Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.6 Cr
EMD Value
₹1.6 L
Closing Date
20 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Capital Project Division No.1, Gandhinagar
CONSTRUCTION OF NEW CHIP TYPE SHOPS AT GANDHINAGAR ,DIST -GANDHINAGAR.
364015
TENDER NOTICE NO.36/1 of 2026-27
Open
Civil - All
Works
Gandhinagar
7 documents required · 7 mandatory
₹3,600
Executive Engineer, Capital Project Division No.1, Gandhinagar.
₹1.6 L
6 Nov 2026
6 Nov 2026
6 Nov 2026
20 Nov 2026
6 Nov 2026
90 days
Name of Work :- CONSTRUCTION OF NEW CHIP TYPE SHOPS AT GANDHINAGAR ,DIST -GANDHINAGAR
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
Rate in Figures
Rupees One Hundred
Excavation for foundation Upto 1.50 mt. Depth in Loose or soft soil including sorting out and
1 609.00 Cum 123.13 Twenty Three And Paise
stacking the excavated stuff with all lead and lift.
Rupees One Hundred
Excavation for foundation From Depth 1.50mt to 3.0mt in Loose or soft soil including sorting out and
2 137.00 Cum 136.30 Thirty Six And Paise
stacking the excavated stuff with all lead and lift.
Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations
Rupees One Hundred
etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and
3 506.00 Cum 136.92 Thirty Six And Paise
watering with all lead and lift.
Ninety Two Only
Rupees Two Hundred
Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including
4 162.00 Cum 277.14 Seventy Seven And Paise
watering, ramming and consolidating etc. complete with all lead and lift.
Filling in plinth with sand under floors including watering ramming, consolidating and dressing Rupees Four Hundred
5 55.00 complete with all lead and lift. Cum 481.70 Eighty One And Paise
Providing and laying of permanent piping technology anti-termite treatment before floring work by
installing LLDP(Low linear desity polyetalling)tube of 8 mm O.D & 6.4 mm I.D with inbuilt pressure
compensation chip every 30 cm interval in the tube,having working pressure of 2 Kg/cm2 and release
rate of 1.9 1tr/hour fixed by installed at the entire periphery of the building and at a depth of 20 to
mm under floor at every 2 to 3 mtr. c/c distance(adjusted as per building layout)&Ends of loop pass
Rupees One Hundred
through a PVC elbow of minimum 32 mm ID at junction box of wall and floor level,entering into a
6 854.00 Sqm. 134.33 Thirty Four And Paise
steel reinforced grooved flexible pipe of minimum 22 mm ID leading into junction box and the loop
Thirty Three Only
shall terminate in junction boxes & test every junction during injecting chemicals for termite control
treatment. The anti-termite chemical lmidacloprid 30.5% SC mix as perIS-6313(part III)shall be
injected by the pressure pump diluted with water 10.5 ml/5 1tr of water at the rate of 2 Kg/sq.cm@
ltr/SMT. The contractor shall submit approved line plan for piping system and junction boxes duly
approved by Engineer-in—Charge with bond of 5 year warranty.
Providing and laying in position Controlled Cement Concrete Mixed M-150 grade concrete for
reinforced cement conctere work in Foundations,& Plinth, using cement content as per approved
Design Mix grade for reinforced cement concrete work , excluding the cost of reinforcement and
Rupees Four Thousand
including cost of centering shuttering finishing and admixtures in recommended proportions as per IS:
7 86.00 Cum 4236.50 Two Hundred Thirty Six
9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and
And Paise Fifty Only
durability as per direction of the Engineer -In - Charge. Without Fly Ash (Min cement level as per
latest IS 456 shall be maintained).
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
Rate in Figures
Providing and laying in position Controlled Cement Concrete Mixed M-200 grade concrete for
reinforced cement conctere work in Foundations,& Plinth, using cement content as per approved
Design Mix grade for reinforced cement concrete work , excluding the cost of reinforcement and
Rupees Six Thousand
including cost of centering shuttering finishing and admixtures in recommended proportions as per IS:
8 453.00 Cum 6046.01 Forty Six And Paise One
9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and
durability as per direction of the Engineer -In - Charge. Without Fly Ash (Min cement level as per
latest IS 456 shall be maintained). for all floors, lifts and levels for footings,Plinth beams,Floor Beam,
columns, retaining walls, slabs, chajjas, lintels,Plinth slab and all concrete members etc.
Providing and laying cement concrete 1:3:6 (1- Cement :3- Coarse sand : 6- Graded brick bat
Rupees Three Thousand
aggregate 40mm normal size) and curing complete excluding cost of formwork in (A) Foundation and
9 159.00 Cum 3043.36 Forty Three And Paise
Thirty Six Only
Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with
Rupees Six Hundred
grade of concrete M20 pnumatic compressed / vibrated mechanically and as per approved design
10 693.00 Sqm. 613.26 Thirteen And Paise
Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand
Twenty Six Only
in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.
Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm
Rupees Three Hundred
length,30cm height and 15cm thick of M250 grade concret as per approved design and including
11 303.00 Rmt 374.92 Seventy Four And Paise
excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc
Ninety Two Only
Rupees Seventy Seven
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing
12 58600.00 Kg. 77.29 And Paise Twenty Nine
in position complete upto all floor level
Rupees Four Thousand
Brick work using common burnt clay building bricks having crushing strength not less than
Two Hundred Forty Four
13 51.00 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Cum 4244.85
And Paise Eighty Five
Conventional Up to plinth Level
Brick work using common burnt clay conventional building bricks having crushing strength not less Rupees Four Thousand
14 284.00 than 35 Kg/sqcm. in super structure for All floors in cement mortar 1:5 ( 1 cement : 5 fine sand ) Cum 4533.57 Five Hundred Thirty Three
including curing etc. complete. And Paise Fifty Seven Only
Providing 10 mm. thick cement plaster in single coat on brick/concrete wall ceiling for interior
Rupees One Hundred
plastering finished even and smooth for All floor including curing etc. complete. In Cement mortar 1:3
15 1365.675 Sqm. 185.92 Eighty Five And Paise
(1 cement : 3 fine sand)
Ninety Two Only
Providing 15 mm. thick cement plaster in single coat malla on rough side of half brick wall for interior
Rupees One Hundred
plastering finished even and smooth for All floor level including curing etc. complete. in Cement
16 2135.00 Sqm. 185.41 Eighty Five And Paise
mortar 1:3 (1 cement : 3 fine sand)
Providing cement vata (10 mm. x 10 mm. size) quarter round in cement mortar 1:1 including neat
Rupees Twenty Four And
17 367.00 cement finishing, watering etc. complete. Rmt 24.28
Paise Twenty Eight Only
20 mm. thick exterior sand face Gutaka Finished cement plaster (with 1x1 cm groove at junction of
Rupees Three Hundred
structural member) on walls for all floors consisting of 12 mm. thick backing coat of C.M. 1:3 (1
18 1169.00 Sqm. 315.69 Fifteen And Paise Sixty
cement : 3 sand) and 8 mm. thick finishing coat of C.M. 1:1 (1 cement :1 sand) etc. complete for all
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
Rate in Figures
Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on
undecorated wall surface to give an even shade including throughly brushing the surface free from
mortar droppings and other foreign matter and sand papered smooth including approved brand and Rupees One Hundred
19 3501.00 manufacture on new wall surface to give an even shade including thoroughly brushing the surface free Sqm. 123.78 Twenty Three And Paise
from mortar dropping and other foreign matter and sand papered smooth including two coats of acrylic Seventy Eight Only
lappy putty and one coat of primer of approved brand etc complete on celing, wall, stair soffit, etc.
complete. For all floor as approved by Engineer in charge/Architect.
Finishing wall with two coats & one coat of primer of weather proof exterior emulsion paint water
proof & weather proof, external paint apex including one coats of primer of approved brand on wall Rupees One Hundred
20 1169.00 surface to give an required shape even shade after thoroughly brushing the surface to remove all dirt, Sqm. 120.26 Twenty And Paise Twenty
and remains of loose powdered materials. etc complete. For all Floor as approved by Engineer in Six Only
charge/Architect.
Providing and fixing chiken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at
junction the Brick.masonary and reinforcement cement concrete member including fixing
Rupees One Hundred Ten
21 331.00 materials scaffolding labour etc. complete junction of 2 different surfaces of different material Sqm. 110.09
And Paise Nine Only
component at the time of plastering to prevent cracking in plaster surface as and where directed at all
floors with all leads and lifts etc.complete.
Providing and laying Hand dressed Mirror polished Blue Kota stone slab flooring of even Grade over
18-20mm (Average) thick base of cement mortar1:6 (1-cement: 6-coarse sand) or L.M.1.1.5(1-Lime Rupees One Thousand
22 605.00 putty:1.5-coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the Sqm. 1019.39 Nineteen And Paise Thirty
shade of slab including rubbing and polishing etc. complete. (A) 23-25mm thick as approved by Nine Only
architect/Enginner in charge /Architect.
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment
to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir,
sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio
of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral
crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal)
Rupees Four Hundred
side with the help of synthetic fibre brush. The material shall meet the requirements as specified in
23 562.00 Sqm. 470.41 Seventy And Paise Forty
ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control
concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline
slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried
out all complete as per specification and the direction of the engineer-in-charge. The product
performance shall carry guarantee for 10 years against any leakage. 22.23.1 For vertical surface two
coats @ 0.70 kg per sqm per coat
Providing and laying broken chaina mosaic tiles flooring over avg 50mm C.C.1:2:4 {1Cement :
sand: 4Kapachi /Gritt 6 to12 mm size} bedding for maintaining slope for plain and curve surface &
12mm to 20 mm of broken piece of seramic / glazed tiles (one for more color as directed) to be laid
over cement mortar bedding of C M1:3 (1cement:3sand) containg one Kg of water profing materials Rupees One Thousand
24 638.00 per bag of OPC at plain or / and slops and to be tempered to bring mortar ceramic up to surface with Sqm. 1198.09 One Hundred Ninety Eight
using white cement and colour pigment including rounding of junctions and extending them upto And Paise Nine Only
15cm along the wall (i.e 15cm radius vata of same material) and curing with bends any pattens or
designas per drawing and cleaning by using oxalic acid etc complete.
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
Rate in Figures
Providing and laying 16 to 18 mm thick polished Black Granite stone slab machine cut in single
Rupees Two Thousand
piece in sill and jambs laid on 10 mm thick cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) laid
25 35.00 Sqm. 2845.17 Eight Hundred Forty Five
over and jointed with grey cement slurry incl. rubbing and polishing etc complete as per approved
And Paise Seventeen Only
by Engineer in charge /Architect.
Providing and fixing Safety grills of required pattern for windows/Ventilation 16 mm dia bars at
Rupees One Hundred
required spacing and Rectangle pipe/M.S. Flats for frame and intermediate supports at required
26 540.00 Kg. 120.19 Twenty And Paise
spacing as per design and hold fasting with coach bolts including one coat of primer and two coats of
matt finished oil painting etc complete.
Providing and fixing standard extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm @ Wt Rupees One Thousand
27 22.00 1.094Kg / Rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour Sqm. 1525.00 Five Hundred Twenty Five
tinted float glass as details etc complete for Fix window. Only
Place Identification Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm
ACP (Aluminum composite Panel); size 150x90 cms. rectangular as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats
of best quality epoxy paint ; reflectorised with High Intensity Prismatic Grade retro refiectivesheeting
of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand post of
Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable Rupees Twelve Thousand
28 6.00 size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. Nos 12341.52 Three Hundred Forty One
The details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at And Paise Fifty Two Only
site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing
etc.complete under the supervision of engineer in charge. A warranty for 7 years for the Retro
reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report
from third party test lab for the product offered shall be submitted by contractor. (B) Class-B Type-4
Retro Reflective sheeting
Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked
together through their entire length and jointed together at the ends by end locks Rupees Three Thousand
29 238.00 mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for Sqm. 3554.40 Five Hundred Fifty Four
inside and outside locking with push-pull operation including the cost of hood cover and spring etc. And Paise Forty Only
complete.(A) Shutters having width below 3.5 M.
Providing and fixing 3 mm thick acrylic sheet signage for shop numbering, of size 0.60 m × 0.15 m,
with digitally printed / vinyl-cut shop number and required lettering as per approved design, including Rupees Two Thousand
30 4.00 surface preparation, cutting, edge finishing, printing/vinyl application, necessary adhesive, mounting Sqm. 2381.08 Three Hundred Eighty One
accessories, screws/fasteners and fixing complete in all respects, as per detailed drawing, approved And Paise Eight Only
sample and as directed by Engineer-in-Charge.
Applying priming coat over new steel and other metel surface after and including preparing the surface
Rupees Thirty Six And
31 594.00 by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel Sqm. 36.42
Paise Forty Two Only
wood, scrapers and sand paper with ready mixed priming paint brushing red lead.
Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint,
Rupees Ninety Two And
32 594.00 brushing, interior to give an even shade including cleaning the surface an even shade including Sqm. 92.20
Paise Twenty Only
cleanicn the surface of all dirt, dust and other foreign matter.
Providing and laying cement concrete flooring 1:2:4 (1- cement : 2-coarse sand : 4-graded stone Rupees Three Hundred
33 313.00 aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (A) Sqm. 315.69 Fifteen And Paise Sixty
40mm thick. Nine Only
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
Rate in Figures
Providing and fixing approved make Godrej NavTal brass padlock, 75 mm size, 7-lever locking
Rupees Two Hundred
mechanism, heavy-duty brass body, complete with hardened steel shackle, internal locking mechanism
34 72.00 Nos 246.08 Forty Six And Paise Eight
and required set of keys, including all necessary accessories and fixing, complete in all respects as
directed by Engineer-in-Charge.
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the Rupees Three Hundred
35 90.00 following outside Dia. Low densidy, complete with special falnge compression type fittings, wall Rmt 339.05 Thirty Nine And Paise
clipsetc. including making good the wall ceiling and floor.(G)110 mm Five Only
total Civil Amount (A)=
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 kV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below
type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of Rupees Five Hundred
36 144.00 following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with pts 539.34 Thirty Nine And Paise
textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with Thirty Four Only
necessary Lamp holder/ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC
pipe and accessories erected flushed on wall/ceiling complete Cat-III
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked
1.1 kV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of
pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator Rupees Seven Hundred
37 36.00 mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden pts 765.58 Sixty Five And Paise Fifty
box, single mounting base frame covered with textured/metallic/white front plate modules erected on / Eight Only
in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.(a) with
medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete Cat-III
Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /
Rupees Three Hundred
38 36.00 Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate pts 309.06
Nine And Paise Six Only
modules erected on / in wall / ceiling with following type accessories Cat-III
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box,
single mounting base frame covered with textured / metallic/white front plate , modules erected with Rupees One Hundred Fifty
necessary connections as per site situation directed by Engineer In charge.(1)One No. SP 6 Amp. Cat- One And Paise Fifty Only
Rupees One Hundred Fifty
40 108.00 (2) One No 5 pin plug Cat-III Nos. 151.50
One And Paise Fifty Only
Rupees Twenty Five And
41 72.00 (7) Blank Plate Single Cat-III Nos. 25.25
Paise Twenty Five Only
Rupees One Hundred
42 36.00 (9) 16 Amp. SP one way switch Cat-III Nos. 180.79 Eighty And Paise Seventy
Rupees One Hundred
43 36.00 (10) 6/16Amp. Universal socket Cat-III Nos. 199.98 Ninety Nine And Paise
Ninety Eight Only
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be
Rupees Thirty Three And
44 150.00 erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with Mtr. 33.33
Paise Thirty Three Only
adhesive solution & Clamps with following dia of pipes, in approved manner as directed (b) 25 mm
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
Rate in Figures
Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Rupees Twenty One And
Check-nuts etc. complete of following sizes.(2) 25 mm Paise Twenty One Only
Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 Rupees One Hundred Four
sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of And Paise Three Only
following size (A) With medium class Rigid PVC pipe and accessories(b) 2 wire 2.5 sq. mm
providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked stranded Copper
Rupees One Hundred
conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper
47 252.00 Mtr. 140.39 Forty And Paise Thirty
conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size
(A) With medium class Rigid PVC pipe and accessories(A) 2 wire 4 sq. mm
Rupees One Hundred
48 540.00 (b) 2 wire 6 sq. mm Mtr. 184.83 Eighty Four And Paise
Eighty Three Only
providing and erecting Mains with ISI marked, 1.5kV grade electrolyte multi stranded, annealed
Rupees One Hundred
copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing
49 180.00 Mtr. 115.14 Fifteen And Paise Fourteen
pipe of following size (Specifically for control panel, relays, power switchgears, motor starters &
control wiring) with required size of copper lugs, nuts and bolts if required.(f) One wire 10.00 sq. mm
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on
single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:
513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser
with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K, Rupees Three Hundred
50 108.00 Luminaire efficacy> 85 lumens/watt ,LED Nos. 373.70 Seventy Three And Paise
LED driver efficiency > 85 % Seventy Only
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of
Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the
ranges shown.)(A) Tube Light with integral driver(iv) 22-24 Watts, Surge - 2kV,IP-20, conventional
providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V Rupees One Hundred
51 144.00 A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS Nos. 123.22 Twenty Three And Paise
8828/1996 with ISI Mark Twenty Two Only
Rupees One Hundred
52 36.00 Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB. Nos. 176.75 Seventy Six And Paise
Seventy Five Only
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 Rupees Eight Hundred
53 36.00 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB Nos. 885.77 Eighty Five And Paise
to be used) suitable for(A) single phase incoming and horizontal single phase outgoing(b) sheet steel Seventy Seven Only
double door (IP-43)(ii)6 way
Supplying & erecting Sheet Steel powder coated Cable end termination Box to be mounted on Top or Rupees Two Hundred
54 36.00 Bottom of the MCB Distribution Box for housing/covering Extra wires & Cables, suitable for Nos. 291.89 Ninety One And Paise
following size of MCB DB Box. (B) Single Phase 6 Way Eighty Nine Only
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
Rate in Figures
providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of
Rupees Two Thousand
mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase
55 72.00 Nos. 2458.34 Four Hundred Fifty Eight
V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate
And Paise Thirty Four Only
any electronic component. for following Max. rating erected as directed(ii) 40Amps. DP Cat-III
Rupees Seventy Seven
56 36.00 Providing and erecting HOT deep Galvanised iron strip/wire 4.064mm to 1.626mm. Kg. 77.77 And Paise Seventy Seven
Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having
200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded
by highly conductive compound with high charge dissipation suitable for following type of
applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test
Rupees Four Thousand
certificate including value of earth resistance of installation duly stamped and signed by agency and
57 36.00 Nos. 4591.46 Five Hundred Ninety One
officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having
And Paise Forty Six Only
back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing
as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back
fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary
test report must be submitted by Agency. (a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan with double ball bearing Rupees One Thousand
ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with Nine Hundred Forty Eight
aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be approved by And Paise Twenty Nine
Engineer in charge)) Only
Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring Rupees Two Thousand
59 36.00 mounted low noise operation suitable for medium duty having following dia size and maximum speed Nos. 2054.34 Fifty Four And Paise
in RPM[A] 300-305 mm dia 900 RPM Cat-II Thirty Four Only
total Electrical Amount (B)=
Total Amount (A)+(B)=( C)
Total Amount (A)+(B)=( C)
In Words: Rupees One Crore Sixty One Lacs Forty Two Thousand Five Hundread Seventy Paise Seventy Forty Three Only
*Estimated Amount *Estimated Amount
Put to Tender 16102570.43 Put to Tender
Deduct:..........%Below Add:............%Above
*(Please strike out whichever is not applicable.)
1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.
Quantity Item Description Unit Total Amount
Quantity Item Description Unit Total Amount
Rate in Figures
2.The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.
3.GST and Income tax TDS will be deducted at a source while making payments of bills.
4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.
items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
5. All the works shall be carried out as per Public works Department Hand Book and other Specification of the Division or as directed
6. Rate of Dismantled material shaal be deducted from bill at the rate mentioned in attached statement here if all over tender will be below than the estimated cost.
7.In case of Tender Quoted above the rate than estimated cost of dismantled item will be increased by percentage quoted by agency.
8. I/We hereby declare that, I/We have carefully studied conditions of contract, Specifications & Other documents of this work and agree to execute that same accordingly.
Quantity, rates & working of items are as per estimates and calculation in the schedule "B" are arithmetically checked and found correct.
Deputy Executive Engineer Executive Engineer
Sign of Contractor
Capital Project Sub Division No.24 Capital Project Division No.1
Gandhinagar Gandhinagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01 NIT.pdf
02 SBD Form.pdf
03 Schedule B.pdf
04 INDEX SPECIFICATION.pdf
05 CIVIL SPECIFICATION.pdf
06 TEST SCHEDULE.pdf
07 MOU Electrical Work 1 300 Stamp.pdf
08 Conditions For Nominated Electrical Contractor.pdf
02 Testing Schedule Dt.24-10-1994.pdf
03 Standards for Cement Con. Dt.11-5-2017.pdf
04 GR Regarding Laplength in Reinforcement Dt.15-2-2017.pdf
05 Single Tender GR Dt.18-2-2017.pdf
06 FD Circular No 1097 GST Dt.15-9-2018.pdf
07 DEFECT LIABILITY PERIOD GR.pdf
08 RMC (Dt.15-07-2023)for above 5 cr works.pdf
09 COMPUTERISED MB GR Dt.1-2-2017.pdf
10 Call before U Dig-Application.pdf
01 BUILDING SPECIFICATION PART-I.pdf
02 BUILDING SPECIFICATION PART-II.pdf
03 BUILDING SPECIFICATION PART-III.pdf
04 BUILDING SPECIFICATION PART-IV.pdf
05 Technical Specification Electrical.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .