REPAIR/REPLACEMENT OF INTERNAL WIRING INCL SUB MAIN WIRING, MCB DBS, BLDG SECURITY LIGHTS AND CONNECTED ITEMS IN POCKET 7 AND 8 UNDER GE ROORKEE

Amount

Taking down any type point wiring (light, fan, socket or power) complete, incl fixtures and fittings like swithes, ceiling rose, pendant, regulator, sockets, light fitting (Mirror light, Bulk head, LED Panel 2''x2'', security light, wall fitting, down light, flood light, post top lantern) etc complete all as specified and directed.

Taking down existing unserviceable sub main wiring of any description complete all as specified and directed.

M&L for point wiring including with 1.5 Sqmm FRLS-H insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS-H insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit and its all accessories/junction boxes/inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG/with earth dolly of suitable size concealed in wall and covered with 3mm thick phenolic laminated hylam sheet fixed with brass screws for mounting switches, sockets, fan regulator, etc/modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for the following points:-

One light/ceiling fan/exhaust fan/call bell point controlled by one switch.

One 6A socket point controlled by one switch on independent board.

One 6A socket point controlled by one switch on same board.

One light point controlled by two No two way switch complete all as specified and directed.

-Ditto- all as per here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires.

-Ditto- all as per item No 3 above here in before but wiring in existing conduit for the following type :-

One light / ceiling fan / exhaust fan / call bell point controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

One light point controlled by two No. two way switch complete all as specified and directed

-Ditto- all as per item No 3.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires.

M&L for sub main wiring along with earth wire with FRLS-H insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed for the following sizes :- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length)

2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm (earth wire)

2runs x 6 sqmm(Ph & N) + 1run x 6 sqmm (earth wire)

4runs x 10 sqmm(Ph & N) + 1run x 10 sqmm (earth wire)

Supply and fix switch piano flush type 6 Amps, one way, 240V, 50Hz, complete all as specified and directed

Supply and fix socket 6 Amps, 2-in-1 flush type universal 240V, 50Hz, complete all as specified and directed.

Supply and fix switch piano flush type 16 Amps, one way, 240V, 50Hz, complete all as specified and directed.

Supply and fix socket 16A & 6A, 2-in-1 flush type universal 240V, 50Hz, complete all as specified and directed

Supply and fix electronic socket type fan regulator rotary type in 5 steps, 240V, 50Hz, complete all as specified and directed.

S&F switch piano flush type white finish 5/6 Amps, single pole two way, 230 volts, 50Hz complete all as specified & directed.

Supply and fix bell push switch flush type 6 Amps, 240V, 50Hz , complete all as specified and directed

Supply and fixelectric call bell ding dong type, AC, 240V, 50Hz, complete all as specified and directed

Supply and fix Modular switch 1 way 6A, 1 module 240V, 50Hz complete all as specified and directed.

Supply and fix Modular switch 1 way 16A, 1 module 240V, 50Hz complete all as specified and directed.

Supply and fix Modular Socket, 6A-2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.

Supply and fix Modular Socket 6A/16A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.

Supply and fix Modular Socket Type fan regulator step type in 5 steps, 240V, 50Hz complete all as specified and directed.

Supply and fix in replacement of Modular Bell push 6A 1 module, 240V, 50Hz complete all as specified and directed.

Supply and fix Modular blank plate 1 module complete all as specified and directed.

Supply and fix in replacement ceiling rose in poly carbonate 3 terminal brass, flush type 6 Amps, 220 volts AC, ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed.

Supply and fix in replacement of Lamp holder, angle type with metal ring, PVC/Polycarbonate body type B-22 with back plate complete all as specified and directed.

S & F in replacement of old unserviceable LED bulb 9 watt, 6500K, 1200 lumen, ISI marked, as per standard specifications complete all as per specified and directed.

S&F in replacement of T-8 LED tube rod 20 watt (4 feet) retrofit Polycorbonate body, full white to be fixed on existing T-8 LED batten complete all as specified and directed.

S&F in replacement of old unserviceable LED T5 tube light fitting 20 watts with polycarbonate housing and polycarbonate diffuser with integrated electronic driver with all accessories including connecting up with PVC insulated and PVC sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.

S&F in replacement of old unserviceable LED mirror light fitting Integral slim LED batten Integral 9/10 watts of 2 feet long internally prewired complete with all accessories and including connecting up with PVC insulated and PVC sheathed twisted two core wire of suitable size complete all as specified.

S&F in replacement of recessed mounted LED panel light 2'x2' size, 36 watts, full white/warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP/Amstrong/grid false ceiling complete with all fixing accessories including making electrical connection with PVC insulated and PVC sheathed twisted two core wire of suitable size complete all as specified and directed.

S&F in replacement LED bollard light 9/10 Watt CDL/WW made out of pressure die cast powder coated housing with PC diffuser with LED as a source light including making electrical connection complete all as specified and directed.

Supply and fix in replacement of slim round/square recessed /surface mounting LED down light 15 W suitable size, with aluminium die-cast body, finish with drop down PC diffuser warm/full white with optimized heat sink for efficient dissipation including taking down existing unserviceable light fitting of any description complete all as specified and directed.

Supply and fix in replacement of ventilating/PVC exhaust fans fancy square type 225/250mm sweep with plastic fiber body heavy duty 230 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan & making good including making electrical connection with ceiling rose complete all as specified and directed.

Supply and fix in replacement of LED building security light fitting 25 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 40 mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps (02 Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core PVC insulated and PVC sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.

Supply and fix in replacement of old unserviceable LED Flood light fitting 50 watt capacity with SMD LED pressure die-cast aluminium housing with reflector including making electrical connection with PVC insulated and pvc sheathed twisted three core wire of suitable size complete all as specified and directed.

S & F in replacement of old unserviceable LED Highbay light fitting 100 watt capacity with PDC aluminium housing with reflector including making electrical connection from ceiling rose to light fitting complete all as specified and directed.

Supply and fix in replacement of old unserviceable LED Post Top Lantern light fitting 30/35watt with LED as source light & tranparent diffuser and fixing arrangement on new GI Pipe medium grade of dia 40 mm duly grouted on wall/brick pillar with the help of cement mortar including making electrical connection with PVC insulated and PVC sheathed twisted three core wire of size 1.0 sqmm complete all as specified and directed.

Supply and fix in replacement of old unserviceable Post Top lantern globe type light fitting of capacity 1x7/8 watts with B-22 base LED bulb, transparent polycarbonate diffuser and fixing arrangement on new GI pipe of 25/40 mm dia medium grade of length 1.5m duly grouted on ground/wall/brick pillar with the help of cement mortar including making electrical connection with PVC insulated and PVC sheathed twisted three core wire of size 0.5 sqmm from junction box to light fitting complete all as specified and directed.

Supply and fix in replacement PVC/DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof suitable for outdoor installation for Gate light and Post top lantern, fixed on wall with screw & rawal plug and on GI Pipe wth suitable size MS clamp and Nut-bolts,washer of size 150x100x60 mm complete including one connector block three terminals and PVC cable gland 02 Nos for incoming and outgoing cables with provn of 01 nos single pole MCBs 10-32 amps inside the box complete all as specified and directed.

Supply and fix in replacement of old unserviceable twin core of flexible wire of size 23/0.0076 with PVC medium grade pipe 20mm dia for connection of post top lantern fitting from one junction box to other junction box complete all as specified and directed.

Supply and fix in replacement of power unit MCB protected plug and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

Supply and fix in replacement of MCCB/MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately.

Supply and fix in replacement of MCB distribution board, TPN, 4 way, 415 V, 3 phase, AC in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. Note: MCBs shall be measured and paid separately.

All as per item No. 42 here-in-before but SPN, 8 way, 230 V, 1 phase, AC.

All as per item No. 42 here-in-before but SPN, 4 way, 230 V, 1 phase, AC.

S&F MCCB 100A, 15KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed.

S&F in replacement of MCB 100 Amp, 10 KA, TPN, 'C' curve, 415 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed.

S&F in replacement of MCB 63A, 10 KA, SPN, 'C curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed.

S&F in replacement of MCB 40A, 10 KA, SPN, 'C curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed.

S&F in replacement of MCB 10 to 32A, 10 KA, single Pole, 'C curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed.

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron, UL listed, CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 30kg/pit (resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7. The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS-H insulated copper conductor of size 6 sqmm, single core cable drawn through and including suitable dia of medium grade GI pipe upto 7 mtr incl cutting and chases on wall and floor complete all as specified and directed. Note:- The rate quoted above shall be deemed to be included for excavation and earth work, refilling, removal of surplus earth and making good the surface around chemical earthing.

M&L for Circuit/submain wiring with single core FRLS-H PVC insulated copper stranded conductor cable drawing into existing PVC rigid conduit surface/concealed/casing caping as required of 1.0 Sqmm for Inverter wiring, including taking down unserviceable existing wiring etc complete all as specified and directed.

Supply and fix in replacement of 3mm thick phenolic laminated hylam sheet of size 9"X11" including necessary cutting, drilling holes for fixing of switches, sockets & fan regulators etc complete all as specified and directed. Note: Switches, sockets & regulators shall be measured and paid separately.

All as above but of size 8" X 5"

All as above but of size 5" X 5"

Supply and fix in replacement of 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor twin core, 4 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections including connecting on LT OH line/energy meter/DB etc complete all as specified and directed.

- Ditto - all as per item No 55 but of size twin core 10 sqmm

S&F Exhaust fan Steel body AC single phase 230/240 Volt of size 300 mm sweep 900 RPM complete with louvers including making whole on wall to fix exhaust fan and grouting of nut bolts etc and making good the disturbed sufaces of wall all as specified and directed.

S&F Heavy duty Exhaust fan Steel body AC single phase 230/240 Volt of size 450 mm sweep 1400 RPM, double bearing with air delivery not less than 1500 CMH complete with louvers including making whole on wall to fix exhaust fan and grouting of nut bolts etc and making good the disturbed sufaces of wall complete all as specified and directed.

Supply fix and fabricate 18mm thick prelaminated Particle board, interior grade, with screws & hinges to timber/ wood/ welded to angle iron frame for meter box, coloured and patteren as approved including hinge, locking arrangement and stainless steel bright finish handle complete all as specified and directed.

S&F in repairs, single pointed air termination aluminium rod, 12 mm dia, 300 mm long, as per standard specifications, complete all as specified and directed.

S&F in repairs, aluminium strip 25 mm X 3.15 mm complete with saddles and fixing screws etc for roof & down conductors, on wall, above ground, complete all as specified and directed.

S&F of GI strip 32mm X 6mm down on wall to edge of plinth ground level, connected to test point terminal block, complete all as specified and directed.

M&L in repairs, for test point terminal block made of gun metal or phosporous bronze size 75x75x25mm drilled & screwed including 3 Nos 8 mm dia 25 mm long hexa head screw fixed to wall and connectedd with earth strips complete all as specified and directed.

Taking down existing unserviceable service cable of any description from under ground or any location complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated multi-stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed, 25sqmm nominal cross section, 4 core in service connections as per IS 7098 (Part-1) including connecting on LT OH line/LT panel/DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

Material and labour for double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls/pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of HDPE Pipe and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

OMVIN ENTERPRISES LLP (BID ID -3354448)

M/s badrinath Traders (BID ID -3356013)

m/s rajesh bros. (BID ID -3355954)

anant enterprises (BID ID -3356689)

JAHANGIR CONTRACTORS (BID ID -3355974)

A ONE BUILDERS AND ENGINEERS (BID ID -3356465)

M/S Bharat Engineering (BID ID -3356924)

GLIBS CONSTRUCTION (BID ID -3356114)