 10mm (Ten millimetres) thickness in cement mortar 1:3 (One cement : Three Sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (Wherever required) including rubbing, polishing and nosing complete upto all floors level, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 40mm (Forty millimetres) thick Precast cement conrete inter locking paver blocks of NTC vibro compacted upto M-50 (M-Fifteen) grade including border or kurb lock grey or coloured over sub-base of concrete laid over 25mm (Twenty five milimetres) thick average thickness of cement mortar 1:4 (One cement : Four sand) and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be measured paid and for seperately) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 150mm (One hundred fifty milimetres) thick M.S Single acting spring hinges of approved Quality with necessary screws complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet TATA / Shakti or equinalant in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required within all leads, lifts of materials and other. incidentals as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing ridges or hips laying propper Gola shape 60cm (Sixty centimeters) over all with 0.60mm (Zero point Sixty millimeters) thick prepainted sheet of TATA/Shakti for roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Tweny) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimeters) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimeters) over all with 0.60mm (Zero point Sixty millimeters) thick prepainted sheet of TATA/Shakti for roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 5 (Five) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimeters) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of materials as per specifictions, approved architectural drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing minimum 15cm (Fifteen centimeters) wide 45cm (Forty five centimeters) deep of 0.63mm (Zero decimal six three milimetres) thick plain G.I. sheet of TATA/Shakti for gutter with iron brackets 40x3mm (Forty into Three milimetres) size dume shape shall be provided which shall be M.S. plate 25x5/6mm Sqm (Twenty five inti five/six millimetres) square round shape with 6mm (Six millimetres ) dia bars in down bolts and nuts and washers etceteraetera including making necessary connections with rain water pipe complete within all leads, lifts of materials and other incidentals, as per specifications, approved architectural drawing, design and as directed by the Engineer-Incharge The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S.B.P. iron sheet 2.00mm (Two decimal zero zero millimeter) thickness for eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-Incharge (Base members of steel work shall be measured and paid separately) including fixing complete within all leads, lifts of materials and other. incidentals as per specifications, approved architectural drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100 mm (One hundred millmetres) dia pipes on wall face P.V.C (D-Plast) rain water pipes of Supreme/Sant of working pressure not less than 4.5 kg/sqm (Four point five kilograms per sqaure metres) including filling the joints with approved adhesive complete as directed by the Engineer-Incharge as per specifications, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millmetres) dia plain bend on wall faces P.V.C. (D-Plast) accessories for rain water pipes of Supreme/Sant including filling the joints with approved adhesive complete as directed by the Engineer-Incharge as per specifications, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100 mm (One hundred millmetres) dia plain shoe on wall faces P.V.C. (D-Plast) accessories for rain water pipes of Supreme/Sant including filling the joints with approved adhesive complete as per specifictions and as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. holder bat clamps of approved design to PVC rain water pipe embedded including cement concrete blocks 10x10x20cm (TEn into ten into twenty centimetres) of 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and cost of cutting holes and making good the walls etcetera; within all leads, lifts of materials and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections joints channels, angles, tees frame work for ceiling/false ceiling flats with connection plates or angles, cleat as in trusses, trussed purlins main and cross beams, hips jack rafters, purlins connected to common rafters and the like of TATA/SAIL in building including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint including framed work with angle tees 40x6mm including entire carriage of materials within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work, including cutting, fixing, lifting, hoisting and; placing in position of TATA/SAIL complete and applying a coat of red lead paint in gratings framed gaurds, bars, ladders, railing, brackets and similar work, including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing door frames manufactured from M.S. channel of 75 x 40 mm (Seventy five into forty millimetres) and M.S. flat 40 x 12 mm (Forty into twelve millimetres) as design and drawing including jamb, lock jamb, beed and if required angle threshold of M.S. angles 50x5 mm (Fifty into five millimetres) welded or regidly fixed by mechanical means lugs with spit ends to each jamb including steel butt hinges 2.5 mm (Two point five millimetres) thick with a provision a locking arrangement anf shock absorbers as specified and applying a coat of approved primer after pre-treatment of the surfaces including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron cupboard frames manufactured from M.S. Angle iron section 25x25x5mm (Twenty five into Twenty five into Five milimetres) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25x25mm (Twenty five into Twenty five milimetres) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two decimal Five milimetres) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface awithin all leads, lifts of materials and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. channels in doors and windows dormer frames manufactured from M.S. channels section 75x40x6mm (Seventy five into Forty into Six millimetres) M.S. flat 75x5mm (Seventy five into Five millimetres) combination as per design drawing including hinges, jambs, beeds if required threshold of M.S. angles 50x25mm (Fifty into Twenty five millimetres) and "Z" section as per detail welded or rigidly fixed by mechanical means lugs, with split ends tails to each jambs including steel butts hinges 2.5mm (Two decimal Five millimetres) thick with a provision of locking arrangements shock observes and specified and applying coat of approved steel primer after pre-treatment of surfaces including carriage of materials within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made double steel shutter side hung (one glazed and other wire gauged) of standard rolled steel section jointing mitered and welded with manufactured to relevant ISI standard specification with 16x3.15mm (Sixteen into three decimal fifteen millimeters) lugs 20cm (Twenty miliimeters) long embeded in cement concrete block 1:3:6 (One cement isto Three Sand isto Six graded stone aggregate 20mm (Twenty milimetre) nominal size) with wooden/steel plugs and screws or rawl plugs screws with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass pans with special putty of glazed side of shutter and wire gauge or designation 85G with metal beading on other side complete including priming coat of red lead paint as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made double steel shutter side hung (one glazed and other wire gauged) of standard rolled steel section jointing mitered and welded with manufactured to relevant ISI standard specification with 16x3.15mm (Sixteen into three decimal fifteen millimeters) lugs 20cm (Twenty miliimeters) long embeded in cement concrete block 1:3:6 (One cement isto Three Sand isto Six graded stone aggregate 20mm (Twenty milimetre) nominal size) with wooden/steel plugs and screws or rawl plugs screws with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass pans with special putty of glazed side of shutter and wire gauge or designation 85G with metal beading on other side complete including priming coat of red lead paint as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Fixed steel windows

Top hung ventilators

Supplying and fixing expended metal to wood or steel members in partition etc; having weight 6.50 Kg (Six poinr five zero kilogram) per square metre complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying double coat water proofing treatment done with Dr. Fixit Torch felt over depressive toilet area including maintain clean and saturated surface a coverage of 6 square feet per KG to achieve 1mm (One milimetre) thickness. This coating shall also be extended upto 300 mm (Three hundred milimetres) vertically. The second shall be applied of first coat. Then sprinkle sand on top surface of applied Dr. fixit- Fastflex while stilltacky over the second coat. Then apply cement mortar (1:4) one cement : four sand admixed with 200ml (Two hundred mililitres) of pidiproof LW@200ml/50kg of cement over the floor with the suitable gradient towards drain pipe, while the second coat of Dr. Fixit is still tacky complete within all leads, lifts of materials and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetres) dia M.S. hollow pipe hand rail as per detail including M.S square Bar 20 x 20 mm (Twenty into twenty milimetres) & 12 x 12 mm (Twelve into twelve milimetres) in combination with M.S. flat as per detail complete as per Architectural drawing ,design and specification including entire carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S./Bombay pipe 5cm (Five centimetres) dia in wooden colour stair railing over M.S. flat having balusters of 19x19 mm (Nineteen into Nineteen millimetres) and M.S. solid square bars in combination with M.S. flat and 19x6 mm (Nineteen into Six millimetres) with a clear height of 85 cm (Eighty five centimetres) @ 6 (Six) - centre to centre jointing in cement concrete steps and jointing with electic gas welding at top along with hand rail of hollow M.S. rectangular pipe of 75x25 mm (Seventy five into twenty five millimetres) (SWG-16) vertical M.S. solid square bars baluster welded/jointed with each with 2 (Two) Nos. M.S. flat of 40x6 mm (Forty into Six millimetres) complete with a priming coat of red paint as per specifications including carriage of material within all leads, lifts and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing of hollow pipe of 40mm diametre hand rail slip resistant with round ended joint at two level at 75 and 90cm (Seventy and ninety centimetres) height welded with 25mm (Twent five millimetres) diametre M.S. hollow pipe which baluster embedded in cement concrete and 60cm (Sixty centimetres) centre to centre and jointing with electrical gas welding at top alongwith hand rail of hollow M.S. pipe of 40mm (Forty millimetres) diametre. The baluster welded/jointed with each with 2 Nos M.S. flat of 50x5mm (Fifty into Five millimetres) thickness ) complete with applying priming coat of red lead paint complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) with Nerolac/ Asian or equivilant on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter enamel paint other than white including carriage of material within all leads, lifts and other incidentals as per specifications approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces with Nerolac/ Asian or equivilant after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint brushin wood primer pink including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on over new wood and wood based surfaces with Nerolac/ Asian or equivilant with enamel paint other than white brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (Six milimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement: Three sand) upto all floor level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Monad profiles tiles (Aluminium sheet) 60 x 60 cm (Sixty into sixty centimetre) having thickness 0.70mm (Zero point seven zero millimetres) powder coated G.I. channel frames work fixed/Hanging with wall or ceiling with specified clamps and G.I. wire mass rawl plugs etc; complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) upto floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/ concrete /stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all level including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement: Five sand) above plinth level to floor all level including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:3 (One cement: Three sand) above plinth level to floor all level including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement mortar 25 mm (Twenty five milimetres) wide & 12 mm (Twelve milimetres) deep groove in plaster @ 30 cm (Thirty centimeter) C/C in cement mortar 1:4 (One cement: Four sand) above plinth level to floor all level including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Distempering (two or more coats) of Dulux/Apex/Asian Paint with oil bound washable distemper and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.priming coat with distemper primer including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing wall with Premium Dulux/Apex/Asian paint finish of approved shade exterior grade emulsion of approved design on undecorated wall surface (two coat) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt, dust and foreign matteretc. including sand papering smooth complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with premium paint of Dulux/Apex/Asian paint on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

White washing with slacked lime white on undecorated wall/Ceiling surfaces two coats to give an even shade including thoroghly brooming the surface to remove all dirt, dust, mortar drops and loose scale of lime wash and other foreign matter including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetres) dia chromium plated steel pipe of Grab bar of 78cm (seventy eight centimetres) height with M.S. plate as per detail at the position of seat and wash basin complete etc; including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 23 cm (Twenty three centimetres) dia half round stone ware pipe including trenches in 50mm (Fifty milimetres) thick cement concrete 1:3:6 (One cement : Three sand : Six graded crushed stone aggregate 20 mm (Twenty milimetres) nominal size base concrete including finishing the top surfaces of concrete smooth as per detail drawing, design and directed by Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Plytheline – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe Kitec /Kisan U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on walls, including filling the joints with approved adhesive complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1216 (16mm (Sixteen milimetres) Outer diameters pipe

1620 (20mm (Twenty milimetres) Outer diameters pipe

2025 (25mm (Twenty five milimetres) Outer diameters pipe

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc; including carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing & fixing 1216 (One thousand two hundred sixteen) Kitec/Kishan Equal Tee

Providing & fixing 1620 (One thousand six hundred twenty) Kitec/Kishan

Providing & fixing Kitec /Kishan G.I. Female Elbows 1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) thread

Providing & fixing 1620 x 20 mm (One thousand six hundred twenty by twenty millimetres) thread Kitec/Kishan Female Elbow

Providing & fixing 2025 x 25 mm (Two thousand twenty five by twenty five millimetres) thread Kitec/Kishan Female Elbow

Providing & fixing Kitec /Kishan Male Connector 1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) thread

Providing & fixing 1620 x 20 mm (One thousand six hundred twenty by twenty millimetres) thread Kitec/Kishan Male Connector

Providing & fixing 2025 x 25 mm (Two thousand twenty five by twenty five millimetres) thread Kitec/Kishan Male Connector

Providing & fixing G.I/M.I. Union 15mm (Fifteen millimetres) Dia

Providing & fixing G.I/M.I. Union 20 mm (Twenty millimetres) Dia

Providing & fixing G.I/M.I. Union 25 mm (Twenty five millimetres) Dia

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty milimetres to Forty milimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred one milimetres) nominal bore/diametres (8/4.6 mm thick (Eight/Four point six millimetres) thick pipe in trenches P.V.C. Diplast pipe class A of Supreme /Sant of high pressure PVC Spigot & socket soil waste and ventilating pipe fixing with approved adhesive mixure completed within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) nominal bore/diametres (2.7 mm thick (Two point seven millimetres) thick pipe in trenches P.V.C. Diplast pipe class A of Supreme /Sant of high pressure PVC Spigot & socket soil waste and ventilating pipe fixing with approved adhesive mixure completed within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC Clamps ISI marked of approved design with steel screws and rawl plugs etc. complete within all leads, lifts and other incidental as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one milimetres) nominal bore/diametres

75mm (Seventy five milimetres) nominal bore/diametres

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete as directed by the Engineer-Incharge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one milimetres) nominal bore/diametres

75mm (Seventy five milimetres) nominal bore/diametres

Providing and fixing PVC tee medium class ISI marked including fixing with approved adhesive complete as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one milimetres) nominal bore/diametres

75mm (Seventy five milimetres) nominal bore/diametres

Providing and fixing PVC heal rest of Supreme/Sant including fixing joints with approved adhesive mixure complete as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one milimetres) nominal bore/diametres

75mm (Seventy five milimetres) nominal bore/diametres

Providing and fixing PVC collar of Supreme/Sant including fixing with approved adhesive mixure complete as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one milimetres) nominal bore/diametres

75mm (Seventy five milimetres) nominal bore/diametres

Providing and fixing PVC door bend with oval access door of Supreme/Sant insertion rubber washer 3mm (Three millimetres) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one milimetres) nominal bore/diametres

75mm (Seventy five milimetres) nominal bore/diametres

Providing and fixing 110 x 90 mm dia (One hunderd ten into Ninety millimetres) PVC floor trap of Supreme/Sant ISI marked of Self cleaning design including filling the joints with adhesive mixure complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC Double equal branch with oval access door of Supreme/Sant insertion rubber washer 3mm thick bolts and nuts ISI marked complete including with approved adhesive etc. including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one milimetres) diametres

75mm (Seventy five milimetres) diametres

Providing and fixing 110 mm dia (One hunderd ten millimetres) PVC P or S trap for water closet (squatting pan) ISI marked including jointing the trap with pan and PVC pipe with approved adhesive etc.complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing W.C. (Universal) No. 2061 Snow white shade of (57x46x40mm) (Fifty seven into Forty six into Forty millimetres) of Cera/Hindware vitrious china wash down closet (European type W.C. pan) with internal P or S traps including jointing the trap with pan and soil pipe in cement mortar 1:1 (One cement : One sand) complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china water closet squatting pan of HINDWARE/CERA of snow white shade (Indian type W.C. pan) size 58x44cm (fifty eight into forty four centimetres) orissa pattern Pan No. 2071 (earth work, bed concrete, foot rest and trap to be measured and paid for separately) complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 10.00 ltr. (Ten litre) net capacity PTMT coloured/white duel flushing cistern No. 2603 of Cera/Hindware with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same (over flow pipe to be measured and paid for separately within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Ncks 215 of size 57x45cm (Fifty sven into forty five centimetres) nominal size with bowl depth of 22cm (Twenty two cntimetres) Cera/Diamond of approved standard stainless steel kitchen sink with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting completeincluding carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash down closet (European type W.C. pan) No. 7011 of Cera/Hindware with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement : One sand) within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing viterous china wash basin of Hindware/Cera Canon No. 7707 45x30 cm (Forty five into thirty centimetres) snow white shade of Hindware /Cera including approved shade vitreous china wash basin with single hole without pedstal tap with C.I. or M.S. painted white including cutting holes and making good the same complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing in position with clamps 32mm (Thirty two millimetres) nominal size internal diametres galvanised steel tubes flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plastic seat (solid) hollow type and cover for wash dawn water closet with C.P. brass hinges and rubber buffers (black and white plastic seat and cover) complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing wash basin viterous china flat back having size Canon No. 1012 of snow white shade of Hindware /Cera 450x350mm (Four hundred fity into three hundred fifty millimetres) vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing NCKS 313 in size 100x51x20cm (One hundred into fifty one into twenty centimetres) of Cera/Diamond stainless steel kitchen sink with drain board with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting completeincluding carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) nominal size diametres rubber plug for wash basin (Heavy duty makes ISI marked) including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres M.I. union for wash basin or sink.complete, including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres PVC ISI marked Jal/ESS/ESS waste pipe for wash basin or sink including brass check nut complete, including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating Jal/ESS/ESS (Heavy duty makes ISI marked for gully floor or Nahni trap including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty milimetres) beveled edge mirror or superior glass mounted on 6mm (Six milimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass and screws and washers including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty milimetres) C.P. brass Towel rail ISI marked of Jal/ESS ESS or equivalent complete with C.P. brass brackets fixed to wooden plugs with C.P. brass including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into One hundred twenty milimetres) glass shelf with C.P. brass of Jal/ESS ESS or equivalent (Heavy duty makes ISI marked) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder of Heavy duty make ISI marked of Jal/ESS ESS or equivalent including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Chromium plated Jet spray of approved quality and ISI marked of Jal / ESS ESS of approved quality and colour with one metre tube complete including entire carriage of materials within all leads lifts and other incidentals, and per as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated PTMT push cock tap of ISI marked of Jal / ESS ESS complete including entire carriage of materials within all leads lifts and other incidentals, and per as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated ISI marked fancy bib tap with capstan head of ISI marked of Jal / ESS ESS complete including entire carriage of materials within all leads lifts and other incidentals, and per as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres C.P. brass pillar tap with capstan bead of IS marked of Jal/ESS ESS or equivalent including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres chromium plated brass angle valve without nuts IS marked of Jal/ESS ESS or equivalent including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel ISI marked of Jal/ESS ESS or its equivalent including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

25mm (Twenty five milimetres) nominal bore

Providing and fixing 15mm (Fifteen milimetres) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetres) length including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. SINTEX water storage tank having capacity of 1000 (One thousand) liters of ISI 12701 marked. G.I. inlet and outlet connection. 15mm (Fifteen milimetres) nominal bore ball valve and mosquito proof P.V.C. cover with locking arrangment including hoisting upto all heights above ground level within all leads, lifts of materials and other incidentals.The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying to level or slopes jointed with approved adhesive salt with PVC Pipe 8mm thick of Supreme or Sant grade A of the 160mm (One hundred sixty milimetres) internal diametres for sewerage line including testing of pies and joints complete within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer- Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (One cement : Five sand m: Ten graded crushed stone aggregate 40mm (Forty milimetres) nominal size) bedding for PVC pipe of the 160mm (One hundred sixty milimetres) internal diametres including testing of pipes and joints complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm ( Fifteen milimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 1.00 mtrs(One metre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing chamber 300x300mmx500mm (Three hundred into Three hundred into Four hundred milimetres) inside size for stop cock with C.I. surface box 100 x 100 x 75 mm (One hundred into One hundred into seventy five milimetres) inside with hinges cover fixed in cement concrete slab 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres nominal size) 75 mm ( Seventy five milimetres) thick in foundation concrete 1:5:10 (One cement: Fiver sand: Ten graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm ( Fifteen milimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete including entire carriage of materials within all leads lifts and other incidentals, and per as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty milimetres) nominal bore pet valve ISI marked or its equivalent without nut and pipe within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing manhole cover cast iron with frame. The weight of cover with frame should be 38 Kgs (Thirty eighty kilograms) weight of cover should be cover 23 kgs (Twenty Three Kilograms) and weight of frame 15 kgs (Fifteen Kilograms) complete within all leads, lifts of material and other incidentals, as per specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Ravi Kumar

Pawan Kumar