REPAIR TO PLASTERING, FLOORING, SANITARY FITTINGS, JOINERY, PERIODICAL SERVICES AND CERTAIN B/R WORK IN MES INSTALLATIONS AT AF STN AMBALA AND CAMOUFLAGE PAINTING TO CERTAIN BLDGS AND OFFICES IN TECH AREA AT AF STN AMBALA UNDER GE (AF) AMBALA

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick in light/dark shade (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm th in cement mortar 1:6 complete all as specified and directed.

All as per BOQ srl item No 2.00 above but as in skirting including 10mm thick in CM 1:4 rendering as in backing coat complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) jointless area of each tile exceeding 0.11 but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over 15mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down Chowkats With shutters(without taking of shutters from the frames) or frames not exceeding 1.5 Sqm including dismantling of brick work for hold fast complete all as specified and as directed.

Taking down Chowkats With shutters(without taking of shutters from the frames) or frames exceeding 1.5 Sqm but not exceeding 4 sqm including dismantling of brick work for hold fast complete all as specified and as directed.

S&F anodised aluminium window shutters with chowkhat made out hollow aluminium section suitable for aluminium shutter sliding and glazing with 5.00mm thick glass fixed with glazing clips, rubber beading and aluminium beading etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO Glass : SAINT GOBAIN/MODI GUARD/TATA CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS MEMBER SIZE : 100 X 44 X 1.60 MM THICK

S&F anodised aluminium door made out hollow aluminium section as mentioned below. Each door having 02 Nos disk or D type handle of 200 mm long , two Nos aluminium tower bolts of 200 size , one No mortice lock of six levers with key in duplicate regulated by double action hudrolic floor door spring (Make - Sandhu/Titz) shutters to be partly glazed with 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasket anodised aluminium beading screws etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO Glass : SAINT GOBAIN/MODI GUARD/TATA CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS VERTICLE STYLE : 100 X 44 X 1.60MM SHUTTERS LOCK RAIL : 150 X 44 X 1.60MM SHUTTERS BOTTOM RAIL : 200 X 44 X 1.60MM

S&F Solid PVC Door frame of size 50 mm x 47mm made out of 5mm thick wooden grain printed PVC sheet reinforced with MS square tubes , supplied and fixing in opening as per specification and Drg complete all as specified and as directed.

S&F factory made solid panel PVC wood grain printed door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixed in the frame at site complete as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

S&F butt hinges stainless steel 100mm long medium weight etc complete all as specified and directed.

S&F aluminium anodised extruded fabricated type handle 150mm long etc complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section and fixed etc complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm screed bed in CM 1 : 4 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing etc complete all as specified and directed.

All as per BOQ srl Item No. 16.00 here-in-above but on vertical surface such as dado, skirting etc over 10 mm thick screed in CM 1:4 , complete all as specified and directed.

Taking up or down steel tubing and connections, for refixing or removal from site for 15mm bore pipe, complete all as specified and directed.

Taking up or down steel tubing and connections, for refixing or removal from site for 20mm bore pipe, complete all as specified and directed.

S&F, 15 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors complete as specified and directed.

S&F, 20 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors complete as specified and directed.

S&F in repairs CONCEALED stop cock of 15mm bore reduced body etc complete all as specified and directed.

S&F in repairs angular stop cock of long thread 15mm bore complete all as specified and directed.

S&F in repairs 15mm bore brass chromium plated fancy type hot and cold wall mixture (wall mounted model ) with telephonic shower and telephone fixed complete all as specified and directed.

S&F in repairs 15mm bore brass chromium plated fancy type central hole basin mixture w/o pop up waste system with 450mm long braided hoses etc complete all as specified and directed.

S&F in repairs, 15 mm bore pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe as specified.

S&F in repairs, 15 mm bore pillar taps, fancy type Swan neck, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs, 15 mm bore Bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15 mm bore Bib taps, fancy type, long body with wall flanges cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, brass chromium plated fancy type towel rail 600mm long complete all as specified and directed.

S&F in repairs, vitreous china urinal , half stall type white with gratings, union for discharge pipe , flush pipe and waste pipe , CP urinal spreader fixed to water supply pipe etc complete all as specified and directed.

S&F in repairs, vitreous china urinal partition ,white of size 310 x 700mm etc complete all as specified and directed.

S&F in repairs coloured oval type wash hand basin, size 550x400 mm, wliile, flat back, iron (for Hospital use) excluding taps, waste, chain and plug and porcelain stopper but including brackets waste pipe 32mm, coupling etc fixed as in counter slab etc complete all as specified and directed .

S&F in repairs Toilet paper holder, cast copper alloy, chromium plated fixed in position, complete all as specified and directed.

S&F in repair Cast copper alloy, chromium plated soap dish, complete all as specified and directed.

S&F in repair CP grating of size 125mm complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedestal pattern white excluding fixing bolts , flushing cistern and flush pipe complete but including PVC seat cover with aluminium hinges devices & EWC jet chromium plated with 1.00 mtr long PVC connection pipe complete all as specified and directed.

S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories required complete all as specified and directed..

S&F in repairs, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete all as specified and directed.

S&F in repair brass ball/float valve with PVC ball complete suitable for 20mm bore pipe complete all as specified and directed.

S&F in repairs PVC connection 60cm long with brass check nuts on both sides suitable for 15mm bore pipe etc complete all as specified and directed.

Dismantling old unserviceable RCC/PVC water tank of capacity exceeding 250 but not exceeding 500 ltrs capacity including supply and fixing PVC water storage tank of 500 ltrs capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm GI pipe connection including locking arrangement with ball valves high pressure with epoxy coated aluminium rod and high density plastic ball fixed as in repairs complete all as specified and directed.

Taking down cement plaster on brick wall including racking out joints,soffits of slabs/chajja/sunshaded hacking for keys, scrubbing down with water etc complete as directed.

M&L for rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:4 mixed with WPC @ of 3% by wt of cement finished even and smooth without using extra cement complete all as specified and directed.

Supply only Dr fixit integral WPC /liquid complete all as specified and directed.

M&L for preparing newly plastered surface of walls and applying two coats of exterior acrylic paint (water based) over a coat of primer in camouflaging pattern of any shade and pattern complete all as specified and directed.

M&L for preparing newly plastered surface and applying two coats of distemper oil emulsion over a coat of 3mm putty complete all as specified and directed.

M&L for taking out axle from wheel , taking out bearing remettaling & straining shaft making 2 Nos hearing sheets , washing tearings with kerosene oil applying greasing including replacement of decayed/rusted ball bearing and rails as per site requirement and refixing bearing on shaft and assembling fixing rails wheel complete all as specified and directed. Note : Rate shall be deemed to include all T&P required for necessary repair incl bolts , screws etc complete to make good all as directed.

Dismantling of plain or corrugated steel sheeting any guage , thickness, including Nainital or similar pattern from roof covering complete all as specified and directed.

S&F pre painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as specified complete all as specified and as directed.

M&L for preparation of plastered or unplastered surfaces of walls and applying one coats of distemper oil emulsion on old surfaces upto any height including necessary scaffolding as required, complete all as specified and directed.

M&L for complete removal of existing treatment from old decorated plastered surface of wall and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying one coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge, Note: Sample of camouflage pattern to be approved as per the user requirement by GE

M&L for complete removal of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying two coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and any size over a coat of primer complete all as specified and directed by Engineer-in-charge. Note: Sample of camouflage pattern to be approved as per the user requirement by GE

M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete concrete surfaces complete all as specified in SSR Part - I clause 14.22 complete all as specified and directed. Note : Rough cast finish to be as below :- After applying the under coat of cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with course sand and cement in the ratio of 1 : 1 : 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger agg are thoroughly covered.

M&L for preparation of newly plastered surfaces and applying two coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and to any size, over a coat of primer, complete all as specified and directed by Engineer-in-charge. Note: Sample of camouflage pattern to be approved as per the user requirement

Hacking out old broken glass (any thickness) size , qauality or description from wooden/steel frames etc complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in square not exceeding 0.5 sqm each panes complete all as specified and directed.

SWAMI ENGINEERS (BID ID -3346621)