CERTAIN REPAIRS/ REPLACEMENT OF FENCING, BOUNDARY WALL, GATE, DOOR, FLOORING, PATHWAY, PERIODICAL SERVICE PLUMBING AND JOINERY WORK INCLUDING CONNECTED MISC CIVIL WORKS TO UPKEEP E/M INSTALLATIONS UNDER AGE E/M NO. II OF GE(U-I) VISAKHAPATNAM

Amount

Demolition of stone/Brick masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for walling of stone masonary, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified and directed by Eng-in-charge.

M & L for PCC C1, 1:3:6 (Using 20 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps,seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, including slightly rounded or chamfered angles and throating and demolition of existing concrete & reinforcement complete all as specified and directed

Taking down cement plaster on wall of any descriptions including racking out joints for key scrubbing with water etc. complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar in 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement all as specified and directed by Eng-in-charge.

M & L for rendering 10mm thick in cement mortar in 1:3 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement all as specified and directed by Eng-in-charge.

M&L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in cement mortar 1:6 and finished smooth and even without using extra cement all as specified and directed by Eng-in-charge.

M & L for preparing of new or untreated plastered surfaces and applying two coats of antifungal paint over one coat of primar on walls and ceilings etc and all as specified and directed by the Eng-in-charge

M & L for preparing of new undercorated surfaces (plastered or un-plastered) by brooming down and applying 3 coat of white wash on walls including cornices all as specified and directed by Eng-in-charge.

Cutting & Cleaning of bushes/small plants, around E/M Installations and surrounding areas incl surface dressing and removing debris to a distance not exceeding 50 mtr complete all as specified.

Dismantling of structural steel work including doors gates etc of any description not otherwise provided for complete all as specified and directed.

M & L for mild steel work as in fabrication of gates, hooks and pintle hinges framed work hung as gates incl hand made sliding bolts etc. and Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 all as specified and directed by Eng-in-charge.

S & F Mild steel in , handrail half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 all as specified and directed by Eng-in-charge.

S & F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long having diameter of neck 5 to 10 cm all as specified and directed by Eng-in-charge.

S & F in repair expanded metal, any thickness or mesh, N exc 4 kg/Sqm fixed with steel or wood fillets, if any complete all as specified and directed.

S & F in repair Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel etc complete all as specified and directed.

Dismantling fencing wire mesh of any type all as specified and directed.

Supply & Fixing MS Galvanised Steel wire chain link fencing of Wire mess(Nominal Pitch of Wire) not Exc 100 mm, plain wire, Dia of Each Wire Each Way exc 2.5 mm, including line wires, with standard rails, straining bolts, etc. including provision of binding wire all as specified and directed by Eng-in-charge.

Preparation of New or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness complete all as specified and directed.

M & L for Cement concrete 1:4:8 type D-2 using 40 mm aggregate as in foundations, filling and mass-concrete complete all as specified and directed.

M & L 75 mm thick Cement concrete 1:2:4, type B-0 (12.5 mm graded aggregate) finishing the surface even & fair with out using extra cement all as specified and directed by Eng-in-Charge.

M & L 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded granite stone aggregate) as in plinth protection finished even and smooth with out using extra cement complete all as specified and directed.

Dismantling floor hearth or wall tiling and precast concrete interlocking paver block incl cement mortor bedding removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M & L for screed bed or bedding layer of mortor 15mm thick in CM 1:6 for laying floors finishes etc. complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to matchcomplete all as specified and directed.

M & L for Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.

S&F Chequered Cement concrete tiles 20 cm x 20 cm x 25 mm thick, with grey cement & pigment machine pressed; set, jointed & pointed in neat cement slurry in floors, cut & polished over and including 15mm thick screed in CM(1:6) complete all as specified and directed.

M & L Sand filling, 50 mm thick under floors or in foundations including watering and consolidation all as specified and directed by Eng-in-Charge.

S & F of Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment all as specified and directed by Eng-in-Charge.

Complete removal of existing PVC flooring on floors, clean the surface for fixing etc all as specified and directed.

S & F PVC sheets laminated plain coloured marbled mosaic or mottled finish laid with approved rubber based adhesive in floors etc of 2.0 mm thick complete all as specified and directed.

M & L for preparation of old surfaces of walls and applying one coat of white wash all as specified and directed by Eng-in-charge.

M & L for preparation of old surfaces of ceilings and applying one coat of white wash all as specified and directed by Eng-in-charge.

M&L for preparation of old painted surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion all as specified and directed by Eng-in-charge.

M&L for preparation of old painted surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of cement base paint all as specified and directed by Eng-in-charge.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) all as specified and directed by Eng-in-charge.

M & L for complete removal of old painted surfaces and applying two coats of antifungal paint over a coat of alkali resistant primer on walls etc all as specified and directed by the Eng-in-charge. Note: The rate shall be inclusive of necessary scaffolding.

M & L for preparation of old painted surfaces by washing, rubbing down and stopping paint surfaces and applying one coat of antifungal paint on walls etc all as specified and directed by the Eng-in-charge. Note: The rate quoted shall include the required scaffolding.

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames surrounding , glazed wiith puttty or fixed with beads complete all as specified and directed.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for providing Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

Mild steel TMT 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality complete all as specified and directed.

Taking down old unserviceable sign board of any type and size complete all as specified and directed.

M&L Stainless steel tubing medium grade of various diameter for fixing of Glow sign board complete all as specified and directed.

The board of various sizes made of 3M branded retro-reflective sheets (Type-IV) pasted on 3mm thick powder coated aluminium sheet consisting of all writing of letter size 100mm x 150mm of various contents and symbols on it and fixing the letter with permanent fixed, fixing material duly stencil cut by computerised process, letters having reflective glaring/visibility at night complete all as specified and directed.

Dismantalling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L Pre- painted Galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

Supply and laying of APP based polymeric membrane minimum 3mm thick reinforced with polyster non woven fabric 180 gram per Sqm over primed and prepared surface with transverse lap.Longitudional lap and end lap fully torching the joints and providing protecting layer all as per manufacture's instructions. All the materials shall be same make and application shall be done by authorised applicator according to manufacture's instruction complete over and including 15mm thick screed bed in cement mortar 1:4 including water proofing compound @ 3% by weight of cement all as per manufacture's instruction complete including removing of existing roof treatment all as specified and directed .

Cutting of saplings of any size from buildings in any situation & at any height including removal of roots from roof/wall including applying root killer chemical as per manufacturers instructions and making good disturbed portion with PCC 1:2:4 Type Bo (using 12.5 mm graded stone aggregate) incl removal of all debrish on terrace or shaft portion of Building complete all as specified and as directed.

M&L for cleaning of septic tanks,manhole and gully trap by pumping out sewage water completely removing the sludge and other materials and removing it outside MD land complete.

M&L for cleaning the blockage in the sewage line,Gully trap/Nahani trap/Floor trap completely to enable the sewage to flow freely to the next manholes,removal of sludge and other materials obtained from the sewage line to out side MD land .

Repairs to aluminium door and windows including taking down,facing of beading complete all as directed.( Any extra material incorporated will be measured and paid separately).

Repairs to steel rolling shutters including taking down & refixing and greasing etc complete all as directed. (Any extra material incorporated will be measured and paid separately).

M & L hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed.

Taking down Chowkhats or frames with shutter not exc. 1.5 sq. m each all as directed.

Ditto all as per item No. 60.00 but exceeding 1.5 Sqm.

Taking down Shutters of any description n exc 1 sq. m each all as directed.

Ditto all as per item No. 62.00 but size exceeding 1Sqm and n.exc 2 Sqm.

Ditto all as per item No. 62.00 but size exceeding 2 Sqm.

S&F 125x60mm pressed steel frames for doors and windows with one or more rebates including necessary fixing lugs, hinges, luck strike plate etc complete as specified.

S&F 165x60mm pressed steel frames for doors and windows with one or more rebates including necessary fixing lugs, hinges, luck strike plate etc complete as specified.

S&F 35mm thick glazed and skelton shutters with 2nd class hard wood open rebated and prepared to receive glass /gauge etc with sash bars devided into squares, with plain chamfered or rounded, mitreated and rebated sash bars any numbers all as specified.

M&L for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay,complete with glazing bars,dovetailed or welded.

M & L for Steel ventilators with centre hung shutter including hinges,steel peg stay, complete.

S&F second class hardwood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 2nd class hard wood 40mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venered particle baord with commercal veneering on both faces. The sizes of rail and stile as per IS 1003 (Part I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 75 mm long medium weight, stainless steel butt hinge complete all as specified and as directed..

S&F[ ISI marked ] 100 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F [ ISI marked ] 200 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F ISI marked ] 100 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F [ ISI marked ] 125 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repair of Door closer hydraulically of aluminium body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repairs Rotational moulded polyethylene water storage tanks, 500 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed.

All as per item No.81.00 above but 20 mm bore .

Cutting chases, pinning in, making good to facings where required and pointing in CM 1:3 in brick wall for concealed water tubing, cutting not exc 10cm girth complete all as specified and directed.

S & F 15 mm bore G.I tubes medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and dircted. Make : JINDAL/TATA/Bansal.

All as per item No.84.00 above but 20 mm bore.

S & F in repair 15 mm bore bib taps cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes as fixed in repairs complete all as specified and directed.

S & F in repair 15mm bore angle cock/Stop cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes as fixed in repairs complete all as specified and directed.

S & F in repair 15mm bore Pillar cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes as fixed in repairs complete all as specified and directed.

S & F in repair vitreous china squatting pan of orrisa pattern of size 580x440mm colour to match the existing surface with P & S trap front of back with intergral foot rest incl connection to trap and to flushing pipe anti syphone pipe etc complete incl making good to floor complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm(flat back or angle back type) excluding taps,waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair PVC pipes of 75 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC pipes of 110 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F in repair PVC (SWR) bends, 110 mm, any radius.

S & F in repair PVC (SWR) bends, 75 mm, any radius.

S & F in repair PVC (SWR) branch piece 110mm , single (single Y) equal or unequal of any dia complete all as specified and directed.

S & F in repair Vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern, low level with inlet , ball valve, float all as specified including necessary flush pipe as directed.

S&F in repair Vitreous China wash basin, white, flat back, size 580x450mm(for Hospilal use) excluding taps,waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F in repair Waste fittings 32/40/50 mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and directed.

S & F in repair grating doom 100mm dia of PTMT Minimum weight 25gms) complete all as specified and directed.

S & F in repair High density polyethylene pipes (HDPE) of 50mm dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S & F in repair PVC floor trap of 50mm dia complete.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Eng-in-charge.

S & F in repair of steel rolling shutters of thickness 1.25mm of laths in mm with out ball bearing as specified incl top cover anchoring rod hasp and staple and erected in position as indicated complete push pull or manual type complete all as specified and directed by Eng-in-charge.

S & F in repair Aluminium window and ventilator powder coated [Minimum 50 Micron thick] anodised aluminium sliding frame and shutter with 92 mm x 31.75 mm x 1.5 mm thick three track section for frames and 40 x 18 x 1.55 mm thick sliding section for shutters of both gauzed and glazed with 5 mm thick tinted glass, aluminium Deco Grill of Model / Design No. DG 102 and stainless steel wire cloth [0.63 mm nominal dia and avg width of aperture 1.40 mm] including necessary jointed, cleats powder coated glazzing clips, powder coated aluminium snap beadings, screw and aluminium fittings, suitable handle cum complete and as directed incl complete removal of old window with frame and finishing the surface complete all as directed by Eng-in-charge.

S & F in repair aluminium door shutter section verticle is 83x44.45x3 mm top and center section 95x44.45x2mm and door bottom section is 114x44.45x2mm with 5mm thick plain glass and 12mm thick prelaminated particle board (NOVAPAN) with lock, handle, tower bolt, hydraulic door closer including outer frame for door of suitable section and incl complete removal of old doors/Shutters with frame and finishing the surface even and smooth by plastering to receive the frame and door complete all as specified and directed by Eng-in-Charge.

S&F in repair Aluminium decorative grill for windows complete including removing existing grill all as specified and directed by Engr-In- Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed in ground complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth r broken rubble mixed with arth around, in layers not exceeding 25 cm complete all as specified and directed by Eng-in-charge.

M&L Cement concrete type B2 (1:2:4) using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed by Eng-in-charge.

Taking down copper/aluminium point wiring (light,fan,socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors etc.

Point wiring with 1.5 sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable with earth contunity conductor of 1.5 sqmm PVC insulated copper in and including rigid PVC conduit with conduit accessories / PVC Casing capping with casing capping accessories fixed to the surface of the roof/walls etc., including terminal boxes made out of 1.6 mm thick MS sheet for switches, fan regulators socket outlet etc along with 3 mm thick top laminated bakelite sheet for housing switches, sockets, regulators etc for the following all as directed. Make: (i) Wires: Havells / Finolex / Nicco / KEI / Polycab / RR Kabel Ltd. (ii) PVC Conduit/ Casiing caping : Presto Plast / Finolex / Kalinga / Payal

(a) One Light Point/ Fan point Controlled By One way switch

(b) One 5 Amps socket controlled by one switch on independent board

(c ) One 5 Amps socket controlled by one switch on same board

S&F One 5 pin socket out let, 15 Amps, on independent board ,with cables 4 sq mm size with 2.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing all as directed.

S & F in replacement of existing any FTL fitting with 1 x 20 Watt, tube light fitting prewired with all accessories and including LED tube rod 20 watt including connecting electrically to celing rose using PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50 sq mm all as specified and directed Make : Havells/Bajaj/Philips/ Crompton/ Wipro

Supply & fixing in replacement recess mounted compact decorative luminare, high efficiency 2 'x 2' recess LED flat panel with high brightness LED for glass -free homogenenous illumination , lamp type 36 watt LED, wire finish including making connection from ceiling rose with PVC insulated sheathed flexible copper conductor cable 3 core of size 0.75 sqmm , fixture size 600mmx600mmx6mm , complete all as spcified & directed . Make : Havells/Bajaj/Philips/ Crompton/ Wipro .

Supply & fixing in repair recess mounted compact decorative luminare, high efficancy Round recess LED flat panel with high brightness LED for glass -free homogenenous illumination , lamp type 15 watt LED, wire finish including making connection from ceiling rose with PVC insulated sheathed flexible copper conductor cable 3 core of size 0.75 sqmm , fixture dia 8" , complete all as spcified & directed. Make : Havells/Bajaj/Philips/ Crompton/ Wipro

S&F in replacement of MCB 63 Amps TPN 415 V, 50 Hz breaking capacity 10 KA all as directed. Make: GE /L&T//Havells/C&S/Schneider/Standard.

S&F in replacement of MCB 32 Amps SPN 240 V, 50 Hz breaking capacity 10 KA all as directed. Make: GE /L&T//Havells/C&S/Schneider/Standard.

S&F in replacement of MCB 5-16 Amps SP 240 V, 50 Hz breaking capacity 10 KA all as directed. Make: GE /L&T//Havells/C&S/Schneider/Standard.

S & F in replacement of Modular Switch type 5 A flush button single pole one way Make-: Havells/ Standard/ Anchor/ Crabtree

S & F in replacement of Modular Switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal Make-: Havells/ Standard/ Anchor/ Crabtree

S & F in replacement of Modular Switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal Make-: Havells/ Standard/ Anchor/ Crabtree

S & F in replacement of ceiling rose, 3 phase/PVC/Polycarbonate, isolated body Make-: Standard/ Anchor/ Crabtree

S & F in replacement of Isolator single pole and neutral 40 amps, 240 V Make: Havells/ Standard/ L&T/ Indoasian

S & F in replacement of Isolator Three pole and nutral 40 amps, 415 V Make: Havells/ Standard/ L&T/ Indoasian

S & F in replacement of Bell buzzer ding dong AC 230 Volt Make-: Standard/ Anchor/ Crabtree

S & F in replacement of sheet metal enclosure for DBs double door when MCBs to be used Single pole and neutral with 200 Amps rated bus bar 240 V 4 Way . Make: Havells/ Standard/ L&T/ Indoasian

S & F in replacement of sheet metal enclosure for DBs double door when MCBs to be used Single pole and neutral with 200 Amps rated bus bar 240 V 8 Way. Make: Havells/ Standard/ L&T/ Indoasian

M & L for submain wiring with two run of single core PVC insulated & PVC sheathed multi stranded copper conductor cable of size 4.0 Sqmm 1100 volts grade and one run of PVC insulated & PVC sheathed multi stranded copper conductor cable of size 2.5 sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC casing caping of suitable size on surface roof/wall/ceiling including making good the disturbed surfaces of wall etc including taking out old unserviceable burnt/damaged sub main wiring from its existing position complete all as directed by Engr-in-Charge Make for Cable : Havells/ Finolex/RR/ Polycab (Note : Two run of single core cable and one run of earth wire and one run of PVC casing caping and its accessories will be measured as one length).

Material & labour for preparation of old painted surfaces of ceiling fan, exhaust fan & wall mounting fan by scrubbing, cleaning with sand paper/wire brush etc making good surfaces and painting by applying synthetic enamelled first quality paint using spray gun including filling cavities with filler and marking Srl No SM No/MES No with black paint, complete all as specified & directed.

Material & labour for rewinding of AC ceiling fan, 230 Volts, 50 Hzs 1200 mm sweep of any make with appropriate guage super enamelled copper winding wire including allied insulation material such as air drying insulation varnish, cotton tapes, lathered film paper, spacers, sleeves etc reassembling at its position after repair, testing and commissioning, complet all as specified & directed.

Material & labour for rewinding of wall mounting fan, 230 Volts, 50 Hzs 300 mm sweep of any make with appropriate guage super enamelled copper winding wire including allied insulation material such as air drying insulation varnish, cotton tapes, lathered film paper, spacers, sleeves etc reassembling at its position after repair, testing and commissioning, complet all as specified & directed.

Supply & fixing ball bearing 6202/6203 in replacement suitable for AC ceiling fan of 1200 mm sweep/ exhaust fan/ air circulation fan of any make to replace the unserviceable bearing including greasing as required, complete all as specified & directed

Supply & fixing in replacement capacitor, 4 MFD 230 volts, AC, 50 Hzs complete all as specified & directed.

Supply & fixing in replacement capacitor, 2.5 MFD 230 volts, AC, 50 Hzs complete all as specified & directed.

PRATIMA ENGINEERING WORKS

GVR CONSTRUCTIONS

GS ENGINEERS

MAHIRA ENGINEERING & INFRASTRUCTURE

ANJALI ENTERPRISES

SUPREET CONSTRUCTIONS

MVR CONSTRUCTIONS